T410s - screen Auto-Dims the display content-based?

This is a really weird thing... never seen a behavior in a LCD screen like this before.

I noticed that the screen very slowly descends the brightness of the backlight, and almost don't notice you at first, when the low contrast images are displayed on most of the screen.

I first noticed while browsing, but the best way to reproduce the problem is to open two copies of painting, maximize their and make the size of the image fills the screen.  Let one of them is all white and fill another with all gray.  Adjust the brightness of your screen up.  Now alt - tab between the two copies of painting every 10 seconds.

What I see is that when I leave the gray image on the screen for a few seconds, you can see the brightness of the backlight begin to decline in about 10 discrete steps, more than 3 seconds.  When you switch to the image in white you end up with a dark looking screen, and then you can see as the brightness of the backlight itself upward during the few seconds of couple.

You will notice the effect more with less ambient light, or by the dos commands and gauge the total luminous power of the monitor in a room dark.

To be clear, I'm not saying that an image is smaller than the other.  I mean if leave you it on the gray screen for a few seconds and then switch back to the white screen, * after * switch you back, on the next 5 seconds, you will see the total display increasing brightness.

Sorry for the long explanation, but... I see it?  Or is it some lost 'improving contrast newness' of the LCD?  I'd really like to hear your experience.

Thank you

-Jeremy

I found the solution here:

http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T410s-screen-turning-white/m-p/215992

It's a 'characteristic' energy saving.

Tags: ThinkPad Notebooks

Similar Questions

  • Display content based on Login

    I know that we can display content based on whether Yes or no someone is connected or not using {module_isloggedin}. However is it possible to display content based on secure member area is subscribed to?

    IE:

    If a user is logged and a member of Secure Zone 1 content display.

    If a user is logged and a member of the Secure Zone 2 display content B.

    etc.

    I know that it was not possible at some point and I'm not aware of this change. If it has changed? If not, are there plans to implement such a feature?

    Hi Lynda,

    For now, you can't even list the secured area, the user is connected, but you can try this workaround:

    -tell the user can choose between 2 secure areas to log in

    -each secure area has its own landing page

    -create a landing page empty for each secure areas, we will use these proxies

    Once the user enters their credentials, it is redirected to the page of empty destination. On this page, insert 2 pieces of javascript:

    -another one that sets a cookie so that you know how secure area, the user is logged in

    -one that redirects the user to the "Members" page only

    From the point of view of the user simply insert the credentials, login and be redirected to the members only page. The difference is that using proxy pages, you have a way to set a cookie allows you to determine what secure area, the user is logged off and customize the appearance of the page on this basis.

    Hope this helps,

    Mihai.

  • box at the bottom of the screen shows only the secure content shown, do I get rid of this box?

    When on Facebook every time I have move from one page to another box appears a footer that says: "only secure illustrated content" then in blue print says 'what is the risk?' and he says also display content and beside that a red X. If I hit the content page refreshes and if I just hit the red X box at the bottom of page disappears. I can do something to avoid that this box coming on Facebook when I play PUZZELED GAME of HEARTS. Thanking you in advance, sincerely I remain.

    Rick Freeman

    See this.

    http://support.Microsoft.com/kb/2625928

  • Y50-70 screen flashing when the display of flash content

    Hello, I bought a laptop from lenovo y50-70 about a month ago, model 59445062, and I noticed a strange problem when using flash player content on Web sites. When the battery power, playback of flash content is slow and the screen starts flashing like crazy, especially when you start scroling around the page. However, when I plug the charger in all problems disappear and everything is fast and smooth. Student in computer SCIENCE, I have a hinch that it could be related to flash player and driver of integrated graphics, but the test of the integrated on high graphics demanding applications (games) there are no noticeable artifacts or flashing, even on battery screen. I use windows 8.1 x 64, all the updated drivers to update, flash player update. I hope you guys find a solution to this problem.

    P. S.

    I am also attaching a video of the problem in action.

    https://www.YouTube.com/watch?v=K2PpX0r0Nek

    Yep, just recently received my laptop repair, found to be bad cable of the lcd screen.

  • Display content based on comparable date values

    I hope someone can help with this one.

    I'm used to using something like this:

    <?php if ($row_rsProductA['LastUpdated'] > 0 AND $row_rsProductB['LastUpdated'] > 0) {  ?> Content to display if Product A and Product B have both been updated. <?php } ?>


    But how can I do to display the content according to which the date value is the most recent?

    I tried this:

    <?php if ($row_rsProductA['LastUpdated'] < $row_rsProductB['LastUpdated']){ ?> Content to display if Product A was updated more recently then Product B. <?php } ?>


    But it doesn't seem to work.

    If someone could post how to achieve this goal, which would be very much appreciated.

    Thank you.

    First, your comparison operator is pointing the wrong way. If A is more recent than B, then it is greater than B, no less.

    Other that that, we do not have enough information to see the problem. You can provide more explanation and code.

    Dates are stored in this format? AAAA-MM-JJ

    This is the right way to store dates in the database, and they must be stored using the date data type.

  • The display brightness is automatically defined by content screen brightness?

    Additional for my other problem with the brightness of the screen I also have this question:

    Battery operation, it seems that the display brightness is automatically adjusted by the lightness of the contents of the screen.

    For example if I start a program with a dark background display becomes a little darker. On the other hand, a lighter background makes the screen a little clearer. It is not strong like a tap on F7 or F8 - just a little bit.

    Of course, this is a nice feature. But for me who use many applications as it is a bit annoying.

    Can someone give me a tip where I can disable this feature? Found nothing in the settings of the energy.

    Thomas

    If you have Intel graphics card:
    http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T410-screen-brightness-dims-washes-out-on-b...

    If you have the ATI card:
    Disable the Catalyst Vari-Bright.

  • suggest how to display content and control the printing of the content

    Hi all
    H6.
    FORMS 6i worm
    H5.
    There is a button to display in my form, when the user clicks on the button display the content in the form are displayed in a letter format.
    H5.
    the displayed content must be able to print only if the value of the status field is APPROVED.
    H5.
    In all the other status as NEW or CANCEL, user is authorized to view the content in letter size, but should not take print out of the content.
    H5.
    I tried to use reports but not able to manage the "print" key.

    H5.
    Please suggest and guide

    Valuable suggestions will be appreciated ;)

    Thank you
    {: 8}

    Have you tried the code above provided it will disable the PRINT on the report viewer DISABLEPRINT button is hidden parameter integrated Oracle to report

    Add_Parameter (pl_id, 'DISABLEPRINT', TEXT_PARAMETER, 'YES');

  • White line at the end of the display of control project with CC PP

    Hello

    This morning, I discovered a new bug with Adobe first Pro CC and this bug seems to be well known, but no date for the correction, it is available.

    It appears at the end of the last item of the main track of the video: see white vertical and moving to the left of the display content.

    Image N.jpg

    The image of N - 1 displayed is correct:

    Image N-1.jpg

    This screen will appear with any order and photo or video, even in a new sequence created for purposes of verification.

    No bug. Feature. It's the new terminator sequence/media.

  • Y510 backlight Auto Dim?

    Summer to give me an headache for the last month.

    How to stop the Auto dimming the backlight laptop when I'm not touching the mouse or keyboard.

    It's very annoying when watching videos or reading of the literature of confectioners.

    My eyes must constantly adjust to two different levels of light.

    I have looked everywhere on the net and in the system and we tried everything except installing third-party software because that should not be necessary

    Any help is appreciated

    Double-click your energycut icon in the status bar.

    Double-click your power plan that you want to change.

    Adjust as desired.

    Enjoy.

  • music mute app while the display turns off.

    There is a musical project of my hand.

    but the app still mute when the screen will Dim (the playbook in standby mode).

    How to fix coding or config?

    If the screen should be forced to stay in your application (unlikely) then you want to investigate NativeApplication.nativeApplication.systemIdleMode.

    If weather is nice, the screen darkens and the PlayBook goes into sleep mode, but you want your application to continue to play the same music in this case, you want to study QNXSystem.system.inactivePowerMode.

    I posted awhile back with a summary of this feature , and a link to the Knowledge Base article on this subject.

  • iOS 10, screen will not auto dim.

    Hello

    Since I updated to 10, my lock screen and home on my iPhone TO will not be automatically dim or turn off.

    I've updated my lock screen auto to a 30 second time out, but if I press the home button or receive a notification; the screen stays on indefinitely.

    Hi there, CyrenaH!

    Thank you for joining the communities Support from Apple! Looks like you have a problem with the iPhone not dimming properly. I know how it is important to be sure that the iPhone does not stay on at all times! The good news is that there are a few steps, you can try to get this support! First of all, read this article with the steps to restart your iPad, iPhone or iPod touch.

    The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords ready for iPhone upward starting.

    If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

    1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
    2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
    3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

    Have a great day!

  • Zoom in print - preview mode is for the display of the page size or the size of the content on the page?

    Print - Zoom preview.

    When I zoom it changes the size of the page on displays on the screen and it also changes the font size of the displayed text.

    Is this a bug or I'm doing something wrong.

    Either way, I need both the features...
    i.e., I want to change the size of the page, as it is displayed and I also want to be able to change the size of the content of the page - but I'd like to separate selection in box / controls for each.

    Print preview is a scale control, than the 'ladders' everything on the page, text and images. The paper size and margins are not changed when the 'balance', these controls are elsewhere. Basically, a scale of 50% will use half of the sheets of paper to print a Web page, it would be to shrink or 100% to adjust.

    Who answers your question fully?

  • Satellite A500-1GH - sometimes the screen will Dim

    Well, I bought this computer 3 weeks back, and since then, I have a problem with the display. A few times, the screen will Dim and after that, a message appears saying that the pilot crashed and recovered successfully.
    Any ideas that I can do to fix this problem?

    Either way, I'm using Windows 7 Edition home premium and a graficcard of 330M from nVidia. I tried to search the drivers reinstall, but has not found for this specific model.

    Hello

    have you read this thread?

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53941&TSTART=0

  • No way to Dim the brightness of the display on the iMac to 2014

    I bought an iMac 27 inch nine in August 2014. Model no. A1419. It has been manufactured in 2013. As far as I can remember, there has never been the brightness slider in the display preferences and unction keys have never dimmed the screen. Initially, I ignored the problem but 2015 intense brightness became a real problem so I tried everything I could think of to correct it. Advice of the seller's customer support and reseller Apple has not managed to get a solution. More and more, it seems like a hardware problem or something in the Boot ROM. I am now on OSX El Capitan, which actually has no difference.

    Any suggestions please?

    I use the software "Shady"... This allows me to control brightness for as low as possible... you can try it once and check if it works...

  • Display Auto-Dim?

    I generally try to help out here, but I need help or comments on this one

    I have my Xoom screen timeout to 2 minutes and always on when it is connected because I love him now and bright on my desk at work when it is docked. the problem is that the screen remains lit when it is anchored, but will auto-dim so that it is not entirely clear. If I'm in the music player, playing a slide show on the home screen is not serious, it becomes less bright and I have to type to return a full intensity. seems to happen about 3 minutes after leaving alone.

    anyone else notice this or is - it just me, and I missed something?

    Fofana,

    I found a solution, but it will cost you $1 in the Android Market. I bought the app called 'Sun Lock' tonight, installed, and set the lock on 'on '. It worked inactive in the dock now for more than 30 minutes and no gradation. There are many parameters for this thin app (and widget), where you can set several conditions to release or to apply the Sun lock. Given the absence of parameters automatic in the interface of the Xoom, this should more to meet my needs.

Maybe you are looking for

  • After I download a PDF file, it remains in the download list, but when I try to open it again it does not open.

    I have many PDF files that I downloaded. It opens very well the first time without problem. (see 22).When I click on the list of PDF in the download a second time list, nothing opens.

  • Use the TC for backups only, while the computer is connected to a different network

    Time Capsule version 7.7.3 I want to be able to make backups without having to connect to its network via wi - fi, because I'm connected to a different wireless network to access the internet. I thought that I need to connect the TC to my computer wi

  • Photo sphere on Droid Maxx?

    Hey guys,. I was wondering if you guys have found the camera sphere on the Droid Maxx function or know if he could come to our phones in the future? I love this feature and tried it on a Nexus phone before. Everyone that I've shown he thought it was

  • Convert Labview 7.1 9.0 vi vi

    Hello Can someone convert the file from the labview version 9.0 for labview 7.1. Attached file as an attachment. Thanks in advance Vlaminck

  • Polynom - editing

    Hello I want to put in place an order 5th polynomal function. I have to build a trend line in excel that generates the correct formula polynomal. (table.jpg) 1 option: that I can apply this formula in labview? (polynom.jpg) 2 option: what is the prob