T440p stops after reboot

My T440p has a Samsung SSD and Optimus. I use full disk encryption and boot legacy ata.

When I use Windows 8.1 the laptop restarts without problem. Even at the restart of the installation of Linux. However every other operating system reboot (I tried different versions of Linux and OS X), it gets until the thinkpad logo appears and then it just turns off. Then it may normally be started and everything works fine.

It's just a bit annoying, because I often change operating systems and full disk encryption ata remembers the password resets. If of course it stops instead of reboot, I have to re-enter the password each time that I reboot.

Someone has an idea what is the problem? That may be due to some changes in Haswell, or a new feature in bios intel? (Disabling Intel RapidStart has not changed anything)

I have had no recent experience with LILO, but most of my ThinkPad are dual-boot Win-Fedora, and I always leave the Windows bootloader in charge. And as you do, I disable UEFI and all run them on legacy startup.

Your problem may lie in the configuration of the HD password? It's the first thing that comes to mind that this could

security related.

Tags: ThinkPad Notebooks

Similar Questions

  • Bluetooth speaker stops after reboot

    I have a blue tooth IDM8 iHome speaker.  I can add it without problem and it will play a sound, but if I turn off the speaker and back on is no longer works.  I have changed to the default drive and can see his bar up and down as his is assumed to be coming from the equipment, but it's not.  I should add again whenever I turn it off what can I do to solve this problem.  Site of manufacturers are no longer supports the device and can not find the drivers anywhere.

    Hello

    1. What is the number of brand and model of your computer?

    2. have you connected Bluetooth speakers via Bluetooth dongle?

    Follow the methods mentioned below:

    Method 1:

    Configure the Bluetooth audio as audio device in Windows 7 by default. To do this, follow these steps:

    1. click on Start button and then click Control Panel.

    2. in Control Panel, click hardware and sound.

    3. under his, click manage audio devices.

    4. in the box of his , click the read tab, select the Bluetooth device, click set as defaultand then click OK.

    5 restart all media programs that are currently running.

    Method 2:

    Run the fixit available in the link below and check if that makes a difference

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    I hope that helps!

  • Top of the Tower stopped working, no reboot. Stop after BIOS and black screen then

    Data;
    Computer HP Pavilion dv9000

    MS Vista operating system

    Process;

    When I start the computer, it stops after the session of the BIOS and just give me a black screen empty, with a marker in the upper left conner.

    As I have no recovery CD, I can't do anything (software installed when I bougth the PC without any CD included).

    I have a good software entering (and identification number is located on the computer), but I can't find anywhere to download on a recovery disc (CD)?

    Very frustrating!

    Hello

    There are several methods to reinstall Vista.

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    "How to replace Microsoft software or hardware, order service packs and replace product manuals.

    http://support.Microsoft.com/kb/326246

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • El Capitan keyboard does not not after reboot

    I have a Macbook Pro 13 inch with OS X El Capitan 10.11.6

    After one of the recent improvements, I met a problem, if I take my mac, the keyboard and the trackpad to respond enough lag (if I constantly try to move the cursor, he'll have a time and then for like half an hour it will completely stop responding and after this the other repeats). It only happens after reboot and only on the login screen. So if I put my mac to sleep and then wake up, everything will work perfectly. Same thing if I managed somehow to connect, once the keyboard and trackpad respond correctly. The only button that works fine after reboot is the power button, but it doesn't help much, because it charges does not solve the problem somehow: as soon as the user selection screen, keyboard and mouse stops responding again (or should I say "start answering from time to time").

    I saw lots of questions here on the keyboard does not not after waking up, but as you can see, this isn't my situation.

    Try again in Safe Mode.

    Start up all by holding down the SHIFT key. It takes five minutes longer because it is a disk first aid on the way up, and you MUST provide your user name and password, even if you normally the automatic connection.

  • Can't use Firefox once after reboot my Mac, then he won't.

    After reboot or a total, followed by the setting stop running, I get use of Firefox. Once I close out of it, I can't hire back in.
    I checked and updated Firefox, no help. I am currently running Yosemite on my Mac.

    I tried a Force Quit on Firefox. Notice that the small point under the Firefox icon is missing. So, I then clicked on the Firefox icon and it has jumped up and down. Alto! I can now engage Firefox without having to restart my computer. So does that mean Firefox did not leave on its own? And why all of a sudden start. Inquiring minds. If with that I seem to be OK once more. How weird.

  • Satellite L is not start after reboot or shutdown

    Hello

    My phone after reboot or shutdown is not starting.
    I need to turn off the computer and wait 10 seconds and try again, after it start ok.

    All suggest?

    Thank you
    Dvir

    Difficult to say why this happens
    Did you test the HARD drive for a possible damage?

    Test the drive using HDD Drive Fitness Test.
    The HARD drive is perhaps not entirely correct and it must be completely stopped before you start spinning once again

  • Satellite C50-A-172 - no Toshiba logo after reboot

    My toshiba laptop C50-A172
    How to fix my laptop
    did not have the toshiba logo after reboot... .Black plssss help me screen

    Hello

    Remove the battery and unplug the AC adapter.
    Press and hold the power button / stop along 30 sec.
    Then connect the battery and the AC adapter and press the power button / stop.

    What happens now?

  • Tab2A10-70F - 'Services Google Play has stopped' after update

    After update my Tab2A10-70F, an error 'unfortunately Google game has stopped Services' message block other applications. How can I eliminate this? Google store no more work. I need help please.

    Comment to Moderator: New thread is created. Edited topic. A: Re: How do I send a private message?

    Thank you. In fact, I was able to fix it by disabling the Google Services to play then uninstall all updates. After reboot, many applications, including the Google Services to play began requesting updates and after updates, everything is OK except an inscription that appears after startup: "a movement of application is finished.

  • Windows 7 does not stop after updates

    My computer will not stop after you install updates. What is the best way to solve the problem?

    Thank you
    Cam1956

    Hi cam1956,

    The updates take time depending on the size of the file. If the update has hung so I suggest you hard reboot the computer and see if you can boot to the desktop. If you can boot to the desktop and then the updates are not installed will appear and which will be installed during the next update.

    Run the troubleshooter in Windows 7 for Windows Update turn when starting the computer on the desk, and perhaps that should take care of the updates. Install updates by selecting two to both as the updates and see update is actually causing the problem.

    Once you have identified the update that causes the problem, you can access the link below and install the updates manually.

    http://support.Microsoft.com/default.aspx/GP/downloadover/en-AU#TAB0

    If you know the updates that must be installed, you can manually enter the KB update in the search bar the link to download the update manually.

    If the computer does not start on the desktop, then I suggest you to start safe mode and see if you can boot to the desktop. If you are in the office, do a system restore which will take the computer to a time where it was working fine and then start to install the updates manually as suggested above.

    Go to the link below for the procedure to start in Safe Mode and system restore.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Let us know if the problem is not resolved or for any other help.

    Varun j: MICROSOFT SUPPORT
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • The UI system stops after 6.0 update

    After that the 6.0 update (with companion Xperia software) the phone is no longer usable.

    After reboot, all I see is "Unfortunately, the UI system has stopped.". Click OK to find again and again the same message.

    Start in safe mode - even!

    This is ridiculous. I can't make even a factory zero without user interface. The only thing that works is the power button.

    If anyone has any suggestions, please let me know. Thank you!

    I just received today, the information that this will be fixed in a future software update which is scheduled to begin deployment in the middle of April 2016. Please note that the software updates are published at different times according to the operator and your country.

  • My Torch 9800 blackBerry smartphones stuck after reboot and removing muncher

    Hi, someone at - it help me on this problem...

    I bought this lamp almost 2 years (first model)... Since 2010, there is no critical problem has occurred so far, but...

    Today my torch can be the use of these problems. Let me explain the details.

    1. I installed white (screen capture program), after installed I launched this apps and my bb automatically rebooted.

    2. then, after restaterd, the bb can be used as usuall and I don't start screen muncher apps after (case 1).

    3. last night, my bb works correctly and it is no problem at all...

    4. this morning, I think that to remove the apps (muncher) because I no longer use. Then, I deleted this application using normal procedures. And, as we have known it, bb must be restart after unistalling all the apps, then I restart.

    5. to restart (loading bar) is stopped to load 3/4 bars... So, I take the battery out to restart once again...

    6. after rebooting, my bb seems ok until it to load menus and other. But it's only for 15 seconds. After 15 seconds, an icon (loading star * like the sunflower) appeared.

    7. my bb stuck and I can ' t use any button / touch screen function. My screen will not also turn off their light.

    8. I tried to restart almost 6 times (remove battery), but it still the same...

    * I use the menu for 15 sec then it becomes insensitive...

    Please help me...

    Sorry for not including 'return first '. I think that he or she has not read the article.

  • WebLogic Admin server fails to start after reboot

    Hi gurus,

    WebLogic Admin server starts after a reboot of the server. Note that weblogic has graciously stopped before restarting.

    Also note that the following files have been accidentally deleted after reboot (but I don't think that that should cause a problem..):
    / opt/Shared/Apps/Hyperion/Oracle/middleware/user_projects/Domains/EPMSystem/Servers/adminserver/Data/Store/default/_WLS_ADMINSERVER000000. DAT
    / opt/Shared/Apps/Hyperion/Oracle/middleware/user_projects/Domains/EPMSystem/Servers/adminserver/Data/Store/Diagnostics/WLS_DIAGNOSTICS000000. DAT


    Looking at the AdminServer.log:


    * # < 11 October 2012 11:27:53 CEST > < critical > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969273846 > < BEA-000386 > < server subsystem failed. Reason: java.lang.AssertionError: weblogic.management.provider.EditFailedException: *.
    java.lang.AssertionError: weblogic.management.provider.EditFailedException:
    to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:79)
    to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
    at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
    at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
    to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:83)
    at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
    at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
    at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
    at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused by: weblogic.management.provider.EditFailedException:
    at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1754)
    at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
    to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:76)
    to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
    at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
    at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
    to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:83)
    at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
    at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
    at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
    at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
    Caused by: org.xml.sax.SAXParseException: premature end of file.
    at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195)
    at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:174)
    at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:388)
    at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1414)
    to com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$ PrologDriver.next (XMLDocumentScannerImpl.java:1059)
    at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
    at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140)
    at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
    at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:808)
    at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
    at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
    at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:235)
    at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:284)
    at weblogic.xml.jaxp.RegistryDocumentBuilder.parse(RegistryDocumentBuilder.java:163)
    at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
    at weblogic.management.provider.internal.ConfigReader.convert(ConfigReader.java:106)
    to weblogic.management.provider.internal.ConfigReader. < init > (ConfigReader.java:70)
    to weblogic.management.provider.internal.ConfigReader. < init > (ConfigReader.java:64)
    at weblogic.management.provider.internal.EditAccessImpl.loadBeanTree(EditAccessImpl.java:1917)
    at weblogic.management.provider.internal.EditAccessImpl.loadBeanTreeFromPending(EditAccessImpl.java:1807)
    at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1740)
    at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
    to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON. < init > (DomainRuntimeServiceMBeanImpl.java:76)
    to weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$ SINGLETON.getInstance (DomainRuntimeServiceMBeanImpl.java:68)
    at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
    at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
    to weblogic.management.deploy.internal.DeploymentManagerImpl. < init > (DeploymentManagerImpl.java:81)
    at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
    at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:232)
    at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:154)
    at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:26)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)


    # < 11 October 2012 11:27:54 AM EDT > < opinion > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274051 > < BEA-000365 > < changed failed State Server >
    # < 11 October 2012 11:27:54 AM EDT > < error > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274053 > < BEA-000383 > < is not an essential service. The server will shut down >
    # < 11 October 2012 11:27:54 AM EDT > < opinion > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274069 > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >
    # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274138 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.domainruntime. >
    # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274140 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.edit. >
    # < 11 October 2012 11:27:54 AM EDT > < Info > < JMX > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274141 > < BEA-149513 > < JMX Connector Server stopped at service: jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.runtime. >
    # < 11 October 2012 11:27:54 AM EDT > < Info > < WebService > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274146 > < BEA-220028 > < Web Service reliable agents are suspended. >
    # < 11 October 2012 11:27:54 AM EDT > < Info > < WebService > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274153 > < BEA-220029 > < Web Service reliable agents are shut down. >
    # < 11 October 2012 11:27:54 AM EDT > < Info > < MessagingBridge > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274318 > < BEA-200001 > < messaging bridge has shut down successfully. >
    # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274426 > < BEA-040308 > < service JMS suspends >.
    # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274506 > < BEA-040107 > < 8 cancelled by default connection factories. >
    # < 11 October 2012 11:27:54 AM EDT > < Info > < JMS > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274510 > < BEA-040015 > < stop JMS is done >.
    # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274530 > < BEA-001144 > < Force suspending the JDBC service. >
    # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274536 > < BEA-001146 > < Force suspend the JDBC service finished >.
    # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274538 > < BEA-001147 > < JDBC service stop. >
    # < 11 October 2012 11:27:54 AM EDT > < Info > < JDBC > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274552 > < BEA-001149 > < stopping the completed JDBC service >.
    # < 11 October 2012 11:27:54 AM EDT > < Info > < WebLogicServer > < tnsq08041.energy.ge.com > < AdminServer > < main Thread > < < WLS Kernel > > <><>< 1349969274694 > < BEA-000236 > < stop run > discussions.
    .....


    Kindly guide me with this. Thank you!

    Published by: Kent Pawar. October 11, 2012 08:51

    It is:

    Caused by: weblogic.management.provider.EditFailedException:

    A likely reason may be a few changes in the config.xml file. If you have a previous backup of the config.xml file, then try to replace the config.xml file, and then restart the server.
    Another reason for this exception maybe it were completely a few changes to the configuration through the administration Console that were not activated and the server administrator has been restarted. According to this scenario, weblogic will create a dir /pendig and have a config.xml file is created with the changes unchecked.

    a solution of workaround that you can try to restore the management server:

    Under domain dir.
    \pending directory - take backup and delete the directory.

    Under Dir Admin Server:
    data\store - take backup and delete the directory.

    Thank you
    Sandeep

  • Ping IP of ESXi host fails after reboot? Newbie

    VMWare ESXi 4.0.0 ReleaseBuild 171294 - HP ProLiant DL360 G4

    The server turned craps so we got a used that even make and model and shared disks.  Now we cannot connect with the customer and we cannot ping, ping times out.  When we ping from the console we get inconsistent results, can ping ok, the first IP addy and then fails on the second ping, or it connects to the second IP addy, but fails to ping first that it resolve the hostname constantly.  We stopped and started the management network and Management Agents a couple of times but no joy.

    I have the Articles KB 1008446 ping to the ESXi host IP fails after reboot, 1003490 restart the Management Agents on an ESX or ESXi Server and 1003677 Tech Support Mode of emergency support.

    What must we do to recover the server to an operational state? If there is other information needed to help us please let me know.

    And, what distro and version is ESXi 4.0.0 inspires?  I read that it is Redhat, but I couldn't find the version.

    I have worked with Soloris, Linux and Aix over the years, so I am comfortable working from the cmd line if need be.

    Thank you

    ESXi is not Linux. The VMkernel is VMware. The small console that runs the VMkernel is busybox. ESX has a VM management based on RedHat 5, but here again the VMkernel is all VMware.

    I would check that the embedded NICs are working properly. Start with a linux rescue disk and test.

    If all extracted would reset the system configuration from the yellow Console screen. Your configuration will be lost, but your machines virtual etc. will be OK. You will need to add to the inventory.

  • Flash animations stop after a random time

    The problem I encounter is that the flash movie files (each site) play for a moment or two, then will stop with little "loading" symbol turning constantly in the center of the screen. Flash movies used to work without problem, but in recent months, she went from does not to doesn't work do not at all. to a perhaps related problem sometimes downloads stop after a certain period of time and also seem to "hang on" to a random location. If I pause and then charging that restart the program or anything that will usually complete the download. It doesn't happen often but it happens. The flash animation, however, thing every time - no matter what browser I've tried. (Firefox, IE, IE with no Add-ons and Chrome in any case.)

    I tried the solutions I've found all over the internet, including Adobe and Microsoft forums, nothing helps. I unloaded flash with the Adobe uninstaller and reloaded flash. I tried different versions of flash - with and without a firewall on. I made sure I use the 32-bit version of Internet Explorer and even tried to run in "Administrator" mode. I've updated all the drivers that I can upgrade. I used a check of the register as a last resort. I even used the Dell partition to return my computer to the condition it was when I bought it and that has not changed anything either.

    Everything I've tried has made zero difference. In the hope that someone will have another idea for me to try, I put all the stats of my computer that I can think of below.

    Qwest internet operating at 20mbps

    Flash 10.1.102.64

    Shockwave 11.5.9.615

    Microsoft Security Essentials

    Tried both IE 9, IE with no Add-ons, and now have IE 8 when I restored it the image of the partition

    Name of the OS Microsoft Windows 7 Home Premium

    Version 6.1.7600 Build 7600

    System manufacturer Dell Inc.

    System model Inspiron 560

    Type of system PC x 64

    Processor Intel (r) Core (TM) 2 Duo CPU E7500 2.93 GHz, 2936 Mhz, 2 Lossnay, 2 logical processors

    Graphics - Intel G45/G43 Express Chipset

    -Realtek High Definition Audio sound

    Version of the BIOS/Date A00 Dell Inc., 06/10/2009

    SMBIOS Version 2.6

    Layer of HAL Version = "6.1.7600.16385".

    Physical memory (RAM) installed GB 8.00

    Total physical memory 7.96 GB

    Available physical memory 6.94 GB

    Total virtual memory 15.9 GB

    Available virtual memory 14.4 GB

    File of the page space 7.96 GB

    Hi, thanks for the info of Kill bits. I think an uninstallation/installation may be in order. However, I not to do this use the router, unplug it and use the modem directly.

    Use the administrator account.

    Download and SAVE to your desktop, the uninstall program:

    http://kb2.Adobe.com/CPS/141/tn_14157.html

    Download and SAVE to your desktop, the installation program to use IE installer EXE

    http://www.Adobe.com/products/flashplayer/fp_distribution3.html

    Close all the browser windows, you do not want to look on your desktop.

    Disable Messenger services, like yahoo, msn, etc. in the tray (area near the clock)

    Launch the uninstaller and when you are done, Reboot (restart) your computer.

    Run the installer for IE, run Setup for FF and when you're finished, restart.

    Then go to this site and test:

    http://www.Adobe.com/software/Flash/about/

    You can print these instructions to make it easier to follow. If you have any questions, let me know.

    I hope that since so many changes have been made, that a clean uninstallation/installation can run.

    And if he does so before using the router, that would be a problem. The Qwest ISP cannot be ruled out, but if you still have the problem after that, so needs.

    Thank you

    eidnolb

  • Not ready external hard drives after reboot

    You have a weird question, or perhaps I should say one on that I can't find something. I've dealt with it for years and finally had enough of it. Rarely, I restart my Mac, do not need, is not something that happens often. But on the question.

    I have an iMac of 2015, internal SSD, or merge, I suppose, and a couple of external hard drives attached. Both are 4TB readers, by USB (for backups) and FireWire (for data, applications, iTunes library, photos, etc.). Both work perfectly during normal use.

    The question is when I reboot. My hunch is that these external drives are not fill their mental health checks / faster the drive internal system files, and when the OS is logged in, all the stuff on my external drives (in this case, my iTunes library) is not found. Of course, everything I do is point iTunes to the external drive and everything is fine (well, that and tell him where to find my wallpaper because it doesn't by default mountain landscape photo!).

    So I'm wondering - is there a way to delay the start of the BONE or the final control until external drives are online? Not a huge problem, but why not. I'm tired of fixing stuff when I reboot. Or else, is something to not configured right and the cause? Hmm.

    What do you say?

    Try to connect the external disk after reboot completed if he could climb.

Maybe you are looking for

  • Can I get a license for my track finished for use of Film/TV?

    Hi, I would like someone from Apple please answer this question for me, I think I asked before when it bought the software but cannot find the transcript. If I create a song/track in Logic Pro X mainly using sound libraries provided as part of the pr

  • I forgot my password, can not get Firefox to send me a link to reset it.

    I forgot my password. I asked for a link reset and we told him that was sent to the email Firefox has on file for me, but nothing happened in my Inbox or in my spam filter. I had to come up with another account to ask this question, but I really wish

  • Time machine will not be finished

    Time Machine won't complete a backup of 900 GB on my mid-2012 Mac Book Pro with 8 GB of RAM and 1 TB of disk. the OS is 10.11.2. The external drive is USB - 3 5 to Seagate and there is nothing else on the disk. 24-hour backup. For the last three hour

  • updated verizon mifi now unable to connect a new

    Have an all in one printer 4622.  It was connected to a VZW mifi and worked without problem.  I had to update because he died and now I can't figure out how to set up a new.  Help, please.

  • learning of the problem

    Why my computer denies me access to the removal tool with my printer one that happened to my on my desktop dell dock