T520 RX LED always on andTX

Similar Questions

• Gel W520 and HDD Led always on

  Hi, I have a new i7-2820 W520, 8 GB Ram, NVidia 1000 M, SSD OCZ Vertex3.

  After some problems with AHCI and SSD controller now it works very well, with all the drivers installed properly, but sometimes (1 or 2 times a day) the system freezes and the hdd led remains always on (flicker). I can move the cursor of the mouse on the screen, but I can't do anything else and I have to restart the system (by pressing the button for 5 seconds)

  Any suggestion?

  Thank you

  Luca

  First of all, don't do anything when you get the gel and see if your W520 thaw on its own until after 5 minutes. You can then check this entire thread for the many "bugs", but attention to the #9 message.

  http://www.ocztechnologyforum.com/Forum/showthread.php?87349-new-OCZ-vertex-3-stalls/Page2

• Tablet 2 green led always on?

  Hello all, first time poster here. I had MANY problems recently with my 2 Tablet, due the send twice, but it seems to work perfectly.

  I just noticed, however, and maybe that's there all along, that the green light under the web cam is always on (except when the Tablet is completely off). Is this normal? For some reason, my recollection is that this light only when charging or when initially turn it on?

  Maybe I'm just paranoid lol... any help would be appreciated.

  Best,
  SIA

  Quite curiously... just did a series of Windows, restarted... updates and the green light has disappeared... strange. Thanks for the help anyway!

• BlackBerry Smartphones solid green LED ALWAYS

  Hey, it's really bugging me. I have my indicator of coverage off the coast, I have not new messages/calls/something like that, but there is a solid green LED on my Storm all the time. He has served for the past 3 days. I did a battery pull, and back in the Green LED came on immediately when I put the battery. I let my battery to fully discharge and then recharge completely, so my battery level was anywhere from 0% to 100% and the Green LED was on all the time. I know there was another thread on this forum about a flashing green LED, but mine remains STRONG, so I was hoping that someone would be able to help. Any ideas?

  Well, I had the light turns off. I think that the Green LED continuously when you have a load of 100% and it is still on the charger, so I left it completely load, then took it off the charger and it must have fixed.

• Qosmio G50 - HARD drive blinks every second

  Well, if she's here,

  I have a Qosmio G50. I installed WindowXP Pro 64-bit.

  I noticed the hard drive light flashes every second. I spent some time searching the net for a soultion. This led me to download a utility called "process explorer" from microsoft.

  This utility show me that the active process is services.exe. The properties of this service suggest that it handles "eventlog" and 'plugplay '.

  I realize that I can't go to the event log, nor what I want.

  Can anyone help?

  Thanks in advance.

  Hello

  The HDD led always flashes if it read all the data or written to the HARD disk.
  The service.exe (Service Control Manager) belongs to the Windows operating system and it s of Microsoft which is necessary and my knowledge background process, it cannot be disabled.

  Good bye

• Re: 550 d NB - how to activate wireless ON / OFF - FN + F8 does not work

  Hello

  I have a NB 550 D which works very well, but want to know how to disable (& suite again) the connection Wi - Fi to save battery & also if you use the netbook on plan.

  I tried to press the function key & F8 which shows it as being off the coast but not wireless key seems not to do something (led always on wireless)
  I do something wrong? y at - it another way to do this

  I don't understand what the problem with FN + F8. It should work.
  In any case, try to disable the wireless network adapter settings in Config Free.

  You can see the Config Free icon in the taskbar. Click with the left button of the mouse top and down to the WLAN card and use the Disable option.

  It works for you?

• Re: Failed to start General on the Satellite A300D-158

  Sorry for my language, but that little bit difficult for me.
  After 2 years of using this cooler model and drive hard breaks down because of overheating. Generally, the system worked. After disassembly and replacement of cooler, I got new problem - system is not starting at all. Power and battery LED always indicates "supported", all caps to the motherboard are properly placed, graphics card connected correctly, too.
  After putting in the work of the indication for a few seconds, cooler rotation begins, but screen remains black and after a few seconds system stops.

  What can be graphics or Mo? Please advice.

  Who knows what you are doing... Again, check well all if all cables connected correctly.

  > After work indication start for a few seconds, cooler rotation, but screen remains black and after a few seconds system shutdown
  > down. What can be graphics or Mo? Please advice.

  If it's a problem of graphics card, the laptop is remained working with white screen. But in your case, it works for a few seconds and stops.

  > After disassembly and replacement of cooler

  Check if the Cpu is mounted well, I think it's a troublemaker. Replacing the fan could touch.

• Impossible to completely disable a command grayed out button

  Hello! Everyone,

  I thought that this matter has been resolved before, but it back once again.

  Please take a look at the code in the attached draft.

  If the call to "Delay (5)" is placed after "ProcessSystemEvents()" called in the A_Callback() function, B - LEDs always do anything!

  Shading or make invisible B button is not disable the command button at all.

  Only when I placed the call "Delay (5) ' before the 'ProcessSystemEvents()', the B button will be disabled.

  Just by dimming button B, without "ProcessDrawEvents()" and "ProcessSystemEvents()", will not ensure that the button is disabled.

  I'm puzzled.  What is the proper way to completely disable a command button?

  This problem occurs only in 6.0 CVI?

  If you need to call ProcessSystemEvents in order to ignore clicks on a button depends on what you are doing at the time when and where you you undim control.  The original question came when the button is gray and more blurred in a callback.

  CVI differs from event processing while you're in a callback.  If you're not currently in a reminder, a click event will be processed when it occurs.  If the control is dimmed when the click occurs, (once again, outside of a reminder), the event will be treated and ignored and you need not ProcessSystemEvents.

  Or if you dim the control from a reminder, click the control, and then quit the recall without undimming the control, the event will be handled with the dimmed control and will be ignored (without the need of ProcessSystemEvents).

  So the big question is when you undim control?  If you the undim the end of a long reminder, then you call ProcessSystemEvents.

  But if, for example, you open a panel with a dimmed and then control it undim after something else, you don't need ProcessSystemEvents to ignore the click.

  Let's say you have a panel with a control for the user to select a file name and a button to print the selected file.  You don't want to print to be active until the file is selected, so it is dimmed by default initially.  In a callback for file name control, after the user selects a file, you can then undim the print button without the need to call ProcessSystemEvents.  Any click button print previously sifted is already been ignored.

• WAG 354 G v1 that annexed cannot connect to talktalk.

  I try to connect to talktalk and impossible to get. DSL led always flashing amd show me trained and nothing. I have the correct settings. When I connect my talktalk modem everything its fine. Any sugestion?

  Please explain your problem in detail... How does your ISP? What setting you have on your modem?

• BlackBerry Z30 how to restore the factory os after re - install 10.3.1.2243 via knowyou research Canada-Rogers?

  Hello

  I have a problem after re-installed os for my z30 via knowyou search Canada-rogers-z30 bone.

  I re - install the rest of this answer: http://supportforums.blackberry.com/t5/BlackBerry-Z30/Model-Blackberry-z30-charging-upto-60-only/td-...

  My problem:

  1 - my loss of phone Apps, frame, message, contact staff... when it restarted.

  2. it only loads up to 60% when running, but when stopping it can charge full (100%).

  Red led always blinks 3 - it.

  Please help me solve this problem.

  or tell me how to take back the factory OS.

  so thank you.

  Hi @dinhhv

  From the symptoms you describe, especially how any changes you make on your device are lost whenever you restart, run the tool in KB @sdgardne mentioned previously (pasted again below).

  KB36747 all data are deleted after a manual restart of smartphone BlackBerry 10 and has THE blue...

  After you run this tool, can you confirm if the tool says the patch has been applied, or no patch is necessary?

  If the hotfix has been applied, please reboot your device and let me know if the changes you made before you restart are kept.

• Replace the power supply on my m9340f

  Hello

  I own a Pavilion Elite m9340f and I need to replace the power supply (it has the original), because the power on button failure, which I did research on forums and the solution replaces the power supply (psu led always on, for example).

  But I need to know exactly what kind of food I buy (amp, voltage, PIN number, dimensions, etc.) because I need help on the specifications.

  I'm not planning to upgrade the motherboard the case, original hp. I read in another post something on the power restriction and benicia supporting more than 450 watts power supply motherboard. I find this absurd information, because components draw necessary power from the PSU without worrying if it's 350 or 700 watts. So is one of the things that I need to be confirmed if there is restriction of power.

  Thanks in advance,

  Prince of Jeronimo Ramos

  Jeronimo, welcome to the forum.

  I believe that any standard ATX PSU must be inserted into the case.  I like Corsair and OCZ.  They are excellent manufacturers.  I suggest to measure the PSU existing and comparing measures to whichever you choose.  As far as I know, there is no restriction on the power.  I did this for a long time.  More than 550W to 600W in your computer is not necessary, however.

  If your problem is solved, please click "accept as a Solution.

• MWI light does not illuminate

  I use CCM3.3 (5) with the 4.0 unit (5) MS Exchange.

  I had Setup for failover of the unit and worked well. but I can't get the MWI switch work. The phone is able to compose the MWI extension, I opened the port status monitor and update the status of the MWI, I see that the port is 'component the MWI', but the light comes on.

  I followed the guide MWI, troubleshooting and the notifier showed code "12" and the task is complete. But in the newspapers of Miu, I can't find the command SetMWI. I changed the message to be always urgent in subscriber > Message, the led always lights.

  Any thoughts?

  Thank you

  When you manually dial MWI or disable the phone number, it turns the light (or turn off)? You said, he does not fast busy...

  Now, in the traces, look for dd = "1234" where 1234 is your MWI on or off number...

  This is where you should start. It will tell you what partitions it is looking, in the analysis of the figures etc... If all goes well, he will tell what is happening. Feel free to post the tracks here.

  Info that you have given us, it looks like a MAC problem.

• Windows Update fails in Windows 8, Windows 8 running on VM VirtualBox

  Original title: Windows Update failed in Windows 8

  Windows 8 Pro is installed on it; no antivirus, no 3rd party service.  I got the download of Windows 8 students of the MS upgrade because the license I had was for XP OEM.  Their online store said I couldn't go directly to 8.1.  In order to get the cleanest system, that I could get, I reinstalled XP Pro from scratch.  The MS store forces installation of the upgrade of Windows 8 to help them ensure the Download Manager.  Yes, steps up to now:

  (1) install XP OEM

  (2) install all the XP updates

  (3) download and install the upgrade to win 8 using the secure download manager

  (4) apply Windows 8 updates so I can finally get to the 8.1

  It may also be important to note that this facility is running in a VirtualBox VM.  I bought XP OEM disc when I got the laptop (Lenovo T520), but have always run Ubuntu Linux on the host computer.  So my reading on the Windows license is that I have no problem there.  The steps above take the largest part of a full day; so I'm a bit reluctant to reinstall again from scratch.

  Finally, the Windows process update Gets an update to KB2785094 which fails.  I got a few different errors and passed through all stages troubleshooting recommended in the KB and this forum that I could find.  Errors include 80073712 and 8024afff.

  Troubleshooting steps tried:

  (1) run the file system, by http://support.microsoft.com/kb/957310 Checker

  (2) attempt to relaunch Windows Update

  (3) run DISM, by the same thing.

  (4) attempt to relaunch Windows Update

  (5) run the Windows Update troubleshooting tool, by http://windows.microsoft.com/en-us/windows7/open-the-windows-update-troubleshooter

  (6) attempt to relaunch Windows Update

  (7) to run this Windows Update utility online by http://support.microsoft.com/kb/2714434/en-us

  (8) attempt to relaunch Windows Update

  9) restart in mode "clean boot", by http://support.microsoft.com/kb/929135/en-us

  It wasn't anything to turn off except the app tray Virtualbox Guest Additions, since it is essentially a new installation

  (10) attempt to relaunch Windows Update

  (11) see the same mistakes over and over again.  8024afff seems to have disappeared, but 80073712 keeps recurring.

  A problem I noticed with the application of the DISM is that article that says: "If your Windows Update client is already broken, use a Windows installation running as the source of the repair, or use a file side-by-side Windows from a network share or removable media, such as the Windows DVD, such as source files. To do this, run the following command instead:

  "DISM.exe / Online/Cleanup-Image /RestoreHealth/source: C:\RepairSource\Windows /LimitAccess.

  Unfortunately, due to the screwy way, Microsoft provides the installation files during the upgrade as I did, I'm not aware of having any source of repair.  If anyone knows where the secure download manager puts installation files that could serve as a source for execution of DISM?  Other other ideas that made the exact same installation and expect a different result (one definition of insanity)?

  Thank you

  HI Mel,

  Thanks for posting your query on the Microsoft Communities.

  Appreciate your efforts in order to solve this problem.

  I wish to inform you that since your Windows 8 operating system runs on Virtual Box VM, I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.

• Satellite A500 - 14 k - HARD Drive LED indicator always flashes

  Hello

  First sorry for my bad English

  I'm french and I recently bought a Toshiba Satellite A500 - 14 k (http://fr.computers.toshiba-europe.com/innovation/product/Satellite-A500-14K/1072806)

  I have a little problem with this laptop and I don't know if anyone has a solution

  The HARD drive light flashes constantly (1 blinking per second) even in safe mode. I checked some forums and I learned he had something to do with the function of autorun cd /dvd CD/DVD recorder.

  If the autorun feature is disabled in the windows registry (HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servi ces\CDRom and the key value goes from 1 to 0) the flashing disappears, but I can't access my data from CD or DVD (media are marked as empty). However, the audio CD and video DVD work except that they cannot be started automatically.

  The same thing happens if the CD/DVD writer is disabled in the control panel Device Manager: the led indicator has a normal activity.

  I would like if this problem occurs with other owners of this product and if there is a solution to use normally without this flash recorder

  Thank you

  I don't have A500 but A300 and I can't say with certainty why this and what kind of HARD drive activity is ongoing, but what you can try is to remove some pre-installed Toshiba stuff like TEMPRO or pre-installed application antivir.

  When the laptop is new days that many updates will be installed and in the background is always a certain activity. Automatic update is disabled?
  Try also to remove TEMPRO. This tool is active permanent and search for updates.
  Try to optimize the operating system preinstalled and carefully monitor if something will change. I always do after clean operating system installation.

• T410s HDD LED lighting is always that the charger is in.

  I bought Lenovo T410s in pretty bad shape. I decided to refubish one, because I have a few spare parts of T400s. So I disassembled the laptop, cleaned that and installation rear. Because the LCD is faulty, I changed the LCD set (I put all the T400s), changing only the LCD bezel (but the only difference between the bezzel is model registration on it).

  I have instaled the dos system. After completing the installation of the system with all the updated drivers, I noticed that the LED on the HARD drive in the LCD (one under LCD) Panel is always lighting that the charger is in. When I take out, she stops lighting. Anyone knows what might happen?

  I know for several generations and years of experience with maps of system case and regular round, if the HARD Drive LED is connected backwards, the light is always when there is power to the motherboard.

  Good luck!