T61 with Win 7 RTM will not sleep on the current, will sleep on battery

Similar Questions

• vSphere HA is inside in vain. Operation is not allowed in the current state.

  Hello

  I'm testing vSphere HA with two hosts ESXi in my lab. I have a VM on each ESXi host and when I try to open HA by closing the port connection from the switch to one of the hosts, the cluster of vSphere tries to failover of the VM on the host failed to another host, but he is not successful.

  The events under the Cluster gives this warning:

  vSphere HA switched in vain < VM - > < Home > cluster < cluster name>. vSphere will try again if the maximum number of attempts has been exceeded. Reason: The operation is not allowed in the current state.

  Screenshot of the error is attached.

  I tried to restart the service of server vCenter and that did not help. What could be wrong here?

  Thank you.

  Shivani

  Hello adel.

  Do not disable the HA data store. If you have a physical server just power the server by pulling the power plug or just it crash. If you have virtual server vESXi, and then directly 'Power Off' there instead of the stop.

• Unable to connect to the MKS: the operation is not allowed in the current state

  Hi all

  After the upgrade of vmware tools, we have a problem while safeguarding a guest vm with avamar. VM freezes and he said; "Unable to connect to the MKS: the operation is not allowed in the current state.  It can be stopped only by killing the task in the service on the host esx console.

  VMware vCenter Server 5.1 - 5.1.U1b - 1235232

  2013 12-19 T 00: 49:15.146Z | vCPU-1 | W110: MONITOR PANIC: vcpu - 0:NOT_IMPLEMENTED devices/vide/iovmk/videVMK-vmkio.c:1492

  2013 12-19 T 00: 49:15.156Z | vCPU-1 | I120: Core dump with construction build-1065491

  2013 12-19 T 00: 49:15.156Z | vCPU-0 | I120: Exit vcpu-0

  2013 12-19 T 00: 49:15.156Z | vCPU-1 | W110: Writing monitor corefile "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmmcores.gz".

  2013 12-19 T 00: 49:15.202Z | vCPU-1 | I120: Save the anonymous memory

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | W110: Dumping core for vcpu-0

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: CoreDump: dumping core with superuser privileges

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: VMK battery for vcpu 0 is 0 x 412248155000

  2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: Start monitor coredump

  2013 12-19 T 00: 49:16.454Z | vCPU-1 | I120: End monitor coredump

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | W110: Dumping core for vcpu-1

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: CoreDump: dumping core with superuser privileges

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: VMK battery for vcpu 1 is at 0x4122481d5000

  2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: Start monitor coredump

  2013 12-19 T 00: 49:17.420Z | vCPU-1 | I120: End monitor coredump

  2013 12-19 T 00: 49:17.421Z | vCPU-1 | W110: Dumping extended monitor data

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | W110: A core file is available in "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmx-zdump.000".

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: Msg_Post: error

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: fatal error [msg.log.error.unrecoverable] VMware ESX: (vcpu-1)

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120 + vcpu - 0:NOT_IMPLEMENTED devices/vide/iovmk/videVMK-vmkio.c:1492

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.haveLog], a log file is available in "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmware.log".

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.requestSupport.withoutLog] you can ask support.

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.requestSupport.vmSupport.vmx86]

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120 + to collect data to be submitted to the technical support of VMware, run 'vm-support.

  2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.response] we will respond on the basis of your entitlement to support.

  We realized that the problem is our url filtering service checkpoint firewall. When we have disabled all begins to work very well.

• Error creating - snapshot operation is not allowed in the current state

  Hi all

  Using Veeam Backup & Recovery 6 software to replicate a LIVE VM (virtual MACHINE, 1). But I can't and I got the following error:

  Error creating - snapshot operation is not allowed in the current state

  The above virtual machine can only be copied when it is STOPPED the VM is running on ESXi 4.0.

  I have a more LIVE VM (virtual MACHINE, 2) on the ESXi Host which I was able to replicate successfully to another ESXi host.

  I contacted the Veeam Support before posting here.

  Things to note about VM 1: I can't take a snapshot manually from the vSphere client. This option is greyed (disabled) on VM1... While its OK on VM2.

  Veeam support told me that since its software uses the snapshot function of ESXi and this feature is disabled, replication cannot continue.

  Thanks for helping me on this.

  Exactly what I thought. When you delte this PCI passtrough your Backup Exec tape will not longer work.
  You will not be able to do replication when you use this passtrough.

  Only solution for replication (which is what I think you want for purposes of disaster) is to install a 3rd VM (or as physical) as "Backup Server" where you install Backup Exec and enable PCI-Passtrough to your tape drive. Then this new virtual machine with Backup Exec backup.

  After that you can delete the passtrough of your SBS and your replication will work.

  Sorry

  Concerning

  Simon

• Questions CHAPTER: classname does not exist in the current application package

  CHAP, I integrated it into my application.  When you put a file in my media with the specific file extension (.xyz) map and by clicking on it, my application successfully is started and managed as expected.  That's the good news.

  However, I tried to create a separate application to test the app-to-app content handling (so that other applications can call my request).  In the application, I create my file (extension .xyz) on the handset and then try to claim it.  However, when I try and call it, I get an IllegalArgumentException saying: classname does nto exist in the package of the current application.  I checked that my main application has seen that full classname with package (com.test.ui.MainApp) and that my separate application tries to make the invocation with this same classname.  He worked successfully on the BlackBerry Simulator (4.6 Simulator "BOLD"), but it throws the error above on my actual handset ("BOLD", 4.6.0.167)

  Anyone have an idea what could cause this problem?

  Please refer to the following.

  Support - Classname does not exist in the current application package
  Article number: DB-00751

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800429/support...

• "The operation is not allowed in the current state" message when you delete the folder

  I'm test ESXi 5.5 and mounted a datatsore of oriented export NFS in an attempt to redirect my ScratchConfig at this place. I found that I can create a folder in the datasore NFS fine but when I try to delete it, I get a message saying "the operation is not allowed in the current state. This happens on any of the files/sub-sub-sub-folders and only used account's root - I also confirmed that these directory drwxr-xr-x permissions.

  As suggested by KB1003829 which is a bit useful, but not really, I restarted the management on the host agents but it made no difference. Has anyone else seen elsewhere?

  I got this resolved, stumbling on the good guid for the NFS data store. Only after clicking around in WinSCP and realize that the NFS data store guid secondary, shorter - I then tried again to remove the original test directory and it worked.

  On a separate but similar note, then I tried to update my position zero config by applying this same guid with the command "vim - cmd hostsvc/advopt/updated updated ScratchConfig.ConfiguredScratchLocation string vmfs/volumes / [guid] / logs" (followed by a restart of the host) and it worked also.

• IAM11gR2 error YES version is not applicable to the current version of OPatch

  Hi Experts,
  
  I just installed IAM 11 GR 2. Can you please share link to download compatible YES for the current version of Opatch to resolve the error described.
  
  
  / Home/Oracle/middlewareR2/IAM/OPatch
  [oracle@localhost OPatch] $. / lsInventory opatch
  
  OPatch Version: 11.1.0.9.0
  YES Version: 11.2.0.1.0
  The YES version is not applicable to the current version of OPatch.
  
  OPatch failed with the error code 1
  
  Help appreciated.

  You install 11 GR 2. YES is already a more recent version that you can see its 11.2.0.0. but Opatch is lower. It's 11.1.0.9. Therefore, to upgrade Opatch YES no

  Kind regards
  GP

• Can I create a snapshot and replace it with an image (or link another picture than the current)?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  Can I create a snapshot and replace it with an image (or link another picture than the current photo)? Details: I made adjustments in iPhoto until now I want my (unpublished) masters, some RAWs JPEGs, create a snapshot and set the photo as the one to keep. If it is not possible, all of the recommendations (in addition the usual masters of backup and import changes).

  What I do is I have to assign some metadata down battery photo indicating of don't not to export the picture. Then, I use either a collection of smart to find the photo I want to and can not find the photos, I don't want and export all in the smart collection. or I use a Collection of post Smart, even once allows me to select only the pictures I want and not those I want.

  Of course you manually uncheck items you want to export, which work as well.

• A SQL server management studio 2012 error: PERCENTILE_DISC function is not allowed in the current compatibility mode. It can only in mode 110 or higher.

  Our company just upgraded to SQL Server Management Studio 2012 and it has been very useful because I needed to use the percentile for the code I wrote. As a first step, the function did not work because I set the compatibility mode 110 level. After that I did, the function worked. However, now it does not work yet, and I get the same error:

  The PERCENTILE_DISC function is not allowed in the current compatibility mode. It can only in mode 110 or higher.

  I went to the properties of database section, then options and noticed that the compatibility mode has not changed, it is set to "SQL Server 2012 (110). I even used the following code to see if that would help at all even if the compatibility mode is already on this mode:

  ALTER DATABASE Analytics
  SET COMPATIBILITY_LEVEL = 110 
  

  Someone already had this problem or knows if I need to change something in the properties of database for this function work? Is this just a bug in the new version?

  Hello

  I suggest you post this question in the SQL Server 2012 TechNet Forums: http://social.technet.microsoft.com/Forums/en-us/category/sqlserver

  Thank you.

• SOA 12.1.3 ORABPEL-02118 - variable is not declared in the current scope

  Hello

  I'm trying to run a code example for the conversion of input XML XSD inside BPEL (SOA Suite 12.1.3). )

  1 file xsd

  <? XML version = "1.0" encoding = "windows-1252"? >

  " < xsd: Schema container = ' http://www.w3.org/2001/XMLSchema "xmlns =" " http://www.email.org "

  " targetNamespace = ' http://www.email.org "elementFormDefault ="qualified"> "

  < xsd: element name = "email" >

  < xsd: complexType >

  < xsd: SEQUENCE >

  < xsd: element name = "ovdTriggeredDate" type = "xsd: String" minOccurs = "1" / >

  < xsd: element name = "query" type = "RequestType" / >

  < / xsd: SEQUENCE >

  < / xsd: complexType >

  < / xsd: element >

  < xsd: complexType name = 'RequestType' >

  < xsd: SEQUENCE >

  < xsd: element name = "requestId" type = "xsd: long" minOccurs = "1" / >

  < xsd: element name = "service" type = "xsd: String" minOccurs = "1" / >

  < xsd: element name = "action" type = "xsd: String" minOccurs = "1" / >

  < xsd: element name = "customer" type = "xsd: String" minOccurs = "1" / >

  < xsd: element name = "delivery" type = "xsd: String" minOccurs = "0" / >

  < xsd: element name = "local" type = "xsd: String" minOccurs = "0" / >

  < / xsd: SEQUENCE >

  < / xsd: complexType >

  < / xsd: Schema >

  2 BPEL code

  < variable name = "emailVar" element = "ns3:email" / > / / variable of type XSD

  < variable name = "emailDataVar" type = "xsd: String" / >

  < assign the name 'Assign2' = >

  < copy >

  < from > "& lt;" Email & gt; & lt; ovdTriggeredDate & gt; 16thFeb & lt; / ovdTriggeredDate & gt; & lt; request & gt; & lt; requestId & gt; 1111 & lt; / requestId & gt; & lt; Service & gt; OVDOngoing & lt; / service & gt; & lt; action & gt; Retry & lt; / action & gt; & lt; customer & gt; Batch & lt; / customer & gt; & lt; delivery & gt; Email & lt; / delivery & gt; & lt; local & gt; & lt; countryCode & gt; U.S. & lt; / countryCode & gt; & lt; languageCode & gt; English & lt; / languageCode & gt; & lt; / settings regional & gt; & lt; / request & gt; & lt; / e-mail & gt; "< / from >

  < to > $emailDataVar < /pour >

  < / copy >

  < copy >

  < from > ora: parseEscapedXML (ora: getContentAsString (bpws:getVariableData('$__emailDataVar__'))) < / from >

  < to > $emailVar < /pour >

  < / copy >

  < / assign >

  < / details >

  Get after exception when I run the application.

  < detail >

  XPath expression cannot run.

  An error occurs during the processing of the XPath expression; the term is ora:parseEscapedXML (ora:getContentAsString (bpws:getVariableData('$emailDataVar'))).

  The XPath expression cannot run; the reason was: ORABPEL-02118

  Variant could not be found.

  The variable '$emailDataVar' is not declared in the current scope. All variables must be declared in the scope before accessed. Component DN is "default/Project1!1.0*soa_c1383edb-7f32-4860-8d21-82d312a0e1da/BPELProcess1" and the corresponding Instance Id is 20 042

  There was an internal error. The flow was not generated correctly by the BPEL compiler.

  Contact Oracle Support Services. Please provide definition component of the "default/Project1!1.0*soa_c1383edb-7f32-4860-8d21-82d312a0e1da/BPELProcess1" trail and verification of instance id 20 042 using enterprise console manager.

  . Check the detailed origin described in the text of the exception message and verify that the XPath query is correct.

  -------------------------------------

  There is a solution, I found in the forum to add the following in bpel code. (Problem of access to the variables in BPEL - ORABPEL-02118)

  <>configurations

  < property name = "keepGlobalVariables" > true < / property >

  < / configuration >

  
  

  But when I add <>configurations in 12.1.3 BPEL, editor-in-Chief is showing 'element configurations is not supported'.

  
  

  Appreciate your quick help.

  Thank you

  Cdhar
  

  Hello

  The problem is "$", you don't need a dollar in this case

  bpws:getVariableData('emailDataVar')

  Please mark this message as useful/correct if it helps.

  Concerning

  Pradeep.

• APP-COMPENSATION-07092: this action is not valid for the current record.

  Cannot access panel assignments used to updates within oracle HR receive this error message. How to solve this problem.

  Please see these documents.

  APP-COMPENSATION-07092 this action is not valid for the current record by trying to access assignment [813815.1 ID]
  PERWSHRG APP-COMPENSATION-07092 when you navigate to assignments [796523.1 ID] screen
  PERWSHRG APP-COMPENSATION-07092 trying to access assignment [ID 1434212.1]
  PERWSEAC cannot enter costs for the Contingent Workers APP-PAY-07092 [1458000.1 ID]
  App-pay - 07092:Action not valid for registration: current salary for the potential asset Asg [ID 360168.1]
  Method of payment when opening errors: APP-COMPENSATION-07092: this process is not valid for the current record. [ID 289691.1

  Thank you
  Hussein

• The name of the tag: "embed" not found in the currently active versions

  How can I remove the error message displayed in it Validation of Dreamweaver:

  The name of the tag: "embed" not found in the currently active versions. [HTML 4.0]

  Extraction of tag reads:

  < embed src = "about.swf" width = "615" height = "262" loop = "false" align = "absmiddle" bgcolor = "#FFFFFF" name = "about" allowscriptaccess = "sameDomain" allowfullscreen = "false" type = "application/x-shockwave-flash" pluginspage ="http://www.adobe.com/go/getflashplayer_fr" wmode = "transparent" quality = "high" >

  Use the modern techniques of the recess.  Here is a link to one of the newest...

  http://code.Google.com/p/SWFObject/

• Connect pc with win 7 to an instrument THEN use the com port and the PPP protocol

  Dear all,

  I need to make a connecting series between a pc with win 7 and one instrument.

  To achieve this I have to use the com port and Protocol PPP. In win xp is possible but I'm not able to find the same in win7

  concerning

  Diego

  Hi Diego,.

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• HTTP Session with module GemFire-CS does not work if the session stickiness is not enabled and with spring security

  Hi I have a configured tcServer 2 (Server4, Server5 jvmRoute names) with module gemfire http session, listening to the same gemfire Locator service both with the same name in the region - gemfire_modules_sessions and region attribute id

  I also configured vFabric Web server with Http balancer as a front-end for the HTTP request without activating the rigidity of the session as shown below: I couldn't realize the no session affinity

  <Proxy balancer://tpa-balancer>
       BalancerMember http://localhost:8087 route=Server4 loadfactor=1
       BalancerMember http://localhost:8088 route=Server5 loadfactor=1
       ProxySet lbmethod=bybusyness scolonpathdelim=On
  </Proxy>
  ProxyPass /insurance balancer://tpa-balancer/insurance
  ProxyPassReverse /insurance http://localhost:8087/insurance
  ProxyPassReverse /insurance http://localhost:8088/insurance
  
  

  and I'm using spring security 3.0 for authentication and the flow of the web page is as shown below:

  page connection - "login.htm" and once submitted, it uses ' / j_spring_security_check ' and after successful authentication app redirects to ' / http://www.sigling.is/IMO/imofishing/home.htm '.

  Initially when hits 'login.htm' and anonymousUser user logon is id: 6B21CB15838B2AC1E46F66C0CC7272BE. Server5 and when the form is sent to /j_spring_security_check that the same session id is used and after authentication httpsessionsecuritycontextrepository stores SecurityContext in HttpSession as shown below:

  [09/12/2012-02:00:14][DEBUG][HttpSessionSecurityContextRepository]SecurityContext stored to HttpSession: 
  'org.springframework.security.core.context.SecurityContextImpl@b70b1ef5: 
  Authentication: org.springframework.security.authentication.UsernamePasswordAuthenticationToken@b70b1ef5: 
  Principal: com.csc.ace.insurance.security.vo.UserProfile@e26fa325: Username: [email protected]; P
  assword: [PROTECTED]; Enabled: true; AccountNonExpired: true; credentialsNonExpired: true; AccountNonLocked: 
  true; 
  Granted Authorities: ADMINISTRATOR,CREATE_CUSTOMER,CREATE_USER_ACCT,DELETE_CUSTOMER,DELETE_USER_ACCT,
  MODIFY_CUSTOMER, MODIFY_USER_ACCT,VIEW_CLAIMS,VIEW_CUSTOMER,VIEW_PAYMENTS,VIEW_POLICIES; 
  Credentials: [PROTECTED]; 
  Authenticated: true; Details: org.springframework.security.web.authentication.WebAuthenticationDetails@255f8: 
  RemoteIpAddress: 127.0.0.1; SessionId: 6B21CB15838B2AC1E46F66C0CC7272BE.Server5; 
  Granted Authorities: ADMINISTRATOR, CREATE_CUSTOMER, CREATE_USER_ACCT, DELETE_CUSTOMER, DELETE_USER_ACCT, 
  MODIFY_CUSTOMER, MODIFY_USER_ACCT, VIEW_CLAIMS, VIEW_CUSTOMER, VIEW_PAYMENTS, VIEW_POLICIES'
  

  and when the redirect to http://www.sigling.is/IMO/imofishing/home.htm, it shows HttpSessionSecurityContextRepository: HttpSession returned null for SPRING_SECURITY_CONTEXT object

  com.gemstone.gemfire.modules.session.catalina.DeltaSessionFacade creates a new session with the session id: 6B21CB15838B2AC1E46F66C0CC7272BE. Server4, ideally redirect to the home page go to another server. I have attached the full log file

  I believed that session affinity is not needed when the GemFire Session module is used without local cache and I could see B21CB15838B2AC1E46F66C0CC7272BE. Server5 entry is created in the gemfire_modules_sessions region.

  So why is - this HttpSessionSecurityContextRepository could not get the gemfire session the region object using the id: 6B21CB15838B2AC1E46F66C0CC7272BE. Server5 and directs gemfire DeltaSessionFacade to create a new session

  [09/12/2012-02:00:14][DEBUG][FilterChainProxy]Converted URL to lowercase, from: '/home.htm'; to: '/home.htm'
  [09/12/2012-02:00:14][DEBUG][FilterChainProxy]Candidate is: '/home.htm'; pattern is /**; matched=true
  [09/12/2012-02:00:14][DEBUG][FilterChainProxy]/home.htm at position 1 of 7 in additional filter chain; 
  firing Filter: 'SecurityContextPersistenceFilter'
  [09/12/2012-02:00:14][DEBUG][HttpSessionSecurityContextRepository]No SecurityContext was available from the 
  HttpSession: com.gemstone.gemfire.modules.session.catalina.DeltaSessionFacade@5cca548b. 
  A new one will be created.
  [09/12/2012-02:00:14][DEBUG][FilterChainProxy]/home.htm at position 2 of 7 in additional filter chain; 
  firing Filter: 'UsernamePasswordAuthenticationFilter'
  [09/12/2012-02:00:14][DEBUG][FilterChainProxy]/home.htm at position 3 of 7 in additional filter chain; 
  firing Filter: 'AnonymousAuthenticationFilter'
  [09/12/2012-02:00:14][DEBUG][AnonymousAuthenticationFilter]
  Populated SecurityContextHolder with anonymous token: 
  'org.springframework.security.authentication.AnonymousAuthenticationToken@9054b1a2: 
  Principal: anonymousUser; Credentials: [PROTECTED]; Authenticated: true; 
  Details: org.springframework.security.web.authentication.WebAuthenticationDetails@1c07a: 
  RemoteIpAddress: 127.0.0.1; SessionId: 6B21CB15838B2AC1E46F66C0CC7272BE.Server4; 
  Granted Authorities: ROLE_ANONYMOUS'
  

  Thanks for the additional info.

  Although, in theory, by using sessions not may work for some applications, you will have less sessions unexpected behavior. Any page you visit will result in 10 seconds of additional applications, go to the server. If they are not sticky and bounce between servers, the session will constantly be failed back between the servers. A 'problem' with modern browsers is that they appear simultaneous requests, so you can have the same session failover, at the same time on different servers, that wouldn't be good.

  I'd be curious to know why you choose to have sessions in the first place.

  Nevertheless, it still seems like there is a problem when you have enabled, sessions, so I'll continue to watch it.

  -Jens

• After the update to firefox 17.0 when I do a scan with Norton 360 it does not pick up the tracking cookies which changed 16.0.02

  After the update to firefox 17.0 when I do a scan with Norton 360, it is no longer captures the rejected. These cookies that have been picked up with firefox 16.0.02 what you have changed? Plus, I'm getting sick of these updates - at least we tell users what has changed in new versions.

  First of all, we do not say what has changed in each version, http://www.mozilla.org/en-US/firefox/17.0/releasenotes/.

  Secondly, Norton should always be able to delete your cookies (just so that you know that the cookies are generally harmless, and you don't need to worry to remove). If not, you can delete the cookies in Firefox Cookies - Information that Web sites store on your computer