T60p - clean the fan and now is noiser

Similar Questions

• How to clean the fan and other components?

  Pavilion 1201tx g6.

  The ideal temperature for my g6 are as follows:

  

  Is it normal when the ambient temperature is ~ 28 degrees Celcius? (Location: Mumbai, India).

  Should I clean the fan and other components by disassembling g6?
  Please give me some official guide PDF or videos.
  My laptop is out of warranty. Technician of cleaned HP laptop and applied thermal paste 9 months ago.

  Please help, very important.

  
  ____________________________
  | Please hit Kudos, if I help you! |
  | |
  | WILL |
  |___________________________|

  Hello

  Please see the following article:

  http://www.PCWorld.com/article/2021499/how-to-clean-your-laptops-cooling-fans.html

  and video:

  http://www.YouTube.com/watch?v=0yyEVSkz_0M

  And the next book shows you how to open and close the machine:

  http://h10032.www1.HP.com/CTG/manual/c02770249.PDF

  Kind regards.

• Acer Aspire not start after cleaning the fan and re - paste.

  I need help, I cleaned up my Aspire 5750 was dust accumulated during the last 3 years, I dismounted, clean the fan, re-glued the CPU and put everything back carefully, when I turned on it, the rotations of the fan for a while, then turns off, gets battery (change from orange to blue) but black screen only. What is the fried MB? Please give me some help here.

  I have checked the connections, changed the battery CMOS, tried pressing the power button / stop without the battery and the network for 20 sec.

  Thanks in advance.

  Ironfly. thanks for the suggestion, but I solved the problem by inserting a small file of Scotch (2mm thick) between Mo and the top cover, I got the idea from another post of member's (royrempel) in another thread in this forum found here:http://community.acer.com/t5/Notebooks-Netbooks/Acer-Aspire-5552G-power-light-but-only-a-black-scree...

  Thanks for the reply, it is still very useful when we panic and start looking for a new MB

• Satellite P30: How to clean the fan and cooling modules

  has obtained a heating issue. Read on another thread just disassemble and clean has solved the problem.

  I tried to disassemble the laptop, but found that it does not come off as it was always held in place.

  Can someone give me a step by step guide to access the fan / CPU / motherboard

  Thank you very much

  Chris

  Hi Chris,

  The instructions in the following link should help you :)

  http://www.irisvista.com/tech/laptops/ToshibaP30/SatelliteP30_disassemble_laptop_1.htm

  Kind regards

• How to clean the fan and vents on a HP dv7?

  How can I go safely on the cleaning of the cover and the fan on my HP dv7?

  Hello:

  What I do is first remove the battery and the power of a/c laptop computer.

  Then I put a toothpick in the air intake fan and place it between the 2 fan blades to prevent the horror when I spray the bomb of compressed air in the ventilation Grill.

  You never want overspin fan as it can ruin the bearings.

  Then I spray the air through the vent system. In other words, I do first the fan, then through the exhaust pipe, then I do it once more each way.

  If you can stand the laptop safely until at its end which would be the best that do not allow liquid to spray out. Waving the can in one position other that simple can cause liquid to come out instead of air.

  Paul

• Clean the computer and now there is a missing file...

  We had a computer with no space on the disk, so we uninstalled programs

  (the right way: with the control panel of Windows itself).

  Now, whenever we start the computer, an error message is displayed:

  

  "There is a problem when starting C:\PROGRA~2\B5A8FEF3.cpp

  Cannot find the module. »

  Is it possible to find which program generates this error message?

  We have uninstalled all applications are:

  SketchUp 7 & 8

  Google earth

  Last vestige

  Ravensword

  Zapper

  Pando media booster

  Silverlight

  Codec K-light Pack

  But none of them has been started with the computer. (except perhaps Pando).

  Our thinking is that an uninstall program did remove a file that is used by another program.

  So is it possible to track down the program that generates this message?

  Thanks for the suggestions.

  However, after some time, we found it.

  As we cleaned this computer, we have been a Troyan horse. Our Virus Scanner that delete, but remained a startup item in the start/start menu. And because the Virus has been removed, this link couldn't find that program and produces this error each time the computer starts.

  Remove the link in start start solved :)

• Satellite A10 - problem of the fan and processor speed

  Hello

  Recently, my computer stops and overheated while clunked there fan who told me that I had to clean the fan and the heat sink. I have it done, replaced everything and then turned back on my computer. The fan seems fine now except that it only lights up for about a second and a half and then cuts off. While the computer on, it is not overheating but the fan just trying her continue again and again and again and turns off after a second or two. I think to compensate, the computer is running only a percentage of its capacity because on top the fan doesn't work does not correctly, the computer is running about 50 percent more slow it was 10 seconds before it overheated.

  When I replaced the fan, I noticed that the card that turns the fan was wobbly, which would have something to do with it?

  Assistance, alternatives or insight would be extremely appreciated.

  Best regards, Niko

  Hi mate,

  In your case, it could be that the fan cable to the motherboard could be defective. Thus, you´ve has already removed it, just so it again, remove the fan and check if the cables and connectors are OK.

  If the fan or the cable is damaged, then replace the fan. IMHO the bearings could be faulty too, so it's another reason to replace this fan (and the fan is really NOT very expensive)

  If you need some parts, google for or ask an authorized parts service center:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome them

• Satellite A200-13R - black screen after cleaning the fan

  Model name: Satellite A200-13R
  Model no: PSAE0E-011014GE

  I clean the fan, and I put new thermal paste to the processor. After finishing this job button press / the laptop works but the screen is black. The laptop shows that read the hard drive and the processor works well. I'm trying to remove the battery, disconnect the power, hold the button works / power off for 60 seconds, turn on computer with power plug, then stop, add the battery and restart * but the screen is always black *. I try to press Fn + F5 reboot screen * but again is black *.

  Any solution please?

  Thank you

  Nick

  You have disconnected the display while you cleaned up the laptop?
  Are you sure that the display is connected correctly?
  Check the cable?

  > The laptop shows that read the hard drive and the processor works well.
  How do you know that? Flashing LED HDD?
  You know, it's not easy to say what may be the problem.

  You can also try testing with external monitor.

• Have need for instructions how to open and clean the fans on Satellite P10

  There are two fans under my P10-304, however, the right fan doesn't seem to work and the keyboard rankles enough easily. Even with a cooler, it doesn't help much. I wonder if I could open fans and clean them and also the heat sink? If I can, some instruction please.
  Thank you very much

  We just cleaned the radiator and fans of our Toshiba Satellite p10 it overheats and turn off, especially when we tried to launch a DVD or new software... so frustrating... The radiator was full of dust was so obviously draconian need a cleaning. Now, we can not log in. The screen remains black and nothing happens except the blue light comes on, the cooling fans stir a bit... but that's all... BIG SCREEN BLACK WHITE FAT... ARGGHHHHhhhh what we do... No matter what your computer gurus help toshiba would be greatly appreciated... NL

• How can I clean the radiator and the fan on my Equium L20?

  3 years I've had it now, and I think he needs a cleaning.
  The tutorials to open it, or how to access the fan and the heat sink?

  Hello!

  It of not necessary to disassemble the laptop. This should be done by a technician for laptop.

  To clean the radiator and fan, you can use compressed air jet or something else and could blow the dust from the fan.

  You will get no tutorials or manual how to take apart Toshiba notebooks only FSA (authorized service provider) have some guides.

  Good bye

• My HP Pavilion dv6 on occasions stops to avoid overheating. My OS is windows 7 (64-bit), I cleaned the vents and the fan. How can I check cooling fan is working correctly

  My laptop HP Pavilion dv6 shutsdown to avoid overheating. My OS is windows 7 (64-bit). I cleaned the vents and cooling fan, but I continue to have problems with closing to avoid overheating.

  Is there a test I can perform to verify that the cooling fan is working properly. All of the suggestions. Thank you

  You can use speedfan http://www.almico.com/speedfan.php

• DV7 - 3067cl, how to open the case and clean the fan?

  Where to find a manual that shows you how to open the case to clean the fan?

  Thank you!

  Hello

  It is not easier to do component, but the procedure is detailed from on Page 94 of your & Maintenance Guide.

  Kind regards

  DP - K

• X 61 failure after cleaning the fan

  I just bought a X 61 on ebay and installed Linux Mint, VirtualBox and Win8.1 Preview.

  Everything was fine, except that the heat was worried. The fan was going on, but no air seemed to go out, so I followed the service manual and dismantled the entire machine. The area between the fan and the heat sink fins were completely clogged with oily dust and felt, so I have cleaned everything, lubricated the fan and re-assembled the machine.

  Now it will not turn on. No lights, nothing. I checked all internal connectors and they all seem fine. I've done this kind of thing often in the past, but not in a X 61.

  The only problem I encountered was that the keyboard bezel has been glued to the low case near the hinge of the LH and lever the sticks out, I had to break off a small piece of the bezel at the back, and I've come back with a rear a little loose on the bezel.

  So, my question is if there is some sort of small switch in the video cable from the screen, and it has to be precisely positioned wrt the bezel? Also, if I try to paste on the rear window, would be epoxy work with plastic on the bezel, or is there a glue better?

  Thanks for any help.

  It is now in place and running 64-bit Linux Mint and the W8.1 virtual machine, although this is not a long term installation, unless I have increase the memory.

  The difference in temperature of the tower is amazing, while the fan is doing its job. An additional error was with the keyboard: this is 2 of my 3 machines with an intermittent power switch. Fortunately, the other is a Tablet, so there is a second switch. Lid switch works, but I don't really understand how, and I have not yet tried epoxy on the bezel.

  Life is good again.

• My laptop stops due to the malfunction of the fan and gives me a message about it.

  Please tell me how to solve the problem with a laptop. I have HP Pavilion g6-2320er (A6) and on the Windows 8 operating system. For a year this laptop works well (from the date of purchase spent more than a year). Warranty expired in August 2014. (At the time where the warranty is not performed). The problem is that the laptop started to overheat. It just stops. I started to wear better past to ventilation air. But now it starts to stop frequently and even after the easy way, when turned, gives me a strange message: «the system has detected that a cooling fan does not work correctly...» Continued operation is not recommended and can result in unpredictable behavior that may cause system damage possible random stop. The system will stop in 15 seconds. To prevent stop and continue the operation... "Of course, I understand the general meaning. But what is the reason for this 'fan' work and what to do more of what's going on? Will pay for cleaning or even what options are there? Tell me, please...

  If say you that the fan does not work, make you more attention.  Heat will kill a computer more than anything else.  The computer is in itself to protect its components before it is cooked.  Not just a matter of cleaning, the fan must be corrected or modified.  Take it to a repair shop, if you are unable to fix it yourself.

  If you don't fix it, you have to buy a new computer.

• I have a my I plugged Mac when I turn again the fan is now blowing air all the time

  I un plugged my I Mac when turns again the fan is now blowing air without stop

  
  

  It is a signal that there is a problem on the boot volume. The system to do a routine check and you start in single user mode (SUM), the fan starts after a period of 3 minutes in SHORT (?) to ensure that the equipment will not become to be hot. This happens because BASICALLY the system do not have information on the internal temperature of the system; It is administered by the system which works in start normal mod.