T510 replacement screen HD - one which?

Similar Questions

• Problems of replacement screen satellite C670

  Hello

  I was wondering if someone could help me?
  The screen on my C670 works but has visible damage and a lot of dead pixels,
  I bought two replacement screens, but have been unable to operate them, any more than the backlight to come.

  Two replacements were returned to where they were purchased and are tested and found to work very well, I am now at a loss at what to do next...

  I don't really understand what could be the problem the two substitutes did not work but my original works well... surely if there was a problem with the connector of my screen does not work either?

  My screen is a LP173WD1 (TL) (N1) and the replacements have been N173FGE - L23 and LP173WD1 (TL) (E1) which I was assured were both compatible with my device.

  Thanks in advance

  Ealdra

  Post edited by: ealdra

  Hello

  As far as I know, there are different sets of Satellite C670.
  I found some details about the PSC3SE, PSC3NE, PSC3LE, PSC3QE of the submodels.

  It seems that the LCD module 17.3 "W HD + (1600 x 900px) uses a backlight LED as the light source.
  Then you should be sure that you use the right one.

  I don t think that the view on the motherboard controller is faulty because in this case the original display would not work too.

  The LCD screen and motherboard are connected by cable, inverter, the inverter Board and
  LVDS cable. You must ensure that the LVDS cable is firmly connected to the motherboard.
  If the connection is loose, firmly reconnect and restart the computer C670.

• ZD 8000 replacement screen

  Hello

  I was given a HP Pavilion zd 8000 (8200 CTO Notebook zd) who has a cracked screen. It measures 17 ".

  It starts up fine and everything else seems to be in working condition.

  The part # on the sticker attached to the bottom of the laptop is: PF456AV.

  Can someone give me an idea where to buy a replacement screen?

  Thank you.

  Laptop computer screens.com has one, but they list 2 resolutions.

  http://www.LaptopScreen.com/English/model/HP-Compaq/Pavilion~ZD8000/

  They also have a search engine you enter the number of the model to the screen itself. There are instructions on their site to find out which is the correct model of the screen number.

  When the laptop was always together you would be typed in the information system to find your real solution. See screenshot.

  

  You can not you because your manual is a model CTO (custom order) so who knows what is there for you.

  Computer laptop-screens.com also lists a simple lamp and double. If you look at the bottom of your screen, you will have 2-wire or 4-wire coming out of the bottom. 2-wire is a single lamp and 4-wire is a double lamp.

  There was also a LED screen available as well, it will be very obvious if it is DIRECTED, because there is no converter and no wires coming out of the bottom of the screen.

  The matte finish or bright, it's you.

• Replacement screen dv7-7121nr problems

  OK, this is my last attempt to get help on this. I have a screen broke on my DV7. This is the DV7-7121nr with beats. I have a replacement screen I bought at HP on Amazon, but I can't get off the bezel for the life of me. It's like a face 2 clip which seems to be impossible to get off.

  Can someone help if you did or you know how? It's quite urgent...

  (name of the edited section)

  Here is a link to a youtube video showing the procedure for disassembly of the screen:

  http://www.YouTube.com/watch?v=JXjIkD7IQOg

  Once you have the top and two sides broken loose, you can use your fingers to break up the background. Equivalent of the top inside the low side of the bezel. It should just pop right off the coast. This particular model has no screw on the bezel. The cover hinges should not keep the glasses come off.

• Where to find a replacement screen for Equium L10?

  Any advice where to find a replacement screen for it please for the L10?

  Hi neal

  You want to buy a new LCD for the Equium L10?
  Laptop LCD is one of the expensive laptop parts.
  What do you buy a second hand Satellite/Equium L10?

  Many users selling second-hand portable computers and especially the screen functions.
  In my opinion, you should check if you can get a second hand with a LCD unit because especially second hand units are less expensive as a new view.
  But you know, it of your choice.

  PS: Each part, you can get from the authorized Toshiba service point in your country.

• 19-2113w HP: hp 19-2113w while a replacement screen

  I have a hp all-in-one 19-2113w ' g4b06AA 'I have cracked the screen and need to replace it. " It's not under warranty. Can you please tell me the number of replacement screen model. I can still use most of the screen, but here to keep it going until I can get the new screen here. Thank you

  Hello

  Copy the part from following link number:

  http://PartSurfer.HP.com/search.aspx?SearchText=G4B06AA

  (You can to bookmark the link above for future reference).

  You can buy in this store or use the part number to buy elsewhere like Amazon

  Kind regards.

• Pavilion g6 - 1d18dx turns is not on after replacing screen

  Hi all

  I have a HP Pavilion 1d18dx g6, which lights up ANY after that I replaced the screen. The power lights do not light when I press the power button. When I plug in the AC adapter, the light near the orange plug is not even turn on. I also tried to plug in the AC adapter without the battery inside, but again - nothing.

  I replaced the screen because he had cracked after that I walked on it. Although the screen was broken, the computer itself has worked well. I continued to use it with an external display.  After what seemed to be a successful replacement, I pressed the power without answer button.

  My question is: I did something wrong during the replacement of the screen?  I need help to determine what went maybe wrong and what parts I should look / replace. HELP /.

  PLEASE AND THANK YOU

  Product number: B3P85UA #ABA

  Hi @brisl0 ,

  Thank you for visiting the Forums HP's Support and welcome. Thank you very much for the detailed information on the replacement screen. Here is a list for your page 72 of the manual. Page 70 has the power on that connector. That should be checked as well.

  I inspect the motherboard in order to have a crack or damage on it.

  I hope this helps.

  Thank you.

• Replacement screen

  Hello. I am a missionary in the Kenya, and I try to help another missionary to get a replacement screen for their g6-1108EI Pavilion laptop. We have not been able to locate one, but I found screens for the 1108TX and 1108TU models. One of these screens would be compatible with the 1108EI model?

  Thank you.

  Orgeuillit

  pastorforbe wrote:

  Hello. I am a missionary in the Kenya, and I try to help another missionary to get a replacement screen for their g6-1108EI Pavilion laptop. We have not been able to locate one, but I found screens for the 1108TX and 1108TU models. One of these screens would be compatible with the 1108EI model?

  Thank you.

  Orgeuillit

  Through the 24 Page in this manual

  HP part number of 39.6 cm (15.6 in) high definition BrightView LED display panel -647623-001

  Both 1108TU & 1108EI has the same block display & sous-composants, and the part number is the same.

  You can order the HP part for replacement.

  HP PartSurfer

  Online store:

  Amazon

  Concerning

  Visruth

• Replacement screen for HP Pavilion G6 2208eo

  Hello everyone

  I walked accidentally on my laptop and now the screen is cracked in a corner.

  It's a HP Pavilion G6 2208eo with a 15.6 "display.

  Can someone tell me what screen new I need to buy to replace the cracked one? Are all the screens for Pavilion G6 compatible with my laptop?

  I hope you can help me.

  Thank you

  rasjessen wrote:

  Hello everyone

  I walked accidentally on my laptop and now the screen is cracked in a corner.

  It's a HP Pavilion G6 2208eo with a 15.6 "display.

  Can someone tell me what screen new I need to buy to replace the cracked one? Are all the screens for Pavilion G6 compatible with my laptop?

  I hope you can help me.

  Thank you

  Hello

  The reference is 681817-001.

  http://www.Amazon.com/15-6-WXGA-glossy-screen-681817-001/DP/B00906G61C

  It is difficult to tell if they are all compatible. It depends on where the vga cable connector located on the back of the screen. This reference is compatible with the Mobile Intel and AMD series G6-2000. There is a different number for the G6-1000 series laptops, but it is because it was manufactured before 2000 G6 series and they used different parts for this. Maybe it is compatible, but you need to know where the port on the back of the screen display cable is initially.

  How to:

  http://bizsupport1.austin.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=5296082&targetPage=http%3A%2F%2Fbizsupport1.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc03593041%2Fc03593041.pdf

• Replacement screen for a Pavilion g6z - 1 00

  I have:

  -HP Pavilion G6z - 1 00

  -Windows 7 Home Premium (64-bit)

  I need some sort of something that I can search the name for these parts:

  LCD screen,

  -framework

  -the back cover (Red)

  I know that is only the screen and the plastic casing is the question of anything else. The webcam works fine, so most probably the built-in mic still works. I just bought the laptop in March and I broke the screen to fall when the guard rail broke and apparently HP does not cover these types of accidents in their warranty and should be $320 + just to fix it.

  I understand that apparently the Director of tech told me that the people who get their replaced screens that they receive some kind of issue and they end up using the HP service be it, but this isn't in my budget right now. Over $ 320 is 60% of what I paid for the laptop in the first place, I have mine as well get a new one, but this one is special for me.

  This screen will work:

  http://www.eBay.com/ITM/new-display-for-HP-G6-1D48DX-15-6-laptop-LCD-screen-led-HD-A-/190701327869?PT=US_Laptop_Screens_LCD_Panels&hash=item2c66af55fd

  Plastic parts will eat you all thought was crazy:

  http://www.eBay.com/ITM/639501-001-new-HP-Compaq-rear-display-cover-G6-/261080657205?PT=US_Laptop_Housings_Touchpads&hash=item3cc99ead35

  I don't know what you mean by the framework to be more precise, and I'll see if I can find the part.

  I think that you should lose your attachment to this laptop or maybe just to buy one another just like it and swap your hard drive. It will be cheaper.

• Replace screen green Mocha & follow-up with perspective problem

  So I have these images;

  https://www.dropbox.com/s/tqtfcg5m7rw35wd/phone%203.m4v?DL=0

  1. which requires the phone to be tracked and replaced the screen. I am familiar with mocha AE and can easy follow up but lose track completely when the phone is off the hook in the beginning and when the top left of the phone turns off the screen. No idea how I can solve this problem of follow-up? I have actually some more shots like that have the perspective and thumb-finger obscuring the phone, so none of the shots are very frank. I can't find any tutorials on the topic in depth.

  2 I used Keylight for touch on the green screen (workflow; Color touch - switch to the status display, black clip adjusts the gain of the screen, white clip) but I had to cut the white as the images on the guys hand now dances autour, as is the noise. That is almost like the layer's mode "dissolve the dance." Well, I guess it's because I cut so white... A few tips on this would help me lot too!

  Any help would be appreciated!

  Thank you!!

  I took your film and brought in After Effects.  He was very small, so I doubled the size of the model, and then added some exposure compensation and detail preserving high-end to give me more pixels to work with. I then exported a sequence of images to use in Mocha. The sequence of images was imported from AE and a new created model which corresponded to it. I selected Track in mocha.

  After analyzing the images, I realized that I had problems in the first few pictures because of the motion blur and depth of field. There is a black bar at the top and bottom of your film and which would also cause a problem. The solution is to create a spline X first to act as a grip on the tracker.  The second step was to create a set of X grooves on a new layer covering the sides, top and bottom of the phone. I started on a frame that shows most of the phones. The layer was on top, the tracker below layer. I followed with interest, then repositioned the CTI for the start of the track and followed back until the track began to fall apart.   Backup of the last tract good framework I have change to set track and completed manually tracing. It took only about to keyframes. Then I adjusted the surface and refined the track using the 16 x 16 in a super grid.  The track was closed and I've added a new X spline to use as a Roto for the thumb. I have isolated the part of the thumb covering the screen only.  The layer of Roto was locked to the track and then adjusted and fringes of edge has been applied.

  When this was complete I first exported mocha for the layer of Roto shape data.  Back in AE I duplicated the layer of film and pasted Mocha shape data to the copy that gave me a perfectly hidden copy of the thumb.

  The last step was to take the replacement screen image and add to the timeline and then secure the composition and then before dialing. Back to mocha, I copied code confidential from corner of the layer and glued to the replacement screen demo data.  By arranging the layers with the original film on the bottom, replacing the following screen and thumb on top of the implementation of the composite for final adjustments. Setting of the motion blur and focus on the replacement of the screen to complete the project. Total duration of approximately 15 minutes.

  Your film would, in fact, a good tutorial because of his problems. With your permission, if the sequence is yours, I will when I have time. The point is that you should analyze your film and then decide on the best technique to achieve your goal. Same horrible images can be used. You must analyze the images and then decide the best technique to achieve your goal. Any film can be tracked manually in a reasonable amount of time using the proper technique. He really successfully complete your film was enough to improve the contrast and exposure to follow up and do a bit of work by hand.

• Satellite T135D-S1324 - where can I find a replacement screen?

  Well, I don't know how, but my new laptop (buy 50 days in best buy when I travel to Los Angeles) has a broken screen. It seems that he has been hit by something, but I NEVER hit him with anything.

  The excellent work of the laptop but it is very painful to see all broken lines in the screen, but I hope that I have fly can use and work very well.

  My main concern is that I can't FIND ANY LED BACKLIGHT SCREEN 13.3 of TRUE HD, I'm of the Argentina, and here, they only replacement lcd screen. A friend told me that he can buy the replacement in the Amazon but I can't find screen replacement Toshiba led (only from hp)

  Anyone know where to find replacement screen for this notebook?
  or if all the screen works in my toshiba? http://www.Amazon.com/s/ref=nb_sb_noss?URL=search-alias%3Daps&field-keywords=replace+led+screen+13.3&x=0&y=0

  THANKS A LOT :)

  Hey,.

  To be honest, I also don t know if another screen replacement would work

  AFAIK T135D-S1324 is for the American market, then you should contact the guys there. Maybe they can send you a screen replacement or something else. Simply contact the guys.

  Laptop parts are specific designed for a laptop series you should buy a replacement of an official authorized service provider.

• Satellite U500 (PSU52E) - where to get a replacement screen?

  My laptop computer screen of my Satellite U500 (PSU52E) broke. Can someone recommend where I can buy a replacement screen?

  Thank you

  Hello

  You can get a replacement from an authorized service provider screen:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Guys can order all original spare parts in order to get a spare part of Toshiba compatible and original guys. :)

• Envy 15 t: M9U50AV necessary replacement screen

  I cracked my screen and need to get a replacement screen.

  It's a

  HP ENVY - computer laptop 15 t

  Product number: M9U50AV

  The screen is listed as

  •diagonal 15.6-inch HD WLED (1366 x 768) display

  I'm just trying to identify what replacement screen to buy.  I'm really amazed that this information seems so hard to find.  I also have the serial number of my machine if that helps.

  Thanks in advance for any help.

  That is the answer I received the laptop engineer. He used another product number in the Envy 15 t series as your and my product number is not yet active in surf part.

  "Since it has a HD screen then 812702-001 would be the correct option. The others in the list are FHD or UHD. »

  http://PartSurfer.HP.com/search.aspx?SearchText=L8Y97AV

• The inverter for my Satellite L450D - 11G replacement screen

  I think that I need a replacement screen inverter for my Satellite L450D - 11G.

  Site Web de Toshiba send back me to Dixons / PCWorld and Currys digital for repair.

  Toshiba have a Service Centre in the South East of England where I can get it fixed?

  I prefer to deal directly with Toshiab if possible.

  Thanks in advance for any response.

  > Toshiba have a Service Centre in the South East of England where I can get it fixed?

  Here you can find the database with all Toshiba ASP worldwide:
  http://EU.computers.Toshiba-Europe.com/-> support download &-> find an authorized service provider