T410 screen-wash on Wake

Hello

I wondered about a problem I had with... sometimes when the computer wakes mode standby (on battery only) the colors of the screen become very washed out, but eventually subside to normal. It is a normal phenomenon with the T410 display, or is this something I should be concerned? Otherwise, the T410 seems to be a computer very solid.

Advertisement

Never mind, I fixed my problem, it's normal: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-unstable-screen-brightness/td-p/212150

Tags: ThinkPad Notebooks

Similar Questions

  • T410s - screen Auto-Dims the display content-based?

    This is a really weird thing... never seen a behavior in a LCD screen like this before.

    I noticed that the screen very slowly descends the brightness of the backlight, and almost don't notice you at first, when the low contrast images are displayed on most of the screen.

    I first noticed while browsing, but the best way to reproduce the problem is to open two copies of painting, maximize their and make the size of the image fills the screen.  Let one of them is all white and fill another with all gray.  Adjust the brightness of your screen up.  Now alt - tab between the two copies of painting every 10 seconds.

    What I see is that when I leave the gray image on the screen for a few seconds, you can see the brightness of the backlight begin to decline in about 10 discrete steps, more than 3 seconds.  When you switch to the image in white you end up with a dark looking screen, and then you can see as the brightness of the backlight itself upward during the few seconds of couple.

    You will notice the effect more with less ambient light, or by the dos commands and gauge the total luminous power of the monitor in a room dark.

    To be clear, I'm not saying that an image is smaller than the other.  I mean if leave you it on the gray screen for a few seconds and then switch back to the white screen, * after * switch you back, on the next 5 seconds, you will see the total display increasing brightness.

    Sorry for the long explanation, but... I see it?  Or is it some lost 'improving contrast newness' of the LCD?  I'd really like to hear your experience.

    Thank you

    -Jeremy

    I found the solution here:

    http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T410s-screen-turning-white/m-p/215992

    It's a 'characteristic' energy saving.

  • iPhone 6 + no screen no longer wakes up to see the alerts after Upgrade iOS 10

    With everyone I upgraded my 6 + iOS 10 yesterday. Now my phones screen wakes up is no longer to view alerts. The alerts are coming through if I take my phone and click on the button there are present on the lock screen. For alerts work wakes up the screen is no longer? To be clear, I understand that this phone will not supported are raised to turn the feature back on.  My work daily flow there just my phone on my desk. When an alert is delivered in the screen used to come awake for I can quickly look and see if I need to take further measures. Now this is no longer the case (post updated to iOS 10).

    I contacted Apple Support via Chat, but has been disconnected mi cat and could not reconnect. I reset all the settings and re-setup of all parameters. Same behavior, alerts come through its just that no more wake on receipt of these alerts (from any application) of the screen. DND is not lit.

    Any thoughts? My next step will be to become a complete set of backup and wipe and restore. Don't know how else to proceed.

    Hello...

    I have the same problem too, but I'm not able to view it's to show that I am not allowed to post.

    But would like to stress this issue because it is a major problem.

    I updated my iphone 5 (unlocked) but since after MY iphone 5 s is not to wake up when there is a call... the phone rings but the screen remains black. You can't even see who called and cannot take the call at all.  Please urgently update and attach it to the emergency.

    Thank you

    concerning

    applefanboy

  • Satellite Pro A60 PSA65E black screen when you wake up from stand-by

    Hello

    I have a laptop computer (PSA65E) A60 and I am really slow recently so I decided to reinstall windows XP.

    I didn't have the CD that came with the laptop, so I don't know if it was an installation CD or recovery CD.

    But I installed WinXP home with SP3 slipstreamed in him with a folder for all the drivers. I installed without any problem and installed the drivers for the wifi, display etc.
    And yes it has been activated via windows until someone asks.

    In any case when I closed the lid and exploited later I couldn't have the laptop to wake up.

    Well it is but with a white screen, the fans start up and I get all the flashing lights on the front, but no display. I had the mouse pointer once but nothing else.

    I read a lot of forum posts here on all sorts of ways to fix, but I can't get an any of them to work. Tried to get new drivers, got all of the updates from windows update and the bios is the most recent.

    Any ideas on what is happening here, because it is really annoying me.

    Thank you Will

    Hello

    To be clear. The notebooks are actually not SP3 supported and if you want to have good work use OS support Windows XP SP2 home edition.

    I know what you're probably thinking now but all offered tools and utilities are obviously not designed and tested with SP3.
    It is a pity that you n t have Toshiba recovery CD. With the original recovery image, it should work correctly.
    Usually these problems are solved with the updates to the BIOS, but if you have a last I really t know what you can try to fix it.

    As you can see it is very often problematic to use latest updates on older models of laptop.

  • BlackBerry 10 how to stop the expansion of the screen when I wake up in the new os update

    When I wake my Z10 screen develops or grows so I have to squeeze to fit the entire screen. Very boring ideas of how to stop it?

    Hi pgaffney,

    Please see the following forum post for a resolution of this problem.

    Please go into settings > accessibility and make sure that the "magnify" mode.

  • Tecra A9: Screen to not wake up

    I installed Windows 7 on my Tecra A9.

    After a few minutes of inactivity, the energy Manager is the screen off.
    When I turn the mouse to turn it on again it often happens that the screen remains black.

    But Windows did not crash because I see that the hard drive still works.

    Device Manager does not display the device problems.
    The graphics driver is the latest in Intel.

    What say about it?

    Win7 is still not released official and what you use is the BETA version. Toshiba don't offer any proven tools or utilities such as Toshiba power saver for the moment so I assume you are using OS nudes.
    Solutions for these questions can be offered at the start of official support.
    For the time being, you can use Win7 with some BETA drivers but note that these drivers, tools and utilities are not tested.

  • blue screen of death wake mode 'sleep' how to fix?

    I get a blue screen of death to the awakening of fashion 'sleep' how to fix?

    ==================================================
    Dump file: 040515-21762 - 01.dmp
    Crash time: 05/04/2015 14:16:26
    Bug Check String: IRQL_NOT_LESS_OR_EQUAL
    Bug check code: 0x0000000a
    Parameter 1: 00000000'00000000
    Parameter 2: 00000000'00000002
    Parameter 3: 00000000'00000001
    Parameter 4: fffff800'02c8e8ec
    Caused by the driver: ntoskrnl.exe
    Caused by the address: ntoskrnl.exe + 74ec0
    File description: NT kernel & system
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 6.1.7601.18741 (win7sp1_gdr.150202 - 1526)
    CPU: x 64
    Plant address: ntoskrnl.exe + 74ec0
    Stack address 1:
    The stack address 2:
    Address 3 the battery:
    Computer name:
    Full path: C:\Windows\Minidump\040515-21762-01.dmp
    Number of processors: 8
    Main version: 15
    Minor Version: 7601
    Size of the dump file: 276 192
    Dump of file time: 05/04/2015 14:17:28
    ==================================================

    BA

    You can, but until you get the new driver and install it, you don't have to.  A new write more old.

    For the future to uninstall a driver, you go into the Device Manager.

    Start > Search > type Device Manager > click on the device you want to the right of the update (in this case audio devices) click > uninstall.

  • Blue screen to wake up from the sleep and Hibernate in Windows 7

    I had this blue error message screen "kernel_data_inpage_error" to wake up from hibernation in wndows 7. I tried to reinstall windows 7, but the problem persists. Please advise the steps to solve this problem.

    Hi Zen81,

    Thank you for your message.

    I suggest to perform a clean boot to see if a startup program may conflict with the RESUME from hibernation/standby state:

    Clean boot

    http://support.Microsoft.com/kb/929135

    If you have no luck with it, you can test your profile for corruption:

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Distinction between full-screen and wake up

    My application needs to do substantive things when it was thumbnailed and the user returns to him.

    To do this, I logged signal full screen:

    https://developer.BlackBerry.com/Cascades/reference/bb__cascades__application.html#function-fullscre...

    However, this signal appears to be called every time the black screen and I "wake up" the unit.

    What happens much more frequently, an idea how I could discern these events?

    GOD wrote:

    to me, this seems to be a reduced calling bug and fullscreen awake and asleep

    At least that's my understanding of the description of signal.

    I've found a workaround:

    I use onProcessStateChanged and save the last State. If the new State is 1 (foreground) and the last State 2 (context) I start my treatment. When the screen will dim the app goes to State 3 (stop), so I can discern between them.

    I'll also post a bug report on onThumbnail/onFullScreen signals.

  • T510i screen suddenly darkens & increases the gamma

    From time to time, the screen suddenly fades, and the gamma increases.

    This has nothing to do with the brightness settings, since they remain the same (and indeed, increase the brightness still works, but the brightness (maximum) overal remains lowered).

    I think that this only happens when you run out of battery, so it might be a power issue.

    I have this problem since the beginning (about three months).

    But this week, the battery also does not. Maybe there's a fault in the power supply?

    Someone has encountered this problem before?

    Thanks for any help!

    Mark

    Try this?
    http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T410-screen-brightness-dims-washes-out-on-b...

  • The display brightness is automatically defined by content screen brightness?

    Additional for my other problem with the brightness of the screen I also have this question:

    Battery operation, it seems that the display brightness is automatically adjusted by the lightness of the contents of the screen.

    For example if I start a program with a dark background display becomes a little darker. On the other hand, a lighter background makes the screen a little clearer. It is not strong like a tap on F7 or F8 - just a little bit.

    Of course, this is a nice feature. But for me who use many applications as it is a bit annoying.

    Can someone give me a tip where I can disable this feature? Found nothing in the settings of the energy.

    Thomas

    If you have Intel graphics card:
    http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T410-screen-brightness-dims-washes-out-on-b...

    If you have the ATI card:
    Disable the Catalyst Vari-Bright.

  • Apple Watch after upgrade to watch OS 3 - flashing screen after update

    Apple Watch 42 mm

    I recently like millions out there I've updated my Apple Watch to watch OS 3. Today noon 15/09/2016, I noticed that when I raised my hand/wrist to wake up screen Apple Watch it flickered once. I did this action several times to confirm that I clearly understand what was going on. I started to solve the problem, powered off/on power the Apple Watch. Issue continues. I did a reset on the Apple Watch hold the button of the Crown and the power at the same time until the powers of the device and restart. This action eliminates the problem. Apple Watch works as expected, screen flicker stopped when hand/wrist is triggered and screen Apple Watch wakes up to the top. Unfortunately, after some time between 2 and 3 hours of new screen flickering starts. I did some digging online but have not encountered this problem. I realize that the watch OS 3 has only been published days before so I wasn't expecting to fall on part.

    My question: is this a known problem that will be patched with an upcoming release or I'm the first to report this problem? Any information would be much appreciate.

    It is too early to know if it would be regarded as a known issue. This is not the case on my Apple Watch after the update.

    See if a matching and re pairing your watch makes a difference.

    Cancel the twinning of your iPhone - Apple and Apple Watch Support

  • Monitor wakes up while mac is asleep.

    I have a 27-inch iMac (end of 2012), I am connected to an external monitor Lg 2955um-p (29-inch Ultra wide) its connected Via a lightning strike to display the port. So here's the question. When I put the mac to sleep, the Mac and the external monitor turn off as "normal". Then after a few seconds, the external display turns, then falls asleep. This trend continues until I have power or unplug the external monitor. The search for this problem, all I could find was examples of screens do not wake up.

    Check to see if the wake for network access box is selected in the system energy-saving prefrence.

  • MBP frequently freezes / crashes on wake

    I have a MBP 2012 Middle I got in 2013 and have had problems with since day 1. I narrowed down it to / Standby failure (details below), but I have no idea how fix or solve this. Any help would be appreciated. I apologize if I have provided too much information, didn't waste time everyone, asking for things that I should have mentioned!

    H/w: MBP with 8 GB of RAM, USB hub with Mac keyboard, external HD (usually disabled), Time machine (usually disabled) disk and load cables for 2 iPhones attached. Apple bluetooth mouse. Sometimes I plug devices directly in the USB ports (instead of the hub).

    History:

    I take the computer to the Apple store 9 times since I got it. The second or third time (which was a few days after I got it) they replaced with a brand new, however that has not fixed the problem. They have made of the material tests and tests on it for the night and find nothing wrong with the hardware, which leads me to believe it's a software problem. The software that I use most often is Dropbox, Chrome, Coda 2 and Pathfinder, with various other things like Word and Excel from time to time.

    Symptoms:

    Here are some of the problems I had, which seem to occur in wake or shortly after waking from sleep

    • USB ports do not work (frequently - sometimes set by putting the computer to sleep, usually can only be fixed by rebooting)
    • Screen freezes on wake (infrequent - sleep sometimes allows the screen to work again for a minute, then it freezes once again)
    • Slow to wake up (quite frequent - may last from 30 seconds to 2 minutes to wake up once opened)
    • Hangs on the sleep/wake (rare - when open or closed nothing happens, and then after restarting the system about 30 seconds)
    • Various other (all text files have been read that after the awakening, trackpad, listed as "not connected" after waking up, lost the ability to make windows to the front, the points will not force exit, reboot has not etc..)

    Troubleshooting:

    I did a lot of reading on this and that you have not found a good solution. Here are a few things I tried

    • Reinstall OS X (I did probably 6 times since I got the computer, it doesn't seem to help)
    • Repair disk permissions.
    • Updated to OS X (I think I initially was Mountain Lion, now have el Capitan and the problems have persisted through all versions)
    • Reset the PRAM/CMS (I think that PRAM may be an old term, but I've tried both anyway)
    • Antivirus deleted and a few other programs I didn't need more

    Accidents/gels don't happen all the time (last was 2/18), but they are often enough to be annoying. For the last one, I saw it in the newspaper. I think he can relate to Google Sync, which I've since turned it off. I have not had another accident since then, but it's only 4 days.

    [syslog - edited]

    18 Feb 08:04:30 FinderSyncExt MacBook Pro [5437]: failed assertion: 15 d 21: libxpc.dylib + 35399 [61AB4610-9304-354C-9E9B-D57198AE9866]: 0 x 13

    18 Feb 08:04:32 - last message repeated 72 times-

    18 Feb 08:04:32 MacBook - Pro FinderSyncExt [419]: failed assertion: 15 d 21: libxpc.dylib + 35399 [61AB4610-9304-354C-9E9B-D57198AE9866]: 0 x 13

    18 Feb 08:04:32 MacBook - Pro FinderSyncExt [5437]: failed assertion: 15 d 21: libxpc.dylib + 35399 [61AB4610-9304-354C-9E9B-D57198AE9866]: 0 x 13

    18 Feb 08:04:34 - last message repeated 74 times-

    18 Feb 08:06:23 localhost kernel [0]: sleep the error code 0x00000000 0 x 31000000

    18 Feb 08:06:23 localhost kernel [0]: System has rebooted because of lack of sleep/wake

    Journal of EtreCheck

    EtreCheck version: 2.9.6 (256)

    Report generated 2016-02-22 10:20:12

    Download EtreCheck from http://etrecheck.com

    Time 06:00

    Performance: Below average

    Click the [Support] links to help with non-Apple products.

    Click [details] for more information on this line.

    Problem: Another problem

    Description:

    problems of sleep/wake

    Hardware Information:

    MacBook Pro (13-inch, mid-2012)

    [Data sheet] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 572

    Video information:

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    Software:

    OS X El Capitan 10.11.3 (15 d 21) - time since started: about 4 days

    Disc information:

    HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Macintosh HD (disk 1) /: 498,88 GB (37,54 GB free)

    Storage of carrots: disk0s2 499.25 GB Online

    MATSHITADVD-R UJ - 8À8)

    USB information:

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Hub keyboard Apple, Inc.

    Apple Inc. Apple Keyboard

    Action Star USB HID

    Apple Inc. FaceTime HD camera (built-in)

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Kingston DataTraveler 3.0

    Hub keyboard Apple, Inc.

    Action Star USB HID

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Action Star USB2.0 Hub

    Lightning information:

    Apple Inc. Thunderbolt_bus.

    Configuration files:

    / etc/hosts - Count: 1

    Guardian:

    Any where

    Kernel extensions:

    / System/Library/Extensions

    com.devguru.driver.SamsungComposite [no charge] (1.4.28 - 10.6 SDK - 2016-01-27) [Support]

    com.paceap.kext.pacesupport.master [no charge] (5.9 - 10.6 SDK - 2016-01-27) [Support]

    /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

    com.paceap.kext.pacesupport.Leopard [no charge] (5.9 - 10.4 SDK - 2015-06-18) [Support]

    [no charge] com.paceap.kext.pacesupport.Panther (5.9 - SDK 10.-1-2015-06-18) [Support]

    com.paceap.kext.pacesupport.snowleopard [no charge] (5.9 - 10.6 SDK - 2015-06-18) [Support]

    com.paceap.kext.pacesupport.Tiger [no charge] (5.9 - 10.4 SDK - 2015-06-18) [Support]

    /System/Library/Extensions/ssuddrv.kext/contents/plugins

    com.devguru.driver.SamsungACMControl [no charge] (1.4.28 - 10.6 SDK - 2014-12-03) [Support]

    com.devguru.driver.SamsungACMData [no charge] (1.4.28 - 10.6 SDK - 2014-12-03) [Support]

    com.devguru.driver.SamsungMTP [no charge] (1.4.28 - SDK 10.5 - 2014-12-03) [Support]

    com.devguru.driver.SamsungSerial [no charge] (1.4.28 - 10.6 SDK - 2014-12-03) [Support]

    Startup items:

    With MySQLCOM: Path: / Library/StartupItems/MySQLCOM

    Startup items are obsolete in OS X Yosemite

    Launch system officers:

    [loading] 158 tasks Apple

    [operation] 78 tasks Apple

    Launch system demons:

    [loading] 190 tasks Apple

    [operation] 99 tasks Apple

    Launch officers:

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-02-07) [Support]

    [operation] com.amazon.sendtokindle.launcher.plist (2015-11-13) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2014-07-25) [Support]

    Launch demons:

    [loading] com.adobe.ARMDC.Communicator.plist (2016-02-07) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-02-07) [Support]

    [loading] com.adobe.fpsaud.plist (2016-01-29) [Support]

    [loading] com.cocoatech.pathfinder.SMFHelper7.plist (2016-02-16) [Support]

    [loading] com.github.GitHub.GHInstallCLI.plist (2015-03-16) [Support]

    [loading] com.malwarebytes.MBAMHelperTool.plist (2016-02-08) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    [operation] com.mysql.mysql.plist (2016-01-05) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2014-07-25) [Support]

    User launch officers:

    [failure] com.adobe.ARM. [...]. plist (2014-07-23) [Support]

    [loading] com.bittorrent.uTorrent.plist (2016-01-16) [Support]

    [loading] com.google.keystone.agent.plist (2015-12-14) [Support]

    [loading] com.valvesoftware.steamclean.plist (2016-02-20) [Support]

    Items in user login:

    iTunesHelper hidden Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

    Hidden Dropbox application (/ Applications/Dropbox.app)

    Path Finder Application (/ Applications/Path Finder)

    Hidden Google Chrome application (/ Applications/Google Chrome.app)

    Other applications:

    [operation] au.id.haroldchu.mac.Bandwidth.47072 (2015-07-17)

    [loading] au.id.haroldchu.mac.BandwidthLauncher (2015-07-17)

    [loading] com.adobe.Reader.128992 (2016-02-18)

    [ongoing] com.Apple.XPC.launchd.oneshot.0x10000004.Google Chrome (2016-02-19)

    [operation] com.cocoatech.PathFinder.7392 (2016-02-15)

    [operation] com.etresoft.EtreCheck.992 (2016-02-20)

    [operation] com.getdropbox.dropbox.4832 (2016-02-17)

    [loading] com.google.Chrome.160032 (2016-02-19)

    [ongoing] com.valvesoftware.steam.ipctool

    Plug-ins Internet:

    FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

    QuickTime Plugin: 7.7.3 (2016-01-19)

    AdobePDFViewerNPAPI: 15.010.20059 - SDK 10.8 (2016-02-18) [Support]

    AdobePDFViewer: 15.010.20059 - SDK 10.8 (2016-02-18) [Support]

    Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]

    Default browser: 601 - SDK 10.11 (2016-01-19)

    SharePointBrowserPlugin: 14.5.6 - SDK 10.6 (2015-12-15) [Support]

    nplastpass: 3.1.21 (2014-07-22) [Support]

    Unity Web Player: UnityPlayer version 4.6.3f1 - SDK 10.6 (2015-02-19) [Support]

    MeetingJoinPlugin: Unknown - SDK 10.2 (2015-11-14) [Support]

    JavaAppletPlugin: Java 8 updated 73 02 (2016-02-15) check the version of build

    User Plug-ins internet:

    Picasa: 1.0 - SDK 10.6 (2014-08-12) [Support]

    3rd party preference panes:

    Flash Player (2016-01-29) [Support]

    FUSE for OS X (OSXFUSE) (2015-06-14) [Support]

    Java (2016-02-15) [Support]

    MySQL (2014-09-11) [Support]

    Time Machine:

    Skip system files: No.

    Mobile backups: WE

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 498,88 GB disc used: 461,34 GB

    Destinations:

    Backup [Local]

    Total size: 639,79 GB

    Total number of backups: 29

    An older backup: 2014-08-03, 01:32

    Last backup: 2016 - 02-07 at 11:16

    Backup disk size: too small

    639,79 GB backup size < (disc 461,34 GB X 3)

    Top of page process CPU:

    8% syslogd

    4% WindowServer

    4% FinderSyncExt (2)

    3% kernel_task

    3% launchd

    Top of page process of memory:

    906 MB kernel_task

    836 MB Google Chrome Helper (10)

    467 MB mysqld (2)

    459 MB Path Finder

    336 MB Google Chrome

    Virtual memory information:

    808 MB of free RAM

    7.21 GB used RAM (2.57 GB being cached)

    285 MB used Swap

    Diagnostic information:

    February 21, 2016, 17:00:33 ~/Library/Logs/DiagnosticReports/Preview_2016-02-21-170033_[redacted].crash

    com.apple.Preview - /Applications/Preview.app/Contents/MacOS/Preview

    February 21, 2016, 07:37:06 AM/Library/Logs/DiagnosticReports/Coda 2_2016-02-21-073706_ [deleted item].cpu_resource.diag [details]

    / Applications/Coda 2.app/Contents/MacOS/Coda 2

    There may be other issues, but you have installed a client third-data clouds that does not work and should be updated or deleted. It could be drive Google, Dropbox or something like that.

  • Qosmio X 500-058: no recovery after plugging screen down when the HDMI port is used

    When I connect my new Qosimo X 500 - 058 to monitor external (with the help of an HDMI to DVI converter cable), everything works well until the power of Windows application options off the monitor.

    Once this has happened, the screens don't wake up and stays black.
    The PC were not crushed, and if you press Ctrl-Alt-Delete, you get the normal menu options.

    But if you press Cancel, or lock, and then enter the password, the screens go black again.
    This problem does not occur if I remove the HDMI cable and use only the laptop screen.

    I found that if you select the option change user after pressing Ctrl-Alt-Del monitors come back to life after a lot of glitter, if at least I don't have to re-boot each time. Does anyone have any suggestions on how I trouble shoot this?

    Cheers, Alun

    Hello alum

    Have never heard about this but anything is possible. It will be interesting to see if the same problem persists without DVI converter cable.

    When this happens can you use FN + F5 key combination to turn on the transparent back of laptop?

Maybe you are looking for

  • Firefox browser will let me see all the info site. other browser does.

    Key information are not loaded on my banking site using Firefox as my browser. When I contacted my bank they asked to use Internet Explorer and the browser loading all the information requested. My Bank suggested that contact Firefox to correct the p

  • Cannot sweep of the MAC Book Pro using OfficeJet 8600

    I have used my OfficeJet Pro 8600 to scan until last week.  So I rebooted the software of HP and I still can't analyze.  I tried the Apple via AirPrint (version 2.0) drivers, still does not work.  Prints well but will not scan.  10.10 OSX is loaded b

  • Updated RAZR 214 215 leak now?

    Maybe next update.

  • mini 210-1142cl RAM update

    question, is possible to upgrade RAM with a MHz higher than the computer can handle, 1333 MHz > 667 MHz? If so, how? I want to upgrade my RAM to the mini 210-1142cl from 1 GB to 2 GB, According to the manual, the mini can accept an upgrade to 2 GB, b

  • MapView does not display the map

    MapView tutorial sample apps does not display the map on my device. I tried to get out by creating a sample application with lat coded hard and longi, still nothing. In addition, the native application "maps" on the device also fails to show on the m