T610: HP t610 embedded win 7 o/s, replaced by standard win 7 o/s. everything works except LAN.

Similar Questions

• Drivers for Win XP controls do not work on Satellite A200-1 g

  Satellite A200-1 g PSAECE-02D00ERU drivers for Win XP controls do not work!

  First of all I ve downloaded all the drivers for "model PSAEC.
  Everything is fine, but 'pilot controls. " When I install it, 6 buttons (play/pause, next, previous,...) Don t work! Become too slow cursor keys. By example, if I press it for 2 seconds in Word and then release, I can see the slow cursor movement while I m not doing anything.

  After that uninstall drivers controls (restart installation) the keyboard becomes normal but 6 buttons (play/pause, next, previous...) still don't work.

  What should I do?
  Help please!

  Please note that you must update the BIOS to the XP version if you want to use XP on this laptop Vista operating system!
  In addition, you need to install all the drivers of Toshiba in the right order. Check the installation instructions (available) txt file.

  Good bye

• How to enable embedded Win 8 standard after entering wrong license win 8 pro key?

  My laptop came with Windows preinstalled 8 standard and I activated it easily. However, last week, my younger brother attempted to upgrade my laptop to win 8 Pro using a serial key that he got his friend. Now Windows requires activation, which is linked to failure. After his arrival to know my brother that he was not a key legitimate, I decided that I should come back to the pre-installed Windows 8 standard license and activate it. But because Windows 8 standard key is integrated in my system, I can't find the legitimate standard key to win 8.

  Advice me please how I should return to my driver's license standard Win 8 shipped without having to reinstall the operating system. Will be very happy to be using legitimate software again, so thank you for your help.

  See the following topics:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows-8-1/Microsoft-product-activation/obtaining-your-OEM-BIOS-embedded-SLP-product-key-using-RW-everything-OEM-only/

  With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.

  If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.

• Satellite Pro M30 Win 7 - webcam does not work on msn messenger

  Hi all

  I have a Satellite Pro M30 Modell Nr.: PSM35E and just changed to Windows 7. But put him Nvidia card NVIDIA GeForceTM FX Go5200 Grafik 64 MB of RAM is not working properly.

  I could find a Vista driver and installed, have Aero + photos on the desktop, but my webcam does not work on msn messenger and this is the only way for me to see my family.

  Can someone help me?

  Thanks for your help

  Hello

  I m a bit confused; you have some problems with the graphics card or with the webcam?

  I assume you mean on external webcam connected to the USB port? Right?
  What happens if you connect the webcam to the laptop? Can win 7 recognize the device? Have you installed additional drivers for this webcam?
  Most of the time it s necessary to do so because I think that it s not Plug & Play device.

• Satellite C55T: Win 7 does not recognize the card, LAN and WLan

  I have a problem.

  I ve downgraded my Toshiba Satellite A5222 C55T for Windows 7 64 bit and it does not have many pilots.
  Windows does not recognize my network connection and it didn't install my wireless driver.

  Maybe I need a chipset driver, but I found no drivers for windows 7.

  Please help me!

  If Windows 7 has not recognized the LAN and WLan card, you have not installed the proper drivers.

  A5222 C55T satellite is the portable American model.
  The drivers can be downloaded from the Toshiba help page we: [Satellite C55T-A5222 | http://support.toshiba.com/support/modelHome?freeText=1200005866]

  Choose here the drivers / updates & filter by Windows 7 64 bit (left)
  Now you should get all Win 7 64 bit drivers for Satellite C55T-A5222

• Drive HARD Win 7 recovery does not work on Satellite L750

  Hello

  I have the Toshiba Satellite L750 with preinstaled win 7.

  I instaled the upgrade to win 8 (from dvd).

  After that I improve the MS site to Win 8.1 System.

  The system does not work properly (DVD is not recognized) so I have to install previuos system.

  First of all, I'm improving my BIOS for the new one - 3.60.

  After that I try to win 7 reinstal my HDD recovery (which is located on the d partition). But it does not work: it has been impossible to start recovering in the menu of the bios (F8 key does not work, it was only possible to press F2 or F12).

  So I have to install my dvd 8.0 Win and now I have it and it works. But this is only a clear system without any addons like nero, ms office etc.

  My question is how do reinstal win 7 of my hard drive recovery that I always on the d partition?
  in the bios the F8 key does not work.

  After clean OS installation installation of HARD drive recovery not working anymore. If you want to have the original image of recovery preinstalled on your machine, you must use recovery DVDs.
  I assume that you did not create this disc, right?

  In the user s manuals document clearly described how it works with the image recovery and the creation of recovery disks.

• Satellite L655-1HC: win 8.1 Fan still work and / is not closed

  Hello everyone,

  I have laptop L655-1HC owner, part no: PSK1JE-0GT00XAR, where am facing 2 problems I couldn't solve until now.
  First of all, the fan continues to work always and stops any bothers me really.

  Second, when closing, windows turns off but the machine continues to work with the fan and never stops unless I stopped it with the key switch seconds, even when I close the lid, windows turns off but the machine continues to work with the fan, at the opening of the lid it is freezing just until I stopped it manually through the switch.

  Before two or three days windows crashed down and I formatted the laptop and upgraded to windows pro 8.1 and since updated, I was faced with these issues.

  Hello

  I think that the problem is related to the system Windows 8.1
  Probably it of not known you 8 Win and Win 8.1 does not power the unit off by default. The laptop will be defined in hybrid close mode that allows you to boot up the laptop faster.

  I guess this could be the reason for your problem and recommend that you deactivate this mode.
  Please check this document Toshiba how to do this:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  Your comments would be appreciated

• Satellite C850 - Win 10 Update aborted - SYSTEM THREAD EXCEPTION NOT HANDLED

  Hello

  It is with C850

  Whenever I try to do the upgrade, first it works very good. Everything is downloaded and the installation begins. At the end until he has achieved success, I become this appear. It restart Ant try again, but I got the same screen, it restarts and work on the recovery of win 7, afterthat I have win 7 recovered and can reuse my pc. But I used to win 10. Why is this happening?

  How can I solve this problem?

  I searched and tried to fix it, but did not find anything on this subject.

  The text is in German. The bing translation is:
  There was a problem on the pc. It must be restarted. some errors were collected, and then restart the computer to run.

  (20% complete)
  If you want more information, you can search for this error later online: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ndis.sys)

  

  The ndis.sys file is mentioned in your message.
  
  NDIS Network Driver Interface Specification

  For upgrade problems could be caused by the software / driver installed on your laptop.
  I guess that the question could be related to driver WLan or LAN driver...

  Maybe you need to uninstall one of the drivers before you start the upgrade to win 10.

• Formatting a hard drive in win 8, will be the work disk XP TSF

  My XP computer crashed, damage the hard drive. I had to re format in WINDOWS 8. Tried to install XPsp3 on cd, but failed (error code 4).

  Down loaded win xpsp2 file (3.5 "disks) and tried, but failed disk 3 (file setupdd.sys could not be loaded. The error code is 4.

  Can someone help me please?

  There is no need to format a disk before installing Windows.  Put in the form, if necessary, is done as part of the installation process.

  When you've had the disk in the external case, have you tested using a chkdsk /R (a Windows tool) or the manufacturer of the utility test drive?  If this is not the case, do.

  Setup error 4 and setupdd.sys failure suggest that your computer has had more damage than just the power connector: http://support.microsoft.com/kb/330181?wa=wsignin1.0

• How uninstall we win-maximizer, it did not work conventionally. It is not free.

  I installed Win - Maximizer by mistake, I already have a lot of security. I didn't ask to do this, it's a pop-up. So I tried to uninstall the same without a bit of luck.

  A lot of security like? Do not install too many firewalls or anti virus programs (just 1), or they will conflict with each other. And analyze your system. So what happens when you try to uninstall it?

• win xp pro no longer works with disks

  I am running win xp pro 2002 SP3.  Two months ago, my floppy drive worked fine.  Now it is said that all my disks are not formatted.  I tried to format the disks of many, but none is shaped.  I get the message that the disk cannot be formatted.  What happened on my laptop and a desktop computer.  These disks are still used by a synthesizer that accepts only 3.5 floppy disks, so I know that there is nothing wrong with the discs.  Any help would be greatly appreciated.

  Check the site of the manufacturer for an updated driver. This can work

• Win XP USB Ports not working does not HELP!

  I use a laptop of Toshiba A105-S1712, under Win XP SP3.  I recently had to do a repair installation, thereafter, I couldn't use one of my flash drives.  Whenever I plugged it in, it asks to install the drivers?  To try to solve the problem, I tried two of the Microsoft fixed (50052/50028), neither solved the problem.  In an another Microsoft Update, she suggested to uninstall all the USB in the device drivers (which I did) and restart the machine.

  Well when I restarted the laptop, drivers USB installation failed with a message "invalid data".  Now I have yellow? marks in Device Manager and no USB items work.  Anyone know what is happening, or where I can get the new USB drivers?

  No, these are not Microsoft files you need. Drivers for the controllers are in the motherboard (chipset) drivers that you will get from Toshiba. You don't want the generic drivers. You want chipset drivers for your specific model of Toshiba computer. MS - MVP - Elephant Boy computers - don't panic!

• Win 7 Starter updates not working

  We have Win 7 Starter on a Netbook, we only use when they travel abroad several times each year.

  In preparation for each trip, ensure us that all updates security etc are installed.

  At the present time, we initiate a ' Check for Updates ', but spend hours & no update is identified & Win Update appears to be blocked.

  We rebooted the computer several times, ran MrFixit convenience store & update of JAVA, but still without success! Any other suggestions?

  Had struggled with this problem for some time:

  Ran MS Security Essentials Scan:

  Found HackTool:Win32 / Wirekeyview & deleted

  Tried to download KB947821 "System tool" but it would not be installed. Problem with WSUSSCAN.cab - hung on the search for updates on this computer.

  Rerun the diagcab: error 0 x 80070057(2015-12-18) not fixed

  Run MrFixIt50123.msi.

  Made some changes to Component Services: (changed to Auto manual).

  Ran SFC/scannow at night: no violation of integrity.

  In the morning found 62 loans to install updates!

  Finally, seem to be up to date!

• My installed removed GeekSquad factory embeded windows 8.0 and replaced it with windows 7.0

  they did this with my permission from me. uninstalled windows 8.0 and windows 7.0 installed.  Date of this happened to 29-12-14. picked upwards took home. was mad when geek agent told me that they rmoved windows 8.0 and 7.0.i downloaded have a pc hp 1534. It did not come with 7.0. this sense then my computer never has good race, very well only poorly.i had their output 10 times to solve all its problems as well not reverseing he thew action performed with 7.0 to 8.0, then by installing windows upgrad Windows 10.0.  so my computer has 7.0,8.1,and 10.0. can someone out there tell me how to reverse this problem help 7,0 8,0 action please.

  Confirm that you still have the product key Windows 8 or 8.1 embedded by installation and execution of ProduKey then look for the key BIOS OEM Windows 8/8.1, which is how it should be recognized if still on the chip.

  If so, you are good at 8.1 of Windows Installer Clean after step 4 Special workaround to install Windows 8.1 with a key of 8 window.

  However, in the same time, you can get the best of the best OS installation by making a Clean 10 of Windows Installer and activate with the digital entitlement already assigned if you upgraded in - place and active or directly by using the product key of WIndows 8 to activate after installing.

• Win 7 license no longer works after update to Win 10

  I got Win 7 through DreamSpark and installed it on both my desktop and laptop. It worked fine for almost a year.

  After that I updated one of my computers to win 10, I got error (0xC004C008) on the other which is always on Win 7. It is said that my product key has been used many times. There can be no. It is on both computers, install one each and an automatic update. And no one knows the key. It's ok under LICENSE DreamSpark, which allows two computers to run with the same product key.

  How can I solve this problem? Any help is appreciated.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  = If the above does not work =.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  J W Stuart: http://www.pagestart.com