T530 - USB 3.0 acting wacky only works half of the time

Similar Questions

• Tecra Z50 A-h-13 - fan works half of the time

  Hello

  I got a new Tecra Z50 A-h-13 (i5, 8 GB RAM).

  Although the processor is underemployed (approx. 20% of capacity), the fan works half of the time!

  When the fan is running the Toshiba PC Health Monitor shows approximately 44% CPU temp. and 36% system temp.

  When the fan works not the Toshiba PC Health Monitor shows similar values!

  What is it good for?

  In my opinion, the fan is not alone. I have not found a possibility to adjust the speed of the fan (PC Health Monitor always shows 45%) or the starting temperature. The current Version of BIOS is installed.

  Is it possible to get a SMART fan control?

  Best regards

  Zvonko

  Hello

  The manual fan control is very limited.
  What you can do is to change some parameters in the Windows power options.
  Go to the control panel? power options
  Select the power plan you use.
  Then choose Advanced settings.

  In the advanced power settings, you will find the option method Cooing and the performance of the processor.
  I recommend you degrade the performance of the max processor at 90-95% and to change the method of passive cooling (both for the battery and plugged)

• My computer screen only shows half of the content page.

  When you try to play games online, I can only see half of the page.

  Hi chrissy2u42,

  1. this happens with a particular game or all games online?

  2. were you able to play the game before with no problems?

  3. you remember to make changes to the computer before this problem?

  Step 1:

  You can try to change the resolution of the screen and check to see if it helps:

  Change the screen resolution

  Step 2:

  You can also try to update the display drivers and check if it helps:

  Check out the link:

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• HP wireless mouse does not work most of the time

  Original title: problem with my wireless mouse

  I have a problem, my wireless mouse does not work most of the time it's repair turning market sometimes, sometimes resembles
  dead, what is the problem I have the latest driver updates everything was ok, but 3 days ago, when I try to use it I see that it does not work
  now I can't use it, I try to restore my computer but locks is not any point of restoration and I plug a different usb port on the port still does not, for more than 2-3 minutes sometimes work! , look at these pictures when my mouse is not working the red light does not work!

  What should I do I have this mouse for 3 months when I buy with my hp touch desktop

  
  

  Thanks so much, I change my batteries and now works seems once again, the batteries will go fast
  can u help me to fix the error, I'm showing you pictured RunDll

• Is it possible to resize all work plans at the time the way that you used to be able to do in the configuration of document?

  I have a document with 20 work plans. When I resize a that only changes that are. I'm in CS5. Is it possible to resize all work plans at the time the way that you used to be able to do in the configuration of document? Thank you very much!

  Wade_Zimmerman wrote:

  It's a good script but t vrry does not resize some plans of work and not wouldn't

  @ Wade

  You can recode and a confirm in the loop to determine if you want to resize the work plan current in the iteration of the loop, if no installation then jump her, if yes then prompt for sizes and move forward. Then you can resize regardless of those that you wish as such, some and not others. You can even distinguish with each confirm and ask what work targeted plan by displaying its name. I tested this approach and it seems to work ok, but not super stylish, of course, because if you have tons of work plans, it would be a large number of guests/entry. You could lesson prompts by combining the width/height in a single guest. But then again, even at this time sound just as effective to resize each manually via the window of work plans, probably the same amount of work/time user input processing and the targeting of individual work plans. You could perhaps also create script window for multiple entry for plans of work desired, may be based on the selected and build your dialogue window accordingly, I suppose that, at this time, it would provide a more effective approach for this kind of thing that you seem to be describing.

  But that all said that we would be well beyond the original request that CarlosCanto already so generously filled. He might have some comments on your comments.

• Satellite A40: How update the BIOS because I only have half of the Bios

  Hi guys

  I went to the local with my satellite A40 computer store because I only have half of the bios!
  I sent an email to support technique German toshiba and they said to try a bios update (which put bare in mind I still don't know how to do), then we have sent my laptop in a local computer store and told them the problem they do not put me to update the bios on a processor cempron.

  Why not? What are the risks in need to know.

  Please help me because I want to in the future might be upgraded to vista?

  Hello Daniel,.

  I'm a little confused about your message from Mr.
  What do you mean with half of the bios is enough?
  What s wrong with the BIOS?

  The support from Toshiba said-> try a BIOS update.
  On the Toshiba page, you can download the BIOS for Satellite A40.

  It seems you didn't check the download page detailed because on this page you will find this statement:
  IOS http://eu.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?z=234&service=eu&from=faq_selection&CFID=B & FID = TRO0000000b07

  The update of the BIOS has been detailed described in this document and that you follow these guidelines for the update of the BIOS.

  Good bye

• Button to navigate to another page does not not work properly all the time.

  Hello

  I'm just starting to explore the ADF, I use Jdeveloper 12.1.3.0.0 and integrated weblogic server that comes with the IDE.

  I just created a simple application with a welcome page called Main.jsf and then 2 task bounded, streams called SearchStudentsFlow and Studenloansflow, each workflow has a jsf page. The home page has a single button that sends me to the first task flow, SearchStudentsFlow and I can see is the page in that workflow, AwardsSearch.jsf. Also in the AwardsSearch.jsf page I have a button that takes back me to the home page.

  The first problem I have is that when I run the application starting at the home page button in the works of the great homepage the first time, the button send me to the AwardsSearch.jsf , but once I decide to go back to the homepage and then click on the button to go to the first task flow the button does nothing. This happens whenever I decide to return to the home page of any page in my project.

  Also, I copied the entire previous project into a new project and I decided to use the ADF security infrastructure in this new project to create a log in page create users and give them different roles and levels of access.

  I created some users who have access to all pages and all the streams, but when I run the application starts the login page and I login successfully and go to the home page, the button on the home page does not work.

  
  

  I don't know why the button sometimes works, but not of others and also I do not know why when I use the login page, the button doesn't work. I don't know if these 2 problems are related or not.

  
  

  This is my code in the homepage:

  <?xml version='1.0' encoding='UTF-8'?>
  <!DOCTYPE html>
  <f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <af:document title="Main.jsf" id="d1" binding="#{backingBeanScope.backing_Main.d1}">
          <af:form id="f1" binding="#{backingBeanScope.backing_Main.f1}">
              <af:panelGridLayout id="pgl1" binding="#{backingBeanScope.backing_Main.pgl1}">
                  <af:gridRow marginTop="5px" height="20%" id="gr1" binding="#{backingBeanScope.backing_Main.gr1}">
                      <af:gridCell marginStart="5px" width="34%" marginEnd="5px" id="gc1"
                                   binding="#{backingBeanScope.backing_Main.gc1}">
                          <af:image source="/images/NU_Logo_purple.jpg" shortDesc="Northwester University" id="i1"
                                    binding="#{backingBeanScope.backing_Main.i1}"
                                    inlineStyle="width:293px; height:197px;"/>
                      </af:gridCell>
                      <af:gridCell id="gc3" binding="#{backingBeanScope.backing_Main.gc3}" width="33%"/>
                      <af:gridCell id="gc4" binding="#{backingBeanScope.backing_Main.gc4}" width="33%"/>
                  </af:gridRow>
                  <af:gridRow id="gr3" binding="#{backingBeanScope.backing_Main.gr3}" height="10%">
                      <af:gridCell id="gc5" binding="#{backingBeanScope.backing_Main.gc5}"/>
                      <af:gridCell id="gc6" binding="#{backingBeanScope.backing_Main.gc6}">
                          <af:button text="Search Awards" id="b1" binding="#{backingBeanScope.backing_Main.b1}"
                                     action="goSearchAwards"/>
                      </af:gridCell>
                      <af:gridCell id="gc7" binding="#{backingBeanScope.backing_Main.gc7}"/>
                  </af:gridRow>
                  <af:gridRow marginTop="5px" height="70%" marginBottom="5px" id="gr2"
                              binding="#{backingBeanScope.backing_Main.gr2}">
                      <af:gridCell marginStart="5px" width="100%" marginEnd="5px" id="gc2"
                                   binding="#{backingBeanScope.backing_Main.gc2}"/>
                  </af:gridRow>
              </af:panelGridLayout>
          </af:form>
      </af:document>
      <!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_Main-->
  </f:view>
  

  And this is my code in the adfc-config. XML

  <?xml version="1.0" encoding="windows-1252" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <view id="Main">
      <page>/Main.jsf</page>
    </view>
    <task-flow-call id="SearchStudentsFlow">
      <task-flow-reference>
        <document>/WEB-INF/SearchStudentsFlow.xml</document>
        <id>SearchStudentsFlow</id>
      </task-flow-reference>
    </task-flow-call>
    <control-flow-rule id="__3">
      <from-activity-id>Main</from-activity-id>
      <control-flow-case id="__5">
        <from-outcome>goSearchAwards</from-outcome>
        <to-activity-id>SearchStudentsFlow</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <managed-bean id="__4">
      <managed-bean-name>backing_AwardsSearch</managed-bean-name>
      <managed-bean-class>view.backing.AwardsSearch</managed-bean-class>
      <managed-bean-scope>backingBean</managed-bean-scope>
      <!--oracle-jdev-comment:managed-bean-jsp-link:1AwardsSearch.jsf-->
    </managed-bean>
    <managed-bean id="__2">
      <managed-bean-name>backing_Main</managed-bean-name>
      <managed-bean-class>view.backing.Main</managed-bean-class>
      <managed-bean-scope>backingBean</managed-bean-scope>
      <!--oracle-jdev-comment:managed-bean-jsp-link:1Main.jsf-->
    </managed-bean>
  </adfc-config>
  

  No idea why the button does not work correctly all the time?

  Thanks in advance

  Play well!

  Now, we understand the problem and can help you solve it.

  The problem is that you dropped the home page in the flow of student loan and place you thinking that you must return to the point of departure, the unlimited workflow. Actually, you don't the sheet flow loan student but simply see the homepage as part of the loan flow. The navigation rules remain those defined in the flow of student loan. Now, when you click on a button to jump to the stream of research, the target is undefined zed you simply stay on the same page, the home page.

  To make your work use case, you set a return action in the flow of student loan that return to the caller, the flow of research which, in turn, will return to his name the workflow without terminals that hold the homepage. Remove the homepage of flow of charge to students. The case of navigation allows to navigate between the button and the new return action.

  In the adf of flow research a wild-card rule that accesses the return operation sends the return flow to the home page. You must remove the sailing time pointing to research prices for the return operation because it can use the same rule of navigation of wild-card then. Then, you add a Bach student load flow navigation rule to the scholarship search page. This navigation is used for the return actionto_searchStudents.

  Timo

• I installed first Pro CC trial version and found that only about half of the CS6 Pro known in first video transitions are available. That's happened?

  I the trial version Premiere Pro CC installed and found that only nearly half of the Pro CS6 known in first video transitions are available. What happened?

  If you are using Windows several transitions have thrown to make it equal to Mac.

  Adobe Premiere Pro help. Summary of new features

• Comment do pay change the VAT number, even after trying all possibilities to contact you? Car I have to renew my subscription it works like pay the time. If not can I make a new account and keep all my videos

  Comment do pay change the VAT number, even after trying all possibilities to contact you? Car I have to renew my subscription it works like pay the time. If not can I make a new account and keep all my videos are that they do is delete? Thank you!

  Hello Anthony, I just talk to an officer on the support of the cat, its ok for me!

  So to other consumers of the same question:

  Go to this page: https://helpx.adobe.com/contact.html?step=CCSN_membership-account-payment_change-or-upgrad e-tone-subscription

  Then click on the blue button "still need help? Contact us. "

  Then click on the option contact fist > 'Chat '.

  Wait a few seconds and then be cool, ask to change the VAT number and wait... the agent will make the change...

  You will receive an email within 2-3 days to confirm the change (to the used email registration)!

  That's all!

• Will not print, but 1/2 on the firefox page and only see half of the page to print preview, but will be printwhole page of IE and quickbooks.

  When I try to print anything on the Web, only the left part of the page will print, nothing in the middle right of the page display. It presents this when you preview before printing. I tried taking OFF reduced to fit and it still does not show the right half of the page, printing is just bigger.
  I can print anything Internet Explorer and Quickbooks, but not from Firefox. I downloaded all the versions up to 5.0. He did print prior to upgrade, but I don't know which version actually worked.

  See if the troubleshooting steps in this article solve your problem: problems printing web pages.

• My Satellite A100 GPU fan works 100% all the time

  First: I have the Satellite A100-440 with GeForce Go 7300 and XP Professional (and Ubuntu).

  There is something wrong with thermal control. The first PC Wizard has always shown that the temperature of my GPU is "a very large number" and the fan is runnign 100% all the time (the main problem). Then I installed ATItool hoping he would show the temperature correctly. Well, it worked in part. Now when I check the temperature with PC Wizard, it indicates the temperature of the GPU normally (like 30-40 degrees celsius), but it also shows the GPU Diode temperature it's "a very large number" (as 4.294967E + 09 C) and the fan will operate at 100%.

  I tried to control fans with RivaTuner, but nothing happens.

  So if anyone has an idea how I could continue to solve the problem, I would be very grateful. I don't know if the problem is with the hardware (I could take this service) or with the software...

  Thank you!

  Post edited by: Avilja

  Hello

  Why are you talking about 'problem' and 'solve this problem?
  I see no problem!
  First of all I'm not all 3rd party applications that monitor temperatures. I'm not 100% sure if these applications provide a good values.

  However, as far as I know the laptop was shipped with Vista and not XP and Linux. You do not use a factory settings. It seems that you have set up the laptop with new applications and you should know that all the software installed and running insists on the CPU and other parts.

  BIOS fan table supports different temperature and cooling of the speed measurements. This means that if the temperature rises to a higher level, the cooling module starts and tries to decreases the internal temperature.

  Usually the temperature depends on the use of the laptop. If several processes of the OS are running in the background, that the CPU performance are high, the temperature rises and the fans start to run. There is nothing unusual about it.

  Furthermore, the dust and debris inside the laptop might have a bad influence on the laptop cooling. From time to time, it is advisable to clean the cooling modules.

  Last but not least the laptop must be placed free on table to ensure the circulation of air correctly. Don't forget that there is enough free space around the laptop.

  Finally, I must say that one of my friends has an A100 and the fans run correctly.
  This means that the cooling modules works with maximum performance while playing games or using graphics software.
  However fans do not work with maximum performance using only common programs like IE software or office.

  Good bye

• Triggered Cameralink Acquisition only capture half of the executives

  Hi all

  I am aware of this page- http://digital.ni.com/public.nsf/allkb/6FFA526966E2D29386257AA80054730A

  He describes my problem, but I can't find a good solution.

  I have four cameras that should be triggered at the same time (they cannot be free running!)... If I only to trigger the cameras, and allow acquisition cards to run without a trigger, I find myself occasionally lack of executives at increasingly higher rates.  To 100 fps I have lost about 40 percent of the data, but about 50 fps I capture all the data correctly.

  When I trigger both the image grabber cards (1430 years) with cameras, I seem to always miss all the other images.

  I tried to trigger the cameras on a rising edge and the cards on the falling edge, but no matter what I myself only to collect half of the frameworks I expect to collect over a period of time.

  Here is a snippet of code that I use for the acquisition is something urgent?

  

  Thanks for your suggestions!

  -MK

  Triggering the camera still works best, in my opinion.

  You're doing an acquisition in the buffer?  The code you posted looks that you use just Grab, that does not use a buffer.  With an acquisition in the memory buffer and outbreak of the camera, you should not have problems.

  Bruce

• reports on the problems and solutions has stopped working message all the time

  I can't access the control panel reports of problems and solutions and constantly get one - problem reports and solutions has stopped working, message on the screen.

  How can I disable or fix this problem.

  Hi NickMeyer,

  1. have you made a recent software or hardware changes to the system?

  You can check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• BlackBerry smartphone WiFi does not work most of the time

  It's like a broken record, I know, but my WiFi does not (most of the time).  It used to work well, but over time he works less and less! I use v5.0.0.979 (bundle 1607, the 5.1.0.177 platform and a Bold 9700)  I get the Green checkmarks for connections and WiFi and a white WiFi icon options.  If I try to use the browser of BalckBerry he started working in WiFi and I can see the blue WiFi on my router shows the data flow and then everything stops in for WiFi is concerned and after a period of time, it either expires or most likely to connect to the 3G network.  I used to (a 3 or 4 months) work just fine, but now very poor.  I tried another router and has the same problem.  I found no solution in the forum that makes my 9700 working properly.  If I connect to the weather apps Bug or Thomson Reuters. WiFi works great, load fast and I can see the data on my router blink indicating data streams, but whenever I use the BlackBerry browser, it won't work!  Crazy!

  I found the same thing as automatic power switch at night is interfering with connections no matter what I did. So I stopped using it and it works fine now manually turn it off. Not much extra actually works!

• My only of taskbar displays the time. The date is missing. How can I fix?

  Display date and time in my taskbar has changed to display only the time. Is there a way to get it back to normal?

  No, we tried all options of this Properties dialog before asking this question. We have more than one user on this computer desktop and task bar settings are identical, but with different results.

  I was unaware of this from your original post.

  You may have a corrupt user profile.

  See this

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile