T500 loses screen when ejected from the docking station

At my office, I use a docking station with external monitor (DVI join). If I ejected from the docking station, my laptop screen darkens. The only way I can do it works to turn it off, eject and restart. It works fine then.

I have the ATI graphics card, and I don't think that the switchable graphics works. Is it possible to use the integrated graphics card Intel when the battery power? This seems to be ideal.

Any advice will be appreciated.

Unfortunately windows don't remember installing icons when you switch your resolution. When you change the resolution would pass and spoil your icon arrangement.

Tags: ThinkPad Notebooks

Similar Questions

  • Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

    Hi all

    As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

    I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

    Any assistance received very warmly.

    Thank you!

    Hello

    Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

    Maybe's external screen connected to the docking station?

  • No bass when you use the docking station to not probe

    When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

    Yes! I finally solved it on my system:

    • Go to the control panel
    • Choose the material and audio

    or simply to display all Control Panel items

    • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
    • Wait for the program to come black EQ
    • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
    • Uncheck the 'improvement of Audio '.

    Fact

    In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.

  • Extremely frustrating mouse double click when you use the docking station?

    I have a mobile workstation 15 zbook and love it.  I have a docking station at work and even from one station to the House.

    When I plug the docking to the mouse House will be double-click whenever I have one click.  Simple click, I have to quickly move out of the object or it clicks double in each time.   I tried a new mouse, to reduce the speed of double click and is NOT the case on my docking station at work or when the laptop computer use with the mouse connected locally.

    It of extremely frustrating and makes working at home a pain rather than productive.

    You ask if anyone has seen elsewhere, or have any suggestions?

    Hello @romatlo,

    I read your post about how how your laptop will be double-click everything you click once when it is attached to your docking station, and I would be happy to guide you to a resolution!

    I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do it:

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/BD-p/BSC-274

    I hope this helps!

    Concerning

  • removing element from the docking station

    I looked past deletion of items in the dock of its simple posts, but I've tried them all. his Wondershare TunesGo I take them away from the dock, it doesn't go away I move it to the trash sound always there it goes back to the dock, any suggestions thx

    Hello

    Have you tried Ctrl click the icon in the dock, then select Options / remove the dock?

  • iPad tells me "Not Charging" when plugged into the docking station

    It is a very new problem for me. I had the iPad the same docking for the months and not had a problem. But now when I plug in, the iPad now tells me in the upper corner is it 'not supported' y at - it something I can do to fix this?

    There seems to be something that is changed with iOS modified 10 power requirements for the load.

    No idea when or if things will change, so all users can make use of the work load by plugging into the wall.

  • Additions/removing applications from the dock

    Hello
    two little question.

    1. is it possible to add/remove applications from the docking station? I have pictures and it iTunes for some reason or another, and I did not really need them.

    2 is. a similar question, possible to uninstall some of the Apps such as Notes, reminders, game Center, etc., or if not remove them from the desktop computer?

    Thank you very much

    1, Yes, hold down one of the applications on the home screen or to dock the iPad and after a second or two, they should start to tremble; You can then drag apps on the dock and on him (if you currently have 6 apps on the dock, you have to drag a stop until you can put a different application on it); Press the home button when you are done so as to stop the shaking apps

    2, no, none of the built-in apps can be deleted. For applications you mentioned (Safari and apps store can be hidden through settings > General > Restrictions) you could move to your last home screen or put them on a page in a folder app to make them less visible.

    Organizing applications: https://help.apple.com/ipad/9/#/iPad997db08a

    Records of the App: https://help.apple.com/ipad/9/#/iPad997daa3f

  • Internal network card is cut off when I remove my XPS M1710 the docking station

    Hello

    I have a xps M1710 laptop. I normally use a docking station and the internal network card works fine when the laptop is in the docking station. But now when I remove the laptop from the docking station for the network adapter is disconnected.

    I know that it stops when the battery mode to save energy, but it is always closed when I connect to a power supply for laptop. I tried the plug before you turn on the computer and it does make a difference.

    It's not happened before and I have to go to the internet on my laptop earlier, when not to use the docking station.

    Any ideas on how to solve this problem?


  • My mouse pointer moves in the opposite direction, I intend when I use the touchpad on my laptop. It works fine when I use my docking station and external mouse. How can I fix it?

    I'm using Windows Vista with a Sony Vaio laptop.  At the office, I have a docking station with keyboard and external mouse.  Everything works fine with this Setup.  But when I unplug the docking station and use the touchpad on the laptop, my mouse pointer moves in the opposite direction, that is my intention.  I move my finger and the pointer down.  I move to the right and the pointer goes left.  How can I fix?

    Go to start /Control Panel, and then double-click the icon '' mouse. '' When this window opens, select the tab "Touch Pad" at the top. There's a box near the bottom called "Touch sensitivity", click on that. Change the settings a little bit lower than what they are currently at.

  • Laptop with docking home & two monitors... need to get laptop to work after the withdrawal of the docking station

    It drives me crazy.  I have a work Dell laptop connected to a station host and two double monitors. It works very well at the office that I work mainly on two large dual screens.  When I remove the laptop from the docking station and bring home the computer starts and displays a portion of my homescreen (like an extended display).  But I can't do anything else with it. I can't access my files or anything.

    What I want to do now that I'm home with my laptop is to redo the settings so that the laptop is my main screen.  The normal methods of right click and change the screen resolution do not work because I can't access my Windows start tab.  Any ideas...

    Thank you.

    Hello

    Thanks for posting your query on the Microsoft Community.

    I would be grateful if you can provide us with the following information to determine the root cause of the problem.

    1. What is the number and model of your computer and the graphics card?

    2. Have you tried to monitor primary as secondary and vice versa?

    3. All device drivers are updated?

    Windows can detect automatically that an additional screen. If you connect two or more monitors, you must manually designate the primary display, arrange your desktop, and apply display settings, such as color depth and screen resolution. So, the next time that you connect these monitors, Windows automatically identifies the primary display and applies the settings that you previously specified for each additional display.

    Try the methods mentioned below and see if it helps.

    Method 1

    If you haven't tried Exchange monitors so I suggest you to try and see if the problem still occurs.

    To change the settings of two monitors you can consult the links below:

    Guided Help: Setup dual monitor is easy in Windows 7!

    http://support.Microsoft.com/kb/976064/en-us

    Change settings display on multiple monitors

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

    Note: This link is also applicable for Windows 7 .

    Method 2

    If the problem persists I suggest you to update the display drivers. As the display drivers for two monitors are not the same, so try to update and check the status.

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    See also:

    Work and play better with multiple monitors

    http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

    Setting up dual monitor: two screens are better than one

    http://www.Microsoft.com/athome/organization/twomonitors.aspx

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • I have deleted acidentally Dowloads from the dock. When I restored it I now get a huge page of each download I've ever done!

    I have deleted acidentally Dowloads from the dock. When I restored it I now get a huge page of each download I've ever done!  How to get back to the simple short column of downloads?

    Right-click on the file, view, options (size, type etc.) that appears, choose the ones you like.

  • X 200 with ssd OCZ blue screens at the start of the docking station

    The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

    The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

    I tried to update the firmware on the ssd using this utility

    http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

    The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

    I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

    Any ideas or suggestions are greatly appreciated.

    Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

  • Put automatically the laptop to sleep when removed from the base?

    Hello

    Many members of our society are using portable computers. However they all use docking stations when in the office. Nature from home they all simply press the eject button on the docking station and put the laptop in their bag. As you know that the laptop stays on since there is no action in the Power Options, simply what happens when "I close the lid.

    Some have killed cell phones in this process, it is recommended to put the computer to sleep manually start before removing from the dock menu and go about your day, but naturally not everyone follows this process.

    So is my question there a framework built in Windows 7 that will put the computer to sleep automatically in case the laptop lid is closed under power and is suddenly disconnected from the power?

    I have searched through ACPI configurations but came empty-handed.

    Any help would be appreciated!

    In addition, we are a boutique HP and use their cell phones of class business.

    I think that implementing standby when the lid is closed so that hip will probably solve it. Unfortunately I can't imagine a way to detect if it is not connected to the dock because as much as I know Windows doesn't support that.

    Apologies, I couldn't help-maybe someone knows if it is possible?

  • Failure of Options when you click the Dock icon to include 'Desktop in the display (number).

    Failure of Options when you click the Dock icon to include 'Desktop in the display (number).

    I use an iMac 24 "mid-2007. The help documentation tells me how to assign an application to a space is to use this Option. But it does not, while the other three are. Is this an error or something that can be explained? Could there be a work around? My OS is El Capitan.

    Hi peterwhi,

    I understand you are trying to set an application to open its windows on a particular space. To do this, move to the space that you want to use for the desired application, and then choose 'The Office' in the list of options you mentioned see (under Options).

    OS X El Capitan: working in multiple spaces
    https://support.Apple.com/kb/PH21872

    The option that you describe as missing is displayed only if you have connected an additional external display to your iMac and would set the app to open on the iMac screen or the external display.

    Office on the screen [number]: the application opens in the current space on a specific screen (if more than one display is available).

    Sincerely

  • sound on laptop lost when it is connected to the docking station

    laptop connected to the docking station and audio comes through the audio connection [headphones] on docking station.  No sound on computer

    Hello

    ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

    When you connect the laptop to the docking station, the default audio output device will automatically change to the docking station. Similarly, in the case of plug in the headphones on laptop. I suggest you to check if the audio device by default from computer speakers is properly defined. Follow these steps:

    a. click the Start button, select Control Panel, click hardware and soundand then click sound.

    b. click the read tab make sure that the correct default audio device is selected. (For most users, the default audio device is pregnant.)

    c. If your default device is not set to the right audio device, on the read tab, select the appropriate device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, click OK.

    d. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.

    If the sound settings are set correctly and that your speakers are already set as default device, go to "Check if an audio driver is installed" now.

    e. Select the audio device you want as audio device by default, and then click set as default.

    f. click OK to save your settings.

    For your reference, follow the steps described in the following link:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

Maybe you are looking for

  • Qosmio F60 - 00Y - Intel RST, TOSHIBA PC Health Monitor crash

    Hello All started having problems today with my Qosmio F60 - 00Y bought June 2010. I have an extended warranty but I wanted just a quick fix since the system is still operational. Because I lost my recovery to factory settings I can not reset my syst

  • SL400 adding 4GB memory

    I just installed 2 x 2 GB memory ram and when I check in XP it DOES not show the 4 GB Ram 2.96. I see in the lenovo website it says that SL400 can go up to 4GB. Does anyone know how to fix this problem to see the 4 GB of Ram? Someone said to change t

  • How can I make E709n as a network or a wireless printer

    The printer works fine when connected directly to my laptop via a USB cable. I have now the printer to pick up my router and you is connected wireless using the network password. It is still not printing wireless. Can someone help, please? When I rig

  • ASR vs router ISR for encrypted traffic

    I'm looking for a router that can handle up to 1 Gbps of traffic encrypted through a GRE over IPSec connection.  We currently use a 2951-SEC/K9, who overcomes to 80 MB/s @ 70% of the CPU.  I've been watching 3945 SRI but question if an ASR 1001-X wou

  • The EBS Version control tools

    Hi allWe are on request R12.1.3. We want to implement for E-Business Application version control. Any change in the application is performed in a controlled manner.Please indicate if there are tools available for E-Business applications version contr