T440s: battery if the deactivation cannot start

Hi all

I just got my T440s a couple of weeks. Stupidly, I ordered with only 4 GB of RAM, thinking I couple update myself if necessary (and it would be much cheaper this way).

Well it seems that 4 GB is certainly not sufficient for my needs, so I ordered another stick of 4 GB. I installed, plugged the machine and he lit. And was greeted with the tone of a memory error. Probably the module is not seated properly, but I suppose it could be defective.

In any case, you will notice that I said that I plugged it before lighting. This means that the internal battery has been reactivated. I can confirm that because she's going to start (and give me the error) without being connected and without the external battery connected. So my problem is, how do I disable the battery internal again to remove or reinstall the problem DIMM, given that I can't to the transactional UEFI/BIOS to disable.

Help, please.

I know, but just remove the added key as-is and see if the machine starts. If this is the case, enter the BIOS, turn off the battery voltage internal and try to put in place the new stick. If it starts successfully after that, then you can reactivate the battery.

Tags: ThinkPad Notebooks

Similar Questions

  • Satellite L300 - 16L: bootmgr image is corrupt. the system cannot start

    Bootmgr image is corrupt. the system cannot start

    Why is this?

    Have we lost all files etc on the laptop?

    Its a Toshiba L300 - 16L 'versatile Base '.

    Any help would be great - thanks

    Wayne

    Well, the system on the HARD drive seems to be corrupted.
    Who knows why, but it happens sometimes, it s nothing unusual and, therefore, it s always recommended to backup the data always

    The files are not lost, but you are not able to start the unit.

    What you can do?
    Well, you can grab the laptop again.
    By using the HARD drive recovery option (press F8, repair my computer, drive HARD recovery) or by using the recovery disk

    But this will format the HARD drive and you will lose data.
    If you want to get access to the data, I recommend booting of live CD WinPE and BartPE.

    Google for more details...

  • Error 244: The DataFinder cannot start due to an internal error.

    I have LabVIEW 2010 and, during Windows startup, this error message appears:

    "The DataFinder cannot start due to an internal error.

    (244): Please wait until the National Instruments PSP Service is running and try to start the DataFinder or restart your computer. »

    I got this pop error during the past year it's a recurring thing. He began to show a few months after installing the LabVIEW program on my computer, so I'm not sure on what caused this message still appears. I find that it causes also a delay in the start of my computer - my other startup applications starting to show only when I close the error window. Help, please! Thank you.

    Hi xcontradictorx,

    Looks like National Instruments PSP server locator cannot be started. Could go you to the control panel > administrator tools > Services and locate the server National Instruments PSP Locator? Double-click it and make sure that the service is started. If this is the case, stop and start again (just by pressing the stop and start buttons). If this is not the case, run it, and then go in the Recovery tab and choose restart the Service as long as the action of first, second and more about chess.

    If after changing the settings for the PSP the issue to continue service I think that for some reason any PSP service will just be started late for some reason any. Could you do a quick real test: disable the DataFinder in msconfig, reboot, then run the C:\Program NIUninstaller Instruments\Shared\DataFinderDesktop\bin DataFinder.exe. This should place the MyDataFinder app in your taskbar (that looks like a yellow gear).

    If this is successful, then we will have to change the order of startup services such as the DataFinder begins just after the service of the PSP.

    Try the following:

    (1) locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
    (2) remove the entry DataFinder
    (3) add a shortcut to DataFinder.exe in C:\Documents and Settings\All Users\Menu Menu\Programs\Startup
    (4) restart

    This should make all the standard Windows startup (as from services, etc.) and then launch the DataFinder.

    One question: do you use the DataFinder at all? Either with DIAdem or database search tool? If this isn't the case, you can try to remove it from the startup items. Simply go to start > run... and type "msconfig". Click the Startup tab, look for DataFinder and deselect. Click on apply. That will probably get rid of the error message.

  • The program cannot start because MSVCR110.dll is missing on your computer.

    HP Pavilion g7-2235 dx notebook PC.

    USB ports not working do not.

    Not installed Adobe Reader.

    The program cannot start because MSVCR110.dll is missing on your computer.

    Try reinstalling to resolve this problem.

    Reinstallation does not work.

    Any ideas anyone?

    Thank you.

    There are three files to download.

    vcredist_arm.exe

    Vcredist_x86.exe

    VCRedist_x64.exe

    Should I try any or all of them?

    Thanks a lot again.

  • I get an error message: "the progran cannot start because DEVOBJ.dll is missing on your computer.

    When I start my computer my screen is all black and the message says 'the progran cannot start because DEVOBJ.dll is missing on your computer. Try reinstalling the program to fix this problem' I don't see even the Start button if someone knows what's going on please help.

    Take a look at the following:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/devobjdll-is-missing-cannot-login-reinstall/5080677a-DB05-4A34-B36F-d0c3329c2dd0

    I would also like to launch a full scan with your antivirus

  • The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix this problem. Where can I get this program?

    Pop Up-

    The program cannot start because MSVCR80.dll is missing on your computer.

    Your response-
    Try reinstalling the program to fix this problem.
    Question-
    Where can I get this program to download?

    Hello

    If the problem is with iTunes, uninstall everything according to the instructions from Apple:

    «Remove and reinstall iTunes, QuickTime, and other software components for XP»

    http://support.Apple.com/kb/ht1925

    It is also the same list of what to remove what is in the link above from Apple:

    http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

    Or try this program to remove it:

    http://www.revouninstaller.com/revo_uninstaller_free_download.html

    "Resolution of problems with iTunes for Windows Update"

    https://discussions.Apple.com/docs/doc-6562

    If the advice already given does not, please contact Apple for assistance.

    "Not to install iTunes or QuickTime for Windows"

    http://support.Apple.com/kb/HT1926

    "iTunes support-how to use iTunes.

    http://www.Apple.com/support/iTunes/

    "Contact iTunes Support.

    http://www.Apple.com/support/iTunes/contact/

    Or ask in the community Apple iTunes:

    https://discussions.Apple.com/community/iTunes

    ____________________________________________

    If the problem is not with iTunes, there is other information about this error on the link pcsupport.

    See you soon.

  • test of strength of dirt the program cannot start because OpenAL32.dll is missing

    test of strength of dirt the program cannot start because OpenAL32.dll is missing

    Hello

    Did you change your computer before this problem?

    You can follow the suggestions and check out them.

    Method 1

    Check to see if the problem exists in a clean boot state.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

    a.Click Startand then click run.

    b.Type msconfig and then click OK.
    The System Configuration utility dialog box appears.

    c the general tab, click Normal Startup - load all device drivers and services, and then click OK.

    d.When you are prompted, click restart to restart the computer.

    Method 2

    If the problem exists, you can uninstall and reinstall the program.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    Note: Make sure you have the installationd disk before you uninstall the program

    See also:

    How to manually remove programs from the add tool / remove programs

    http://support.Microsoft.com/kb/314481

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

    How to back up and restore the registry in Windows XP

    http://support.Microsoft.com/kb/322756

  • webcam works but the software cannot start the capture device

    Original title: webcam problems

    purchased the software igambin movie2 stop motion, as well as a logitech c500 webcam. The webcam works but the software cannot start device capture. The support of igambin seems to think that it might be the interface or something access to webcam all the time. Any ideas out there. Thank you

    Hi reefwatcher,

    1. Did you the latest changes on the computer?
    2. You are able to use the webcam on other applications?
    3. You receive an error message?

    Method 1

    To check if a program is installed on the computer interferes with the software, I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    Method 2

    If fails it above step, try uninstalling and then reinstalling the program, check to see if it helps.

    http://www.ikitmovie.com/15/stop-motion-animation-tutorial.htm

    http://www.ikitmovie.com/free-trial-stop-motion-software.php

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    Method 3

    If the previous step fails, then you will need to contact the software retailer for assistance.

    http://www.ikitmovie.com/contact-us.php

  • BOOTMGR image is corrupt. The system cannot start.

    Toshiba Satellite L355: MODEL No.: PSLD0U-00800 X

    Start the computer, a black screen with the wording of the "BOOTMGR image is corrupted.  The system cannot start. »

    Use the Applications/drivers, satellite L350 series windows vista Home Premium 32 - Bit SP 1 comes with the laptop in the DVD player and Toshiba Recovery and you will see the loading of the window.  After a certain time.  Screen pop up as Windows boot manager below:

    Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
    1. Insert your windows installation disc and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on "Repair your computer."
    If you do not have the disk, contact your computer manufacturer or the system administrator.
    File:\windows\system32\boot\winload.exe
    status: 0 xC0000001
    Info: the selected entry could not be loaded because the application is missing or damaged.

    He did not show the original image from all the instructions on-screen (System Recovery option).  How the diagnosis without system recovery option to find the laptop computer component failure?  First impression of the BOOTMGR image is corrupt is the failure of hard drive, but I replaced the new hard-drive(SATA 2.5"MOMENTUS") and tried used the disc of discovery.  The result displays same window boot manager as described above.

    What is the suggestion to the exception to send to the repair shop?  Thank you

    Hello

    Your Toshiba did not come with two discs? One allows the Startup Repair - start a boot and press F12 for
    Select DVD as the boot device.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or use a Vista disc
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Unable to boot Windows vista-windows boot configuration data file is missing required information-
    Repair Corrupt Boot Manager
    http://www.troublefixers.com/unable-to-boot-in-Windows-Vista-Windows-boot-configuration-data-file-is-missing-required-information/

    How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair
    starting in Windows Vista problems
    http://support.Microsoft.com/kb/927392

    How to fix "BOOTMGR is missing" in Windows Vista
    http://cyberst0rm.blogspot.com/2007/04/how-to-fix-Bootmgr-is-missing-in.html

    Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
    required information.
    http://support.Microsoft.com/kb/927391

    Vista tip: Fix error "BOOTMGR is missing" - a quick way
    http://Lifehacker.com/251733/Vista-tip--repair-Bootmgr-is-missing-error

    See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
    http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

    If necessary:

    Toshiba support - click on connect and contact the technical support and/or forums
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • [Trying to open the computer management] The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

    The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

    I get following error when I try to open the computer management in windows 7, the error is as follows.

    The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem.

    Where can I find this dll file and help me to download and install.

    I'd install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010.

    Download the files below according to your operating system version. I would setup versions because they may be needed for different programs. Check in programs and features, you show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
     
    Package redistributable Visual C++ 2005 (X 86)
     http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
     
    Visual C++ 2005 (x 64) redistributable package manager
     http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

    Package redistributable Microsoft Visual C++ 2008 (x 86)

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

    Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64)
     http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

    Package redistributable Microsoft Visual C++ 2010 (x 86)
    http://www.Microsoft.com/download/en/details.aspx?ID=5555

    Package redistributable Microsoft Visual C++ 2010 (x 64)
    http://www.Microsoft.com/download/en/details.aspx?ID=14632

    Thank you

    Marilyn

  • the program cannot start because AegisE2.dll appears during startup

    Whenever it starts windows 7 I get this message. the program cannot start because AegisE2.dll is missing. Someone knows how to solve this problem. Ive done a (sfc/scannow) and cleaned the registry, but nothing works.

    [Original title: Mike Jenkins]

    This seems to be the DLL belongs to your wireless network card.

    I suggest visit your PC manufacturer's Web site and install the latest version of the software or driver related to your Wi - Fi connection or the network and uninstall the current from your PC and restart your PC and install the one you download.

  • "Error system, the program cannot start because missing d3dx9_43.dll.

    Original title: error

    So I built a new computer and I was about to play my favorite game, legends, League then suddenly a message said, "an unknown DirectX error occurred and league of legends cannot start. Please make sure that your video card is to use the latest video drivers from the manufacturer. Know the name of my graphics card, ASUS GEFORCE GTX970, I went to their website and downloaded their latest driver. but who did not work, just made another pop up message that says: "system error, the program cannot start because missing d3dx9_43.dll.

    I tried several methods, but many of them do not work and I really need help to solve this problem. Now when I try both messages are in pop up. be really annoyed, I tried another game, Counter Strike Global Offensive, it's the same thing, he has done it before, but it doesn't have a pop-up, it just does not open.

    "I have tried several methods, but many of them do not work.

    This does not tell us what you tried, so I'll start at the top.

    d3d9_43.dll is one of the 'new' DX files, and you have a fresh install of Win7, you need to update DirectX

    (even if the "latest" DX files come from 2010).

    Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

    DX files can be damaged. In this case you can remove the suspicious file in System32 and sysWOW64 and run the Web Installer to replace this file or reinstall all files DX using the full DirectX Redist (June 2010), which will overwrite all DX files (Web Installer does not overwrite existing files).

    The second option is often necessary because you don't always get a specific file mentioned in the error.

    Download details - Microsoft Download Center - DirectX Redist (June 2010)

    .

  • HP Photosamart Premium: the program cannot start because hpqcutil.dll is missing

    I've had my printer for quite awhile.  Recently I had to download as because wireless USB port would not work.  I've used it since, but yesterday, I changed two cartridges.  Once I tried scanning photo and save it I got the message: the program cannot start because hpqcutil.dll is missing from the computer.  Try reinstalling the program to fix the problem.

    I reinstalled again today and still get the same message.  How do I now please?

    HP Photosmart Premium 309

    Lyn

    PS my system is Windows 7.  32-bit.

    You don't need the installation disc at all. Discover the second option in my last post, where you can download the airline pilot, I posted for you as well. Once the download is complete, installation begins, for now, cancel the installation and start following the steps in the second part of my last post, and that will help you perform the uninstall of level 3.

    Good luck

  • The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix the problem.

    This came after I installed an iTunes update and wouldn't let me open iTunes.

    This comes first when I clicked to open iTunes:

    The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix the problem.
    Then this happens after I crossed the first window that displays the above message.
    iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
    What does that mean? Why is he doing this? How can I solve this problem? I almost lost all my music, so can't do nothing about it, but why iTunes no longer works?

    Hello Geordie,

    This is probably due to a bad iTunes update. I recommend you to please refer to the http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/error-message-missing-msvcr80dll-when-trying-to/c8b05024-c4bc-4d14-87ef-4dcbb51c8c97?page=1&tm=1390761398091 thread and an update on the status of the issue.

  • The program cannot start because LibMySQL.dll is missing on your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk.

    Original title: Mysql Libmysql Dll error correction

    The program cannot start because LibMySQL. dll is missing from your computer, try reinstalling the program to fix this problem, it is displayed as error on my desk. LibMySQL. dll is C:\Windows\System32, but I can't run the .exe file, I want to run, I can to do, how to fix this problem automatically, I have Windows7 64-bit machine, computer laptop lenovo T530

    Thank you!

    I solved this problem, I put this file LibMySQL. dll to the folder where the .exe file is, I want to run. Exe file, I want to run, cannot call LibMySQL. DLL in C:\Windows\System32,that is the question, I found on a forum suggestion what I have to do

Maybe you are looking for

  • How to cancel an order to "do this automatically" I have shouln t hit.

    I double click on an attachment photo (JPG file). I was given the choice of 'open with' or 'save to disk '. I chose 'save to disk' to this particular photo, but then I made the mistake of checking the box "Do this automatically for files like this in

  • Laptop won't turn on, flashing lights

    Hello My laptop is a HP Pavilion dv6z-1100 sound running a 64 bit version of windows 7 Home premium, and recently, he stopped at boot the system successfully. While being used, all of a sudden the screen went dead (without warning) and the computer t

  • Separate Code that is compiled from source off, why?

    I ran on a question and would like to know if there is a reason, it happens or is this a bug. Basically, we separate compiled all of our source code to make the work with the most effective source control. I ran into a problem where some files have t

  • Get TCP Service Port number name

    The TCP listen and the TCP create listener screws have an entry named 'Service name' base, once a listener is created in the LabVIEW application is it possible what service named is running on which port in an external application and query? The exte

  • 'Always open with' option grayed out

    Original title: cannot open applications I can not open any application without the list choose the program and "always open program" appears highlighted that does not work.  I have Windows XP home Version 3.  Some programs are not listed, so I can't