T61p not internet connection WiFi

Similar Questions

• HP M9V10PA #ACJ: usb. Bluetooth not share internet connection, wifi direct does not

  M9V10PA #ACJ model number

  HP deskjet 5525 e printer all in one

  question: -.

  1.) can print via usb to the laptop window function 8.1, allows to print wireless from my smartphone Android based without direct WiFi router, connect to eprint, wireless with mobile router but can not print from my new hp laptop network is limited with! sign and the printer is not detected. (if printer problem, then it can not print from mobile and if problem laptop, he could not able to connect to internet I use.)

  2.) my computer laptop wifi direct support means can I Exchange offline like bluetooth and can my printer is my computer laptop wifi and I can connect from printer.

  3.) bluetooth teathering in andriod do not share internet on my laptop when I teather.

  4.) usb teathering does not share internet to andriod which is samsung galaxy mobile new j7 sharing internet via wifi.

  None of your support team is able to answer all these questions and not even want to listen to. All what they just time passes I try for 5 6 7 6 hours wasted days. they have just replied to the request is transferred to the technical service of master. If you have a mail solution please me [email protected]

  USB and bluetooth internet sharing in 8.1 window I had to update my driver in the Device Manager I have updated ndis network driver that was yellow highlighted in color and it was not installed in window 8.1. After installation two teathering worked well.

  For direct wifi in the printer I just on my direct wifi on my printer and network printer highlighted me in networks in form of PRINTING HP 41 Deskjet 5520 series with signs ! in wireless. ! sign simply means the network is limited and cannot share internet. So jusst linked to that as network limited and then used software to connect as wireless HP printer. It worked well, but have still the issue with speed on the network even my signal is full. Wifi printer on the direct network access speed is very very slow, I'm connected.how to improve the speed, I don't know.

  Another issue is that my laptop is same average direct wifi capabilities to communicate with other devices can I create my own hotspot by laptop same name network HP-PRINT 41 Deskjet 5520 series in printer not supposed to share internet, but at least for wireless data sharing.

• Establishment of a network without internet connection wifi

  I'll set up a wifi network in a place WITHOUT an internet connection.

  I have an Airport Express to the location and my MacBookAir.

  I have a Samsung smart TV in the place and I would like to use it to watch the content on my laptop (iTunes and elements in the movies folder), but can't find a way to do it. I tried an AppleTV 3rd generation, but which will not work because it requires an internet connection to complete upward. I'm not having luck with Airplay or mirror screen either. I tried a Thunderbolt/HDMI converter and I can get the picture on the TV, but the sound comes through my laptop. It is annoying because the TV is connected to a decent sound system.

  The TV has two HDMI ports, one for the cable/satellite and one for a DVD player (MHL / DVI). It also has an ethernet port and a USB port.

  I would like to * fine * want to stream from my laptop to my TV, but if I can't do that, I'll do it, installs for all cable set up will get the video and audio into the TV. Y at - it a box of streaming that doesn't require Internet?

  Welcome suggestions, especially if they are in basic English, I'm really bad at the net jargon.

  Thanks in advance!

  You can be very sure that other people have tried.

  Solution of workaround for apple tv without an internet connection?

  Just using a tethered phone or even dial-up internet so that DRM can work would help.

  http://physedagogy.com/2014/09/25/no-Wi-Fi-no-problem-using-Apple-TV-to-mirror-y our device without wifi.

  A lot of blogs on this topic and a lot of useful info in some of the answers.

  Y at - it a box of streaming that doesn't require Internet?

  Loads of them... look for the Plex.

  The problem is (most legitimate at least) media sources tend to put a priority on the establishment of copyright law.

  I tried a Thunderbolt/HDMI converter and I can get the picture on the TV, but the sound comes through my laptop. It is annoying because the TV is connected to a decent sound system.

  Switch sound on hdmi.

  IA-Thunderbolt-HDMI-connecting-to-HDTV http://Apple.StackExchange.com/questions/92493/How-can-i-Troubleshoot-no-audio-v

  Again, you are not the first to have the problem... loads of experience if you googled around to find out how to get his work... or if the laptop is a model then it might be impossible.

  Apple makes things difficult when you don't have internet... it is just to have a tethered phone and really just do the little bit of work involved in the installer... or the same 56 Kbps dial-up modem.

• limited access/no internet connection wifi at home

  I connect my laptop to router at home via wifi. But I had limited or no internet connections message often enough. Usually after the diagnosis, it will reconnect and works very well. However it will not work for long.

  Diagnosis looks like this

  

  

  And could someone help me with this?

  Thank you.

  Willa Hello,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of your computer?
  2 - is your computer to connect to another wireless networks?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur for the following reasons:

  -Wireless adapter switch is not activated.
  -WEP, WPA or WPA2 key or password security issues.
  -Cables are not connected properly.
  -Corrupt or incompatible drivers.
  -Missing updates.
  -Incorrect network connection settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please use the suggestions provided in this Microsoft article knowledge based and check.
  Reference:
  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7
  http://Support2.Microsoft.com/kb/2779064

  If this does not help, use method 2.

  Method 2:
  Suggestions of use contained in this Microsoft Help article and check the issue.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• WNDR3700 not internet connection due to the storm

  My modem to broadband ISP (ARRIS TM822) was killed during a storm, it was replaced with the same model, and at the beginning, when I plugged my router, the wireless worked well. I'm not in the settings or something, just plugged in, and it worked perfectly. However the next morning, I was unable to connect to the internet.

  I did a lot of troubleshooting:

  • Firstly, I fed all the way down, pulling cables, batteries on the modem, etc and started in sequence. This is done several times without success.
  
  
  • I updated the firmware on the router, done the commissioning, no luck
  
  
  • Connected on the router, using the routerlogin.net and run the configuration wizard. Got the message saying 'No Internet connection detected' ' Please check connection to the modem cable/DSL and of Internet WAN port.
  
  
  • Did a factory reset and used the resource CD. To the tab of preparation, got 'No adapter' ' is either disabled or no Ethernet card Ethernet card is installed on this computer...» "I've updated the driver for the LAN on my computer (it's something RealTek) and uninstalled and re-installed. Same result.
  
  
  • In addition, the port is very well. The LED indicator for the Ethernet port is shining green on the router and the computer, the port "lights" to show a good connection. It also works very well when it is connected directly to the modem.
  
  
  • The State of the computer shows LAN network data is sent and received when it is connected to the router, quite strangely, even if I can't connect to the internet.

  Thus, it has been a long and frustrating day. I'd appreciate help on solving this problem.

  Thanks in advance.

  Hi Elaine,.

  I couldn't make it work. I pretty well confirmed, however, it is the router. I tried another router and it works very well with the modem, and I had a friend check my router on its network. It did not work there either. I'll have to buy another.

  Maybe it was damaged during the storm that killed the modem. Just very strange that he worked for a while before stopping and that he was not completely killed as the modem, just maybe the internet port. Both have been connected to a surge protector as well! Maybe I can get compensation from the manufacturer. Well...

  Thank you for following it upwards.

• Linksys does not detect not internet connection.

  My linksys router hotspot does not detect my internet connection. My internet connection is clear. How would I fix this? Help, please.

  Hello

  You need to reset the Linksys router and then check if the problem persists.

  Note: you need to contact Linksys in order to reset the router.

  Hope this information helps.

• Sharing works do not Internet connection

  OK im trying to make my computer vista laptop wireless for my xbox 360 and im struggling to try to leave Internet connection sharing when I go to propities and go to the sharing, I have the box that says allow other network users to connect through this computer's internet connection I click on it and click ok , then it opens with an error message indicating an error occurred while the connection was activated and it does never time I try and select it ive tried something different and looked online and can't find someone with the same problem or answers as to the difficulty that I even tried bridging the connections and it did not work im not sure if its because of my computer is connected to a router im trying to use my computer and wireless ICS were like this, it will only work if it was connected to the local network

  Hi rhawley64,

  Thanks for posting on the Microsoft answers Forums.

  Have you tried to connect your XBOX to your computer via a wired connection?

  1. first of all, have turned on your Xbox. Also have your PC on, because this next part is everything with the computer. It will probably work with a wired connection as well (but you could probably just hang to the top your modem or router then), but here it is. First go to start and go to your control panel. Switch to Classic view using the link in the upper left corner of the window. Find the network connections and open it.

  2. you should see a "connect to the Local network' (or disconnected, it's to connect to the Xbox) and your internet connection (mine is called"Wireless network connection"). Connect the Ethernet cable to your laptop and the back of the 360. Select the 'connection to the Local network. After it is connected, turn off your internet connection. Once it is disable right-click the internet connection, and then click Properties. Go to the Advanced tab and check "allow other users of the network to connect through this computer's internet connection". Allow that this ends, it may take a little bit. Once this is done, your internet connection should say shared next to the State of the connection.

  3. check your internet connection. Once it is fully connected, right-click to 'connect to the Local network' and click on repair. Allow only at the end. On your Xbox, find the system control panel and browse until you find 'connection to Xbox Live Test. Test the connection. If it works, congratulations, you don't need this next part. For some, at this stage, they get a DNS error. There are a number of ways to solve this problem.

  4. you must have a connection to a router. To browse the internet once again, you must disable the "connect to the Local network' and then to repair the Internet connection (follow the steps above to activate it again once you have finished). Go to http://192.168.0.1. You will be asked for a connection. On most routers, this is:

  User name: admin

  Password: (no password)

  If this does not work, look for the login information for your model of router. Once connected, you have to find where your server DNS IPs would be listed. On the top bar, click State. Under WAN, you should find DNS IPs. Manually enter them into your Xbox (rather than have it find automatically) and test your connection again. At this stage it should work. Any other error can be search online.

  After following the steps above you have established a wireless via your computer with your Xbox?

  Please post back and let us know if this information was useful to solve your problem or not, so that we can help you if necessary.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CC sees not internet connection

  Hi, I can't open my CC apps as my CC does not see my internet connection, I get the error: "your computer seems to be offline. An Internet connection is required. If please connect to the Internet and try again. "I'm connected to the internet... This is a new problem, as he has worked for months, why it suddenly does not work?

  HidiPixi74, allows to try the solutions mentioned in the article below and check if that helps.

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Not able to share the internet connection WiFi ad-hoc assistance.

  Original title: sharing wifi on ad hoc.

  I want to share my connection to internet wifi in ad hoc aid. IM able to create a network ad hoc but both the host and client are not able to connect to internet

  Hi KarthikBN,

  The same adapter wireless or wired are unusable in both networks. This means that a network adapter must be used to connect to the Internet providing and other should be used to create the ad hoc connection.

  Hope the helps of information.

• After the change of username & password for wireless internet connection WiFi printer is not responding.

  Original title:

  Canon Pixma MG5200 (printer WiFi)

  I changed the username & password for my wireless connection internet and since then my WiFi printer does not respond after that I did mentioned the new configuration. I tried to reset the printer with its installation CD, but at the end of installation, I get a message that the printer is not found on the network. I also read the help manual, but I couldn't solve the problem... I really appreciate a clear explanation for having my printer answer & working again.

  Hello
   
   
  1. what exactly happens when you try to print? You receive an error message?
  2. other wireless devices work properly?
  3. what operating system is installed on the computer?
   
   
  Check if the printer is on and properly connected tour.
  Method 1:
  You can run the fixit from the following link and check if it works:
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Try the steps in the following article and check:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  You can also consult the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  I hope this helps!

• internet connection wifi does not work after entering safe mode

  It works when I connect it to the router with cable, I had this problem before & there was a command typed in cmd that solved but I can't remember it, any help?

  Interesting... If you have booted without failure then you restarted in normal mode and your wireless settings no longer work?

  UH... Well the first thing I would do is to disable and reactivate my wireless card.  The second thing I would do is check I get an IP address on my wireless network, this is done in the command line (cmd) by typing "ipconfig".  If you get an IP address then you know that your router works on the dhcp protocol, but to confirm I would ping the router, which will be your entry door, which is usually something like "ping 192.168.1.1".  If you do not have an IP address, you should try to renew and see if you can buy a... "ipconfig / renew".

  In addition, you will need to check that you are actually connected to a wireless network, it should appear in your software wireless windows, or you proprietary wireless NETWORK card software.

• Vista SP2 not allowing not Internet connection

  I recently installed the new windows vista sp2. Now, I did that I was not able to connect to a wireless network and the internet sometimes decides to work when it is connected through the LAN.

  I went back to sp1, and now it is fine.

  does anyone else have this problem? If yes how can I fix?

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  So that the network is working properly, let's check to see if your network services are working properly.

  1. open the Start Menu

  2 type services in the start search box and press enter

  3. click on continue in the UAC prompt

  4. search for network connections, network list Service, knowledge of network and Service of Network Store Interface locations

  5. check that the status is set to started and Startup Type is set to automatic

  6. If this is not the case then right-click the service and select start to start the service

  7. make a right-click the service and select Properties, change the startup type to automatic

  8. repeat if necessary for the services listed in step 4

  If you still have the problem of connection to the network or to the internet follow this steps that fixes most of the problems of connectivity.

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP Broadcast Flag:

  Link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  This registry path, click the (GUID) subkey that corresponds to the card network that is connected to the network.

  On the Edit menu, point to new, and then click DWORD (32-bit) value.

  In the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  Right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  In the value data box, type 1 and then click OK.

  Close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  The only program that I'm aware of that currently relies on IPv6 is the new Windows meeting space. The first 2 changes will cause this program is not to work - but all of your normal (IPv4) connections will leave unaffected. If it causes problems that you can't overcome, simply go back to the original settings.

  To clear the DNS cache:

  Click Start, type cmd in the search box, and then click cmd in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  Once at the command prompt, type ipconfig/flushdns

  You can click on the link to try a few other network basic troubleshooting steps

  Network connection problems:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Photosmart 5520: Not internet connection post update download

  5520 new. Connected to internet and downloaded straightup update. Now I get "server connection error... check the connection etc. This is done via the touchpad printer so the browser interface. Then... no ePrint or possible applications. Direct wireless for devices works fine.

  Could it be a corrupted download of update? Anyway to force a reinstall?

  Any thoughts?

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Wireless signal recognized but not internet connectivity: laptop HP 2000, model QE334UA, Windows 7

  I have a 2000 Notebook PC HP, Model # QE334UA, running Windows 7.  The wireless signal is showing all the bars at the bottom right, but I am unable connect wireless to what anyone (for example, any web browser, Outlook, Dropbox).  When you connect via a LAN, however, I have no problem.  Here are some details on what I tried:

  1.) this same problem occurs on all the networks I tried, even if the other computers are on these networks, is not a problem of router/modem.  Yet, I restarted those and nothing helped.

  Rebooted 2.) the computer.

  3.) done a system restore.

  4.) checked IPV4 settings make sure IP & DNS server addresses are configured to automatically get.

  5.) turned on and off the wireless on the keyboard button.

  6.) as gone with the Device Manager and press update driver software for all network adapters.

  7.) deactivated and reactivated all NICs.

  I have read many other forums - than where I got these ideas- and it seems a common problem, but I could not find an answer that works.  I'm not too technically savvy, so maybe I'm missing something, but any help would be LARGELY APPRECIATED, especially because my warranty just expired.

  Thank you

  Zack

  I have it!  It turns out that my SonicWall VPN has been the origin of the problem.  Thank you!

• WRT54G - Internet connectivity failure - everything seems to work, but not online

  I have a WRT54G V8 router, who is 18 months old. Its used by 3 laptops to connect to the Internet (Wi - Fi all). All 3 laptops unable to connect all of a sudden. Steps are taken to solve the problems, still no luck. Please suggest if something else can be done.

  1. first test was to remove the router and connect a computer directly to the modem via a LAN comcast cable. Internet is available

  2. I have hard reset the router and configured again. No luck

  3. check the connectivity to the Internet through ports 1 to 4, no luck

  4. I can see the available signal and connect to the network, but not internet connection. I see the cell as shown (all dynamic) IP address obtaining

  5. I upgraded the firmaware to 8.0.6 version and and not set up once again, no luck (same as step 3 & 4)

  6. removed the WEP security, does not

  7 soft reset on the router (via the admin page reset to factory settings), no luck

  LED status

  Power - on and yellow

  Cisco - on

  WAN - SUITE

  Internet - ON and flashing

  Lights of port - when a laptop is CONNECTED

  I see the excellent signal strength and all laptops can connect to the network, but cannot go online. Google chrome shows a message hosting "solve" until timeout. Laptops show a 192.168.1.XX IP address. 4 ports are also not connect to Internet (mobile one GETS IP address via the ports as well)

  I have no other options left. I've seen a similar thread here (http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=2288), but no response. Please suggest what to do next.

  Okey, I finally found the problem. His Modem.

  Router is not able to get the IP address of the modem if the modem is started first and then I plug the internet cable to the router. But if I keep the router and modem connected and then reset the modem while keeping the router powered on, the router receives an IP address.

  And in both cases, if I connect the laptop with the modem directly, computer laptop can connect to the Internet.

  I bought a new router (WRT54G2) thinks that the problem is with the router, and I can reproduce the same behavior with both routers constantly.

  Make sure you modem is Motorola surf.