Table do not reset in the program between tracks

Similar Questions

• a key for the table does not exist in the table

  Hi guys,.
  
  I imported several tables of physical layer in the administration tool. So, I want to do new foreign key between tables join in the physical schema.
  Required fields for posting a link between these tables are set up. When I press the ok button, an error message is displayed:
  "a key corresponding to the table does not exist in the table blablabla. You want to create a? »
  
  In fact, what is this error? I don't have all the idea about it. The number of the type of the fields is the same, the names are also the same. I think that he should not have problems to make the new foreign key. But why is it happening?
  
  Thank you

  Hello

  It is the primary key of the first table. You might not have set this column as the primary key of this table at the level of the db.

  Thank you
  Imtiaz.

• Changes to the definition that is not reflected in the program using this control type.

  Hello

  I'm having a problem with a type definition, that once I have make changes by adding another element to the enum changes do not appear in the program and the program control is grayed.  I had this problem yesterday, but just decided to remove the type definition file and rebuild a new.  But today when I did change the enum in the program say it is disabled.  I joined the program and the control file.  I wish you to know why I'm having this problem since it seems to happen whenever I make a change to the control.  I am running LabVIEW 2010 on a Dell dimension 2400 using Windows XP with service pack 3 5.1.2600.  I was wondering if LabVIEW 2010 has all the questions running on XP which can cause this kind of problem.

  I tried your program in 2010sp1 and in 2011, and I have no problem. Once you modify the type definition and add items to the enum, the instances will become gray until you 'apply changes' or 'save' the typedef. After that, all instances of the typedef is updated with new items.

• The application is not responding. The program can meet again if you wait. You want to put an end to this process

  Whenever logged on windows 7, I get the following message:

  "The application is not responding.  The program can meet again if you wait.
  Do you want to put an end to this process"with the choice of the end of the process and cancel.
  When I type complete the process the screen shows my wallpaper and not icons or the bar of windows at all. When I hit Cancel, the message of disappears for around one minute and shows up again.
  I can't use my phone at all in this way, so I hope you can help me.
  Sven

  Reboot the PC by using the F8 key at startup, this time select command prompt, and then follow the instructions for restoring the system;

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Start-System-Restore-from-a-command-prompt

  Select a restore point to a period where it was all is OK

• Windows 8 reading list does not work with the programs desktop or web browsers in the Office

  * Original title: playlist of Windows 8

  Hello

  What a waste of time, this app is!

  -"Playlist does not work with programs office or web browsers in the Office! This raises the question: what will work with?

  I wish I knew.

  Thank you

  Chris

  Hi Chris,

  Playlist does not work with the programs office or web browsers in the design office.

  For more information, see the links.

  http://Windows.Microsoft.com/en-us/Windows-8/reading-list-app-FAQ

  http://Windows.Microsoft.com/en-us/Windows-8/share-to-reading-list

  Hope this information helps. If you have any questions, please let us know.

• Contacts are not fed to the program through charger?

  We have activated the program and the charger, and contacts are not entered in the program. Where is the blocking in the Manger and how can we troubleshooting feeder.

  Hi Sheershak,

  The reason behind there can be additional settings that can limit the contacts in a program stream, this includes: assessment the limits of time. and Advanced Options - Assessment Date & additional Restrictions.  These areas have been identified below.  Check these areas to ensure that they are configured correctly.

  Check restrict the time of evolution and advance the option to the power Panel.

  edynamic expert Eloqua

• WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

  Hi, we get this error in an independent ADR on Grizzly implemented.

  August 14, 2014 09:59:05

  oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

  WARNING: The pool_config view or a table has not been found in the schema:

  APEX_LISTENER

  Oracle.dbtools.rt.web.WebErrorResponse 09:59:05 August 14, 2014

  internalError

  GRAVE: JDBCException [kind = NO_DATA]

  JDBCException [kind = NO_DATA]

  defaults.xml "XXXXX" designate removed for safety, front of post

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  < ! DOCTYPE SYSTEM property "http://java.sun.com/dtd/properties.dtd" > ""

  Properties of <>

  < comment > saved on Mon Aug 04 16:25:09 EDT 2014 < / comment >

  < key "cache.caching entry" = > false < / entry >

  < key = "cache.directory entry" > / tmp/apex/cache < / entry >

  < key = "cache.duration entry" > days < / entry >

  < key = "enter cache.expiration" > 7 < / entry >

  < key = "enter cache.maxEntries" > 500 < / entry >

  < key = "enter cache.monitorInterval" 60 > < / entry >

  < key = "cache.procedureNameList" / entry >

  < key = "cache.type entry" > lru < / entry >

  < key = "db.hostname entry" > XXXXXXXXX < / entry >

  < key = "db.password entry" > XXXXXXXXXXX < / entry >

  < key = "db.port entry" > XXXX < / entry >

  < key "db.sid entry" = > XXXXXX < / entry >

  < key "debug.debugger entry" = > false < / entry >

  < key "debug.printDebugToScreen entry" = > false < / entry >

  < key "error.keepErrorMessages entry" = > true < / entry >

  < key = "enter error.maxEntries" > 50 < / entry >

  < enter key = "jdbc. DriverType"> thin < / entry >

  < enter key = "jdbc. InactivityTimeout"1800 > < / entry >

  < enter key = "jdbc. InitialLimit' > 3 < / entry >

  < enter key = "jdbc. MaxConnectionReuseCount"> 1000 < / entry >

  < enter key = "jdbc. MaxLimit' 10 > < / entry >

  < enter key = "jdbc. MaxStatementsLimit' 10 > < / entry >

  < enter key = "jdbc. MinLimit"> 1 < / entry >

  < key = "enter jdbc.statementTimeout" > 900 < / entry >

  < key "log.logging entry" = > false < / entry >

  < key = "enter log.maxEntries" > 50 < / entry >

  < key = "misc.compress" / entry >

  < key = "misc.defaultPage entry" > apex < / entry >

  < key "misc.enableOldFOP entry" = > true < / entry >

  < key "security.disableDefaultExclusionList entry" = > false < / entry >

  < key = "enter security.maxEntries" > 2000 < / entry >

  < / properties >

  Complete log

  August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

  INFO: NOTE:

  Stand-alone mode is designed for use in development and test environments. This not is not supported for use in production environments.

  August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

  INFO: Starting standalone Web container to: / u00/home/oracle/ords/ords

  August 14, 2014 11:28:14 oracle.dbtools.standalone.Deployer deploy

  INFO: Deploy the application = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml path

  August 14, 2014 11:28:17 oracle.dbtools.standalone.Deployer deploy

  INFO: Deploy the application path = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml

  August 14, 2014 11:28:18 oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder

  INFO: Using the configuration file: / u00/home/oracle/ords/ords

  Configuration properties for: apex

  cache. Caching = false

  cache. Directory = / tmp/apex/cache

  cache. Duration = Days

  cache.expiration = 7

  cache.maxEntries = 500

  cache.monitorInterval = 60

  cache.procedureNameList =

  cache.type = LRU

  DB. HostName = XXXXXXXXXXXXXXXXXXX

  DB. Password = *.

  DB.port = XXXXXXXXXXXXXXXXXXX

  DB.sid = XXXXXXXXXXXXXXXXXXX

  Debug.Debugger = false

  debug.printDebugToScreen = false

  error.keepErrorMessages = true

  error.maxEntries = 50

  JDBC. DriverType = thin

  JDBC. InactivityTimeout = 1800

  JDBC. InitialLimit = 3

  JDBC. MaxConnectionReuseCount = 1000

  JDBC. MaxLimit = 10

  JDBC. MaxStatementsLimit = 10

  JDBC. MinLimit = 1

  jdbc.statementTimeout = 900

  log. Logging = false

  log.maxEntries = 50

  Misc.Compress =

  misc.defaultPage = apex

  misc.enableOldFOP = true

  security.disableDefaultExclusionList = false

  security.maxEntries = 2000

  DB. UserName = APEX_PUBLIC_USER

  August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. MaxLimit in the apex of configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

  August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. InitialLimit in the apex of configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

  Using the JDBC driver: Oracle JDBC driver version: 11.2.0.3.0

  August 14, 2014 11:28:28 oracle.dbtools.rt.web.SCListener contextInitialized

  INFO: Oracle REMAINS initialized data Services

  Version of REST Data Services Oracle: 2.0.8.163.10.40

  The Oracle Data Services REST server info: Grizzly/1.9.49

  August 14, 2014 11:28:28 com.sun.grizzly.Controller logVersion

  INFO: GRIZZLY0001: from Grizzly Framework 1.9.49 - 14/08/14 11:28

  August 14, 2014 11:28:28 oracle.dbtools.standalone.Standalone run

  INFO: http://localhost: 8080/ADR / began to.

  Configuration properties for: apex_al

  cache. Caching = false

  cache. Directory = / tmp/apex/cache

  cache. Duration = Days

  cache.expiration = 7

  cache.maxEntries = 500

  cache.monitorInterval = 60

  cache.procedureNameList =

  cache.type = LRU

  DB. HostName = XXXXXXXXXXXXXXXXXXX

  DB. Password = *.

  DB.port = XXXXXXXXXXXXXXXXXXX

  DB.sid = BXXXXXXXXXXXXXXXXXXX

  Debug.Debugger = false

  debug.printDebugToScreen = false

  error.keepErrorMessages = true

  error.maxEntries = 50

  JDBC. DriverType = thin

  JDBC. InactivityTimeout = 1800

  JDBC. InitialLimit = 3

  JDBC. MaxConnectionReuseCount = 1000

  JDBC. MaxLimit = 10

  JDBC. MaxStatementsLimit = 10

  JDBC. MinLimit = 1

  jdbc.statementTimeout = 900

  log. Logging = false

  log.maxEntries = 50

  Misc.Compress =

  misc.defaultPage = apex

  misc.enableOldFOP = true

  security.disableDefaultExclusionList = false

  security.maxEntries = 2000

  DB. UserName = APEX_LISTENER

  August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. MaxLimit in apex_al configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

  August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. InitialLimit in apex_al configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

  August 14, 2014 11:32:03 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

  WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

  August 14, 2014 11:40:49 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

  WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

  August 14, 2014 11:40:50 oracle.dbtools.rt.web.WebErrorResponse internalError

  GRAVE: JDBCException [kind = NO_DATA]

  JDBCException [kind = NO_DATA]

  at oracle.dbtools.common.jdbc.JDBCException.wrap(JDBCException.java:88)

  at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:63)

  at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:38)

  at oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher.tenant(JDBCTenantDispatcher.java:98)

  at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:71)

  at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:37)

  at oracle.dbtools.rt.web.ReTargetingDispatcher.canDispatch(ReTargetingDispatcher.java:45)

  at oracle.dbtools.rt.web.RequestDispatchers.choose(RequestDispatchers.java:160)

  at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:75)

  at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)

  at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)

  at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.doFilter (ServletAdapter.java:1059)

  to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.invokeFilterChain (ServletAdapter.java:999)

  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)

  at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)

  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)

  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)

  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)

  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)

  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)

  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)

  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)

  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)

  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)

  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)

  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)

  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)

  at com.sun.grizzly.ContextTask.run(ContextTask.java:71)

  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:532)

  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:513)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)

  at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)

  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)

  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)

  at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)

  at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)

  at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:886)

  at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1175)

  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1288)

  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)

  at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3656)

  at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1495)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:111)

  to com.sun.proxy. $Proxy44.executeQuery (unknown Source)

  at oracle.dbtools.common.jdbc.JDBCQueryImpl.resultSet(JDBCQueryImpl.java:92)

  to oracle.dbtools.common.jdbc.JDBCResultRowIterator. < init > (JDBCResultRowIterator.java:29)

  at oracle.dbtools.common.jdbc.JDBCQueryImpl.execute(JDBCQueryImpl.java:52)

  at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:60)

  ... more than 33

  DBA has forgotten to run apex_rest_config.sql Doh!

• I need to uninstall the CD player, it does not appear in the programs in Control Panel.  How can I get rid of him?

  I need to uninstall the CD player, it does not appear in the programs in Control Panel.  How can I get rid of him?

  Hi normans26078633,

  Please use cleaning tool Acrobat/Reader here: http://labs.adobe.com/downloads/acrobatcleaner.html.

  Thank you

  Abhishek

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• Stop button does not reset after each program start

  Newbie here, so when I start the program with the arrow of departure or, my Start button is always in the right position, but the stop button is not. How do reset you the default user as the stop button control.

  Lol it doesn't have the same effect.  They are completely different actions.  If they were the same, then NEITHER would never have created the other.  I've never seen a practical use for 'Up to this that freed'.  Read the help files on the mechanical actions to see the difference.  There is a real difference, delicate and subtle.  But there is a difference.

  If you clean the Boolean logic and put the start in case structure button.  It works very well.  See attachment.

• Not sure of the difference between the two registry paths.

  HKEY_LOCAL_MACHINE tools\msconfig\startupreg\

  entries are stored here, program under key and others, how are they different from the entries stored here...
  HKEY_LOCAL_MACHINE tools\startupreg\
  They two have something to do with starting. someone with a little know-how in this field could be a great help.
  What is the difference between these two and what not the keys of each way folder. ?

  If it is any help, I checked my xp, vista, and win7 and they all have this branch of the registry but it is empty of all keys. for example empty:

  HKEY_LOCAL_MACHINE tools\msconfig\startupreg\

  and none of the bones had the other key that you mentioned. I do not use quicktime, so this may be the reason why.

  If I had to guess with analysis and fiddling with the registry since it was invented by microsoft, registry branch I have is 'standard '.

  While the secondary registry branch that I don't have is "non-standard" and probably created by quicktime or other software during installation.

  These registry branches are created because the manufacturers software third differring depend on utilities such as quicktime will be writtened to find the key in the registration or another branch.  If the additional branch and keys are added for extra measure by quicktime or other programs.

  I think that in your particular case, only quicktime can tell you why they need to put their keys in 2 different branches.  but its likely that my logic above explain the reason for being.

  HTH.

• Soft Reset via the program or keys (Treo 800w)

  I'm just curious about whether a program, hack or secret of strikes are to allow a restart warm.  I know it's possible, given that several programs to perform a reset via their installation routine.  I know this does not all registers and memory locations because the battery is never deleted, however, it seems to me that it would be a good thing to be able to do if you're having problems and want a quick fix, assuming that the keyboard still works. For me, this scenario would be more like a reboot and remove the battery would be a reset (soft vs hard).

  Just looks like if there is a Hi 3 fingers (Ctrl-Alt-Del) for other versions of Windows, they would have one for Windows Mobile.

  Another reason I wish I had this ability is because I bought a nice box to my new phone and really don't take apart for each reset, because the way it snaps together I'm sure it will decrease the life expectancy of the case.

  http://www.MobileTopSoft.com/Pocket-PC/freeware/tag/reset

  Message relates to: None

• My html table does not appear on the 2nd tab on the Panel (muse widget)

  The same table works fine on the first tab, however when I try to click on the second table in the page mode or overview of the browser on browser, my table is not displayed. Tips to solve this problem?

  If I get this right, you use the tabbed panel widget to display an HTML table in each of the tabs. If this is the case, please make sure that you insert the HTML content on each content area of the tab respectively. To check this, switch between tabs in design mode to check your content.

  Thank you

  Vinayak

• Should variable not reset whenever the image play?

  In my flash program, I have everything on a frame. In the ActionScript on this image, I did a variable named currentButton and set it to the first box, to keep track of which currently affects. In the click function this variable is changed to any button has been clicked.

  Now, I don't think it would work, because seeing that an image is still and yet, (there is no stop() in that order) I thought that currentButton would keep reset each image. To my surprise, it works beautifully. Not that I'm complaining, but I would like to know why it does this. Should not do all the code on the image every time the frame is played, including the part that defines currentButton on button1?

  a clip of fabric about plays that frame once.  the playhead repeatedly re-is NOT governing.  That's why he has

  no need to add a stop() to a movieclip 1 frame.

• Skype does not in closing the program. (Skype 7.17 - Windows 10)

  I used to have the problem where Skype will stop at random to answer when I tried to start, which would force me to close it with the Task Manager, then try again.
  After a lot of fiddling around, update drivers, update of Internet Explorer (please kill me why is this one thing) and so on... I finally managed to get this problem to the most out of my life.
  Now, still only a problem When I try to close the program (by right-clicking on the icon and "quit") it just does not... at all... Strangely it does not change the "not responding" mode, it's just... died. Even in taskmanager it does not show as a "no answer", but he acts as if nothing is wrong.
  
  Here's what "solutions do not work:
  -Remove temporary files
  -deleting files appdata
  -do a clean reinstall
  -addition of "'https://apps.skype.com ' on sites in IE 'internet options'"
  -Remove "'https://apps.skype.com ' on sites in IE 'internet options'"
  -closing all individually the program other than Skype and try again
  -Deletes the registry values for Skype (it was my last resort)
  
  NOTE: While looking through possible questions, I noticed that my Skype in the program compatibility mode is locked 'Windows Vista'... it is grayed out and cannot be changed, no matter what I try. Haven't found a solution for this yet (not even in safe mode).

  The first thing to do is to identify the compatibility set to Skype options.

  Right click on the shortcut on the desktop, select Properties, then the Compatibility tab.

  Press the button "Change settings for all users" and disable the compatibility options in this tab

  http://community.Skype.com/T5/Windows-archive/Skype-crashes-with-Windows-7-compatibility-mode-greyed...