T42 2373-CS8 Rescue & Recovery 4.2100016

Similar Questions

• T42 - 2373-CS8

  Windows XP SP 3 installed last BIOS 3.23 incl. Try to install Power Bishop 1.65. Installation is running, all right, but after a reboot, no sign of any MP. Any clue?

  '1.65 V' is only available with the Driver power management

  The recent power management software is either the Battery MaxiMizer V 1.38 or Power Manager V 1.99o for example. T43 download page (works great with T42) but need Microsoft .NET Framework 3.x (if I am not mistaken)

  Both reveal the green symbol in the taskbar

• Rescue & Recovery 4.51 installation failure - Thinkpad L520

  I have Thikpad laptop, L520 and I try to install Rescue & recovery on Win 7 Ultimate x 64, but the process fails every time with "error 25011" just do not locate the correct tvt

  

  What can I do to fix this?

  I had the same luck with the 4.5 version before. Fails to install with the message above

  
  

• Install Rescue & Recovery on Windows 7?

  X61s running Win7 beta build 7000, though. Base OS = Vista Business

  Last month, I have rebuilt the drive using the base image - during the rebuild, I chose not to install a Lenovo Rescue & recovery (R & R). So, I can not access the rebuild option in the start menu.

  R & R facility tests the operating system running and does not install under Win7.

  No idea how I might be able to access partition image on startup without R &R; or a way to install R & R and have 'ignore' the OS installed?

  I was able to install by setting the Vista SP2 compatibility mode.

• Cannot start environmental Rescue & Recovery

  What should be the reason why I can't boot into the environment ThinkVantage Rescue & recovery? After setting hard drive in the BIOS and make pasword recovery defined media, I realized that I can't boot into rescue & recovery. When I push the ThinkVantage button at starup I get stright in the BIOS Setup. Can anyone help to resolve the issue?

  Well, finally I solved the problem without having to reinstall the system. During the boot precess after ThinkVantage touches there is a screen with options (1) to access the bios; (2) to resume normal sturtup; (3) and something about the recovery of the system (I don't remember exactly as I have been unable to repeat the conditions. By pressing F11, I chose option (3) and R & R logo has appeared on my screen. When I started the next time after pressing ThinkVantage I directly in environmental R & R. So it seems that he has no probplems more.

• Rescue & recovery blue screen on T60 with XP and SSD

  Hello world.

  On my T60 (2008-VPT) with Windows XP SP3, I have installed a (Verbatim 240 GB) SSD. I made a clone of the old HD on the new SSD and that I installed it on the T60.

  Everything is fine, but when I try to do a backup with rescue & recovery 4.23, after 1 hour BLUE SCREEN opens.

  With the swap file, the message was KERNEL_STACK_INPAGE_ERROR, I don't put no pagefile, but another screen of blue hour, without display of previous message, but only with the 0x000000F4 error code (0 x 00000003, 0x898E9DA0, 0x898E9F14, 0x805D22AA).

  Any idea?

  Thanks a lot for your help

  Fabrizio

  Hello

  Welcome to Lenovo Community

  Please try to uninstall the rescue & recovery and then reinstall the same

  Try to backup again

  Hope this Helps
  See you soon!

• Please help, CD´s Rescue & Recovery recovery creating problem

  Hello.

  I always get the following message when I use rescue & recovery to create general recovery for my HARD drive.

  Until 4/2008 rescue & recovery has worked. The accepted page 44 doesn´t works not at all.

  "Resources required by this application are already in use.  Please try again when the other application is completed. »

  I Don t want to save the factory settings, but my HARD drive as it is right now.

  R61 Type 8918-5WG professional XP

  Thank you

  Fixed a problem. Just remove the old version of rescue & recovery completely from your HARD drive, before you install a new.

  Don t try to update with the new!

• BK4-T42-2373

  I can't get the wireless controller works on this computer, I tried all the drivers listed, and none of them work.  Device Manager acknowledges a network controller, but when I try to install the driver, I get the message that "the device was not installed because the driver is not found" and yes I used the installation of the c/drivers/.exe...

  Help needed, thanks!

  Product: ThinkPad T42 2373-BK4

  Win XP operating SYS

  Original description: 2373 4WU Base: P M 735 (1.7GHz), 512 MB RAM, 60 GB 5400 RPM HARD drive, LCD screen 14.1 in 1024 x 768, 32 MB ATI Radeon 7500, 24x24x24x/8 x CD-RW/DVD, Intel 802.11bg Wireless Modem, smart 1 Gb ether, UltraNav, Sec, 6-cell Li-ion Batt, WinXP Pro

  Hi and welcome to the forum!

  It is possible that you were installing wrong driver, this time before installing the following driver uninstall all drivers wireless previously installed and install it:- http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/6hwc05ww.zip

  Don't forget to install from C:/Drivers/...exe

  Also make sure you see two devices in network adapters (LAN or wireless).

  Keep us in the loop.

• T42 2373-JXG Type

  Hello

  I have a T42 2373-JXG Type

  I have a problem with an Ethernet controller not recognized in Device Manager.

  Specifically, I know that I have a problem with the wireless network card.

  I don't see it on the Device Manager list and I don't have a wireless network connection.

  I went to the download site of lenovo and precise model, type, OS etc..

  I tried to use all the files available here to solve this problem, but it still does not work.

  I downloaded these files: 1kwc42ww, 1rwc89ww, 7ira09ww, 7vwc15ww, 77wc39ww.

  I have not either the correct driver file or I'm not doing something good.

  Can someone help me?

  Ofer

  Welcome to the forum!

  Here's the right driver for your computer wireless:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-67214

  After you download it, make sure you unpack it in the following directory: C > drivers > win > Wlanath

  I hope this helps.

• Damn backup Rescue & Recovery remove system - steps to manually delete the reg entries?

  After a 3 hour wait, I am convinced that this piece of crap called Rescue and Recovery is the worst of Lenovo systems.   I had 4 backups using 43 GB.  I wanted to delete all, because I need the space.  So I went to the R & R through Lenovo (T410) of the cutting-edge tools and it shows 4 backups (1 for each month spent).  I thought that I should start with the oldest backup.   So I hit the button remove next to the oldest date I saw there, and it has been running for 3 hours and there is no end to this, I think, even if the hard drive shows activity.   I wanted to post here to see if the process ends the 43 GB of compensation from one day to the next.  I am ready to leave my PC to work from one day to the next, if others have noticed that it is a slow process, beyond imagination.   But, if I kill this process in the middle and remove the C:\RRbackups manually in the file system, which will mess up other parties (such as the registry).  So I wanted to see if anyone knows the necessary manual procedure (after the murder of this process) to a clean deletion beyond file system.  I sat with this shit called Rescue and Recovery for most of today, and it makes me think that this software is too crappy than DELL.    Frustrated...

  I can't answer why it takes so long to just perform a deletion, but I'd let it run the course as long as you see the disk activity.

  I know that if you uninstall Rescue and Recovery, then wipe the previous backups and your backup disk, reinstall Rescue and Recovery and start over just too.

  Good luck

• Rescue & recovery problem

  I have a t61p. I also have the full Lenovo product recovery discs.  I wanted to give my laptop a charity so I decided to use the disks RRD to restore laptop to factory settings.  I used the completely erase the HD and restore disks.  It went well until the end.  Now whenever it starts up it comes up with the RR menu.  I'm not coming with WinXP that was installed initially.  I have not all discs in WinXP.  It is on the Lenovo product recovery discs?

  I thought that would restore it on the PRD discs original settings but I can do something wrong.

  Help!

  Stiltrying

  I found the answer via Google and here it is for anyone who has the same problem.

  1. If you have the Lenovo product recovery disks then run the complete set of disks.  This will completely erase your hard drive and copy backup the original factory programs.

  2. Once you have done this, restart your laptop and it will go back to the right in the Rescue and Recovery menu.

  This time, just say to restore settings without using any cd inserted in the cd drive.

  Apparently, all the first no execution is copy the programs to HD.  When you run the second time without the disks, there is no drive, the operating system, installation etc. Since the copied files.

• 3000 C100, re - install XP, no Rescue & Recovery option.

  Hello

  I have a Lenovo 3000 C100 0761 equipped of Windows XP and you want to wipe the hard drive and restore it to the factory setting.

  Some time ago, the C drive has been partioned install Win 98 for some software that did not like XP. Later the partition has been deleted and C drive back to its original state. Now I don't get an option to enter Rescue and Recovery when I press the Lenovo Care button on the splash screen. The hidden partition is still in place and has not been affected. I suppose that the master boot record has been changed when you change the drive C partition.

  How to restore the Lenovo care button options of rescue and recovery.

  Thank you for advice or suggestions.

  Concerning

  Chris

  Thanks for your quick response. I could not find a way to burn discs using the recovery partition. I don't know if what I'm trying to do is clear. I want to erase the existing installation of Windows and do a clean install to return to factory settings.

  Chris

• Delete \RRbackups without Rescue & Recovery

  I found that the RRbackup is almost monopolizing the hard disk space. Now that I already deleted Rescue and Recovery, is it possible to simply remove C:\RRbackups manually?

  Problem solved. "Treeview" shows and deletes files.

• Edge 525 & Rescue & Recovery without recovery Partition but discs

  I went to restore my laptop to factory setting, but to the rescue and recovery application, I don't have any possibility to recover on the laptop as it came out of the factory.

  When I got the laptop, I created rescue media and have a set of 4 discs, all (2 are 8.5 GB) DVD. The R & R boots and asks the Final C drive. None of the disks appear in the backup list box.

  Before I left for a new installation by using a Windows 7 disc, I got R & R OFF load media to a portable player. This will start to a different version of R & R similar to the walkthrough of 2008 post. But the screen I get is not the radio button for the restoration of the factory, just backup and when I put my DVD in, no backup copy is in the media, I have...

  I deleted the partition from the factory after that I created the media as I presume I could go back to the factory to use.

  My new installation of windows 7, it works but the download driver Lenovo Wireless does not activate...

  wish I never started to mess with it now...

  Any suggestions?

  Update: all restored and running again...

  Must label better records in the future... I have had 4 drives in a bundle, the first being the emergency repair disk, which starts with a similar screen.

  As 1 of my records did nothing in the rescue and recovery various application, I used previous thinkpads. Turns out it was bootable and the good relief and recovery for my game disks... cdrivebackup.swm took forever to load, and then asked for the second disc. Transformed and now 1 system that works again...

  now to move all the data back...

• T61 rescue/recovery Mess up

  I wonder if someone has been in this kind of a mess as well. I have a T61 that comes preinstalled with 32-bit Vista Business and a free XP downgrade option. He is now out of warranty. I tried to restore my computer to factory settings. I inserted the disc Rescue and Recovery (I had done once before) and it is somehow installed XP Pro without telling me. I was in for a shock when you have completed the procedure of 6 CD. Desperate to get back to Vista installation, I tried the Vista recovery CD and found that it had removed all existing partitions. I can nor operating system uses now. I have a full disk on the back of the Vista installation but thinkvantage keeps telling me that the system cannot be restored! It has consumed a lot of time.

  All advice?

  Thank you!

  GTAN!

  I had downloaded a Vista recovery on the net image earlier. I used it to repair the installation of Vista after restoring a backup, but apparently, it blew everything; I couldn't even drive through Ubuntu live. Then I restarted and command prompt sets the bcd (bcdedit). The partition information it says unknown that had to be fixed. Fortunately, I have everything back now.

  Happy Days!