tab control

Similar Questions

• Tab control acts like it is off but no

  I have a tab control that has ceased to operate at run time. It acts like it is off when turned on. At the time of editing, I am able to click on the tabs and they change visually. When I run it, by clicking on the tabs does not change tabs.   I reduced the vi to a simple loop with a delay of 200ms and the tab, with nothing else. The controls on the tab is the only thing in vi.  I made sure that the tab is enabled in the Properties dialog box. I noticed a strange thing: the Navigation tab button (in properties), it is all grayed out.  Once again, the control tab in in fact active, but it behaves as if it was not. I tried to recompile. Is there another setting? Why key naviation is grayed out? I'm using LabVIEW 2015.  Thank you!

  

  Ooops! Problem solved. I did somehow accidentally changed to a flag! Sorry for the premature post.

• Resize the object inside the tab control

  Hello

  I have problems with the design of a user interface. I need to have multiple controls resize with panel inside a tab control.

  I see it right, there is no way to have a resize done inside a tab with decorations control that separates controls?

  I have not yet checked LabVIEW 2013.

  I have attached a vi in LV2012 as an example.

  Thanks in advance.

  Yes it is a feature I've wanted also over the years.  Here's the first result that I got from the exchange of idea, but I think that there are duplicates autour.

  http://forums.NI.com/T5/LabVIEW-idea-exchange/ability-to-fit-scale-object-within-tab-control-page/ID...

  Basically, you can't do nativly but you can trick it work for you.  You make a tab that is false the user interacts with, changes to the value of another tab that things in it and then you fix every thing you want it is in the tab where it is demonstrated.  This works well if the thing in your tab is an element able to evolve to adapt to it, but if in a tab, you have a chart and another you have a bunch of buttons that should not change, then you will get a strange behavior.  You can tell the chart is more scope to this component, but then you lose the 'ladder while resizing objects' that make a lot more native user interface research.

• Tab control: chart automatically resets when I switch between tabs

  Hello world

  I'm having a problem with a user interface. : mansad:

  I use a tab with two tabs control to switch between the two graphs. A graph shows data from a production machine (tab 1), the other a data from a measuring probe (table 2). Now, when I switch from tab to tab 2 1 and return, graphic of tab 1 is empty and begins to show the data from the moment of return too tab 1. Tab 2 data are not reset, but are constantly updated, even when the 1 tab is open. I'd like to tab 1 to behave like tab 2. It must be constantly updated even when tab 2 is opened and the data should not be reset after between tabs.

  Making machine is connected via a server (Data tab 1, Figure 1), the data from the probe are written a queue and comes from (Data tab 2, Figure 2). It's all part of the main VI. This part is shown in Picture 3. Here, historical data are reset to zero when the program ends. But I can't understand why it does not work as I want.

  Can anyone help?

  Thank you!

  

  OK, there are very strange things happening here, in addition to the problem you are having (which, I admit, I don't see yet why you have a problem).

  First of all, I've never met such a structure of strange and deeply nested directory for LabVIEW code as what you posted: Users\AB\BC\CD\DE\EF\FG\GH\HI\IJ\.  Why in the world you have an empty stack of sense files / directories to go?  Very, very strange.

  You view multiple charts using waveform graphs.  Do you, indeed, assemble an array of waveforms to display on the chart, but the waveform consists of a single point, 'built' in a table, with a current timestamp as t0.  Instead of going to all these efforts, you can simply group your data points in a Cluster and show that.  Your X axis will not display "Time now", but if you know the sampling frequency, you can adjust the X scale so it displays 'Time' in practical (such as seconds) since the beginning of the sampling units.  Note that you already have one such cluster (at least in the reading process data - the data output Process value - which can be connected directly on the diagram of fluid bed without the need of the Signalverlaufsdiagramm).  It could, in fact, "fix" your problem (but I'll let you test this).  You will need to do a similar Cluster Bundle in sight Parsum data and output the cluster instead of the table in order to test this idea.

  Bob Schor

• Inexplicable delay between the evolution of the tab control pages

  Hello dear OR Forum.

  I have a strange problem.

  In my program, I use a tab control.

  On a change in the pages of pc immediately once the user clicks on the other page, but on another pc it is delayed (approx. 1 second) until the new page is displayed. The rest of the program works with the same "speed".

  You have an idea why this happens?

  The main program includes a while loop with a delay of 25ms. In the loop, there is a case structure, cases are different pages of the tab control.

  (it's the same exe file)

  Thank you.

  Alex

  Tabs changing pages require a screen refresh if at least the graphics adapters could make all the difference.

  More memory in the faster machine...

  The slow mahcine there a virus check or other processes that use CPU?

  Ben

• Create a journal in the tab control tab and create tab is disabled and grayed out

  Hello

  Can you helpme to solve my question about the connection in the tab control? So basically I have two pages in a tab control, page 1 contains, log in as user name, password, and login button and second page is nothing. After the user has entered the correct user name and password in the form of a string, page 1 will be disabled and grayed out and automatically will be on page 2? I also download the vi that I created and please correct me if I have a problem with my vi.

  Please help me with this ASAP, because I have assignment based on the view of any customer lab server.

  Thank you

  
  

• Tab control + Vi script problem

  Hello

  I have a tab control in my sub vi, which in turn has a secondary (let say sp) now I have an another vi which must be loaded in the secondary of the tab. But I get an error message saying invalid reference vi in insert vi. Opening a vi reference in Panel tab gives this error.

  

  I understand where I was wrong. I close the reference Vi before even that I am trying to load it in high school.

• Customizing a tab control

  Hi all

  I am trying customize appearances of controls for my application and have been involved in some of the custom themes user interface on the Web site of NOR.

  I am now stuck in the tab control - when I open up the control editor and add a tab control and then go to 'Customize Mode', I'm not able to get the typical menu if I right click on the tab control. The typical menu for other controls include options for "Import picture from the Clipboard", "Import a file", etc.

  After that I watched the themes custom user interface on the site NOR even once, as themetal Themeand OR themeand realize, they do not have the tab control so.

  A search of the forums also revealed a thread here, dating from a few years back, about not be able to use the tab control in a custom control.

  So my quesstion is, the tab control still not able to be used as a custom control? And is there a solution?

  Best regards

  Victor

  It works fine for me in 2011.

  The method I use is to drop the tab on the front panel control.

  Make it a typedef

  Click EDIT > IMPORT the IMAGE TO the Clipboard

  Import the image we want for the tab

  Then right-click on the tab of interest

  ADVANCED > LAYOUT TAB > IMAGE ONLY

  Then right click on the new tab

  ADVANCED > LAYOUT TAB > IMPORT THE IMAGE TO THE CLIPBOARD

  If this method does not work for you, please let me know and I'll see if I can get access to a 2010 machine to try it myself.

  Kind regards

  Steve

• Tab control bugzilla

  Need help

  Why don't the tab nr 6 disipear when I leave page 2 or 3, but it did the opposite back.

  Continue in your original thread.  http://forums.NI.com/T5/LabVIEW/tab-controling-tab/TD-p/1971875

• does not by default the tab control in LabVIEW 2009

  I have a tab control in my LabVIEW program. I put the default value of the three page tab control. In older versions of LabVIEW, when the program opens, it opens with the display of page three. Prefect! But now in LabVIEW 2009, it opens to 1 page view. I tried to adjust the default time and again, but it is enough to open with the display of page three. Looks like it's broken in LabVIEW 2009. (I know that I can get around that, but apparently botched when the program opens on page 1 and jerks on on page three.) And change the order of pages would break the code. I don't do that.)

  To make the solution more smooth, you can uncheck see the façade when called property of vi and show it programatically after that you put on page 3.

  Felix

• typedef enum typedef to the tab control

  I have a typedef enum that defines that the DUT is for my automated test device. This enumeration is used everywhere in my code to determine which tests to run and how to interpret the results, etc. I also have a (much indicator tab to be precise) typedef tab control that has a page for each of the ESA with various indicators for each test that will be carried out on it must HAVE specific.

  I would use the typedef enum to select which page of the tab indicator to display. I am able to do it with brute force just a U32 converter like this:

  

  But would prefer to (because of my anality) eliminate dotting ugly coercian red (and depending on the size of the code, all memory that I can save help too).

  I tried many things, and none seems not to work. In this way, using a type cast, does not work.

  

  And not that this using variants (although it works with this little piece of the code example, maybe because my test set-up is an executable?):

  

  With the variant version, my test fixture survey an error 91 indicating data types is not compatible.

  Anyone has an idea how to convert between these two without which dot ugly coercian?

  Why not write a little VI with Enum entry and exit of the tab? It should be just a case internally structure. You can do the small icon so it does not much more space than the U32 conversion.

  Lynn

• Change of name of tab control

  In my application, I use tab control.

  Then, adding the response of Ben64, we get:

  

• tab control refnum

  Hello

  In my front, I have a tabs containg control 6 with waveform graph, I have a graphic button to copy on the façade that exports waveform image. My requirement is that I want to export the image of the tab currently open with waveform graph. Image export is carried out in a separate vi, so my only option is to move the reference of the tab control in that vi. I thought to use a structure of housing with each each page of the tab control to process the files. Does anyone have an idea how do business structure according to manage each page tab control?

  
  

• Tab control tab

  My goal is more

  When I press the tab A tab control test, the B tab should disepear in the test tab control and only the tab should be visible in the control tab of test2 (not grayed out). The same thing can happen when B are pressed, wil say will be visible only.

  In other words, I want to use a tab control to control other tabs visible tabcontrols

  Problem solved here.

  (Do not create another new thread on the same topic.  He loses popular time because you do not give them the advantage of seeing what happened on the issue already.)

• Problems with the help of control Edit Expression with tab control

  Hi all

  I am facing a strange problem when using Expression Edit Control with a tab control.

  When I put the Expression of the RichEdit controls on several tabs in a tab control, and when I run the application, the Expression Edit controls in a single tab are visible, others get invisible! I do NOTHING with them, but they do not simply show upward!

  I first faced this problem using Expr editing controls in Visual Studio c#. NET - with tab controls. For verification, I created a simple VI is LabVIEW to see if the problem is with my request / problem with Expression Edit controls in c#, etc. But voila!  A similar behavior in LabVIEW too! 

  I'm doing something wrong? OR do not do something right? Ask someone for help please ASAP!

  Thanks a ton in advance!

  DASI

  PS: Attached the VI here (LabVIEW 8.5) just download and run it, and you will see probably what I'm talking about!