T5i Autofocus viewfinder seems to be turned off

Similar Questions

• It seems to me turning off my touchpad on my Satellite C

  Hi I have seem to have disabled my touch pad - reflected on the control, but it is not clear where the power switch for this option. Hope someone can help please.

  I put t know which laptop model you have and what OS do you use, but a F a option to toggle the touchpad buttons.

  Check it out.

• all the addons seem to be turned off and I can not install new modules either.

  None of my modules seem to work although when I look at my list of Add-ons, they are activated. In addition, I'm unable to install a new add-on.

  This has happened

  Each time Firefox opened

  is yesterday after Firefox update

  I found this solution and it worked:

  https://support.Mozilla.com/en-us/Forum/1/325638?s=Add-ons+not+working & As = s

• HP 15-r011na: laptop turns off when it is attached cable ca

  Hi, I recently picked up the upgrade of Windows 10 and since then have had problems with the laptop switching power, do not know if it is related to Windows 10 but seems a coincidence!  When I got close I use the power on the screen completely closes the button and the laptop.  When I turn it on it's ok, if I have the AC cable disconnected (i.e. using battery power) but if I have the AC cable the screen goes off, but then goes black and seems to have turned off again, and I have to press the power button to put on the.  Also, if I connect the cable so that the laptop is on it goes black immediately, and if I delete it the screen comes alive again.  Can someone tell me what's going on that I have no idea about these things, and it makes me absolutely crazy!  I would really appreciate some advice please.

  Hi @Greenjack67 ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop 15-r011na HP TouchSmart and the laptop turns off when it is attached cable ca. Here is a link to test and calibrate your battery for Windows 10.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Plug the power supply directly into a different wall outlet. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  Here is a document that shows how update the drivers that do not work correctly with Windows 10.

  I hope this helps.

  Thank you.

• monitor turns off not by the switch at the top. power cord seems loose at the back of the monitor. just need a

  I have a hp w2338h monitor, running Windows 7 and I am unable to turn off the monitor through the top switch. The power cord seems loose in its connection to the monitor. Do I just a new cord or something else is necessary?

  Thank you.

  Hello

  Try to push the power cord firmly upward.  It should not move when it is completely inserted.

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

• Satellite P30 seems to completely charge the battery only when the unit is turned off completely

  Hi, I have my Toshiba Satellite p30 and only works on battery. This unit operate on sector or only on the battery as after the period of time go down the warning, then closes. The orange light fades in and out, but seems that it will only fully charge when the unit is turned off completely.

  I only just received this unit so bit of a novice.

  MASH

  Hello

  normally, the battery should always charge until it is full when the power is connected.
  If you have an orange light flashes, it means that something is wrong. Maybe your battery is faulty or something else. This should be checked by a technician.

  Good bye

• Canon t5i lcd turns off after taking pictures

  I just got my Canon T5i... I noticed that the LCD screen turns off sometimes after taking photos or videos. I don't know why... I did not press the "info" button and it will not turn back even if I press the shutter button to halfway... I know that the camera is still on though because if I press on the screen it will take a picture and this picture is stored on the card (after that I turned off the camera completely and wait a few minutes and turn it back on)...

  When the LCD is turned off, I can't get it on... I will touch the screen and try to press the display button to see photos, but it will start...

  and Yes, I disabled the auto lcd off etc...

  Here is a little video I made sure to show you what I saw. http://www.YouTube.com/watch?v=TroZa5xLduM

  Should I have a defective camera?

  I noticed in the video that she has Lieview, take a picture and then the picture does not appear, and there is more no Liveview display.  She then press the Liveview button and nothing happens. There's no other option I can think of that allows you to turn off the LCD screen back when you're in Liveview. That tells me that the device is defective.

• My LCD and viewfinder keep turn off when I turn my Rebel T3i, vertically. Why?

  My LCD and viewfinder turn off / go black (camera stays of less) when I turn my Rebel T3i, vertically. Why?

  You're wearing Polarized Sunglasses.  Remove them.

  Edit: Or not.  I just noticed you mentioned the viewfinder too?  That makes no sense.  It goes completely black?

• Oficejet Pro 8600 Plus seems to disconnect and docs does not print unless it is turned off then

  I have a Dell with Windows 7 dekstop. The HP Officejet Pro 8600 Plus is connected wireless and worked well during the past year. The only change of note is that an old belkin wireless router died and was replaced by a new Belkin wireless router which seems to work very well. My Office recognizes the printer and my printer recognizes the router on my desktop

  The problem is that it seems my 8600 turns standby or offline after a certain period of time of inactivity and when print jobs are sent to the printer either by OIOS or by different laptops in the House, nothing prints. My desktop printer that actually tell me job is printing... then it says error, printer offline. However, printer is on and says that it has strong wireless internet at any time

  A single difficulty has been to put off the printer (via button on / off) turn it and then turn it back on and saved then print print jobs. In addition, the new print jobs launched fly right by fine. Then the next day, the problem repeats

  I just unplug printer a surge protector and moved to a wall outlet directly by something else that I read. I use kapersky security system causing no problem before the beginning of the question.

  I have disabled the option to turn on printer for some time and stop at another time to remove this as a cause.

  Dell and Belkin two saying its a HP problem since the printing run after the printer out of power, and then power on, but I am running out of ideas to try to stop.

  Bill O'Connor

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  1. define a static in the printer IP address (click here) out of the DHCP of the router Beach (check your manual).

  It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this

  first of all if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).

  2. check the printer "Auto Off" is disabled.  Use the built-in webserver (EWS) by going in the

  the printers IP address in your browser's address bar, click Settings tab/Auto Off. Or use the printer

  Assistant, printer Home Page (EWS).

  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.

  4. If necessary and you have assigned a static IP address, try using 8.8.8.8 for the preferred DNS server and

  8.8.4.4 at the level of the auxiliary DNS server.

  In the router: (refer to the manual of your router for more information)

  5. use a wireless channel fixed as 1, 6 or 11, never 'auto', try channel 1 first then the rest.

  6 choose the router to 20 Mhz only, or 145Mbps router function.

  7. always use WPA2-AES encryption (personal), but you can try the "mixed" mode

  8 disable the WPS and never use it and disable the UPnP for the security of routers. No one can hack into your

  now the system and helps with wireless connectivity (if you want to know why, research on the web).

  9. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure you the SSID is NOT the same.

  they must be different for all the bands, even for networks without comments.

  10 broadcast SSID must be enabled.

  11. save all settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.

  12 turn on the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

• Bluescreen error: bccode 116; computer turns off on the reboot screen everything seems fine.

  Original title: while using the computer turns off on the reboot screen, everything seems fine. received message the last time. Signature of the problem: any suggestions?

  While using the computer turns off on the reboot screen, everything seems fine. received message the last time.

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               116

  BCP1:                                                    863A52A0

  BCP2:                                                    8DC1C152

  BCP3:                                                    C000009A

  BCP4:                                                    00000004

  OS version: 6_0_6002

  Service Pack: 2_0

  Product:                                               768_1

  any suggestions?

  Hello

  Try the procedure described in the following article.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly?

  http://support.Microsoft.com/kb/958233

  In addition, update the drivers for graphics cards and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• How can I turn off text to speech that I turned it on to listen to the voice and now there seems to be no way to turn it off

  Original title: speech synthesis

  How can I turn off text to speech that I turned it on to listen to the voice and now there seems to be no way to turn it off

  Hello

  Follow the steps below to disable text to speech in Windows Vista.

  (a) go to the section on your main screen where you see the time displayed.

  (b) it is called the "bar", all kinds of small icons are visible here, there's even a gadget of the small arrow that would normally point to the right if you have a lot of programmes to help you use windows.

  (c) "left click on"the small arrow in a circle - this will expand the list to display small icons, drip slowly mouse over the bar of 'system' in order to launch a pop - up of each icon, once you reach the icon that says something like "text to speech tool","make a clique right".

  (d) a pop-up list appears showing what options are available - option whatever go to "Properties" or "settings", "click on" this element gives.

  (e) a new Panel will appear - in select here the article that says something like "launch on startup", it should have a box next to it, that will be ticked or marked in some way - "click" this element so that it seems to be clear and followed by the button "apply" "click" the button "OK" - which should solve your problem.

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tell-me-what-you-want-A-Beginners-Guide-to-Windows-speech-recognition

   

• LifeCam Permenently 5001HD turn off the autofocus

  Hi, I recently bought a webcam of 5001HD lifecam which I use an image, follow-up of project. I am aware that you can disable the "autofocus" function by using the application of the lifecam, but when the camera is disconnected or the power is off the autofocus light when the webcam is reconnected. I was wondering is it possible to disable continuous auto focus using regedit or can be uninstalled from a command prompt or a command shell. Any help would be appreciated.

  Concerning

  Alan

  Hello

  To turn off the autofocus, you should disable the function Trucolor. To do so follow the steps below.

  (a) open Microsoft LifeCam

  (b) click on the arrow to the right of the camera image to open the Microsoft Dashboard

  (c) click the settings button in the upper part

  (d) under Image adjustments UNCHECK trucolor

  (e) there will be a new button (properties), you can press as trucolor. Click on the properties button and a new window will open.

  (f) click the camera control and clear the check BOX update.

  (g) now you can focus the camera manually by moving the bar left and right

  Use this procedure to disable the auto focus and you will have an option for manual focus.

  You can also post your question on the link below more support fr.
  http://support.Microsoft.com/hardware#tab1

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lightroom: Sync has been turned off. This seems to be a backup catalog...

  Lightroom crashed on me and now I get the following message is displayed:

  Sync has been turned off. This seems to be a backup catalog that can be updated with Lightroom Mobile.

  To ensure that your catalog sync, go to: Edit > Preferences > Mobile with Lightroom and click the button "delete all data" to start over.

  I'm in my main catalog, not a backup.

  No one knows how to stop Lightroom to my main catalog as a backup? I don't really want to delete all data and spend the next week re - synchronize their brand-new.

  I use the latest version of Lightroom CC on a pc Windows 10.

  Thanks for your replies. Looks like I fixed it now.

  I was in the main catalog, not a return to the top.

  The issue seems to be with 1 private collection. No synchronization this collection, Lightroom is connected to the Mobile with Lightroom. I allowed him to delete the files in the cloud, then re - synchronize the collection. It seems to work fine now.

• Edition of Lightroom Mobile Sync - 'Sync has been turned off. This seems to be a backup catalog... »

  Hi, I just tried to synchronize. I am logged on LR5.4 and on mobile. I ran the sync once, that seemed to work. The next time that I'm connected, I got a dialog box saying "Sync has been turned off. This seems to be a backup catalog that can be updated with Lightroom mobile. "To do this, your catalog sync go in Edition > Preferences > mobile Lightroom and click on the button Delete all data.

  It is not a backup catalog, is my main and one alone, but I deleted all the data anyway. No difference. When I start the synchronization immediately made up the dialog.

  Any ideas?

  See you soon,.

  Scott

  Scott, you mention in your post "the next time I logged in." do you have explicitly signed out of sync Lightroom Mobile on the desktop after you sync the first time?  Or you might need to reconnect on the launch.  If it's the latter, this should not occur and could be another indication that the catalog you have signed forward is not the same (that is a backup or a copy that is not state same you were when you last signed in).  This catalog is shared between both machines somehow?

  If you see this and you are certainly not in a backup catalog, you should be able to perform the following operations with Lightroom close.  This will work better if you did remove all the data, even if it is not mandatory.  If you do not, after relaunch of Lr, we will rebuild your sync status which can take some time depending on how much you have synced.  I wouldn't do this for any other situation.

  On OSX: In the Finder go /Users/Data / Sync.lrdata Library/Caches/Adobe/Lightroom/Sync and delete it.

  Windows: In explore go to C:\Users\\AppData\Local\Adobe\Lightroom\Caches\Sync.lrdata and delete it

• my personal hotspot will not die. How can I fix it? I have turn off in settings over and over again. I turned off the phone and rebooted. I changed my password hotspot. nothing seems to fix this problem

  my iphone 6 starts to turn itself automatically more and more. restart the phone did not help; change the password did not help; l ' turn off works for only a few seconds, then it turns itself back on. any suggestion would be appreciated. Thank you

  Check here > share your Internet connection with Personal Hotspot - Apple Support