T60 will not identify new 2 GB Dimm

Similar Questions

• MacBook pro 2012 will not identify new SSD

  I just bought a macbook pro of 2012 and have used it for two weeks without flaws with my 250 GB samsung SSD drive. Now I tried to update the size and bought myself a Corsair Force THE 480 GB to use as the primary drive. I plugged it in, but the mac does not recognize the drive. So I formatted with another mac and tried again. Still no luck. Tried the old drive. No luck with that one or the other. So I knew the data cable from being broken. But when I plug a normal HARD disk it recognizes when in the main location. So the question is, what is the problem with the mac? I don't understand.

  And help will be greatly appreciated

  happyandconfused wrote:

  I plug a regular HDD when it recognizes in the main location.

  What is a HDD or SSD Samsung rotation?

  Have you plugged the SSD (both) external via USB and will the boot the MBP?

  When you have the SSD inside, can I none, one or two boot the MBP?

  Ciao.

• My acer aspire one will not identify new advanced 5G wifi modem. How can I fix it

  The machine of love but just discovered he can't communicate with new advanced5G wireless modem without ethernet cable. Is - fixable? I know this is an older machine but is ideal for travel. I would also like to load windows 10 when they are available for this machine. Help?

  dlomore,

  You must install a new wireless card that supports this connection of 5G, it is not a limitation of the software, in this case.

• T61p will not identify new SATA drive

  Hello

  I recently bought a drive Seagate Momentus 7200 RPM 320 Gig - http://www.seagate.com/docs/pdf/datasheet/disc/ds_momentus_7200_3.pdf (on sale at Best Buy for $99 - who could resist that?)

  If the disc in the drive Bay, it works perfectly - Vista sees the complete concert 320 and it works without a doubt faster than my main 5400 RPM 160 Gig of support. However, if I install the drive as primary, the laptop does not start at all - the BIOS does not see the drive. I checked in the BIOS - the only SATA setting I have is to toggle between 'AHCI' and 'Compatibility Mode' and in each framework, I get the same result - the BIOS does not recognize the drive.

  Model T61p - 6459-CTO

  Vista Ultimate 32 bit

  Latest available BIOS and system drivers installed

  Any help would be appreciated.

  emotivecto wrote:

  However, if I install the drive as primary, the laptop does not start at all - the BIOS does not see the drive.

  What exactly you are doing when you are installing the drive as primary?

  The symptoms you describe seem to indicate that the disk is not docked in the Bay.

  See you soon,.

  Bill

• Satellite A135-S2356 - BIOS will not identify SATA hard

  Hello everyone, hope you can help out me.

  Got a Satellite A135-2356 opportunity, everything seems fine but BIOS will not identify SATA HDD, shows no disk BIOS downgraded to 1.30, not good, upgraded to 1.40, not good. BIOS has no change/test/detection of HDD/SATA settings options. Tested the drive in another laptop and it reads very well. Received the Toshiba (Vista Basic 32) recovery CD, but given that the BIOS will not read the disk, can't do anything. Cleaned contacts, not good. This HARD disk must be too large, or something for the Board of Directors.

  * Hitachi HTS541612J9SA00 120 GB SATA, 5400 RPM *.

  Thanks for the help!

  Hello Richie

  To be honest, I do not think the disc is too big for your laptop. I can imagine that your laptop can handle with drives of 160 GB too. Unfortunately there is no public document on the possibilities of HARD drive upgrade. I can imagine that ASP in your country has information about such things.

  It's also quite strange that HDD is not recognized correctly. Long ago, I had the same problem. Every time when I used F12 at startup disk HARD were not as boot device. Solution in my case was to upgrade the BIOS to the default settings. I believe that your BIOS has already the default settings, but try to do it again.

• HP Photosmart Prem 310a went offline suddenly and will not identify the SSID to run the Network Setup Wizard.

  All of a sudden the printer has gone offline a few days ago.  Went through all the diagnostics, etc. but nothing fixed.  A solution-Assistant will not work cause it will not identify the SSID of the network that he has done since it was installed (long ago).  Have tried everything I can find online, unless I don't understand or is not quite apply and still nothing.  Wireless network works with everything except the printer. I am not very computer so I do not understand most of the letter & numbers abbreviations used here.  Help.

  It may be a heat problem - radio from the printer gets flakey when it's hot.

  Finding 5 wireless networks should - Yes you have one, but your neighbors also have.

• update of the player will not accept new password to install - no installation to change?

  update of the player will not accept new password to install - no installation to change?

  Thank you all sorted! my mistake

• T60 will not boot receive the beep code 1-3-4-3 any suggestions on what this might be?

  Hi guys,.

  My T60, does not start all of a sudden. I can't access the BIOS. I received the following beep sequence: 1-3-4-3.

  I looked around and got as a message for phoenix BIOS beep code 'Test 512 K base memory '. Anyone has an explanation, and I should do or change?

  Thanks a lot for your support!

  Antoine

  I don't have one of them, but if it's a mistake of memory, the best way to test is to substitute known good memory. If you have two SODIMM modules installed, remove them and install one at the time and the test.

  Sometimes remove and reset of memory are sufficient to solve the problem.

  If this does not help, a good 'generic' method that I use on all laptops with a no boot situation is to remove all the drives and cards, then see if it will boot to the BIOS, or post at all. I've seen poor readers force a system not to post, so remove everything that is not required will be an easy way to identify the cause. Usually, if it will not always display, you'll have a system board failure.

• Windows Update - Outlook Express will not download new email after the last update

  After you have installed the latest update of Windows XP files (KB972270; KB977840; KB955759; KB890830) and my OUtlook Express will not download my new messages. Error message occurs sating that a file is possibly corrupted and use Scandisk to repair. This has happened on my computer and my wife using the same basic configuration. Could not resolve the problem before doing a system restore to a previous Restore Point before the update of Windows. So my Windows Updater is no longer needed.

  After you have installed the latest update of Windows XP files (KB972270; KB977840; KB955759; KB890830) and my OUtlook Express will not download my new messages. Error message occurs sating that a file is maybe damaged...

  Display error message (verbatim) complete (e.g., default mail client is not properly installed).

  If you use Outlook Express as the default mail Client, why same Outlook there?

  Microsoft Outlook 2003 updates [for example, KB977840] change default mail manager in Microsoft Outlook
  http://www.oehelp.com/OETips.aspx#13
  Related: http://support.microsoft.com/kb/933450 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Clipboard (Win 7) is "full" and will not copy new data

  My Clipboard (Win 7) seems to have "full" and will accept no new data. He sticks the previous element rather than a new one. Restart it cleared, but it's a pain. Regardless of what I copy to-laptop, Notepad, Word, etc. I read in a manual way to clear the Clipboard, but it should not be necessary. Also read a MS patch 'emptyclipboardtoset', but do not know how to find and download it. Thank you for your help.

  Hello

  The question you posted would be better suited in the MSDN forums. Send the query in the link for assistance.

  http://social.msdn.Microsoft.com/forums/en-us/perfmon/threads

  Hope that helps.

• BlackBerry 8350i smartphones will not save new contacts

  Hi, I'm new to this site so patient with me. I have a blackberry 8350i and recently, I noticed that I can not save new contacts or numbers, how can this be corrected?

  IF you have improved last week your MSN/Live, AIM, Gtalk or Yahoo Messenger application, remove applications for upgrading your device.
  Your address book will not work.

• BlackBerry Smartphones will not display new message indicator

  My turn is receive emails again but not showing is not the new red message flag.  What should I do to correct this setting?

  PeterH wrote:

  Yes.  I myself sent to my gmail account.

  Because of reconciliation 'read' about the new features in BIS, which will not be recognized as a new message, but a message already "read" and does not trigger the new message indicator.

• HP a1630n will not read new SanDisk UltraII 4 GB SD card

  My memory card reader will not read my new card, SanDisk Ultra II 4 GB cards memory 15 MB/s.  I have 4 cards.  I have reformatted all 4 in my camera and they work fine.  When I insert into the card reader, I get a "Please insert card into the drive H:" pop up.  I used the same procedure with my old card SanDisk Ultra II 1 GB card and there is no problem with him.

  I need to update my drivers to read the fastest memory card?

  Model: a1630a

  Product: RC658AA-ABA

  Build software: 64NAemMPA4

  Thank you.

  Hello

  Many readers of cards have been created before the SDHC technology became available and are not able to work with the new format. For example, a memory card reader that was made in 2002 is capable of reading a card Secure Digital (SD) 1 GB, but can not read a 4 GB card.

  Please note that the card drivers memory are installed automatically by the operating system.

  To use your card memory of higher capacity without blocking the computer, do one of the following:

  If you use the card in a camera or another device, you can connect the device to the computer via a USB or FireWire cable. When connected, most devices appear as a removable drive in Windows and can be used in the same way as the card reader.
  Buy a USB memory card reading device that plugs into any free USB port. Make sure that the USB device is able to read the SDHC. These devices are fairly inexpensive and can be used in any computer equipped with a USB port.

• Elements 7 will not download new 5dmarkII RAW files?

  Got the new camera for Christmas 5dmark II, elements 7 will not download the jpegs fine, but don't import of raw files. My 40 d will download two files JPEG and raw without problem (did it for years). need help I can get. Thank you

  Adobe fixed the download link for ACR 5.6 a day or two there - I just checked and it still works:

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=4626

• laptop will not allow new hard drive

  Laptop HP 2000-2b19WM will not again take hard drive, no parameters in Bios to allow to change the SATA or IDE drives I activated the legacy... support any help would be appreciated...

  OK, that makes sense. Starting with Windows 8 key Code is built into the BIOS. If you could get an OEM of Windows 8 drive you can install it and it just works (activate) without needing a key Code.

  And if she has had 10 Windows activated on this subject, you can reinstall Windows own 10 and it will activate only as soon as it is connected to the internet.