T450 10 Windows Activation has failed

Similar Questions

• Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

  RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

  Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

  I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

  http://eng.ralinktech.com.tw/support.php?s=1

  My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

  I tried to install all kinds of different ways but were not able to make it work.

  Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

  Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7
  Windows 7 discussion groups

  They may be able to help in obtaining the wifi USB adapter to work.

  8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

• How to remove a windows update has failed? C-Media Electronics Incorporation-Sound-CMI8738/C3DX PCI Audio Device

  I can't install an audio controller because of a windows update has failed. How can I remove this update?

  Hi Rodney Hilzendeger,

  If you want to remove or hide Windows Update failure, then follow the steps below:

  a. go to the Windows Update Web site

  b. Select CUSTOM and scan

  c. right-click on the update that you want to hide

  d. click hide update

  You can also consult the following Knowledge Base article Microsoft for more information on troubleshooting didn't update problem:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Let us know if that helps.

• After Windows Update has failed I can print is no longer.

  original title: no printing

  I have a dell xps8100 windows 7 home premiun after a windows update has failed my printer stopped I tried a system restore, but he failed and he said try again

  my printer does not recognize my computer even for a test

  cgb321

  Try reinstalling the drivers for your printer. I had times when an update has done something that required that I have reinstall the drivers for a product. Don't know why, though. It's not really 'supposed', but he did.

• WINDOWS POWERSHELL HAS FAILED

  I KEEP GETTING THESE MESSAGES POP UP SAYING WINDOWS POWERSHELL HAS FAILED AND WILL BE CLOSE THIS PROGRAM. WHAT IS MISSING AND HOW CAN I SOLVE THIS PROBLEM AND MAKE THESE POP-UPS STOP?

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Activation for windows 7 has failed

  I have a computer that is running windows 7 I've had for about a year and a half.  Yesterday, he started telling me that my copy of windows is not genuine.  The only thing I did recently was to install Ubuntu on a separate partition.  It is around this time that the problem started.

  When I try to enter my product key, I get error 0xC004E003.  Any help would be appreciated.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - GJY49 - VJBQ7-HYRR2
  Windows product key hash: W5/6nm6F2UPXrCkY5xUhXb / + 21 = g
  Windows product ID: 00426-OEM-8992662-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.001
  ID: {6F4129FB-F5E1-425C-A15E-64B794FE26A6} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Ultimate
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130318 - 1533
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Professional Edition 2003-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {6F4129FB-F5E1-425C-A15E-64B794FE26A6}1.9.0027.06.1.7601.2.00010100.1.0.001x 64*-*-*-*-HYRR22S-1-5-21-2742374032-2951623872-1680261808the system manufacturer,System Product NameAmerican Megatrends Inc. 00426-OEM-8992662-00006 1503 20110311000000.000000 + 00038643807018400FE04090409Time(GMT-08:00) Standard Pacific03100100Microsoft Office Professional Edition 200311OfOqZUOY02Hs4sq3MYFs6W4Vfw8 =70145-747-5892254-575741 83B531264AADDD6

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Ultimate edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 7cfd4696-69a9-4af7-af36-ff3d12b6b6c8
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00426-00178-926-600006-02-1033-7601.0000-2112013
  Installation ID: 021192247580617413650276583580083155874870152455822813
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: HYRR2
  License status: Notification
  Reason for the notification: 0xC004F057.
  Remaining Windows rearm count: 3
  Trust time: 30/07/2013-10:28:21

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 6:29:2013 13:28
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: NgAAAAEABAABAAEAAQABAAAAAwABAAEAln3Yzxi1eBmsi3zpGl2QGXiaMLqUiO6/wG0qPi5z

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  ALASKA MCFG A M I
  SSDT AMICPU PROC

  You use an OEM SLP license on a generic motherboard:

  1680261808system manufacturer,System Product NameAmerican Megatrends

  License OEM SLP come preloaded on systems brand such as DELL, HP, ACER, Lenovo, Gateway and other brands. If you have changed the motherboard of your system, licence was cancelled. You will need to purchase a new license of full version.

• Update to Windows 10 has failed and now PC will not work properly!

  Tried to update to 10 - failed - now being told invalid product key it is and have used it for 3 years!

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  or

  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Alternatively, you can try to fix the following:

  http://support.Microsoft.com/kb/2230957/

• My installation of windows 8 has failed and takes memory.

  Whenever I try to install windows 8, it fails roughly 90%. Now, I gave up on it, but it takes up to 30 GB on my SSD. Is it anway way I delete these files and recover them without breaking my windows 7?

  Hi AlexScott,

  Number of description, it seems that, while installing Windows 8 it takes about 30 GB on the SSD and you want to delete Windows 8 does not have spaces in files on the computer.

  The installed files of Windows 8 will be in the following locations. You can remove files from the following locations installed and free up memory on the computer.

  %LocalAppData%\Microsoft\WebSetup\

    

  \AppData\Local\Microsoft\Websetup C:\Users\

  C:\ ESD\

  Just reply to the State of the question. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards.

• Microsoft tells me that activation has failed.

  Separated from this thread.

  Hi all

  I followed the steps described in this forum to save my em250 e-machines which had suffered damage from the virus. I got the legitimate key to windows 7 using Jelly Bean Keyfinder. The netbook has a valid license key and has been activated because I bought it in 2010. I then used all the steps to perform a boot of windows 7 DVD, reformatted the hard drive, installed windows via an external DVD drive, used the procedure set out by André de Costa to introduce my legitimate key (slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx-xxxx) and... microsoft then told me the activation failed. It is very irritating and unfair. Is someone can you please tell me what I can do.

  Thank you

  The Jelly Bean returned key was probably the key factory of E-machines. You must use the product key on the sticker that should be on the underside of the netbook or the inside of the battery casing or the netbook / access cover.

  If you need help to locate the ignition key of product E-machines to support: http://www.emachines.com/ec/en/US/content/contact

  J W Stuart: http://www.pagestart.com

• Windows Update has failed. Don't want to not brick it. Need help

  I just received my Revo RL80-UR23.  WIN8 booted up fine.  Went to get the usual windows updates.  All 102 of them (~ 1 GB).  Clicked on install.  During the installation of 99%, he failed and spent several hours back to before the updates.   For a while there I thought I was going to be stuck.  He would not return back and what I would do if the boot has been altered.

  Fortunately he finally did come back, but it made me think that better, I have a backup plan if this happens.  This documentation on Acer is thin.  Can anyone answer a few questions?

  • If the if the unit does not start what can I do?

  • With Windows 8, you may want to upgrade to Windows 8.1. The upgrade stream can be found here: http://us.acer.com/ac/en/US/content/update-to-windows81. This is the suggested method and wrote for all of our units, we tested and customers to my knowledge. I recommend this updates a few at a time and not all at once. It is recommended to install only the critical and recommended updates first.

    If you want to try another operating system, you must create your Windows 8 USB recovery media.

    You can access the UEFI/BIOS by pressing the delete key when you do a cold start. You can also access it from inside Windows by following these steps: http://acer.custhelp.com/app/answers/detail/a_id/27103.

• 10 Windows Update has failed, restored for Windows 7 - cannot open existing files

  Oh boy, am I ever stressed.

  My update of Windows 10 failed today (error: failure of page in nonpaged area).  I will have that later - my immediate problem is that when the update failed and stopped, it is automatically reduced to Windows 7 and all of a sudden I can't get all my Word or Excel files.

  More specifically: I can't open my files in Word or Excel, except those saved on the desktop.  Desktop files open fine, but whatever it is saved in a folder or other location does not open.   Other types of file open: photos, Photoshop, PDF, apparently everything opens without a problem.  For Microsoft Office files, I get the following messages:

  For Excel:

  Excel cannot access "File Name.xls". the document may be read-only or encrypted.

  and

  "File Name.xls" are not accessible. The file may be corrupted, located on a server that is not responding or read-only.

  For Word:

  Cannot open the document: user does not have access privileges

  Possible Note:

  1. I registered normally (as an administrator).

  2. when I right click on the file and look at the properties, everything seems normal (read-only is not checked, and the location of the file looks correct.

  3. I tried to pass a doc to a folder on my desktop.  It says that I have to give permission to the administrator.  I am able to click on the button 'continue' admin, the file is moved to the desktop, but still does not open.

  Any advice would be welcome!  I'm not a computer expert, and I desperately need to access my documents.

  So I clicked 'Add', typed the username- desktop\user name in the subject box, and then clicked on "Check names", then press the OK"" button.

  And now, the file opens.

  I'm sure there's a better difficulty out there, I don't know what it is.  Whatever it is, I can access my files now.

  You have made the right choice. It is essential that the specific user or group 'everyone' has full access to the file or folder. The alternative would be to use the console commands. They require a good knowledge of administrative tools.

  Be sure to mark my suggestion as "Response" to this topic.

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray

• Satellite C850-B559: win 8 for Win 7 downgrade KMS server activation has failed

  Hello

  I have toshiba Satellite C850-B559 windows operating system 8
  I try to downgrade to Windows 8 for 64-bit Windows 7 Enterprize.
  It works well but faild KMS server activation!

  can you help me find the problem?

  Hello

  Your purchased Windows 7 from Microsoft?
  The serial key is provided by Microsoft. Is - is this right?

• Updates Windows 7 has failed: error code 646

  Every time my computer trying to install MS security updates most of the updates fail.  I currently have 19 updates which will not be installed.  I get the error code 646.  I have disbling my firewall while trying to install updates, but that did not help.  I'm on a wireless network if this has an impact on it.  Please help me find a solution.  Thank you.  KAH42

  Kah,

  the KB includes an automated fix this that solves the problem. Look here: http://support.microsoft.com/kb/2258121

• Windows Update has failed or corrupted

  Can someone at Microsoft please help... I did have a successful Windows since Oct 2015 update. Each update since then, except a (Skype) did not install. I have read and tried to follow workarounds including installers independent d/l that were presented on this forum as a solution to this problem. None of the 64-bit installer will install on my machine. In addition, given that the selection never install updates, by this Council, my Windows Update is inadmissible and just hangs. I ran scannow function and has been notified, a system problem has been resolved, but I'm unable to know which.

  I've had this laptop for a while and updates have always worked very well until they just stopped. Someone please offer a solution that works? Thank you

  Dell Inspiron 17 5000 Series

  Win 7 64 bit Home Premium SP1

  Please go to this topic and follow the instructions exactly as described:

  '

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c