T430 install W7x64 without the CSM support

Similar Questions

• I have an IBM PC camera, but do not have the installation CD. How do I install it without the CD

  I have an IBM PC camera, but do not have the installation CD. How do I install it without the CD

  Hello

  What is a model supported by your version of Windows? You could just plug it in and see if Windows recognizes
  and they get the drivers off of the internet. Although it is recognized that you should always check the manufacturer's website
  new drivers and control software.

  Check with the site of the manufacturer of the camera brand and model you should be able to download the necessary software.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I re - install vista without the disc, because I only have the key encoded on the computer.

  How can I reinstall vista without the disc and remove windows 7 (an illegal version) also without the disc. I have only the original vista coded key stuck on the computer when the vista system installed on the purchase of the computer. My daughter was not happy with vista and had someone to install windows 7, which turned out to be an illegal version.

  Hello

  If you have a recovery partition likely has been cleared by installing Windows 7.

  You can try the recovery partition, no guarantees.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Re-install Windows without the original disk Windows 8.1

  Hello

  I use windows 8.1 right now, I need to reinstall the windows and doing it is another. I don't have the original windows disc. Is it possible to reinstall without the disc?

  In this case, you can reinstall Windows 8.1 by downloading and using ISO images from the link below provided that you already have the product key for your version of Windows:
  https://www.Microsoft.com/en-us/software-download/windows8ISO

  Once you have downloaded ISO image and created the installation disc, you can reinstall Windows following the instructions mentioned on the link below:
  http://Windows.Microsoft.com/en-us/Windows-8/clean-install

  Hope this will help you.

• Install codecs without the drive

  You can install only codecs? Apple has ended support for Windows users, but the codecs are all that I need. I can even dump my iPhone on this service. It seems to me that Apple has turned their backs on all users of windows and I forgot that we always buy Apple products. It's a site too gross in my opinion.

  Apple ended the support of Windows for a 11 year old product. Things like this happen ever day.

  Use another player like VLC. No required additional codecs.

• Install drivers without the software fingerprint reader?

  Since my last question has been answered so quickly and so well I thought I'd try one more.  Are there any drivers to install just the device without additional software, fingerprint reader that comes with it?  I do not want to use the fingerprint reader, but don't want a device not recognized in Device Manager.

  Thanks for any help.

  1. you can extract it with winrar or 7zip setup32.exe.

  2. to disable finser scan from the bios-> Security-> access e port / s-> Fingerprint reader-> disable.

• I have a disc to install my adobe acrobat xl level but my habit to drive door open.  How can I install it without the disc in?

  I have a standard xl adobe drive but my habit of door open disk how can I install this with my serial number without putting the disc in?

  Hello

  Please see the link below for download: -.

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

• How to install updates without the disks when he asks?

  I am trying to install an update for Microsoft Word 2002, which is preinstalled on my computer. I did not all software on the disks when I bought the computer again. I have the certificate for Windows which accompanies it.

  In the installation of the update for Word, he gets up then invites me to insert the disk for Word because he needs a certain file. It is rather impossible for me to do.

  Any suggestions? Thank you

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  They will help you with your Word question in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I install CS4 without the disc?

  I tried to move the files to an external hard drive to my new computer, but I can't find how to get the programs to work on my new computer.  I have the old computer with the right to work here beside me CS4 and I disabled the CS4 on the old computer, but when I try to open applications on the new computer, it gives me an error stating that the license has expired.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important article Instructions on the pages to download to this site or the download may not work properly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

• Can MapPoint 2011 - be installed without the substitution of previous versions?

  I need to be able to keep older versions of MapPoint on my laptop while having access to 2011.  I could install 2009 without the substitution of 2004 and 2006, but my IT people say it cannot be done with 2011.  Can he?

  Hello

  Check with the help of MapPoint and in the MapPoint Forums.

  Highway, Streets & Trips, MapPoint - Forum
  http://social.Microsoft.com/forums/is/streetsandtrips/threads

  MapPoiint - Support
  http://www.Microsoft.com/MapPoint/en-us/support.aspx

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Can I install CC without synchronizing all the 100 GB of files on my new computer?

  I bought a Macbook Pro with SSD 256 so my 100 GB of sync I cloud of adobe

  feels so bad. I can install it without the synchronization files?

  Or do I have to install standalone applications?

  Thank you

  Nikos, you can turn off synchronization, please see: click the gear icon > preference > creative cloud > files > power Sync

  

• How to install printer without disk

  my printer is brand new, installation disk has not been closed, and I was not able to install it.  It's HP Photosmart 5512, with web, copying and scanning print.  How do I install it without the disc.  Otherwise, I have to go back to Wal-Mart.  Help, please

  Hello

  Please visit the following site to download the drivers for your printer. You must choose the right operating system for your computer (s):

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5063611

  Kind regards.

• How to install "Additional language supported" in Windows XP SP3 without the CD?

  I have a valid duly licensed Widows XP SP 3 installed on my PC. I have the product key but that you do not have the Windows XP CD with me. Now when I try to install "Language support additional" icon "Option Regional & language ' in the Control Panel, he asks the Windows XP CD (which I did not). Can anyone tell how I can install Supllemental Language support without the Windows XP CD?

  Hello

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  You can follow the steps listed below, when it prompts for the windows XP CD:

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. click Start, click run, type regedit in the Open box and then click OK.

  b. find the following registry key:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

  (c) in the component, right-click ServicePackSourcePath, click modify, type %windir%\ServicePackFilesand then click OK.

  If the steps above does not help then you may need to contact the manufacturer of the computer for the Setup disk.

• I have windows vista without any sp and I learn that the support for sp1 a few days later purposes. Can I install sp2 without sp1?

  And given that support ends for sp1 and ended last year for free from MS, windows update will not work for me as well as to download them?

  Can I order the DVD of one or two of microsoft?

  In http://windows.microsoft.com/en-US/windows-vista/Learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  I found below the address for orders, but it gives access denial of my pc.  Is it valid?

  https://OM2.one.Microsoft.com/OPA/validation.aspx?storeid=1a7e5dd8-0088-46ce-a7d3-8fa1ab523be0&LocaleCode=El-GR

  I contacted the local support (Athens, Greece) but they can do nothing for me, they said that MS DVD are not available locally.

  Hi Vassiliki,

  Unfortunately, if the files are infected you may very well end up having to re - install Windows. However, there are steps in this KB http://support.microsoft.com/kb/249694 to try to back up and restore Vista which may allow you to keep the programs you have.

  Another alternative would be to called a upgrade on the spot if you are sure that the files are cleaned and the infection is gone this solution should leave your programs and data intact and repair the damaged parts of Windows.

• How to install Vista from the recovery disk without defining partitions?

  Hello

  I have my recovery disk and I have installed a new 320 gb HHD.
  When I installed the recovery disc, it re done the 160 GB partitions in each (2 partitions more the 1 recovery partition)...

  But I want to dual boot with XP pro because of software problems and I prefer it sometimes...
  I redid my scores, 1 - 51 GB for XP pro(32bit), 2nd - 51 GB for vista (32 gb) and the 3rd - 210 gb is for storage

  How to install with Toshiba vista o/s and stuff that comes with it on the recovery disc, immediately to the 2nd partition without affecting how I configure the hard drive...

  I have about 100 GB of photos, music, and cam vids on storage, with nowhere to put them, so I can't risk, because some are copy only (so it might be a good idea to let me know how I save this s on my storage spread in the DVD please)

  If I can t, then can some1 please tell me how to get my Toshiba OEM vista off this recovery disk or a link for me?

  Hope all this makes sense lol... Thank you
  Shane

  If you have so much important material best save is to buy an external HARD drive and copy all this stuff here. I recommend buying the small 2.5 external HDD and when necessary, you can take with you and connect to any computer, if you want to view or copy this file. External hard discs connected to other computers with a supplied USB cable.

  Return to your partitions.
  When you use the original Toshiba DVD facilities, you will have 3 partitions.
  WinRE - partition and it belongs to the Vista operating system. This partition is not visible, and this isn't some sort of Toshiba recovery partition
  -C for Vista partition
  Or-d/E to the DATA in the partition. This partition is recorded recovery image in the folder called HDDRecovery
  I don't know what model of laptop you have, but this configuration is on all new Toshiba laptops shipped WITHOUT recovery media.

  Using Toshiba recovery media, you will be able to get exactly mentioned structure of the partitions. Support to recovery facilities using you WILL NOT be able to install Vista on the second partition.

  So if you want to have the dual boot with Windows XP Home edition, you can do following:
  -At first, you are going to install Vista with support of recovery and on the second partition, you are going to install your version of Windows XP Home edition
  -At first you will be installing WXP and then you can install Vista on the second partition, but you must use the Microsoft facilities drive. Recovery media can not be used.

  That's all I can say from my experience with such things.