T61 file Microsoft XP - pro and printer sharing uncheck on Intel(r) 82566 NIC M after reboot

Similar Questions

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• XP Pro SP 3 firewall blocking UDP 137 and 138 even though exception "File and Print sharing" is selected

  I am running XP Pro SP 3 on a working group. I'm trying to access the files from a Windows 7 machine on the same workgroup. But the XP firewall blocking UDP 137 and 138 even though exception "File and Print sharing" is selected. When I disable the XP firewall, all right.

  Here are a few entries in the firewall exception log file:

  2012-06-01 09:53:25 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:26 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:27 DROP UDP 192.168.2.2 192.168.2.255 138 138 202 - RECEIVE
  2012-06-01 09:53:28 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:28 DROP UDP 192.168.2.190 192.168.2.255 137 137 78 - RECEIVE
  2012-06-01 09:53:29 DROP UDP 192.168.2.11 192.168.2.255 138 138 202 - RECEIVE

  I did some research on another site, and I came up with the FIX for this issue. It has to do with the node XP somehow getting ready to type "Peer-to-peer". I applied the fix in this article:

  http://support.Microsoft.com/kb/903267

  and the problem is now solved.

  Please come back and let everyone know how you fixed the end!

  However, the fact that this has happened and you don't know how concerned me (if it was my machine).

  Here's what I propose for extra cleaning:

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

• File and Printer Sharing for Microsoft Networks-problem

  Hi all
  I use pc (vista HP 32 bit) sharing-i ' ts works great except one problem:
  what I do, the check mark of V in "sharing files and printers for Microsoft networks".
  is disabled / be empty after each reboot of the pc - and I have to manually check and click OK again.
  How can I fix this and make "File and printer sharing for Microsoft networks" checked permanently?

  (I use the network server private & computer browser Services work. I do not use the password protected sharing)

  Thank you

  http://www.Vistax64.com/attachments/tutorials/2609d1232212061t-file-sharing-turn-off-network_connection_properties.jpg

  problem solved:

  It was Lenovo access connection network for lack of security settings.

  Thank you

• Cannot connect two computers windows 7 for the file and printer sharing

  Original title: trying to share files and printers on two computers and seem to have a firewall problem! Windows 7 is on both computers.

  I went through the setup procedures, I think, but still actually will not connect.

  Hello

  ·        How are you trying to share files and printer through the group home or workgroup?

  ·        What is put in place procedures have you tried?

  ·        How do you know that there is a problem with the firewall?

   

  Step 1:

  Temporarily, you can try disabling the firewall on the system and check. See the article mentioned below.

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  I also suggest you to disable the security software and check if you are able to establish a connection between the two systems.

  Note: Activate the wall and fire safety software once the scans.

   

  Step 2:

  I suggest you follow the steps mentioned in the articles below.

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  Original title: "home network".

  0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  That's what I get on my ThinkPad when I try to do the networking. I placed all the parameters correctly: all 3 of my computers are set the same. 2 workstations work perfectly. They can even see the laptop but not to open all files. The laptop can, open same network t itself file. But he can see the whole of the network (including a printer, is told by the way). I, ve gone through all parameters twice. I've even set the C drives to share via the menus of context on each computer. I have visited many forums with none even come close to this problem (they all will tell you how to set the network parameters or they get very technical and over my head).

  I tried with & without a firewall.

  No password.

  I use a wired network.

  Laptop & 1 desktop computer running vista - 1 desktop computer running xp.

  They have all the latest service packs ms & udates.

  Any help will be appreciated.

  These files can be opened by norton or lenovo network setting apps. The settings do not work only in the application of network of vista. Nor can I work norton or lenovo from other computers.

  PS how can I ensure these settings effect may just lan and do not extend to the internet?

  Thank you bb

  I tried new drivers & returned through sharing & permissions, according to Jack, but he was not good. At the level of experience of my computer I can miss something obvious, but I doubt it because I've been very careful in following the instructions. I am experencing other problems with this laptop as well and I'll just get all. I am planing to get back anyway, that's why I needed network. I wanted to Exchange files over the network to avoid having to ' wait & swap "usb drives. Thanks anyway. Thank you BB bb

• Wonder about file and printer sharing (existing home network)

  Before you start what are the risks and problems with the file for example, virus,.

   

  So should I use the Windows Wizard or the menu of Linksys to enable files and printers shared on my Inspiron 2200 and my 4600 (Desktop) dimension. I use a HP PSC 1210 all in One (Wired to desktop), pilots have been implemented on the two compositions and I use McAfee Security Center without the Protection of privacy on the two compositions. So, how do this.

   

  Do I have to install the file and printer for MS Networks sharing? What is it?

   

  Router information
  Linksys Wireless-G 2.4 GHz
  Firmware Version: v3.03.6, January 6, 2005
  Current time: Tuesday, November 6, 2007 21:57:23
  MAC address: 00:07:E9:26:4F:5 has
  Router name: WRT54G
  Host name: D3DD5G31
  Domain name: phub.net.cable.rogers.com
  Internet

  Type of configuration
  Connection type: Automatic Configuration - DHCP
  MTU: 1500

   

  Message edited by Kenster102.5 on 11/06/2007 22:28

  Message edited by Kenster102.5 on 11/06/2007 22:29

  Message edited by Kenster102.5 on 11/06/2007 22:32

  
  

• Microsoft enhanced Point and print compatibility driver printer driver is not installed on this computer

  We are running Windows 7 Enterprise 64-bit (using VMware View 6.1) virtual work stations and the connection of users to a printer Xerox 4 Type driver/file being hosted on a Windows R2 server in 2012. The driver on the server is listed as "Xerox WorkCentre 7970 V4 PCL6" and when the user of Windows 7 connects the driver appears as "Microsoft enhanced driver compatibility point and print. In the "Print Management" client Win7, it appears as the 6.3.9600.17415 version

  The Printer works fine during their Windows session, they disconnect you and when they connect in the print queue is still there but when you right click and go to "Printer properties", he throws the following error

  "The printer driver ' improved point and print compatibility Microsoft driver" is not installed on this computer. " Some printer properties will be unavailable, unless you install the printer driver. You want to install the driver now? »

  Deleting the queue and then add it again resolves the problem for Windows session, you're.

  Note: we use Persona management of VMware to save data from the user profile of the disconnections from the virtual offices are non-persistent. I've been able to reproduce this in Windows 7 using a virtual office, I can't reproduce it on my physical Windows 7 machine.

  We get around this by using Group Policy and a vbs script to delete the queue on logoff, then another script to add back on logon, but it's just a band-aid.

  In addition, a Type 3 driver works fine in all of disconnections but we need the Type 4 driver in this case.

  Hello Brian,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• Locking a PDF file so that pro and standard users cannot edit and save

  We have a standard user Adobe X and three Adobe X pro users and the rest of our personal user Reader X.  My problem is that when I create a form and lock it and then place it on our Linux Server standard and pro users can edit and save this form as if he is not at all safe.  Reader users cannot do anything except to fill in the form according to allowances for the security on the form.  Is it possible to ensure that all users are the same?  Standard and pro users are the worst to save their information in the forms.  I really want to be able to make sure they can't.  I sure not a pro by any stretch Adobe I learn something new every day so any help is gratefully accepted.

  Thanks for answering my question.  The main reason we want no the staff to be able to save a form after that that it is been completed is that many of our forms are used by all staff and completed differently each time.  They would be more than welcome to save locally to their own files over, but what is happening is that the main form is often completed and recorded by the staff.  When the form is used by the next person it is filled with the latest information of users.  I want to lock forms to stop this problem from happening.  Of course, if the form requires an electronic signature, it will save, but who is saved locally and not on the server of the Agency.

• Files and folders created in the root of C: are deleted after reboot on computers with AppStacks attached.

  Users using Visual Studio had created the C:\work folder to store projects.  After the restart, whatever it is created at the root of C: had disappeared. Is this normal behavior or the result of one or more of installation contained in the C:\ root and thus managed AppStacks by AppStacks.    Is there anyway to tell that AppStack could be the cause in addition to test each individually?

  Thank you

  It's actually expected as the operating system behavior is essentially be virtualized when an AppStack is attached. All changes to the operating system are stored in a folder called SVROOT on the volume system (C :). This folder becomes "visible" when an AppStack is attached and therefore virtualization is enabled.

• Windows XP registered and activated properly, but said that I need to activate after reboot

  Hello

  I just installed Windows XP on my computer and registret and what he does normally active. Then I installed the first update from the Download Center and restarted normally. When I searched for the next major update she said I have to vertify my windows XP again. I followed the link he provides and gets an open white window and nothing happens (it had spend half an hour).

  Just found out through the update automatically I can always get updates. Everything would be easier here at the beginning with the Download Center.

  Michael

  Please check your locale, and then the clock/date settings - they are not synchronized with the server.

• Sharing files and printing turn off the coast

  I have a thinkpad SL510 with Win Pro installed and for some reason, the file and print sharing checkbox for the Ethernet card turns off after that I have restart or restart the computer... What you have to do to prevent this?

  Thanks Andy... in fact I found this response during a search in an another forem to Lenovo for the T60... but I appreciate it... This has been really puzzled for a while now, since I didn't know that this option was in the login to... but so far seems to have done the trick.

• How to disable the sharing of files between the host and guest XP PRO?

  Hello my setup is:

  Host of XP PRO and XP PRO comments using NAT.

  How to disable file sharing between the host and guest (do not want to view or access the file share on host comments)?

  In the comments

  I tried to disable simple file sharing in folder options and uninstall

  File sharing and printing of LAN properties but can always see and have access to the

  Organizing actions of folder...

  Help please!

  Then you will need to disable "Microsoft File and Printer sharing" or you need to set restrictions with the GPO. As long as the systems have their default values the value of a Microsoft network allows to use actions.

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' answers and answers. Thank you!!

• I'm unable to set up file and printer between my laptop and desktop sharing. Both are Windows Vista.

  original title: file and printer sharing problem

  I can't set up file and printer between my laptop and desktop sharing, both running Vista Home Premium.  The printer is connected to the desktop computer that is connected to the router.  The laptop is wireless.  In network and sharing center when I do a "view full map", both computers show, but one that I'm not on (either way) is indicated by a line broken instead of solid, and I don't see any info on it on

  Hello

  What exactly happens when you click the icon of the computer on the network map? You get the error message?

  If possible after return the screenshot of the network card that could help us help you better.

  See the bottom of the articles that might help you resolve this problem.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

  Use the network adapter to manage and troubleshoot networked devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-network-map-to-manage-and-troubleshoot-networked-devices-from-Windows-Vista-inside-out

• The setting of file sharing and printer in my LAN adapter is being turned off when I reboot. Why? What could be responsible for this?

  I put the file and printer for Microsoft Networks share on IT in my LAN adapter properties. When I reboot it has itself turned off.

  My PC running Windows 7 64 bit.
  With leader & Printer Sharing, I am able to access the files on another PC 32 bit Windows 7 and the PC can access mine. After a reboot of my PC is possible - file & print sharing has set itself off the power in the properties of the adapter on my PC (the other PC is still OK).

  In Control Panel / advanced sharing settings I also file and the specified printer sharing option - and which remains lit on a restart. But it seems that it is not enough to allow these two PC to see each other.

  When I turn on sharing in the properties of the adapter to the printer & file, the two computers can then see each other (restart is not required).

  On the other PC, file & printer sharing survives through a reboot without reinitialization.

  I removed the two PCs of our homegroup yesterday evening to try to identify where the rub.
  My PC is to use the standard Windows Firewall current t.

  It is an aspect of various strange problems, I was 'enjoying' with Windows 7.  Following suggestions of the other forums, I turned off of packages jiumbo and created a connectionid identical on both systems. The Intel web site confirms that I have the Intel network adapter driver.

  It's very strange. Any suggestion will be highly appreciated.

  I think that I found the cause of the problem.
  It is a Lenovo Thinkpad and it comes with 'Logins', software to help manage network connections.
  Buried deep in the settings is a security option disable file and printer sharing.  I disabled that and will test by restarting later.