Table, a modified cell reference

I'm curious to know if I am missing something, or if someone has an eligant way more to capture the last cell changed in a table...

I thought that this would be an easy value change event by using either the ActiveCell > CellPosition node or the EditPos.  However, I found various problems with the click of the mouse / key press combinations.  The position of the cell doesn't seem to be correct (almost as if there was a lag).  The position of change was correct when entering text, but as soon as a mouse click/tab/return/enter event has occurred, the position of change changed into the new cell.  Then I noticed that the value change event seemed to happen after my key down or mouse click events (although I have not checked if that had to do with the order of my structure of events).

So I think that I came up with a rather convoluted--despite all the success - method to achieve my goal.  I had to enter a reference to the bunch of rows/columns with the button down event (while ignoring the pressures on the Tab/Enter/Return keys).  Then I used this reference to set an active cell on a value change event.  In this way, just run the code more in depth once.  This efficiency will be more important when executing sequences more involved with a cell change.

I always did like that:

Compare OldVal, NewVal. For each cell does not output the coordinates of this cell. You can use these coordinates to define the active cell, if you wish. It's the value change event if this happens only when you change the value in the table, not when the mouse clicks. Is that what you are looking for?

Tags: NI Software

Similar Questions

  • After a sort cell reference problem

    Hello

    I've never used excel or numbers before but I now have, so my problem would come more trivial to most of you.

    Please bare with me:

    I do a sheet inventory and cost and a few sheets of recipes that refer to the old (inventory)

    I want to multiply say the amount of necessary thyme in my recipe by its cost unit I keep in the inventory cards (I can then modify next change of market prices). Everything works well, but once I have start the sorting inventory cards, cell references are messed up that they remain locked up giving a result based on the new item which is now on this line, instead of after the sorting and always give me the calculation related to the unit cost of thyme.

    Thank you much for the help!

    So far, the results are what I was looking for, but

    say I have sort products by names (or any kind of sorting)

    the formula now references the cost of yuzu that ended instead of the wheat toast all the

    I just thought he would follow the sorting and still give me the cost of the toast.

    Hi YLWT,

    I had a few difficulties to read on your screen shots, because they understood the entire screen and were reduced in size and resolution when it is inserted here.

    To take a picture of PART of the screen:

    • Place the mouse pointer in the upper-left corner of the area you want to include.
    • Press shift-command-4 (the tip will change to a focus)
    • Press the mouse button and drag a selection box to reach the area that you want to include.
    • Release the button.
    • The screenshot will be saved to a file .png on your desktop with the name "screen shot to date at the time.png '.

    As can be seen below, the result, dragged here or inserted using the camera above composition window icon, is much easier to read.

    I did partial copies of one of the dinner tables and the table of the inventory, including only data (composed for the unit price) to the question in the present case. Table 1 gives the meal table, Table 2 is the inventory table. The formula is displayed in the editor, the first table below.

    The first part of the formula is a switch that removes the calculation on this line if no entry is made in column C (quantity). When an entry has been made, IF passes control to the party from C x...

    VLOOKUP Gets the search for value in column A of table 1, the search in the left column of the table (columns A to D of table 2) and returns the value in the same row of column 10 as she concludes the research-for value. The returned value is multiplied by the value in column C (table 1), and the result placed in the cells that contain the formula.

    That the formula does not rely on the reference to a specific cell, it will survive a sort of inventory table that place the ingredient (as well as its unit price) in a different line of this table. Example below:

    Copy and paste version of the formula. Note that you need to change "Table 2" in "Table 2::A:J" to match the name of your table in the inventory.

    IF (Len (C) < 1, "", C × VLOOKUP (, 2::A:J Table, 10, FALSE) ")

    Enter the first cell on your dining table where a cost is calculated, then fill until the last cell before the footer line.

    Kind regards

    Barry

  • How to move cells containing formulas without absolute references and maintain cell references

    I know about the selection of the absolute references, etc., but sometimes I'd like to be able to copy a group of cells with formulas and paste elsewhere all retaining the original cell references. For example, several cells with a formula referring to 'A1' continue referring to 'A1' even when I copy the cells elsewhere.

    Is there a change of copy and paste (for example, command + option + C or something?) so that I can copy the same that in Excel, that does not change the cell references when you copy a formula elsewhere?

    Thank you!

    Hi jivejive,

    I am not in anyway you want with a group of cells. I did it with individual cells by copying the function since the Inspector formula and then paste in the Inspector in the new location.

    Quinn

  • use the contents of the cell to a cell reference of formula calculate

    In Apple "Numbers", in order to update a spreadsheet each time that the values are added, I first need to calculate the number of days between the date of first entry and last date, using the COUNTA() method. Gives me the line number of the last entry.  For this I "CONCATENATE" a column letter known to a cell reference.

    Using this cell reference, I would like to know how can I use the contents of the cell to update the information contained in the rest of the worksheet. Is this possible?

    Any help would be appreciated.

    Thanks in advance.

    I have a problem following exactly what you want to do, but think that INDIRECT can help.  More here.

    SG

  • change the first line of a table to a cell style

    Hello

    I want to change the first line of a table to a cell style.

    Is this possible in javascript?

    Patrick

    Hi patrickbcm,

    Try the threshold.

    app.activeDocument.stories.everyItem().tables.everyItem().rows[0].cells.everyItem().appliedCellStyle = app.activeDocument.cellStyles.item("row1");
    

    THX,

    csm_phil

  • PLS-00357: Table, view or unauthorized reference sequence "POC_AD0FFFKMZ6QQ0"

    Hello

    A scheculer to perform the following procedure.
    create or replace procedure GENERATE_LOAD_TYPE (p_module_type in varchar2)
    as
    cursor c is
    select id,view_name
    from   poc_test
    where  view_name='POC_AD0FFFKMZ6QQ0';
    
    
    Begin
    
    for c_rec in c loop
        BEGIN
          DBMS_SCHEDULER.create_job (
            job_name        => c_rec.view_name||'_job',
            job_type        => 'PLSQL_BLOCK',
            job_action      => 'BEGIN POC_LOADER('||c_rec.id||','||c_rec.view_name||'); commit; END;',
            start_date      => SYSTIMESTAMP,
            repeat_interval => 'SYSTIMESTAMP + 365 /* 1 Year */',
            enabled         => TRUE);
        exit;
       END;
       
    end loop;
    
    end;
    
    exec GENERATE_LOAD_TYPE('1');
    
    PL/SQL procedure successfully completed.
    But the task is failed on the following error message:
    select additional_info from DBA_SCHEDULER_JOB_LOG where job_name='POC_AD0FFFKMZ6QQ0_JOB'
    
    
    ORA-06550: line ORA-06550: line 1, column 505:
    PLS-00357: Table,View Or Sequence reference 'POC_AD0FFFKMZ6QQ0' not allowed in this context
    ORA-06550: line 1, column 476:
    PL/SQL: Statement ignored , column :
    The problem is with this line:
      job_action      => 'BEGIN POC_LOADER('||c_rec.id||','||c_rec.view_name||'); commit; END;',
    When I remove the parameters (for example: c_rec.id | ',' | c_rec.view_name) has worked well.
    Please advice.

    Thank you

    Try to change this line

    job_action      => 'BEGIN POC_LOADER('||c_rec.id||','||c_rec.view_name||'); commit; END;',
    

    TO

    job_action      => 'BEGIN POC_LOADER('||c_rec.id||','''||c_rec.view_name||'''); commit; END;',
    

    URS

  • Table table in a cell alignment problem in Firefox

    I have a simple table of 2 cells in an array of 2 cells. All have the value valign = top. But in Firefox and Safari, the content of one cell is shifted down. The problem with the cells in a table that is exposed is in this screenshot. The page with the issue. Find the table with the products and the finger to the right. All must align at the top, but the product is moved down.

    Any ideas? Something escapes me?
    Thank you!

    Osgood wrote:

    > By default, that some tags have padding and margin applied, it is the case
    > with paragraph tags

    . If you don't want any margin or padding to
    > apply you must put it to zero using margin: 0; padding: 0; as below.
    >
    > .header {}
    > do-family: Verdana, Arial, Helvetica, without serif.
    > font size: 1.5em;
    > make-weight: bold;
    > color: #CC6633;
    > margin: 0;
    > padding: 0;
    > }
    >

    Of course ideally you should use tags for headers of these
    will have priority when the search engine spider comes to your site.

    I'd do it

    Products

    Then style the h1 with some css.

    H1 {}
    do-family: Verdana, Arial, Helvetica, without serif.
    font size: 1.5em;
    color: #CC6633;
    margin: 0;
    padding: 0;
    }

  • Can I set a cell reference or a function in the title of my table?

    Is this possible? I tried, but it does not appear to take it. Something like put = TODAY().

    I wish that my title to: Todos "today's date" without needing me to be updated each time.

    Number does not support this.  NC post you your comments to Apple using the menu item "numbers > provide Feedback numbers.

  • The default value of the cell reference to preserve columns and lines in function number 3.6.1

    I use:

    3.6.1 the numbers

    OSX 10.11.1

    For clarity: afterwards, I use the term 'address of the cell' is the name of the Table, the numbers of row and column that is used to specify a particular cell. Please let me know if there is a name for this.

    Am new on numbers and you want to create a database with two tables whose most variables in "Table 2" are determined by entries in 'Table 1' and vice versa. I use the functions to set up these relationships; However, it is not an obvious geographic relationship between the output in table 2 cell address and the address of the entry in table 1 cell, so I want the address of the cell called in any default function to "Preserve line - True" and "Preserve column - True" still, but don't be found anywhere to set this parameter. Is this possible?

    Thank you in advance your help.

    All the best,

    RA

    It is possible that you are trying to do things with numbers for which it is not designed. It's really good at crunching numbers, but this isn't a database program. If you look at the models in file > New in your menu, you will find good examples of use of numbers. To enter formulas usually you don't have to make a lot of seizure of addresses. You type = activate the formula editor, and then click the cell you want to reference. Numbers then inserts the address for you.

    SG

  • Break down and an object of a list/table of the index reference

    TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

    I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

    Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

    What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

    VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

    Any suggestions or advice is greatly appreciated.

    VB code:

    Public Class Form1

    Private PatternGenerator.IPatternGenerator MPG

    Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

    TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

    TSEngine.Settings.SaveMeasurementsToDatabase = False

    TSEngine.Settings.SaveResultsToDatabase = True

    TSEngine.Settings.SerialNumberAllowDuplicates = True

    mPG = TSEngine.CurrentPatternGenerator

    TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

    TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

    TSEngine.InitializeCamera)

    End Sub

    Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

    mTestSequence = New TSEngine.TestSequence (1)

    Dim result as TSEngine.Tests.ResultEnum

    For i As Integer = 0 To mTestSequence.NumberTests

    Dim p As PatternGenerator.Patterns.PatternBase

    p = mTestSequence.CommandList (i). Model

    p.PatternGenerator = mi/gal

    mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

    ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

    p.PatternGenerator = mi/gal

    p.Show)

    result = mTestSequence.RunSingleTest (i)

    Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

    Results (i). Name

    mTestSequence.CommandList (i). ResultMeasurement.

    Next

    End Sub

    Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

    "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

    Change the settings for call .NET

    Parameters not supported

    The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

    In addition, the .NET adapter does not support creating or call methods on generic classes.

    My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.

  • Showing a table as link cell

    Hi friends,

    I have a table with values based on the search criteria entered. One of the cells has now the name of the employee in the table. I want this shown as a link and when the user clicks on the name, it should take me to another page where I display the employee details. How can we show the employee name cell as the link. Can anyone help

    Thank you

    Hi user,

    check this.

    to find out how to use the command link in af:table - columns

    https://blogs.Oracle.com/jdevotnharvest/entry/jdeveloper_11_1_2_command

    to learn how to use redirection

    JDeveloper: Navigation after return from the course of the limited task. JDev & amp; Goodies from the ADF

  • Auto fill a table with text cell

    I'm a long-time FrameMaker user who starts to become familiar with InDesign (CS5.5). I have a question about tables.

    In FrameMaker, I create a table of 2 column 1 row style to create a formatted Note style. The cell on the left uses a paragraph style that contains the Note text: in the field auto-numbering format (see screenshot).

    fm_paragraph_designer.png

    In other words, when I add the table to a document, the text Note: is automatically added, formatted according to the paragraph style.

    I tried the following approach in InDesign:

    I created a new table style (column 2, 1 line)

    I created a style of cell to the cell to the left. This refers to a paragraph style with put it in place in bullets and numbering section.

    ID_paragraph_designer.png

    However, the text "Note:" does not automatically appear in the cell with the left hand, unless I get a letter, number or a character, what beats rather the object. I guess there is a way for InDesign to do what I want, but I just have not found? Pointers appreciated!

    Mark

    Peter Spier says:

    ..  a character style nested within the 1 space that applies color, custom underline and new type size and leading...

    No, attack will not work in this case; you need a bit of vertical offset to get the characters from the bottom of the 'box '. Other than that, it works just dandy, after changing the underlining and rule above up to what all right (values that work for you will be different from mine, because of other policies, the size and leader etc.):

  • Apex 4.0: In the form of table: how to make reference to the elements?

    Hello
    I have a tabular layout with a certain query. A column in the query (say comm, is not displayed. This column is required in the table

    When a new row is added in the form of tables, I want to add a (complex) value for this column hidden by default.

    I want to add a process (before submitting) to the page.
    How can I make reference to this particular point?


    : P23_COMM: =...

    does not work. It is a column in the query, not a page element.

    Any help appreciated.
    Sincere friendships Erik

    Loop over the hidden PK table, identification of the new line (by finding with PK NULL table th eone) and assign the hidden item corresponding

    Assumung 01 is the primary key column table (use firebug to check this) and 05 is the hidden field

    BEGIN
      FOR i IN 1..APEX_APPLICATION.G_F01.COUNT
      LOOP
         --Identify new rows
          IF ( APEX_APPLICATION.G_F01(i) IS NULL ) THEN
              APEX_APPLICATION.G_F05(i)  := 
          END IF;
      END LOOP;
    END;
    
  • Add a table with uneven cell sizes

    Hello

    I want to add tables to the coordinates specified on the page with the various columns that contain a different number of cells of different and unevenly sizes.

    The image below illustrates what I mean.

    ScreenShot069.jpg

    Would be happier if someone can tell me the words so that I can make a thousand images.

    Thank you

    Trevor

    Concerning the different size cells, it is possible other than the use of the merge feature?

    @Trevor:

    No, if you are talking about an ordinary table.
    Of course you can consider tables within cells if you like complicated.

    Uwe

  • Scan of the columns in table for empty cells

    I have prepared a form that will do the following (Please bear with me for the description):

    The form opens with a table of 10 rows.  The user must enter sides (from 0 to 10) in one of the columns in the table.  Once the user enters all the ratings of ten, he or she must then click a button to turn on the rest of the form (which is hidden).  What I'm trying to do is, after the button is clicked, scan the table to ensure that the entire column was filled with a number.  If the column was made, then a second page.  If a cell in the column was left in white, then I want a prompt to appear and indicate to the user which cell is empty.  I was able to run by using the following code:

    This code is under the event 'click '.

    If (decisionMatrix.dMTable.Row4.rating.rawValue is nothing)
    {
    Poster a warning prompt that indicates the form is incomplete

    xfa.host.messageBox ("incomplete form.  Please fill in the background. ","warning ", 3);
    }
    on the other
    {
    Allow the user to save the current state of the form and activate the second part of the form.
    app.execMenuItem ("SaveAs");
    }

    The problem with the above method is that it checks only the Row4 cell.  I have to add more code for the other 9 rows in the table and for each message box, indicating to the user which field to fill.  Is there a better way to do it?  A switch-case perhaps statement?

    I have also considered the column full analysis at a time and just using a message box general for the table, using the following code:

    If (decisionMatrix.dMTable.Row [*].rating.rawValue is nothing)

    {
    Poster a warning prompt that indicates the form is incomplete

    xfa.host.messageBox ("incomplete form.  Please fill all of the scoring. ","warning ", 3);
    }

    ...

    But it doesn't seem to work.  Any help is appreciated.  Thank you.

    The seal contains a table with 10 rows and 3 columns (a_, b_ and c_). The calls button 'Continue' by clicking on the click event, which runs through the table looking for NULL values in each column per row. The "ratingMissing" flag controls the visibility of the page 2.

    Form1.Page1.Subform1.continueBtn::click - (JavaScript, client)

    var ratingMissing = false;

    for (var i = 0; i)< 10;="" i++)="">

    var line = i + 1;

    If (xfa.resolveNode("form1.page1.subform1.table.row["_+_i_+_"].a_").rawValue == null) {}

    xfa.host.messageBox ("A is missing in row"+ row);

    ratingMissing = true;

    }

    If (xfa.resolveNode("form1.page1.subform1.table.row["_+_i_+_"].b_").rawValue == null) {}

    xfa.host.messageBox ("B is not in the line" + row);

    ratingMissing = true;

    }

    If (xfa.resolveNode("form1.page1.subform1.table.row["_+_i_+_"].c_").rawValue == null) {}

    xfa.host.messageBox ("C is missing in the row" + row);

    ratingMissing = true;

    }

    }

    If (ratingMissing == false) {}

    Form1.Page2.presence = "visible";

    }

    else {}

    Form1.Page2.presence = 'hidden ';

    }

    Steve

Maybe you are looking for