Tab 2 A10-70 - glued hourly language/time zone screen

turned on my tab 2 A10-70 for the first time - it shows the screen of "set the language and time zone, but I do nothing that do accept the choice that I have selected.

The only thing that looks like a button is the small blue dot at the bottom, but nothing happens, no matter where I touch or swipe.

It allows me to change the language and time zone, and when I do, the lenovo logo down inside a little bit, but still nothing.

Mod edit: System model added to the front of the subject line to improve visibility / clarity.

have you seen the arrow in the lower right on this box? It is small enough

Tags: Lenovo Tablets

Similar Questions

  • vCenter 5.5 cannot change time zone

    Have recently updated my environment at 5.5 - everything was going pretty well, until I looked into the vSphere Web Client that shows an inventory completely empty.  vSphere Client is fine.

    As I said that the upgrade went without a hitch, talk to a colleague he asked me to check the time parameters for the hosts and vcenter.  Hosts were very good.  However, vCenter device is blocked on UTC.  (I am GMT) so there is difference of 1 hour, thought I had cracked, but for some reason, I can't change the time zone in the apparatus of 5.5.  Hitting enter doesn't change time zone screen connected via SSH to change the file that I did, it's still showing as UTC.

    Someone else came across this little foible?

    It's OK I fixed it with this KB - KB VMware: time zone setting ESX host correct time zone is GB.

  • Tab Lenovo A10-70 2, 10 "Tablet without WIRE GRAVE!

    I bought the

    Tab Lenovo A10-70 2, 10 "Tablet

    2 days ago.

    It has updated to android 5.1.

    I'm sitting with the Tablet approximately 500mm away from my wireless router and the Tablet tells me that I have an excellent connection?

    My tablets wireless keeps dropping out all the time and becomes unusable!

    Y at - it a fix for this please?

    If this isn't the case, I plan to return this POS to the retailer tomorrow for a full refund.

    Please look at the other threads in this forum for more information on how to DOWNGRADE this tablet to firmware android stock 4.4, which is the only solution that I know and believe me, I looked.

    I bought two of these (A10 - 70L) and I loved the tablet. I, like you, made the mistake of "redevelopment" this 5 Android and it became a useless piece of rubbish crap. WiFi drop out every few minutes is just totally unacceptable and there are also other problems.

    I've learned how to stock firmware downgrade. After first make the mistake of doing it with a 10 - 70F firmware (version non - 4 G) I finally got the firmware 10-70L stock on it, so I've updated all of the updates from 4.4 and am root (kingroot) and just be deleted the Lenovo update tool ensuring that he'll never 'upgrade', once again and now it works perfectly.

    My advice: take the time to learn how it down because it is (in my opinion) a great device with 4.4.

    What I find quite unaccelable, is this problem of WIFI-drops-all-the-time-after-upgrade was reported here and in other forums on the right after the 'upgrade' have become available and there is STILL no solution for it. It's not as if Lenovo does not know about it. It is also quite rude to their customer 'support' to say ' well, it's not our problem you installed our upgrade and ruined your tablet. Maybe they're not legally responsible in China or somewhere like that, but here in the EU that they are clear.

  • I used 'Customize Firefox' to change toolbars show, and now the Firefox Customize, tab keeps appearing no matter how many times I close.

    The window customize Firefox and tab guard popping open at seemingly random times. This continues to be no matter how many times I close.

    One possible reason is that if it was added as a second 'Home tab' in which case it will be displayed in each new window (Ctrl + n) and every time that you click the Home button.

    To verify that you can use the page Options, as described in this article: start-up, homepage, tabs and download settings.

    Look for a vertical bar character at the heart of the area that separates the two addresses. A simple example with short URLS:

    https://www.mozilla.org/|about:customizing
    

    The bar certainly can be hard to spot with long URLs, but when you find it, delete everything to the right of the bar, then the bar itself (I suggest to remove the last bar so things don't accidentally get it together).

    Was she?

  • Tab 2 A10 - App icon missing

    A tab 2 A10 bought it recently but it took over and replaced him on the advice of Technical Support. Now more questions.

    The first has a little button in the bottom toolbar that showed all the applications available. It doesn't have the same available button so I have to turn to page to see what's there. Ask yourself if there is in this tablet or simply what is displayed on the pages of other applications? In the other, with the apps key, all that are shown on the "bonded" pages for use. Do not have this choice, to view all available applications (if any) there could be in the tablet. Suggestions?

    Thanks for any help. New Android tablet, so be patient.

    FFP

    Mod edit: System model added to the front of the subject line to improve visibility / clarity.

    Do not take into account. Do you have a factory reset, several updates installed, working all right now.

  • Converter USB-Ethernet Lenovo's tab 2 A10 - 70F

    Hello

    I had the tablet a few days ago and I want to connect it with my router via a LAN cable using a microUSB-Ethernet Converter. Can anyone recommend such a converter, knowing that it works with tab 2 A10 - 50F?

    THX in advance,

    Michael

    So, it's me, again

    I've updated my tablet with works of A10-70F_S000120_150907_ROW_TO_A10-70F_S00121_151222_ROW and everythings, WiFi ok, its ok and my Ethernet connection via USB works also! The latter was a Kitkat 4.4.4. issue.

  • Cannot set the time zone of Moscow winter + 3 hours.

    Cannot set the time zone of Moscow winter + 3 hours.
    Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
    It is an error of your software when you are ready to address this issue.

    Automatic deactivation date & time(Settings>Date&Time...)

  • to change the clock to the time zone of the East, but it is not in my time zone tab, how do I fix

    to change the clock to the time zone of the East, but it is in my time zone tab is downloadable

    http://www.pchelpforum.com/Windows-Vista-7/103836-how-change-Windows-Vista-time-zone-clock-Eastern.html

    http://WindowsXP.MVPs.org/timezones.htm

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-display-of-dates-times-currency-and-measurements

    Hope this works

  • call after 1 hour reset time

    Ive tried most of the things affecting him the right and internet time ive checked if time was running out it worked but after 1 hour it resets back I don't know why can anyone please help me its really annoying D:

    Hi cloudy,

    Thanks for posting your query in Microsoft Community.

    I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

    1. The issue has started happening recently?
    2. Have what troubleshooting measures you tried so far?
    3. What is the setting of the time that it resets?

    The question could arise if the system is misconfigured in the BIOS time settings or Windows time service is defective. In order to diagnose the problem, I would suggest trying the following methods and check if the problem persists.

    Method 1:

    Restart the "Windows Time" service and see if it helps.

    (a) press the Windows key + R.

    (b) type services.msc in the Run dialog box and click OK.

    (c) set the startup type to Automatic.

    (d) if the service is already started, the restart service.

    Reset the clock and time zone settings. Check if the problem persists.

    If the problem persists, try the following method.

    Method 2:

    Boot to the BIOS settings and make the necessary changes in order to correct the time settings. Contact your computer manufacturer for assistance. Reboot the system after correcting settings and check if the number is reproduced.

    Important: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet?

    Dear all

    I need help with the following problem:

    Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet.

    Appreaciate help on this problem.

    MSD

    I find it easier and faster to use just this link, which goes to the same place as aid > online help for Photoshop:

    Using Photoshop | Photoshop help

    To bookmark so that you can find.

  • get the value of the sysdate in 24-hour format time

    Hi all

    How can I get sysdate in 24-hour format time value (the result should be the only number, not the varchar value)?

    Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

    PL/SQL Release 11.2.0.1.0 - Production

    "CORE 11.2.0.1.0 Production."

    AMT for Linux: Version 11.2.0.1.0 - Production

    NLSRTL Version 11.2.0.1.0 - Production

    Select to_number (to_char (sysdate, 'HH24')) of double;

  • PHP - time time converted by time zone hours and days

    HAVE THE SOLUTION

    A person enters a form with; day, month, year, and submit´s.

    This gives the word Place of birth info

    By submitting these data, the user will receive new info:

    1. the day of the week associated with each date

    2 a special for each date

    (1 and 2 have a lot more, but I think that not necessary for this ex in)

    I created the table:

    Calendar (for the 100 years) which also has answers to the column for 1 and 2 above for each date

    It is then INSERTED etc. for a user table and works perfectly on the next page that users see.

    WANT THE SOLUTION

    But I also have a more advanced option that I call more precise

    In this form (new shape) the user must enter: minute, hour, day, month, year and country and submit.

    Here, the user wants to obtain more precise info from the day of the week and it can be + or - an associated day to where they were born on the globe.

    A. the time zone 0 - this is Myanmar.

    B. (DayInMinutes) table has a column for each day in a few minutes. Ex Thursday is 5760

    C. a table (time zones) has each country (124) in a few minutes, associated with the 0-zone schedule. Ex. Norway is 330, USA (PST) is 870, and New Zealand is - 270 (New Zealand is ahead)


    So when users enter their data above, I already know B and C of these tables.

    But now comes the part I don't know still Don t .

    How to add numbers of table b of the table in C and then use this number to determine what day it is actually more precise.

    (table DaysInMinutes also have columns with every minute, the hour, the sum of these etc, every day. So if I get the sum of the tables above (B and C), e.g. 5983, this table will determine exactly which is Thursday min 43 and 03 h)

    QUESTION

    I read David powers Php Solutions... c. 14 and so I know it's probably very simple. But...

    (there are probably easier ways to do it. But, as my knowledge of php is only a few weeks, I just use my mind to set up these things. So, please answer this first way 'roundabout'. Because WHEN you're working, I can easily 'peal the union' later)

    Can someone tell me how I can do this in PHP?

    Thank you, David.

    I will be so just figure it myself.

    Richard

  • Then the tab 2 A10-70 Lenovo run all creative Cloud applications?

    Hi, I take a few beginner courses graphic design and I have a small budget, but I need a computer or a tablet that will run the creative cloud apps. I was really interested in the Lenovo tab 2 A10-70, but I don't know if he can run all the applications. Any help would be appreciated. Thank you very much.

    It runs the Android operating system, so you cannot run any desktop applications such as Photoshop or Illustrator on it.

    It will operate the mobile applications such as Photoshop Mix cloud and Photoshop Fix, sketch of Photoshop and Illustrator to draw.

    Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

  • difference in hours between two time zones of differnet

    I have a sysdate (EAST) and a function util_pkg.local_tz returns a different datetime value.
    I need to get the difference in hours between sysdate and another date.

    Select sysdate, util_pkg.local_tz (sysdate, ' Asia/Seoul') of double;

    18/05/2011 11:15:00.000000000 FROM 18/05/2011 10:15 PM + 09:00

    Quest:-find the difference in hours between these two date and then add the difference of hours + sysdate

    FUNCTION local_tz (p_datetime IN TIMESTAMP,
                          p_timezone IN VARCHAR2)
          RETURN TIMESTAMP WITH TIME ZONE
       AS
       BEGIN
          RETURN FROM_TZ(p_datetime, TZ_OFFSET(con_database_timezone))
                         AT TIME ZONE TZ_OFFSET(p_timezone);
       END local_tz;

    When you calculate the diff between TIMESTAMP WITH TZ they both are converted to time UTC (in fact they are stored as UTC). So diff between SYSTIMESTAMP in EST and SYSTIMESTAMP in Seoul will always be 0, as bioth are "now". You need to cast TIMESTAMP WITH TZ 'losing' time zone timestamp:

    SQL> select cast(systimestamp at time zone 'Asia/Seoul' as timestamp) - systimestamp from dual;
    
    CAST(SYSTIMESTAMPATTIMEZONE'ASIA/SEOUL'ASTIMESTAMP)-SYSTIMESTAMP
    ---------------------------------------------------------------------------
    +000000000 13:00:00.000000
    
    SQL>  
    

    SY.

  • Eastern showing incorrect time zone

    On the Surface RT: PC set correctly on Eastern time zone, but the time displayed is 1 hour in advance.

    Try this:

    1. On the start screen, enter the Date, tap settingsand then click set date and time.

    2. On the Internet time tab, tap or click change settings.
    3. Check the box synchronize with a time server Internet and then tap or click update now.

    Hope this helps,

    Kate

Maybe you are looking for

  • Tecra S10 BIOS update 1.70 - anyone know what is included?

    I hate the fact that all these years that Toshiba aflter still insists on not to provide a list of the changes on the new BIOS updates.It's boring.

  • NEW optical filter 2K for F55 and F5 CBK-55F2K Option

    All, We will release a new optical filter 2K for the F55 and F5, called the CBK-55F2K Option. The CBK-55F2K translates into 'softer, more organic' imagery when shooting in 4K. When shooting HFR in 2 K RAW the new filter will result in a more pleasant

  • Vorbis comment problems

    Basically I have all my mp3s as vorbis, all using comments vorbis files. Most plays well, however, some are not, due to a specific comment on them. For example, output a file of vorbiscomment is the following: david@david-laptop-ubuntu:~/Desktop/Conv

  • Newbie Qustions

    I just got a project which includes the installation and configuration of devices IPS-4240. I used the IPS modules in the ASA devices in the past, but the dedicated devices are new for me. So I really have a few basic questions 1 are these devices pu

  • Upgrade from Vista to Windows 7 and my Officejet L7780 will not scan (no scan options) displayed?

    I've recently upgraded from Vista to Windows 7 now my Officejet Pro L7780 will not scan.  No scan option does not appear, anyone having this problem and do you have a fix for this problem.