T61: cover and non-functioning lights switch problem

Similar Questions

• What license should I provides, in India, rely on Microsoft Visual Studio 2010 Professional and Visual Studio Light Switch

  (1) if I want to build and sell, small PRODUCTS (but not services) (as a freelancer) based on Microsoft Visual Studio 2010 and last Visual Studio Light Switch, what license (s) devrais I provides, in India?

  (2) how can I get the license at a low price?

  (3) in the case if I hold a license and build the product, then what are all the license, my client should have? Ex: If I build a medical billing software, make my customer need to have the permit to switch to Visual Studio or Microsoft SQL Server 2008?

  (4) can I use Microsoft SQL Server 2008 Express on the deployment site (my client), or if my client needs to obtain a license for the database, and then which version of SQL Server 2008 build be cheaper?

  Thanks in advance,

  Hill.

  For support with Visual Studio, please click on the link below. Thank you.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• Satellite A300 and Vista 64-bit - unknown and non-functional devices

  I have the Satellite A300-1Gn
  Here are some features:

  Technology
  type: technology Intel® Centrino® 2 processor with processor Intel® Core 2 Duo P8400, clock speed of the Intel® PM45 Express and Intel® WiFi Link 5100 chipset: 2.26 GHzFront Side Bus: 1066 MHz2nd level cache: 3 MB
  
  Operating system
  GenuineWindows Vista® Home Premium 32 - bit Edition (pre-installed, Toshiba-HDD recovery)

  
  
  System memory
  standard: 3 072 (2 048 + 1 024) MB
  maximum extension: 8 192 MBtechnology: DDR2 RAM (800 MHz)
  
  Hard drive
  capacity: 320 GB
  Certification: S.M.A.R.T. disc rotation: 5 400 rpm
  
  DVD Super Multi (Double Layer) drive
  Compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD + R, DVD + R (DL), a DVD-R (DL), DVD - RW, DVD + RW, DVD-RAM
  Maximum speed: read: 24 x CD-ROM, 8 x DVD-ROM / write: 24 x CD - R, 4 x
  CD - RW, 10 x CD - RW, 16 x CD - RW, DVD-R 8 x, 6 x DVD-R (Double Layer), the HS
  6 x DVD - RW, 8 x DVD + R, DVD + R 6 x (dual layer), 8 x 5 x DVD-RAM, DVD + RW
  type: DVD Super Multi (Double Layer) drive
  
  Display
  "size: 15.4"
  type: Toshiba TruBrite® WXGA + TFT high brightness display resolution internal: 1 400 x 900
  
  Graphic adapter
  Manufacturer: ATI
  type: ATI Mobility Radeon™ HD 3650 supporting HyperMemory™ technology memory amount: 512 MB dedicated VRAM (up to a total of 2 302 MB available)
  graphics memory using HyperMemory™ with 4 GB of system memory technology)
  memory type: GDDR2 video (500 MHz) bus RAM (resp. RAM video and system memory combined) connected: 16 x PCI Express...

  I installed windows vista 64-bit to try it, and I started to download all the drivers I could find from Toshiba site... But I still have in my device under 'other devices' management 3xbase system of the device (who report that they do not work) and an unknown device "it works ok same woithout this, but my HD movies are restless...
  Is it posible to thath I missed something... Bluetooth, wireless, sound, games, camera, mic, etc., everything works...

  Thanks in advance guys (or girls);...

  Hello

  Have you installed the right graphics card driver?
  The Sat A300-1GN belongs to the PSAGCE series.
  I checked the page of the Toshiba driver and there are two pilots;
  I think that you should choose the ATI driver 8.477 display because this driver supports the Mobility Radeon HD 34xx/36xx chips.

  Other base system devices could be Bridge Media slot (for SD cards), touchpad, HDMI Control Manager.

  I didn't find these drivers 64-bit on Toshiba page. Maybe you should choose some drivers for Vista 32 bit

• Place 7 screen broken and non-functional

  Only Dell tablet fix broken screens?

  My shelf fell and the screen cracked and I can't use my tablet screen.

  Hello

  Thanks for writing on the Dell Community Forum.

  Replaces Dell broken screens, service call is subject to the availability of parts and active on the guarantee system. Send the serial number of the system via private message so that I can check the details of the guarantee, the specifications of the system and also the copy of the invoice with which the system was purchased so that I can even check before planning for the replacement of parts.

  Waiting for your response.

  Sincere greetings,

• My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

  My function paste decides to stop working randomly. What could be the problem and how could solve this problem?

  A repair from the Vista DVD installation.  Don't forget to have a backup/restore point just in case.

  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

• Problem with search and deletion functions

  I use Vista Ultimate and in recent weeks, I have problems using the search and delete functions. Whenever I'm trying to look for something in the search window does not allow me to do and goes in a hand. Whenever I delete something, a small window pops up saying deletion... .and this continues forever.

  Hello

  What antivirus/antispyware/security products do you have on machine? Be one
  you have ALWAYS had on this machine, including those you have uninstalled (they leave leftovers
  can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery

  mouse Bluetrack 4000 light turns on normally and then turns off on problem is not the battery.

  Hello

  1. your wireless mouse does not work?

   
  I suggest that you follow all the steps of the article which will help you solve the problem
   

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

• Switchport access and trunk on Layer 3 switch problems

  Hi all

  I was building a network design just for practice and I came across a problem that I didn't understand. Can someone please help. I have attached a picture to clarify things.

  Please let me know if you need information to answer my question. Thank you

  Francis

  Yes the router on a stick. However only vlan 100 is necessary because you have between multilayer switch and router ospf.

  Please don't forget to rate and select the correct answer

• ThinkPad T61 and some of its minor problems?

  I just bought a T61 and it's an awesome machine! But I have a few problems which I can't resolve:

  1) cannot send a fax. said 'No dial tone' then 'no response' (which is not true that the number is a public whenever consecutive fax number).

  2) impossible to achieve and to print to a network printer. said "the print spooler service does not work!

  Impossible to recharge my SKYPE account. (3) says payment "failed" without giving any reason valid and well that I tried to use my Visa, my Mastercard, my bank account number. 14 tent and all in vain!

  I suspect something is interfering in my computer, rather than anything else. I can help anyone? I would very much because I am lost and don't know what to do! TKS.

  Styan

  Resolve software configuration issues is not easy sometimes, even if I was sitting in front of your computer. In addition, while it was under warranty and sent it with a software problem, they would simply recreate the image on your hard drive, they would not in fact difficulty of the corrupted files, or bad configuration settings. Retail repair shops even most don't make it so much easier to reload everything.

  If you want to track it down, then it will require a lot of learning. I suggested to do a factory reset because you said that you just got this laptop, and do the reset should clear errors of software, so everything that doesn't work would probably material.

  I would consider to do, you can always reinstall your programs, and as it is now, you don't know what has been done for her in the past that has caused all this.

  With respect to the printer, I still think that it is only a matter of installing it, and I think that the problem of sype is not related to your computer at all, perhaps a technical problem on their end, but I could be wrong.

• Builder and switch problem?

  / * Okay guys .my problem is there are a 3 cases of first and second case I get entries and in the third and fourth cases I need to call a method that is in another class .this method does some calculations that must both user values enter in first case and 2 e case
  
  My problem is how I'm going to call my constructor in third case.if I say (it's not logic so) investmentM = new investments (principal, interestRate); I usually calculate correctly.well I found a way of my method to calculate the result correctly but at that moment, when I turn back on the menu at this time, he reset the values and mess up everything.if I get all values in a case its ok but I need to get them from case 1 and case 2.
  in case 3 and case 4 I just did up to these manufacturer it may give you an idea what my problem is.i stuck there.do you guys have an idea of what could be the solution?
  
  Thank you.
  */
  

  switch(choice)
            {
  case 1:
                 double principal=1.0;
                 double interestRate=0.1;
                 Investment investmentM;
                 
                 
            System.out.print("Please enter the starting balance : ");
            principal=sr.nextDouble();
            System.out.print("Please enter the interest rate : ");
            interestRate=sr.nextDouble();
            System.out.print("\n");
            
            investmentM.setPrincipal(principal);
            investmentM.setInterestRate(interestRate);
            investmentM=new Investment(principal,interestRate);
             
                  
            
            
            
            break;
            case 2:
                 int    numberOfYears=1;
                 int    numberOfTimes=1;
            
                 System.out.print("Please enter the number of years : ");
                 numberOfYears=sr.nextInt();
                 System.out.print("Please enter the number of times : ");
                 numberOfTimes=sr.nextInt();
                 
                 Investment investmentA;
  
                 investmentA=new Investment(numberOfYears,numberOfTimes);
                 investmentA.setNumberOfYears(numberOfYears);
                 investmentA.setNumberOfTimes(numberOfTimes); 
                 
            
            case 3:
                 
                 Investment fi=new Investment(principal,interestRate,numberOfYears,numberOfTimes);
                 
                 investmentA.getFutureValueMontly();
  menu();
  break;
  case 4:
                 Investment f=new Investment(principal,interestRate,numberOfYears,numberOfTimes);
                 
                 fi.getFutureValueAnnual();
  
                 
            break;
  }

  878144 wrote:
  My problem is how I'm going to call my constructor in third case.if I say (it's not logic so) investmentM = new investments (principal, interestRate); I usually calculate correctly.well I found a way of my method to calculate the result correctly but at that moment, when I turn back on the menu at this time, he reset the values and mess up everything.if I get all values in a case its ok but I need to get them from case 1 and case 2.
  .. do you guys have any idea of what could be the solution?

  Yes: Do not use a switch statement to control this. It is clearly a sequential process, so force the user to enter the values first, and then ask them what they want to do with them.

  I would also break this process in steps to methods, but this has more to do with style.

  Winston

• Non-functional graphics controller

  Hi, my computer does not start all I get is a white screen, but apparently the caps and the num lights flash a code including mine don't. I get 4 blinks which, according to the site Web of hp is a non-functional graphics controller. No one knows what might be the cause or has had this problem. I really just used to change without having to use through Hp.

  Any help appreciated

  Thank you

  Follow the instructions to the HP support document. to prepare your laptop for shipping.

• Tecra A8 downgraded XP and none of the Toshiba Utilities works

  Hi all

  I just got a new Tecra A8 - it is downgraded to XP, and none of the Toshiba Utilities work (energy saving function keeys, keyboard shortcuts, etc.). When I try to reinstall - there is always an error message (missing dll or sth similar) - I tried to update the bios - couldn't - once again a missing file!

  any ideas how to solve this problem? at least the fn keys (fn key works - I see a light come on when I press - not the functions well!)

  your help, I much appreciated!

  see you soon,

  Dimitris

  Hi Dimitris

  May I ask you what Tecra A8?
  I visited the Toshiba driver page and it seems that Toshiba provide XP drivers for two different units A8 PTA83Eand PTA82E.

  You should be 100% sure that you are using the correct drivers!
  In addition, Toshiba released the Installation Instructions of the document on the page and to my knowledge it s necessary and important to follow this line of installation guide. The proper installation order is necessary!

  So take care and check again

• ID/faces of the people in the Sierra pictures, pulling up the non-functional names

  Someone knows how to fix this? Is it a new setting I'm missing? I've already sent feedback to Apple.

  Photos, when I come across a photo of a person without a name, I can click on the field "no name" and a list of names appears. In the Sierra, however, the list includes names of new non-functional based on the e-mail addresses that are causing problems with my library.

  For example, if I type my name, I see three suggestions:

  1. my full name, with the thumbnail associated with my Photos 'face '.

  2. my full name with my email from Apple below address and the photo of my Contacts entry

  3. my full name with a secondary e-mail, which I have also listed in Contacts, with no tile

  If I take 1, everything works as usual.

  If I take 2 or 3, Photos makes a new person with just my name. It does not automatically fill in the rest of my name. I find myself with two entrances of the person, one with my full name and one with my name. I then merge these. This happens with all the people, not just me.

  I have the same problem. When I want to manually add a face without a name/person, I get very often 2 proposals:

  (1) the person sought with the profile photo, the first name and family name. If a picture is displayed, this means that I have already assigned photos to this person.

  (2) the same person, with or without a profile picture, with name, surname and e-mail. This proposal seems to come from my contacts, because it shows the same profile photo and mail the address I have for this person in my contacts.

  If I add the photo to the contact person, the person is added as a person in Photos. But with only the name, not the name, which is a little ridiculous, especially when you are systematically adding people and having many with the same name.

  I merge the two to get back 1 "individual" in photos, with first and last name (first and last).

  So somehow Photos is not capable of matching 'people' in photos to anyone in my contacts list. Even when you merged the two and said Photos this way they need to be put in correspondence.

• Bookmarks completely non functional even after reinstalling Firefox.

  Once more bookmarks became completely non-functional. I tried all the solutions mentioned in the Support site and nothing works. I tried to use Windows restore to a date before the problem occurred. I even tried uninstalling completely and reinstalling Firefox and the problem persists, do not display the same default bookmarks. Import from Internet Explorer does not work even though Firefox says it has. Can anyone provide an answer or I'll have to go back to the use of Internet Explorer which I didn't for years.

  Try a new profile.
  
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

• Light (switch) on my screen does not turn off. I have to shut my computer down several times a day to turn off the monitor.

  Light (switch) on my screen does not turn off.  So, I shut down my computer and restart several times a day, because when I put it in mode 'sleep', he wakes to the top in a few minutes and will not fall asleep.  I could put a blanket on my screen when not in use, but I'd rather find a way to make it stay asleep when I tell him.

  Light (switch) had already done once before and I was so worried that once I turned off the monitor that I would never get it new on... a bit short of money here, to buy a new monitor, but the next day, I pressed the power button with an additional downward pressure and I could so he could start working again (able to turn the market monitor).  It was about 3 weeks ago.  Now, the light stays green, unless I stop the whole computer.

  Maybe my main problem is sleep mode, which removes the screen for like 2 minutes and then he wakes up to the top and is so rude when I myself and try to sleep, I just turn off the monitor everytime I put the computer to sleep.

  Now, I can't turn off the monitor, except by turning off the computer.

  Hi JDandGinger,

  I suggest you follow the provided article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-power-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  If the problem still persists contact the manufacturer of the monitor for more help and information.