Tabelt stuck on boot logo

Similar Questions

• Compaq presario sr5518f: computer stuck on boot logo screen

  I just put in a 2nd inside the hard drive and now it gets stuck on boot logo screen I have disable reboot it 1 - 2 times before the beginning of the right way, any help would be great

  Hello @njchuck76,

  I understand that your desktop computer is stuck on boot logo screen after the installation of a secondary hard drive, and I'd be happy to help you in this case!

  To make sure that your system is booting of the operating system drive, I recommend that you follow the steps described in this document on the configuration of the Boot in the BIOS system order.

  If your computer is still not able to boot into Windows after making sure the boot order is appropriate, I suggest following this resource on the computer does not (Windows 8). This should help with running hardware diagnostics.

  If the problem persists after you complete all the steps listed above, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Windows 8 taking 30 minutes to start/restart and stuck on boot logo.

  Hi all... I am back... And I'm getting sick of windows 8. . _ I don't know I had so many questions on my old laptop to windows 7.

  Well, it's not my laptop, but one sister. As you can read in the title, I have extremely long startup time. On normal boot, it is very rare, but sometimes they come. But every restart taking so long... Finally, with a day spent on the research and try to fix I just do a factory reset. Everything went well, it worked normal again. I tried a few reboots and normal shutdown and boot, and it worked! I was so happy because it was so persistent on... But then I tried windows updates, and then the window crashed-_-. Jesus, I was so angry with this laptop... Windows Update did not turn on more... Not even when I restarted the laptop... Then I searched the Internet again and I found something on youtube on the removal of cache, I did and then it worked again. Once again the was happy... But then... "Update of Windows is up-to-date, even windows update update some time and blah blah blah..". I thought: good O_o... So I said OK and it updated and it comes, he wanted to restart and again, reboot takes FOREVER. It is always reboot and it's nearly 30 minutes... And btw, before the reset, it would not start without to hold the power button and then start again and wait for 30 minutes, but I don't want to turn it off like this... And now I am so angry and I don't know what to do... Maybe it's a hardware problem... ? Or a bad update... ? Or is it just bad karma... I have a lot of homework so school and now I have to fix a laptop... I hope someone can help, I'm getting headaches of windows 8: (.)

  Thanks in advance!

  Serge

  Hello

  You are welcome... I hope that things continue to work properly...

  From what you describe you may have a problem with your HARD drive...

  When the machine is functional, you can consider creating some recovery support your computer will provide, if you have not already... If in fact it is a problem of HARD drive and it fails, you won't be is no longer able to do the reset of the built-in...

• Dell XPS 15 9530 Boot stuck at the logo

  Hello

  I have a Dell XPS 15 9530 with only 10 of Windows installed. After a simple reboot that I noticed that the boot process has started taking a long time (> 5 minutes), but in the end, Windows starts correctly and evertything worked well. I run the diagnostic test and no error is returned.

  Then I tried to restore the BIOS to defaults setting and now the trunk seems to take more time, I'm still waiting for 30 minutes ago.

  The boot process stuck at the point where the Dell logo is visible (I think until all treated windows starts). It's the same thing if I try to enter the parameters of WOOD, so for now I'm not able to access the settings. I don't really know what to do.

  If you have any suggestions, help me a lot :)

  Start by pressing F12 at startup until a start menu appears - start the Dell diagnostics and run a test lying on the system, in particular the disk of hard/SS.

• iPhone 5 stuck in boot loop

  Hey everybody, I recently encountered a problem where I replaced one of my friend 5 iPhone battery and when I plugged it in to charge that he was stuck in a boot loop cycle. The Apple logo appear and disappear over and over again and never start.  I then read a lot of forums where people have had the same problem and tried a lot of things.  I even tried to put several other types of accumulators in the farm of origin, including, and none of them would allow the phone to initialize.

  I solved this problem by putting the iPhone in recovery mode where then iTunes could recognize.  I then did the update (not recovery) that was available, because do not get rid of all the data on the phone.

  I got a weird error that doesn't seem the case on internet "iTunes unable to connect to the iPhone. The value is missing.

  

  But the update worked!  Then I later discovered that my friend tried to update his phone when he died (battery was flakey, so why I replaced it).

  So if someone has ever an update failed and an iPhone stuck in a boot loop, just put in recovery mode and update the firmware from iTunes.

• screen stuck on the logo of apple during the forced reset

  I bought an iPhone 6s + 16 gb.its iOS version was 9.1

  during the update iOS through the phone, the screen turns black but tithe.

  nothing start reset forced up.with (sleep + "home" button), stuck on the apple logo and nothing starts.

  What should I do?

  Thank you.

  I try again the forced reboot, but if it fails the second time, try putting the phone into recovery mode.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• U410 stuck in boot loop

  Greetings everyone,

  Recently I bought a u410 and it worked great for a few weeks, but this morning instead of waking from hibernation as usual, it seems to be stuck in a loop to display the lenovo logo then a white screen with a few seconds on each. It worked continuously for hours while I try to run down the battery in an attempt to reset. I have no bios access during the loop, and it does not start on a usb media. I am now, I wondered what I would do because he has already given migrated my old machine and that you not exactly want to start over. Is there something that can be done otherwise than returning or sending to lenovo support?

  No white dots, has not even come to that. I solved it earlier today and it turns out it was a corrupted hibernation file which was causing the problem. Who removed and all was good. Thanks for the reply if it could be useful in the future for myself or others fall on this thresd.

• Y410P stuck in boot loop 'prepare auto repair.

  Hello

  Unfortunately, I woke up this morning to my Y410P stuck with the Lenovo logo and text saying "prepare auto repair. After a few moments, it will say "Diagnose your PC" and then "repair disk errors. It could take more than an hour to finish. "Edit: then after a few seconds, it restarts and everything happens again.

  As you can imagine I am very satisfied with this and I have no idea what may have caused it. I am currently studying in Belgium so no help here I can get will be greatly appreciated.

  Thanks in advance!

  
  

• Stuck Installing boot camp software support on Windows 10 for Mac Pro mid-2014

  Hello world.

  I have a mac pro mid-2014.

  I installed windows 7 using boot camp and all worked fine

  But my SSD has had some problems so I took it to the shop they replaced the SSD.

  SO now I have a blank disc. I restored time machine (I deleted the windows partition when I back up)

  now, I have just a single partition being original, I started to install Windows 10 by boot camp as usual. every thing works,

  created the USB (I used a disk portable 1 TB, I bought recently), downloaded software and then prompted me to make the partition.

  subsequently handed over running and starts the installation. window has installed fine and started, the boot camp installation window pops up and I click Next.

  now, he will be always stuck to the point trying to install realtek audio.

  no progress, no error report. I had to close the installation later, may not close properly due, try force end it.

  have tried mnay times, tried windows 10 business and education. they are all stuck at the same point

  I don't see how I was wrong.

  someone at - it had the same question or idea on how I can fix this?

  Thanks a lot in advance, really frustrating one simple thing I had tried two days after work. ;(

  Please see Bootcamp 6.0 driver install interrupted .

• Aspire One stuck in boot loop eRecovery. Stuck reboot Acer "Pls wait the moment" scrn

  I need to stop the boot netbook in eRecovery.  I just want to start Windows.

  I can get into BIOS and boot from the XP software CD.

  I tried to repair and reinstall, but every restart remains stuck in the loop to start eRecovery - screen Win XP, then black start Acer eRecovery and Acer screen screen "Please wait a moment..." ", then restarts - back in the same loop - aqua color forever... I searched the Internet for solutions and found nothing.

  I just want to stop eRecovery and restart windows, the files are still there.

  You can try to use a program called PTEDIT.

  you need a floppy disk bootable with her BACK on.

  Start in PTEDIT and set the second partition bootable (change the second colum to 80) and the type 07

  Change the types of the first and the third partition to format BACK not as OC.

  I don't remember the exact type that must be configured so it can stop work to restore function.

• Moved from HARD drive on computer newest and stuck in boot loop

  My old Dell computer died.  I moved my drive to a newer Dell computer. I'm stuck in a boot loop when I turn on.  I guess I need to repair or reinstall my windows XP to the new motherboard.  I upgraded from 95-98-XP over the years.  My XP upgrade disk is not bootable.  How to repair or reinstall Windows XP?  I do not think that re-formatting in FAT32, 95 installation, the upgrade to 98, and then upgrade to XP and NTFS formatting are a good answer.

  I have a XP Home edition boot disk (Dell) from the original HARD disk in the most recent computer.  I am able to use it and enter the recovery console, but don't know if I can do something here to repair the installation of XP Pro.

  Thank you

  If your Windows XP upgrade disk is not in Service Pack 3 (SP3), and then create a slipstreamed XP version which includes SP3 and then try to install it.

  Create a "Slipstreamed" of integrating XP SP3 version
  AutoStreamer, it is easy to use and for the most part explicit.
  After you create the CD then do a "clean install", see the last part
  My response.

  Guide auto Streamer and Download Sites:
  http://www.simplyguides.NET/guides/using_autostreamer/using_autostreamer.shtml
  http://fileforum.betanews.com/detail/1092632287/1

  Where to download SP3
  (This file that will be used to created the slipstreamed CD)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  Create a version Slip Stream of Windows XP with SP3
  http://www.webtree.ca/WindowsXP/slipstream.htm  (With the help of AutoStreamer)
  http://www.theeldergeek.com/slipstreamed_xpsp3_cd_final.htm
  http://www.winsupersite.com/showcase/xpsp3_slipstream.asp

  You create the slipstreamed CD will not include specific drivers
  for your motherboard, video, audio, network, etc...  Those who you will be
  need to download to your PC or motherboard manufacturing
  Web site.

  How to do a clean install of Windows XP
  Start by changing the BIOS setting to start from the CD drive first.
  Then see below:

  Michael Steven: http://www.michaelstevenstech.com/cleanxpinstall.html
  more information: http://windowsxp.mvps.org/XPClean.htm
  and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm
  also: http://www.bootdisk.com/

  How to optimize your chances of Windows XP SP3 Setup successfully:
  http://www.PAGESTART.com/windowsxpsp3p3pg8.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Tablet stuck in boot loop

  I have a Dell 10 5055 place tablet.

  I had windows 10 on it since I have the Tablet and never had any problems until today. A couple of months I have reset back there and it works beautifully. I have reset this morning only to find it in a boot loop where it shows the dell logo and then flashes an error and restarts. The error is "reboot system to make adjustments tpm2 indeed"

  I tried to plug and unplug. I even tried to press the volume up, which highlights the F12 boot menu, it displays the same error and restarts. I tried to go into the bios with the same question. I tried to hold the volume up and volume down to go into recovery mode and it displays a loading bar. After a few seconds it flashes the error and restarts. Not sure how he has adjusted very well a few months until this morning when my warranty has expired recently. I tried to contact support, and they said it would be $ 150 to get which is sent to them that they can fix. For $130, I can buy a used one online. If I knew I would get this issue I would not have reset. Don't know why and what could be the cause.

  Note this thread for anyone watching one.

  The poster has another thread on this problem, on the plateau Mobile Devices, which is a better place for discussion rather than here on the sound card from the laptop.

• Palm Pre stuck at the logo

  I had my pre for about two months and the other day, arbitrarily, it restarts and is now unable to boot the system completely; It crashes just in the 'Palm' logo indefinitely.  I have reset many times, both through the switch and the battery, and it has made no difference.  I can't use the webOS doctor, either, because my computer does not recognize the frozen pre.  I was hoping that the problem could be resolved without having to replace the phone entirely.  Any help would be appreciated!

  OK, try this:

  1. plug the USB cable and charger, charger inserted.

  2 remove the battery from the front.

  3. press and hold the button of volume up to off on the side.

  4. replace the battery in the meadow.

  5. Insert the USB cable to the front. (should see a big USB logo on the screen)

  6. release the volume up button now.

  7. install webOS doctor of Palm.com/ROM.

  8. connect the USB cable to the PC and pre when the webOS doctor invites to do.

  9 shot after when the possibility and let it do its magic.

  Lets see how that fairs.

• WebLogic server 12.11 is stuck in boot mode

  When I start the server Weblogic 12.11 stuck in START mode. I was working fine until I tried to deploy a WAR file. It never completed the deployment even after several minutes. Since then, whenever I type "startWebLogic.cmd' to cmd prompt, I get the following result, and it gets stuck at the START-UP stage.  Content of my Domain/servers/Adminserver/logs/adminserver.log is posted more far 7 October 2014 23:14:24 weblogic.jaxrs.server.portable.servlet.JerseyServletCon ainerInitializer onStartup INFO: number of JAX - RS to examine specific classes: 3 October 7, 2014 23:14:24 weblogic.jaxrs.server.portable.servlet.JerseyServletCon ainerInitializer onStartup WARNING: the servlet weblogic.wsee.wstx.wsat.v11.endpoint.ParticipantPortImpl I registered for the treatment of the information. In the file web.xml, the application must explicitl registry servlet com.sun.jersey.spi.container.servlet.ServletContainer in orde to manage queries against a specific mapping uri for JAX - RS. For example), you can reg ster servlet above with / Jersey / * * content of my Domain/servers/Adminserver/logs/adminserver.log is shown below: Please tell us what might be the problem as admin console came well before my first installation attempt. awt. Toolkit = sun.awt.windows.WToolkit file.encoding = Cp1252 file.separator = sun.io = file.encoding.pkg-java.awt.graphicsenv = sun.awt.Win32GraphicsEnvironment java.awt.printerjob = sun.awt.windows.WPrinterJob java.class.path = M:\Personal\Oracle\MIDDLE~2\patch_wls1211\profiles\default\sys_manifest_classpath\weblogic_patch.jar; M:\Personal\Oracle\MIDDLE~2\patch_ocp371\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\PF\jdk16075\lib\tools.jar; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\lib\weblogic_sp.jar; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\lib\weblogic.jar; M:\Personal\Oracle\MIDDLE~2\modules\features\weblogic. Server.modules_12.1.1.0.jar; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\lib\webservices.jar; M:\Personal\Oracle\MIDDLE~2\modules\ORGAPA~1.1/lib/Ant-all.jar; M:\Personal\Oracle\MIDDLE~2\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\common\derby\lib\derbyclient.jar; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\lib\xqrl.jar; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\common\derby\lib\derbyclient.jar; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\lib\xqrl.jar java.class.version is 50.0 java.endorsed.dirs = C:\PF\jdk16075/jre/lib/endorsed;. M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1/endorsed java.ext.dirs = C:\PF\jdk16075\jre\lib\ext; C:\windows\Sun\Java\lib\ext java.home is java.io.tmpdir java.library.path = C:\PF\jdk16075\bin C:\Users\grao10\AppData\Local\Temp\ = C:\PF\jdk16075\jre;. C:\windows\Sun\Java\bin; C:\Windows\System32; C:\Windows; M:\Personal\Oracle\MIDDLE~2\patch_wls1211\profiles\default\native; M:\Personal\Oracle\MIDDLE~2\patch_ocp371\profiles\default\native; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\native\win\x64; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\bin; M:\Personal\Oracle\MIDDLE~2\modules\ORGAPA~1.1\Bin; C:\PF\jdk16075\jre\bin; C:\PF\jdk16075\bin; M:\Personal\Oracle\MIDDLE~2\patch_wls1211\profiles\default\native; M:\Personal\Oracle\MIDDLE~2\patch_ocp371\profiles\default\native; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\native\win\x64; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\bin; M:\Personal\Oracle\MIDDLE~2\modules\ORGAPA~1.1\Bin; C:\PF\jdk16075\jre\bin; C:\PF\jdk16075\bin;c:\apps\oracle\clients\112_32\bin; C:\Windows\System32; C:\Windows; C:\windows\System32\Wbem; C:\windows\System32\WindowsPowerShell\v1.0\;c:\Program files\CSSystem; c:\Program files (x 86) \CSSystem;c:\util\iDesktop\tools\; C:\Program Files (x86)\Java\jre1.6.0_45\bin\client; C:\Program Files (x86)\Java\jre1.6.0_45\bin; C:\Program Files\Gemalto\Access Client\v5\. C:\Program Files (x 86) \Gemalto\Access Client\v5\; C:\Program Files (x 86) \Enterprise Vault\EVClient\; C:\Program Files (x 86) \Citrix\ICAService\; C:\Program Files (x 86) \Citrix\System32\; C:\Program Files (x 86) \Microsoft customer Application Virtualization Client; C:\Program Files\Sybase\IQ-15_4\Bin64; C:\Program Files\Sybase\IQ-15_4\Bin32; C:\Program Files\Sybase\DataAccess64\ADONET\dll; C:\Program Files\Sybase\DataAccess\ADONET\dll; C:\Program Files\Sybase\DataAccess64\ODBC\dll; C:\Program Files\Sybase\DataAccess\ODBC\dll; C:\Program Files\Sybase\DataAccess64\OLEDB\dll; C:\Program Files\Sybase\DataAccess\OLEDB\dll; C:\Program Files\Sybase\OCS-15_0\lib3p64; C:\Program Files\Sybase\OCS-15_0\lib3p; C:\Program Files\Sybase\OCS-15_0\dll; C:\Program Files\Sybase\OCS-15_0\bin; C:\windows\SysWOW64\; C:\windows\SysWOW64\Wbem; C:\windows\SysWOW64\WindowsPowerShell\v1.0; C:\Program Files (x 86) \IBM\SQLLIB\BIN; C:\Program Files (x 86) \IBM\SQLLIB\FUNCTION; C:\Program Files (x 86) \IBM\SQLLIB\SAMPLES\REPL; C:\Program Files (x86)\EMS\4.4.3\clients\c\bin; C:\Program Files (x86)\EMS\6.0.1\clients\c\bin; C:\Program Files (x 86) \SSH Communications Security\SSH Tectia\SSH Tectia to THE. C:\Program Files (x 86) \SSH Communications Security\SSH Tectia\SSH Tectia AUX\Support binary files; C:\Program Files (x 86) \SSH Communications Security\SSH Tectia\SSH Tectia broker; C:\Program Files (x 86) \SSH Communications Security\SSH Tectia\SSH Tectia Client; C:\Program Files (x 86) \Informatica\PowerCenter_951_ DTACC\CLIENTS\tools\datadirect; C:\Program Files (x 86) \MOVEit; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\native\win\x64\oci920_8; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\native\win\x64\oci920_8;. Java.naming.Factory.initial = weblogic.jndi.WLInitialContextFactory java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url java.protocol.handler.pkgs = weblogic.net java.runtime.name = Java (TM) SE Runtime Environment java.runtime.version = 1.6.0_75 - b13 java.security.policy = M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server\lib\weblogic.policy java.specification.name = java.specification.vendor of the specification of the API Java Platform = Sun Microsystems Inc.. Java.specification.version = 1.6 java.vendor = Sun Microsystems Inc. Java.Vendor.URL = http://java.sun.com/ java.vendor.url.bug = http://java.sun.com/cgi-bin/bugreport.cgi = 1.6.0_75 java.vm.info = mode java.version mixed java.vm.name = Java hotspot Server VM java.vm.specification.name 64 = specification of Machine Java virtual java.vm.specification.vendor = Sun Microsystems Inc. java.vm.specification.version = 1.0 java.vm.vendor = Sun Microsystems Inc. java.vm.version = 20, 75 - b01 javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB org.omg.CORBA.ORBSingletonClass =. weblogic.corba.orb.ORB = amd64 os.name = Windows 7 os.version = 6.1 os.arch Path.Separator =; Platform.Home = M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1 sun.arch.data.model is 64 sun.boot.class.path = M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1/endorsed\javax-xml-bind.jar;. M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1/endorsed\javax-XML-WS.jar; M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1/endorsed\jsr250-API.jar; C:\PF\jdk16075\jre\lib\resources.jar; C:\PF\jdk16075\jre\lib\rt.jar; C:\PF\jdk16075\jre\lib\sunrsasign.jar; C:\PF\jdk16075\jre\lib\jsse.jar; C:\PF\jdk16075\jre\lib\jce.jar; C:\PF\jdk16075\jre\lib\charsets.jar; C:\PF\jdk16075\jre\lib\modules\jdk. Boot.jar; C:\PF\jdk16075\jre\classes sun.boot.library.path = C:\PF\jdk16075\jre\bin sun.cpu.endian is small sun.cpu.isalist = amd64 sun.desktop = windows sun.io.unicode.encoding = UnicodeLittle sun.java.command = weblogic. Server sun.java.launcher = SUN_STANDARD sun.jnu.encoding = Cp1252 sun.management.compiler = HotSpot 64-bit Tiered compilers sun.os.patch.level = Service Pack 1 user.country = US user.dir = M:\Personal\Oracle\Middleware1\user_projects\domains\Guru_base_domain1 user.home = \\NNYC11p20006\grao10$ = en user.name = grao10 = America/New_York vde.home user.timezone user.language = M:\Personal\Oracle\Middleware1\user_projects\domains\Guru_base_domain1\servers\Guru_AdminServer1\data\ldap weblogic. Name = Guru_AdminServer1 weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor weblogic.ext.dirs = M:\Personal\Oracle\MIDDLE~2\patch_wls1211\profiles\default\sysext_manifest_classpath; M:\Personal\Oracle\MIDDLE~2\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.home = M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server weblogic.management.discover = true wls.home = M:\Personal\Oracle\MIDDLE~2\WLSERV~1.1\server. > # <><><># <><><># <><><># <><><># <><><># <><><># <><><># <><><># <><><># <><><># <><><># <><><># <><><># < > <><># <><><>

  Please, try the following.

  (1) delete the content of $DOMAIN_HOME/servers / $SERVER_NAME / data /.

  The LDAP directory usually causes problems. If you delete the contents of the data directory, and then also to clean the directory tmp and cache content. If all goes well, you should be good.

  Thank you!

• iPad 3 stuck load (No. Logo Apple)

  Hello

  After my iPad use does not a few months, I've tried to load, the battery was empty and it wouldn't load. So I let it charge for 17 hours, it has not yet load a little (I guess). And the screens only two I can get these two.

  I tried to force in recovery mode, I tried to turn it on. Nothing works, it connects to iTunes, I can not even the Apple logo.

  Please help me this old guy to fixing...

  Thank you!

  

  

  How old is the iPad? And have you tried to use another charger