T530, what are the sata speeds?

Does anyone know if the slot msata T530 uses sata2 or sata3 speeds?

The same with the main drive Bay and ultrabay slim sata adapter housing. Are these sata2 or sata3?

Manual equipment is unclear. I looked at.

There is no whitelist for mSATA mSATA is SATAII.

Main hard drive and ultrabay = SATAIII

Tags: ThinkPad Notebooks

Similar Questions

  • I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

    I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

    I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

    My last similar attempt on another machine resulted in a very slow computer.

    Thanks, Ron

    Apple says the following:

    General requirements

    • OS X 10.6.8 or later version
    • 2 GB memory
    • 8.8 GB of available storage

    For best performance, I would say not less 4 GB and preferably 8 GB or more.

    Your i5 is well able to support properly.

    http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

  • MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

    MacBook Pro 13 inch mid 2012 model No. A1278. Has he a player SATA or SATA III. What are its write speeds?

    The following is from http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i5-2.5-13-mid-2012-unibody-usb3-specs.html

    In addition, the 6 Gb/s it is SATA III

    Standard hard drive: 500 GB (5400 RPM) Int. HD Interface: Serial ATA (6 Gb/s)
  • What are the speeds of the USB?

    I bought a USB memory key, it's USB 2.0 2GB...
    Can someone tell me why I can't use this Flash DRIVE for ReadyBoost?
    What are the speeds of the USB?
    Kind regards

    Hello

    Can you please tell me how should he know the speed of this USB stick if you n t writing details on this sick USB?
    We are not blind!

    However, I think you know the manufacturing of this USB so why you don t google a bit and you are looking for more information.

  • Linksys E3200 - what are the parameters that I need to change to get the full speed wireless?

    Hello, I never had a router before.

    I just bought Linksys E3200, because I need a wireless connection on my HTPC.

    I only put a password for my network. Don't touch or changed the factory settings.

    My main PC is connected to a router via a network cable,

    my HTPC is wiresly connected using the Linksys EA2500 wireless network card. I had a wireless connection.

    However, my internet speed on my main PC (cable) is COMPLETE and about 50 Mbit/s.

    Wireless on my HTPC is max 10 Mbpsspeed.

    My modem, router, main PC and HTPC are in the same room next to the other.

    What is the problem? What are the setting do you recommend to change?

    Thank you.

    Ensure that networks in the router (5 GHz and 2.4 GHz) have unique names on the other. This way you will know what network the HTPC is connected to. After making sure that the two networks have unique names, change the channel to the network of 2,4 GHz. try 1, 3, 6 or 9.

  • What are the best "bang for buck" upgrades for my MSI m/brd?

    Hello to you all,.

    This is post multi-question, my apologies if it is not consistent with the Protocol of this forum, I thought that it would be wiser, that post 3 different questions related to this topic. Hope somebody smarter that I can enlighten my brain electronically challenged!

    Desktop HP My p6320y came w/a updated motherboard MSI 785GM-E51 (FX) military class II. There w/4 DDR3 DIMM slots. According to the manual, I can use "dual-channel" mode What are the advantages and disadvantages between DDR2 and DDR3, & single or double channel?
    Right now, he has two modules of 4 GB memory installed in the first 2 slots (DIMMS 1 and 2)
    The manual States certainly not for Exchange DDR2 & DDR3.  So, if I want to max out my ram, & run it in dual channel mode. I need to complete all 4 slots w/4 GB DDR3 DIMMs for a total = 16 GB of RAM.
    Would execute my M/consultant w/16 GB max. two-channel mode. RAM has make my system perform significantly more fast/visibly better? Or I could use the cost of the 2 memory modules xtra in a different way to give me a clearly observable bump in performance?
    So that had him drive performance, would upgrading my current CPU (phenom quad core AM3 2.7 Ghz) to something more 3.0 Ghz, be worth the effort & produce an observable speed bump?  Or do the two would be too much to kill the M/Board of potential?
    Finally, the manual explains how overclock my FSB in 3 steps: 10%, 15%, 20%. Is this really a Hi-risk for ovr. / CLK. compared to the increase gained? Even on the low setting - 10%? Would be an additional fan counter the rise of heat, which allows a full life?

    Thank you very much for any advice, Alan

    My preference is a Samsung 840 Pro series SSD. I went from Windows from my hard drive to SSD with EaseUS Todo Backup ver 5.5 'Home' edition (Home supports cloning) which is what you need to do, in addition to your SATA I hope is set to AHCI and IDE mode AHCI is required to support the 'Trim' that all need units SSD to truly free disk space when a file is deleted.

    It was modified a Hervé 65, air, fuel injected, forced exhaust headers, great FI pistons, to the special slippers and cam, suspension, shock absorbers and transmission.

    J W Stuart: http://www.pagestart.com

  • I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

    I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

    Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

    You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

  • Re: What are the properties of the SSD used in Tecra R10

    Hello

    Does anyone know what are the features of the ssd drive?
    128GB but what manufacturer? I need all the features of the SSD for the Tecra R10.

    Thanks for your help ;)

    Hello

    I have found these details:
    The SSD drive that was installed in the Tecra R10 - 10J is a
    -128 GB SSD
    -10 MB buffer size
    -SATA interface
    -Size (mm) 9.5 mm
    -Weight 66g (Max)

    That s all I can say about this SSD hard drive

  • What are the effects of the clearing the browser Cache?

    What are the effects of the clearing the browser Cache?

    Caches to store a copy of the page Web that you visit to speed up the loading of the page even when you revisit the page.

    Once you empty the Caches, pages must be again downloaded from Web sites.

    With higher bandwidth available now, is not a problem.

    Sometimes these caches can get damaged and a troubleshooting step

    You can clear those without causing any problems.

  • What is the highest speed of RAM I can install in my DV6-3112sa?

    What is the highest speed of RAM I can install in my DV6-3112sa? The factory installed is RAM PC3-10700 (1333) installed.

    I'm looking to upgrade to PC3-12800 (1600). Will this work?

    Although you are to install PC3-12800 (1600), it is unlikely that you will see gains preformance. All modules in memory system associated with this Intel card base system are listed by HP as DDR3 PC3-10600 1333 MHz.  HP dv6 PC Maintenance and Service of Guide

    Frank

  • What are the minimum services required for a windows7 home premium system runs completely independent

    My better half is not in computer science and has no desire to become. I have too many movies and want to set up my HTPC as a giant DVD player only. I load movies and play movies.

    What are the absolute minimum services required for windows 7 to run (and stop telling me that's not authentic) to run the 2 tasks only Media player and an extraction program and absolutely positively nothing else
    no firewall, antivirus, network, internet, encryption, indexing, etc... required.

    Thank you

    Hello

    See this link that shows how to turn off services in Windows 7.

    http://www.SevenForums.com/tutorials/2495-services-start-disable.html

    http://www.techknowl.com/2009/03/disable-unwanted-services-and-speed-up.html

    It will be useful.

  • What are the programs should run at startup

    Paltalk I still have started from. went to windows to resolve problems by saying that I owe a lot running at startup

    Hello

    These methods allow to check what you have running at startup and use only those you need. Many
    programs will load in a start-up but really they do not need to be loaded automatically
    to work properly.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or
    Windows 7
    http://support.Microsoft.com/kb/929135

    Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

    Use advanced tools to solve performance problems in Windows 7 http://www.howtogeek.com/howto/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-windows-7/

    Problems with the overall speed of the system and performance
    http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what are the files, registry keys and other objects processes have
    Open, which DLLs they have loaded and more. This exceptionally effective utility will show same
    you who owns each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured so that it starts automatically when your system
    boots and you login. Autoruns shows you the full list of registry and file locations where
    applications can configure Auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity in
    in real time.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
    automatically when Windows starts. For each request, the following information
    appears: product Type of startup (registry/Startup folder), Command - Line String,
    Name, file Version, company name, location in the registry or the file system and more.
    It allows you to easily disable or remove unwanted programs that run in your Windows
    startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The
    Window Watcher says it all, reporting of any window created by running programs, if
    the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • What are the benefits (if any) of transcoding to an intermediate editing for post production format?

    I have searched for an answer final to this day and impossible to get something useful.

    My recordings to the AVCHD format that is 24mbps H.264 video and audio camera (I record audio separately so audio is not a cause for concern). I use the following Adobe CC on Windows. I do a lot of green screen work.

    I read on many intermediate codecs designed for video editing. Include DNxHD of Avid, Apple ProRes, Cineform of GoPro, MXF OP1a, among others. As I understand it, these formats offer excellent features help video publishers to do their work.

    I was able to edit files directly AVCHD with Premiere Pro and after affects.

    My question is, what are the benefits, if any, I'd get if I converted my content from AVCHD to one of the intermediate formats before as I have start to change? It would speed up Adobe software? It would provide the best quality in the end? It would make various effects function better?

    Ultimately, all the videos I do will be encoded in the format h.264 for web distribution.

    Please note: I am not asking the workflow easier or more obvious (which is just to work with AVCHD files directly). I want to know if I can gain advantages in transcoding in another format before I in post-production and that these benefits are specifically for each of the different intermediate codecs.

    Thank you.

    Well, every format has its own advantages and disadvantages. Higher end codecs tend to be very large and take much more space, but behave better when apply effects or greenscreen work.

    However, you cannot really improve the quality that comes from your camera, it is an indispensable part of the workflow. You CAN transcode to, say, ProRes HQ and get better results with your fx work, but it will be as good as something turned on a higher end camera.

    Maybe do some tests on a small piece of video. Transcode into several codecs and do exactly the same treatment to all clips, including your original. Then compare them and see if the improvement is worth your time and additional hard drive space.

  • How and what are the steps we should take to WFERROR trap notifications?

    In applications of R12.

    How and what are the steps we should take to WFERROR trap notifications?

    Please see these documents.

    How to purge WFERROR (System: error) the elements of workflow? [804622.1 ID]
    How to remove the list of tasks [ID 357904.1] error Notifications
    Speed up and purge Workflow [ID 132254.1]
    A further review of the competitive program Purge Workflow Runtime obsolΦtes [337923.1 ID]
    The SYSADMIN user gets thousands of Notifications WFERROR [ID 1299167.1]

    In addition, please see old threads that deal with the same subject - http://forums.oracle.com/forums/search.jspa?threadID=&q=Purge+AND+Workflow+AND+Error&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

    Thank you
    Hussein

  • What are the elements appear on the screen of the ATV 4

    What are the elements appear on the screen of the Apple TV4

    Initially just the settings and a few applications for iTunes movies, music, TV shows etc, then this is all the apps that you download from the store.

Maybe you are looking for