T440p using more low-power AC adapter

Similar Questions

• Is it wrong to have the mode low power still?

  My iPhone 6 has a battery OK, but I always tend to activate the low power Mode even if my phone is 100% thinking that it will last much longer. Is this damage or... on my battery life in the bad sense? Should I just activate the LOM when my iPhone is 20%? Thank you

  Of course, it is not bad. Why would Apple design and make a feature available on their devices if it would hurt?  They would not, so use mode low power when you want it.

• Guys, it is advisable to use low-power mode even if it is not yet on 20%? What will happen then?

  Guys, it is advisable to use low-power mode even if it is not yet on 20%? What will happen then?

  It uses less energy than if you don't.

• Low-power audio turn off mode

  Recorded a few videos in mode low consumption. There is no audio signal in one of them. Low-power audio turn off mode? I'm a new user of iPhone still learning on the dev

  Hello taneikab,

  Thank you for using communities of Apple Support. It is my understanding that videos created on your iPhone in low power Mode are missing audio. I know his is a very important part of videos. I'm here to help get this resolved with you.

  Low power mode disable audio, so you should be able to hear sound on records. I recommend that you test your microphone using the instructions and images in the link below.
  Get help with the microphone on your iPhone, iPad and iPod touch

  If the microphones work, but the problem persists, restart your iPhone. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  Here is some more information on what to expect in low power Mode.
  On iPhone Mode low power on your iPhone

  Have a fantastic day!

• Satellite T130 - turns off because the low power

  My 130 just turns off without notice because of the low power, but it shows remaining 40-50% power bfore, it turns off. What is wrong with him?

  Also there is no warning of low power, it just turns off. Any ideas?

  Hello

  That s really strange and I've never heard of this problem...

  You use a Toshiba original AC/DC adapter?
  Have you checked the Web from Toshiba website for updates to the BIOS?
  Have you tested the same with OS preinstalled Toshiba?

• What are users with Cisco 802.11n 802.11ac WLAN APs running on Low Power?

  Experts Sars WLAN,

  I'm new on a big installation WLAN here and noticed that not only the AIR-CAP2702I-E-K9 communicate on the Management Station first central and many changes of low-power 2.4 GHz antenna power level.

  People here tell me that it is not harmful, but I am slightly dubious and would like your opinion here.

  WLAN access points are activated with 2.4 and 5 GHz-antennas and shoot only 15.4 Watt following switch.

  Interface Admin Oper Power (Watts) class of device
  Of the PS to the device
  --------- ------ ---------- ---------- ---------- ------------------- -----

  Ba3/4 auto on 17.3 15.4 4 AIR-CAP2702I-E-K9

  First is revealing:

  "APis running on Low Power." Please disable Radio one and reset the access point to get full power on the other radio. »

  The access point is configured for 802.11n on both bands and 802.11ac on 5 GHz.

  I can also see many Power Level change on the 2.4 Ghz antenna.

  Here people are complaining about downtime on laptops for SAP applications.

  Also a voice over WLAN installation does not work very well.

  But I don't know if this has something to do with low power.

  What are the consequences for WLAN users in this scenario?

  Changes in the level of power can cause interruptions to users of WIFI?

  Is 'Low-Power' - Situation responsible for a large amount of sending changes to feeding on 2.4 GHz?

  Who knows more and has experience with low-power facilities?

  Thank you for any comments on this

  Wini

  Just to add

  What are the consequences for WLAN users in this scenario?

  * Anything, just change really the number of antennas is used

  Changes in the level of power can cause interruptions to users of WIFI?

  * Change in power level, do not make changes to string

  Is 'Low-Power' - Situation responsible for a large amount of sending changes to feeding on 2.4 GHz?

  * No.

  Who knows more and has experience with low-power facilities?

  You should focus on your environment and what you see. With low power due to the PoE does not affect the user experience.  If your access point changes the power too high or too low, you can introduce some poor duplication of coverage or channel.  If you are also in a building/space tenant shared, other installs nearby Wireless will affect your RF and yours will have an impact on their. Nothing we can do.  You must set customer issues before assuming what is wrong, that nothing could be wrong.  The updated client drivers is also a good thing to do to eliminate this problem.

  -Scott

  Please evaluate the useful messages *.

• USB random sectioning and low power after Windows Update

  I had a problem on my Windows 7 to USB disconnected randomly and my cell phone could not get enough power to recharge, this week, I formatted my way of thinking cell phones that could be related software.

  At first it worked fine, USB not disconnect not even my phone loaded without problems.

  Then, I made the update of Windows install SP1, after that everything is gone back as it was, constant disconnections and low power on the USB key.

  I already change the selective suspension of USB registered false on each USB input in the Manager of peripheral and disabled "Windows can turn off this device to save power".

  When it detects Ok on the phone, it shows that the use of 500mA, then he loses the connection and reconnect as unknown device and use of unknown power.

  Another thing is that the often external HARD drive it freezes, when I use the performance monitor shows the current length of queue disk frozen with a value greater than 1,000.

  Anyone know which alter KBs feature USB? Or how to get back the old functions?

  My laptop is 2010 updated with the latest drivers from HP.

  Hi, I tried something that apparently solved the problem.

  Instead of removing just the USB drivers, I removed everything about USB, my edge Broadcom Bluetooth, Wi - Fi on board... because they use this interface.

  After Windows again every single sensor, including the drivers of USB hub, I had no problem of disconnection or power.

  In any case as soon as I can I'll try upgrading to Windows 8.

  If I have gives me more problems I'll answer here.

  Thanks for the support.

• Satellite Pro L300 - use of the power cable between the countries

  I'm buying a Toshiba laptop Satellite Pro L300 T4200 everything here in New Zealand, where I will be staying for the next six months. However, I'm heading back to Alaska (United States) in April.

  Someone could answer my concerns about the use of power cables and to buy once back in the States. for the most part is it safe to use a USA power cable in this laptop bought NZ without breaking something to bits?

  THX, kim3300

  When you return to the States, I think that you must travel kit adapter power supply only.
  I recommend you consult your dealer and gathering information that it will be the best for you.

• HP 8200 elite CMT: can I use an external power supply for AMD Radeon HD graphics card 7770?

  I have HP 8200 elite CMT CPU in which 320 watts PSU is installed. I want to use AMD Radeon HD 7770 requiring more power (minimum 400 watts power supply) for maximum performance. But the fact is, the higher Watt PSU is not available for my cpu because its cables do not match that. So I ask if I can use the external power supply to power my GPU instead of the CPU power. Will be this harm to my PC?

  Kindly help me to solve this problem.

  Thank you

  Thank you for the information, @haseebkhan7310.

  I'm not a fan of using a separate power supply to power a video card.  It can cause problems.  However, here is a video that will show you how it can be done:

• Impossible to activate the mode of low power on iPad 4

  I can't activate the low power on my iPad mode 4. There is no option to do so, when I select the battery menu im settings. Any ideas why this happens?

  Low Power Mode is only available for the iPhone or iPod may as well. iPad did not have this option, trust me. I use iPad and I don't have this option as well!

• Can power supply Question - I use the 230W power supply with a W540?

  I have a W540, which currently uses a power 170W (8.5 a 20V)

  I got also a docking station for a P50 that has a power of 230W showing 20V 11. 5a.

  The connectors are similar, but I'm hesitant to try the 230W power supply in the W540.

  It is allowed to use the 230W power supply with the W540?

  230 watts is maximum power feeding, it only provides the energy required by the computer.

  I sold my W540, so I can't test it for you. But I do use the ThinkPad X 1 carbon with 230 watts without no problem power adapter.

• Can I use a USB B Female adapter USB A Female in a HP Pocket Media Bay?

  Can I use a USB B Female adapter USB A Female to transform the unused HP Pocket Media Bay of a s3230uk in an area of loading of MP3?

  Surely a small load player would take less power, then a HARD drive?

  I can confirm it works and is a good way to make use of the space.

• Calendar Creator more than Power UP software compatibility with W7 Pro operating system

  I am running Calendar Creator more than power upward on a laptop XP Pro (SP3) and Vista desktop. I upgraded a second office linking W7 Home Pro for compatibility features but can not get the W7Pro to run the calendar program. I went through the screens of compatibility W7Pro without success. I moved the program from one computer to another for years with no real problems so far. I LOVE my calendar program and need advice how to solve the problem of compatibility W7Pro.

  By the program area, some of the system requirements are as follows:

  80386 or higher IBM or compatible PC: 3MB RAM: Windows 3.0 or higher:

  Its a very old origonally program for win3.0 and could thus be a program 16 bits, and if you have win7 64 bit his will never run unless you use an emulator, such as DosBox.

  Basically, you can solve a problem of compatibility, otherwise that by getting an update of the program, if such exists, or using an emulator or virtual winxp, but one such solution will be more difficult than its worth (if even that works)

  Time to move and use the calendar provided in windows live essentials, or another more upto date schedule program

• How do I cure - low power on 2112 port PoE inline?

  I have a WLC 2112 with LAP is attached directly to the port PoE 8.

  Controller monitor reports:

  AP Interface: 0(802.11b) State Down operation: basic Radio MAC: 00: 3A: 99:67:53:50 Cause =Low power online

  The tab Advanced Options on the configuration of the AP doesn't show any PoE power state.

  How can I use this access point on the controller port?

  ----------------------------------------------------------------------

  WLC is AIR-WLC2112-K9

  Version of the product... 6.0.199.4
  RTOS Version... 6.0.199.4
  Bootloader Version... 4.0.191.0
  Version of the Image of emergency... 6.0.199.4

  Summary of port
  STP Admin physical physical link link
  Type of PR Stat Mode Mode status trap POE
  -- ------- ---- ------- ---------- ---------- ------ ------- ---------
  1 normal Forw Enable Auto 100 complete to enable s/o
  DISA normal 2 activate Auto down Enable n/a
  3 normal Forw Enable Auto 100 complete to enable s/o
  Normal DISA 4 enable Auto down Enable n/a
  Normal DISA 5 activate Auto down Enable n/a
  DISA normal 6 select Auto down Enable n/a
  7 normal Disa Enable Auto down Activate activate (power off)
  8 normal Forw Enable Auto 100 Full Up turn on (power on)

  Model AP... AIR-LAP1131AG-E-K9

  Picture from AP... C1130-K9W8-M

  Version of IOS... 12.4 (21 a) JHB1

  Hello

  Set power injector state to 'over-ride' , if we are not able to see this on the AP Advanced.. kindly paste the screenshot here..
  
  Regards
  
  Surendra

• Warning of low power for AIR-LAP1242AG-C-K9

  Hey Buddie,

  We bought a few AIR-LAP1242AG-C-K9, but not perchasing no matter what wireless controller. When I connect the TOWER to the port of Cat2950 or Cat2960 TRP, all the TOUR cannot start normally. It shows low power, please consult the attached two images. But if I use the external power cable, the TOUR can work well. So, I would like to know two things.

  1. can I use stand-alone TOWER without using the controller?

  2. If the above is Yes, how can I configure the PPoE on cat2950 to TURN Support correctly?

  Thank you very much.

  Hi Jian,

  Q. can you a RIDE operate independently of a wireless LAN (WLC) controller?

  A. No, towers may operate independently of the function WLCs. tours in conjunction with a WLC only. The reason is that the WLC provides all the configuration settings and the firmware that the TOUR needs in the process registration.

  So you will need to return the AP and download the version of IOS, buy a WLC or convert the TOWER to IOS :(

  Q. how to distinguish between a regular (standalone) AP and a TOWER?

  A. the best way to distinguish between a regular access point and a TOWER is to look at the reference number of the AP.

  LAP (AP light Protocol [LWAPP])? The numbers always begin with AIR-LAPXXXX.

  Autonomous AP (Cisco IOS? Software)? The numbers always begin with AIR-APXXXX.

  This doc. good Q and A

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_qanda_item09186a00806a4da3.shtml

  You can convert an access point of the mode light return to autonomous mode by loading a Cisco IOS version that supports stand-alone mode (Cisco IOS release 12.3 (7) JA or earlier version). If the access point is associated with a controller, you can use the controller to load the version of Cisco IOS. If the access point is not associated with a controller, you can load the version of Cisco IOS using TFTP.

  By using a TFTP server to revert to a previous version

  Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:

  --------------------------------------------------------------------------------

  Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.

  Step 3 Rename the access point image file in the folder of the TFTP server c1200-k9w7 - tar.default for a series of 1200 point, c1130-k9w7 - tar.default of access for a series of 1130 access point and c1240-k9w7 - tar.default for a series of 1240 access point.

  Step 4 connect the PC to the access point using an Ethernet category 5 cable (CAT5).

  Step 5 disconnect the power to the access point.

  Step 6 push the MODE button and hold the button while you reconnect power to the access point.

  Step 7 hold the MODE button until the status of the LED turns red (approximately 20 to 30 seconds), then release.

  Step 8 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.

  Step 9 after the access point reboots, reconfigure using the GUI or the CLI.

  This doc.

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272

  I hope this helps!

  Rob