T430 recovery partition does not

The recovery on my T430 partition doesn't seem to work - I can't create a DVD out of it (ends with an error "rc = 9"), nor can I use the partition itself for recovery (the process starts but fails). How can I get a DVD to use?

Nice day!

in your case, the best option is to contact the Service and request a set of recovery DVDs.

http://support.Lenovo.com/en_US/detail.page?docid=PD008370

Kind regards.

Tags: ThinkPad Notebooks

Similar Questions

  • HP Pavilion g6-1278sa recovery partition does not

    Recovery partition does not work after the creation of new partitions. Where can I get the restore CD?

    Hello

    You can order a set of replacement recovery disks using the link below.

    http://support.HP.com/us-en/document/c00810334

    If you have a problem with this link, order them directly from HP.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    Kind regards

    DP - K

  • error 0xC0000225, recovery partition does not start

    Hello

    I have a HP dv7 with Windows 7 Home premium 64-bit.

    A few months ago, I did a factory restore, the recovery partition start (I have no recovery disks). After that, I thought to divide my C: partition where Windows is installed, and I did it with Windows disk management.

    So my new scores were: C: D: with recovery, OS, E: HP_Tools and g.: the new partition.

    A few days ago the sistem ran very hard, so I thought I do another factory restore from the recovery partition. When I rebooted and you press F11, I got the "0xc0000225 error".

    I have a Windows 7 Home Premium 64-bit bootable drive and I tried Startup Repair tool and other repairs of sistem, checks HDD, but everything seems to be ok.

    I reinstalled the operating system, from the disk bootable on C: (OS starts and works well) and let the other partitions as they were... but it seems that the recovery partition still does not start if I can do a restore from the factory with all the drivers and utilities, as they were at the beginning.

    Any ideas on how I can do?

    Thank you!

    It seemed that it there was not much I could do about this problem. My disk is dynamic, there is no Recovery Manager from the Start Menu, there has not been any creation of HP with HP folder recovery support. I managed somehow to make a repair disk, I tried it but no results, the error kept popping out every time.

    I inserted the Windows 7 disc to try to delete all partitions, including the recovery and HP-tools and do a Windows Installer Cleanup, but the Format, New and Delete buttons are inactive.

    I did some scans disk and memory tests, everything was ok... I started with a disc of Hiren and accesed the HARD drive with a program based on linux and so I managed to delete the partitions.

    After I installed a new copy of Windows 7 to work with my SN and everything was ok. Unfortunately I lost partitions recovery and HP-tools, but at least it works well again.

    Thanks for your all your support.

  • Recovery partition does not not to CDR Manager

    Hello world.  A person cannot solve my pb?

    I have laptop Hp Pvilion Dv6-1355dx. I bought it in January 2010. Until this month, it was working fine. But now I have a pb of HAV.
    Actually I was recovering from my windows 7, there is disruption because of electricity pb. After that the BONES of my laptop was not load and I cldnt find recovery manager. Then I installed the new windows 7. (because I also do not HAV recovery disk)
    My Hp software are not damaged, I installed hp software fm my laptop, now the BP is MY RECOVERY MANAGER IS NOT ABLE to INSTALL, I can still see RECOVERY PARTITION here.
    Now what to do?   Please tell me how can I use my RECOVERY PARTITION with Recovery Manager.

    forward.

    Concerning

    It sometimes works for a start-up Recovery and do a factory restore.

    1.right - click on the "Computer" icon and select manage.

    2. This will launch the Microsoft Management Console.

    3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.

    4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."

    5. when the warning message appears, select 'Yes' – Reboot and it will automatically start in the Recovery Manager (without press F11).

  • Recovery partition does not start!

    Hello dear forum participants!

    I have computer hp pavilion dv6 laptop, recently I reinstalled original OS (win7 home 64 bit that comes with the laptop) to win7 Home premium.

    Now I want to return to the default settings, and I'm unable to start on the HP Recovery partition.

    When I press F11 at startup it boots regular OS, but not the HP recovery software.

    How can I get my work as a recovery partition?

    Problem has been solved!

    It seems that recovery partition boot records have been corrupted by the installation of the non-native OS, but the directory structure and files were intact.

    Steps performed:

    -J' created the recovery USB using HP USB recovery Flash Disk Utility disk

    Link: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-77449-1&lc=en&dlc=en&cc=us&lang=en&os=4062&product=4057188

    -Fact flash drive bootable using EasyBCD utility

    Link: http://neosmart.net/dl.php?id=1

    just add a new entry to point the finger removable WIM image, see documentation for EasyBCD

    http://NeoSmart.NET/wiki/display/EBCD/EasyBCD+documentation+home

    It's quick and dirty solution, there will be more estetically without creating recovery USB drive, simply add the for the recovery partition boot record.

    Thank you all for attenction!

    IonCannon

  • HP Pavilion G6 - 2221ES: recovery Partition does not work after update from HP.

    Hello

    I've just updated my laptop using this patch from HP: sp63774.exe

    It was supposed to fix a recovery environment that slows after reclassification of 8.0 to 8.1 Win Win

    Now, I can't get into the recovery Partition.

    It justs gets stuck after the message: "Please wait...". ».  I get the options to restore the system. Just a black screen.

    link to patch   (Section Software-Solutions)

    Help, please.

    Thank you.

    Hi @jose2016,

    Thank you for the update.

    Did you create your recovery media before making the update for Windows 8.1? If you create a recovery USB disk, then a labour recovery partition. Create a recovery USB disk (from support.microsoft.com). You can access the Recovery Manager of Windows? Computers HP - performing a recovery of HP (Windows 8) system. Another link that can help with the Recovery Manager's computers HP-HP System Recovery troubleshooting (Windows 8)

    You can try to do a restore back to before the update has been installed? Computers HP - using Microsoft System Restore (Windows, 10, 8)

    You said that you do not have a recovery partition. If you select disk management, should always data on this subject and he is in good health?

    Were you able to boot in safe mode?

    Have you tried to run the troubleshooter in Windows?

  • How can I reinstall Windows 7 Home premium on my MSI FX600 OA if the recovery partition does not work?

    So, I bought this laptop MSI FX600. It had Windows 7 Home premium OA (OEM I guess). It also contains a recovery partition.

    After awhile, I had to reinstall windows, so I downloaded an iso of windows, put it on a USB key and reinstalled. but the product key doesn't work though I should be able to use it because it is not used by any other computer. How can I reinstall windows and activate with the product key OEM on the bottom of the laptop? somehow the recovery partition no longer works, so that will not help either. Also, where can I download the iso right for reassembly?

    too bad that I already fixed it. I installed the version English, but anyway my laptop only supports the Dutch version. Thank you for your abundant answers.

  • Recovery partition does not

    Hi all

    I'm a newbie on the site and would very much appreciate if you wise experienced could help me with this one.

    I have a HP Compaq dx2250 desktop running xp pro 64 bit. It is about four years old now and normally works fine until about a fortnight ago. The system becomes slower and slowest of the day. Video and audio are now impossible to watch. I scanned for viruses and malware, clean all the files, defragmented, and it's always the same. I have G.bytes of free space on the disk, so I decided to do a recovery reinstall from the recovery partition. Press F11 or make windows, and the result is the same. He goes through the process to return to factory settings, then stop at a window 'Restore more CD'... ?? I chose the language option and then get the following message.

    "Restore Plus CD error.

    Restoring more cd is designed to work properly on HP computer systems only. »

    It is a real system of HP, I started to plant one or two time settings in the past with no problems. I never had the recovery partition, I've never had any CD I'm stuck with a PC crawl along at a snail's pace. Please help me... !

    Thanks for any help on this

    Hey, Alex:

    If this isn't a motherboard HP dx2250 you have replaced the one with (perimeter), then recovery disks don't work either.

    You will need to purchase a copy of XP or get a XP OEM installation disc and use the product key at the top of your PC case to activate the installation.

    If you replace the motherboard with a card mother dx2250, is the serial number and model # present in the BIOS?

    If this isn't the case, maybe that's the problem.

    If it isn't there, you can use this utility to reset the serial number (and possibly the model number) in the BIOS.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=PSG_I14992-36908&prodTypeId=12454&prodSeriesId=316720

    You cannot run this program by an internal or USB floppy as the file checked out when you double-click to run it and request a floppy disk to be inserted into a floppy drive, then the file creates a boot disk with the necessary files to change the serial number.

    Paul

  • ENVY 15 3040 nr recovery disc does not

    Hello

    I made a recovery disk set as soon as I bought my ENVY 15. I accidentally deleted all partitions, then tried to recover by using the disks that I did... but I get this error by...

    The system recovery media does not support this computer.

    You are not able to restore the system with the media.

    0110 A9P60UA #ABA - A9P58UA #ABA

    Help, please!

    Hello

    Assuming that it's just a problem with the recovery media, here's another solution, you can try.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • the system recovery media does not support this computer

    I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

    Hello

    You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

    There are a few options available.

    1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

    2 create your own recovery media to use to run the installation - it would be my personal preference.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

    Windows 7 sp1-iso-official-32-bit-and-64-bit

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    All pilots additional and the software, you may need can be found here.

    Kind regards

    DP - K

  • Published: Recovery Partition do not have day

    I posted this under Yosemite, instead of El Capitan - very sorry.

    I ran updates on iMac 10.11.6 10.11.5

    The update has not changed the recovery partition, it is still at 10.11.5

    Ran 10.11.6 combination update, still do not update to recovery partition.

    What should I do to get my recovery partition in harmony with my primary OS version?

    Thank you!

    What makes you think that your recovery partition is not up-to-date?

  • Satellite A30 - 203 - recovery disk does not work

    Hi all

    I have an old Satellite A30-203 and have a problem. I tried to format my laptop but the product recovery cd does not seem to work in deletion the data on my disk, its becomes blocked during loading files of ntfs? Now I am not able to retrieve a windows session would I need a new product recovery cd and would be able to get it?

    Thank you

    Hi dimation,

    It is difficult to say what is the reason of this but made is either it s a laptop problem itself or the recovery disc (e.g. scratches) causes this problem.

    In my opinion the best way to check this using a Microsoft Windows disk. If the installation completed successfully, you need a new recovery disk. As a result, you can ask a service provider authorized in your country! :)

  • For 1000-zx satellite recovery disk does not work

    XP Recovery disk does not work. The 3 options are unresponsive. Is there an easy solution. All other functions of cell phones seem ok. It is a reliable machine for more than 3 years, but now must use the recovery disc. Brilliant ideas greatly appreciated.

    Hello

    Well, I put t know why you recovery CD doesn t work. Have you checked the CD some scratches? Have you tried to clean this CD?
    However if it of impossible to use the recovery CD, you can contact the ASP and buy a new one. It doesn t expensive.
    In addition, you can install an original Windows operating system and then all the Toshiba necessary drivers on the Toshiba site.

    Good bye

  • Portege M200 recovery process does not work

    I want to re format my old M200 of 4 years using the original recovery disks (4).
    The recovery.txt file that is stored on the first disc advise me of a process for this, but also States that "this utility does not if the drive has been formatted or converted to NTFS.

    My C drive is NTFS, and the recovery process does not work.
    I'm unable to find any other documents or files on the drives to advise me what to do help.

    I would be greatfull for anyone who has experience with this issue who can advise me on the correct process to run my recovery on a drive formatted as disks

    NTFS.

    May I ask what laptop do you have: is it a M200 Satellite or Portege M200?

    How have you tried to recover the laptop?
    Have you tried to boot from the CD?

  • HP530: recovery partition has not installed

    Reinstalled the operating system, destructive, with SE recovery disks. The recovery partition has not been installed. Any comment as to the reason would be appreciated. Thank you.

    Hello

    No, your brand auto recovery pricing won't recreate the recovery partition. If you want to re-create the recovery partition, you need a set of HP to perform the factory restore.

    Self made pricing factory restore will only effect C: partition

    Kind regards.

Maybe you are looking for

  • in FF29, by clicking on the tabs does nothing

    After installing FF29 strange things had changed.1. the yellow button in the upper left corner, used in place of the menu bar, had disappeared.2. the tabbar cannot me moved to the bottom of the bookmarks bar.3. all the tabs chrome is identical and bo

  • White single web page

    HelloI love Firefox, but a page does not load.I just see the word 'Fact' at the bottom left of the page and a white, white screen. Loading the page perfectly using Chrome and IE8. All the browsers on auto update. It's exactly the same thing on anothe

  • Display empty satellite 5005-S504

    My LCD screen turns white, with nothing else. Any suggestions about where to look for problems?Billco518

  • Turn off the monitor and input block

    Hello I am trying to create simple VI that will turn off the monitor (or screen saver turns on) and entrance to block mouse and keyboard - user so won't be able to see the screen and do any action. I use system32.dll for this. My problem is that when

  • 64-bit Vista will not install service pack 2

    I'm running the 64 bit version of vista buisness. I tried to install service pack 2 using the automatic update, but it has not installed. I also tried the manual download. He gets to halfway done installing, then gives me an error 0x800f081f code. He