T530 - strange problem with RAM after BIOS update
Hi all
tomorrow I update the BIOS to the version the most recent (2.58), after this operation, my laptop cannot start: by pressing the power-on button displays only a black screen and the market led...
I have tried everything I can do to make it work, I was ready to call for a repair under warranty support, when I tried to remove the extra 4 GB RAM: whitout it my laptop starts fine... I try to replace the module with an another 4 GB, which is new, but without success.
So, after updating the bios I can use my laptop but without the additional RAM modules installed... obiuvsly, it works fine before.
Is a defective motherboard\memory slot or there is something that I can check? I need at least 8 GB for my work...
Thanks in advance
k.
You should have 1333 or faster
Tags: ThinkPad Notebooks
Similar Questions
-
Still having problems with Itunes after music updated to iOS 9.3.2
How can I solve the problems created by the software update Apple iOS 9.3.2 lost all my music will not restore using itunes etc
What questions are you talking? Music of Apple, it's where you posted what you use? What music has been lost? It's all in your Apple's music. The rest should be in your iTunes library on your computer. I have almost 2K songs in my iTunes library and they have all been there since the very beginning, across all iOS and iTunes updates.
What happens when you try to restore your phone to iTunes? What it the music has to do with whatever settings you have for music and once again, depends on your participation with music Apple or any other service.
Try it please take a moment to build a question, describing what occurred, what device you use, what computer OS you use, and what troubleshooting steps you tried to correct. In addition, you use the services of Apple, and have you backed up your phone and your computer.
-
Satellite Pro C850 - problems with WiFi after Windows update 8.1
Hello
I was wondering if someone could give some advice on a problem I have.
Had an adjustable C850 Pro for a few months and worked well on Windows 8.
I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.
For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).
I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
Then I noticed that I'm supposed to install a bunch of drivers in the order.Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *
Any kind soul there suggestions on a way forward? Pls.
I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(
Hello
> I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.Details:
http://www.Toshiba.EU/innovation/generic/windows8_1-message/Solution?
Back to Windows 8 (reset the system back to factory settings)
Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade pageOn the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!
-
Problem with Satellite A200 BIOS update
I recently installed the alert software from Toshiba - through it, I received an alert to install software to improve my Satellite A200 1GH.
After installing this software I've probably updated the BIOS and now I could not the computer because he wants a password already from the bios.
I do not managed any password before.
Please help me solve the problem! Is there a possibility of losing information with this situation?Hello
No you can not lose any information, but in your case I would check for a more RECENT for your system BIOS version because there are some discussions were that other users had the same problem.
A user reported that a NEWER version has been released and the problem has been resolved, but you should check for it here:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Otherwise, it would be necessary to set the machine to an authorized service partner. If you need a link to find the one closest to your country:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT
Good luck
-
Problems with printer after windows update on Vista
I am running Vista Home premium 32-bit with SP1 and have an Epson SX215 printer. I have Noton antivirus installed.
My printer will not respond after installation of recent updates. Remiain of items in the queue for printing and the caanot be deleted. I tried Mr. Fixit for printer problems, but it just crashes evenn after leaving 2 hours to run! I tried the system restore, but I just get a message saying "unknown error found no changes."
I can solve the problem by resetting the PC to the settings to factory, but when I load these recent windows updates again that the problem comes back.
Help, please!
Hello
What updates caused the problem to occur?
Look for updates in the update history.
a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
(b) in the left pane, click view update history.
c. to display more information about an update, double-click it.
I suggest that you realize the following methods and check if they help to solve the problem.
Method 1:
(a) click Start, go to control panel
(b) select system and Maintenance
(c) select administrative tools
(d) double click on Services
(e) in the services list, scroll down until you find one called "print spooler".
(f) make a right clic on "Print spooler" and "restart".
(g) "suppression" of work will be lost and all work queued in your queue will print.
Method 2:
I would completely uninstall and reinstall Epson SX215 printer driver package.
a. open devices and printers, click the Start button, and then click the start menu, click devices and printers.b. right-click on the printer you want to remove, click on remove the device and then click Yes.
If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes.
Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. now, reinstall the printer . Note: Valid link also for Windows Vista.
Method 3:
If the above didn't help, restore settings PC and install the updates one by one and refrain from installing the update (although not recommended) which is the origin of the problem.
Aziz Nadeem - Microsoft Support
[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Strange problem with RAM on Satellite Pro A100
I have a Satellite Pro A100 (not sure which...)
It came with 2x256mb RAM, which are mounted. I noticed my laptop slow, so I checked what he says on the properties of the workstation - who said RAM 192Mo...Any idea what's going on?
I had a peek inside, both are mounted securely, while the right push entirely? There is a small gap (about 1 / 2mm) so that is the little nick and real editing. -What is the cause? Or it's maybe faulty?Please help me!
Thanks in advance,Diana
According to the description of your problem, I guess one of the memory modules is not recognized by the system and the specified result 192 MB of Ram only tell me that your laptop has shared graphics memory card.
Satellite Pro A100 is fairly new to laptop and, in my opinion, you should contact service. The guarantee must be valid and if everything is defective it will be replaced free of charge.
If possible, tell us what Satellite Pro, you have exactly. This info you can find on the lower side of your laptop.
-
Problem with Youtube after the update of Flash Player (11.9.900.152)
Since I've updated my FPlayer I have problem on Youtube videos...
I have the version 11.9.900.152 - later, but I'm not able to watch videos at all. I installed a previous version, it worked in part, some videos played the others don't. Sets the last of them in again. First on the page to find the Version that I couldn't see anything and then after you have reinstalled several times, it finally shows that I have the latest version. I followed all the steps here http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html nothing works... no luck
What should I do, its me piss off now not only Desktop, but my laptop has the same problem (I didn't know this update is causing this problem so yes I installed it on both - and I do not know what was my old vesion)
same story (2nd paragraph) except the link, provided it works for me
http://forums.Adobe.com/message/5847321#5847321
I have IE/Mozilla/Opera
Win XP Office
Win 7 portable
I did everything that you said, step by step. but still no luck
When I opened that allows Flash Player in Internet Explorer
the video still does not play, but when I open it in Youtube it plays without any problems
-
Problem with appearance after recent updates
I've seen other messages regarding this issue, but I could not fix the problem. Two weeks, there were about 7 updates within several days of each other has changed the appearance of an obsolete and look much older. I noticed that the reboot has been recommended but I am not very informed in this area so could you elaborate please.
Thank you, mimi!
-
Problems with printer after windows updates 14th Dec2011
December 14, 2011, downloaded the windows updates now, I don't see my network printer. I have a mac, a computer laptop xp pro and a win7 pro, mac workstation still sees the printer and it works. Computer laptop xp can't find any, work stations can be found, but it will not print correctly. The printer is a laserjet 1022n, it has the latest firmware and two windows machines have drivers elatest th. Help!
Hello
· Your computer is on a domain network?
Follow the form as follows article and check if that helps.
How to use Windows XP to share a printer with other people on your network
http://TechNet.Microsoft.com/en-us/library/bb457001.aspx
See also:
Cannot print to a network in Microsoft Windows shared printer
-
Strange problem with time of BIOS
Today, I tried to create a new virtual machine and I was wondering why a Windows unattended Setup no longer works. I discovered that this was due to the Kerberos failure as a consequece of time inaccurate system.
Then I boot in the BIOS of VMs and found that the time is one hour on local time and also a time out of time that is displayed in vSphere client for the ESXi host.
It worked perfectly, in the past, there is no need to adjust the time of BIOS after creating a new virtual machine.
No idea why the BIOS of the newly created virtual machine time is an hour off the coast compared to local time?
Thank you.
See you soon.
Time UTC in the BIOS at startup.
-
I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?
In addition, the Console has opened with the same message several times, but I don't know what that means.
Any help would be appreciated.
Hello
The last is a picture of the Terminal window.
Just because it lists 'Console' does not mean that it has nothing to do with this application.
You have not said why or what you're trying to install so I can't help with that.
You can use the activity monitor to leave their.
After you select an item, use the X in a type of stop sign icon and confirm force quit.
21:36 Thursday; September 15, 2016
iMac 2.5 Ghz i5 2011 (El Capitan)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
iPhone and iPad (2) -
seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?
The 'list' of relevant articles that I know, they are now
-You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last
Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous
Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac
If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support
Leave a post by: ChitlinsCC
-
Problems with aero after the latest updates
Hello
Someone had a problem with the latest Microsoft security updates
touching the aero desktop theme.Since I downloaded the updates my aero as a theme stopped working.
I did a roll windows back but I still have the same problems.The updates are #KB971029 and #KB971029 the
updates have been downloaded on 03/17/11I hope someone can help with this problem.
All the best
Philip Davies
Hello
OK try to remove these updates to see if that helps. Sometimes manually
install the updates one at a time will prevent topics such as this one (if the)
mises_a_jour have been the question).Control Panel - Windows Updates - lower left Installed Updates - uninstall or change
Or
Remove an update
http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-updateOr
The problems with the removal of updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-removing-updatesOr
How to uninstall updates in Windows Vista
http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updatesDisable or hide optional updates on Windows Vista
http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/AFTER removal of updates, do a system restore to before
updates have been applied to the origin. Therefore, affect the total amount of
updates are deleted.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
=======================================================If necessary:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html======================================================
If necessary try a repair Installation which allows to keep the programs and data however
redundant backups are always a good idea.You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlI hope this helps.
-
Satellite A500 emit after bios update 1.50
Hey guys and girls,
I have some problems after the update of the bios. Before the update my laptop has been the scene of much smoother and everything was fine and dandy until Tempro told me to update my bios. The problem is that after the update, the temperature seems to be considerably higher as usual when I play the game (I am a gamer) and also all the games I play seems to be much slower than before (lower, gal frame rate). Before the update I could play Dragon Age Origins with 1366 x 768 with 4 x anti-aliasing and the only one that I could get the same performance with the graphic parameter above is on 800 x 600. Now, it is certainly a big problem for someone who is a graphics junkie when it comes to games.
* What do you think I should do? *
A. downgrade my bios for when I bought everything first? (I don't know what version of bios is if anyone knows the stock bios?)
B. perform HARD drive recovery?
C. clean install of Windows 7 64-bit?My laptop computer spec:
Model name: Satellite A500
Part number: PSAR3E-00N005EN
Serial number: X9206227K
OS version: Windows 7 64-bit Home Premium edition
BIOS version: 1.50
Physical memory: 4096MB RAM
Graphics card: NVIDIA Geforce GT 230 MAny help with this is greatly appreciated.
Post edited by: Poyzen
Hi mate
I think you had a version of BIOS 1.30
In older versions of the BIOS update are not available on the Toshiba driver download page. Only ASP (partner) has access to these early BIOS versionsIn any case, I found an interesting thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50577Not sure if it could be useful but check
PS; the graphics card driver update is a good idea it too check
-
No WiFi on S10e after bios update
Hello
I am facing a very strange problem with my S10e. After that I ran the app system update and downloaded bios updates and new bluetooth, wireless networking doesn't seem to work - the computer laptop doesn't overlay any available network, although there are some pretty close.
Any idea?
Hello
little reminder...
after update BIOS did you press F9 in BIOS to the default settings...
Green wireless button is pressed to turn on all wireless
is FN + F5 in menu wireless wlan active... switch OFF BT... Blue has LED to the edge of...
Sometimes it is useful to disable router for a short time...
or reinsert wlan driver...
try to use search in the forum of lenovo to find similar answers on network problems
or look here WLAN Probs
cordially KalvinKlein
------------------------------------------------------------------------------------------------------
You want more? For more information to get the most out of your machine S-Class
Maybe you are looking for
-
Graphics/display problem - Satellite M60-105
I'm having a little problem with the display (or graphics). In some programs of CAD (Inventor, Solid Works) 3D solids are displayed with lines that normally are not displayed. "I see the solid. In the games like Doom3, I see only a chequer (Exchequer
-
IWant to activate my anti-virus, how I can do it.
I want to activate my antivirus. How can I do?
-
Operating system not recognized, can not update windows
I can't update microsoft products, or get online as my operating system has become "unrecognizable." This prevents me to access patches from microsoft online, or get updates. I tried to repair the installation, but that doe not work either. All ot
-
I reinstalled my windows Vista disk now I have a small screen and it cannot set a mode full-screen. I followed the setting display it says its full screen, but it is very small. Can someone help me solve this problem? Windows Vista 32 bit Sony Vaio l
-
Unable to sign applications WebWorks
Hi all I created a Blackberry WebWorks app, which works well in development mode that uses. However, when I try to add to our BES 12 server I get the following message; An error has occurred. The application is not signed correctly and cannot be add