Table for the data to HAVE it

Similar Questions

• Unable to display data for the date where there is no entry in the table

  Hello
  
  I need a urgent, described below:
  
  I have a table named as 'dirty', consisting of three columns: empno, sale_amt and sale_date.
  (Please ref. The table with data script as shown below)
  
  Now, if I run the query:
  "select trunc (sale_date) sale_date, sum (sale_amt) total_sale of the sales group by order trunc (sale_date) by 1.
  It then displays the data for the dates there is an entry in this table. But it displays no data for the
  date in which there is no entry in this table.
  
  If you run the Table script with data in your schema, then u will see that there is no entry for the 28th. November 2009 in
  sales table. Now the above query displays data for the rest as his dates are in the table of the sale with the exception of 28. November 2009.
  But I need his presence in the result of the query with the value "sale_date' as '28. November 2009 "and that of"total_sale"as
  « 0 ».
  
  Y at - there no way to get the result I need?
  
  Please help as soon as POSSIBLE.
  
  Thanks in advance.
  
  Create the table script that contains data:
  ------------------------------------------
  
  CREATE TABLE SALE
  (
  NUMBER EMPNO,
  NUMBER OF SALE_AMT
  DATE OF SALE_DATE
  );
  TOGETHER TO DEFINE
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (DECEMBER 1, 2009 10:20:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 30, 2009 10:21:04 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 29, 2009 10:21:05 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 26, 2009 10:21:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 25, 2009 10:21:07 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 5000, TO_DATE (NOVEMBER 27, 2009 10:23:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 4000, TO_DATE (NOVEMBER 29, 2009 10:23:08 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 3000, TO_DATE (NOVEMBER 24, 2009 10:23:09 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 2000, TO_DATE (NOVEMBER 30, 2009 10:23:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 7000, TO_DATE (NOVEMBER 24, 2009 10:24:19 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 5000, TO_DATE (NOVEMBER 25, 2009 10:24:20 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 3000, TO_DATE (NOVEMBER 27, 2009 10:24:21 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 2000, TO_DATE (NOVEMBER 29, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 1000, TO_DATE (NOVEMBER 30, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  COMMIT;
  
  Any help will be necessary for me
  
  
  Kind regards

  WITH tab AS
    (SELECT TRUNC(sale_date) sale_date,
      SUM(sale_amt) total_sale
       FROM sale
     GROUP BY TRUNC(sale_date)
     ORDER BY 1
    )
   SELECT sale_date,
    NVL(total_sale,0) total_sale
     FROM tab
     model
     REFERENCE refmodel ON (SELECT 1 indx, MAX(sale_date)-MIN(sale_date) AS daysdiff , MIN(sale_date) minsaledate FROM tab)
       dimension BY (indx)
       measures(daysdiff,minsaledate)
     main main_model
     dimension BY (sale_date)
     measures(total_sale)
     RULES upsert SEQUENTIAL ORDER ITERATE(1000) until (iteration_number>refmodel.daysdiff[1]-1)
     ( total_sale[refmodel.minsaledate[1]+iteration_number]=total_sale[cv()] )
  ORDER BY sale_date
  

  using a clause type

  Ravi Kumar

• By comparing the two tables for the integrity of the data

  Hi all
  I need to compare two tables for the integrity of the data through the SQL query.

  If you need to compare all the columns of t1 to t2:

  (SELECT * FROM t1
  MINUS
  SELECT * FROM t2)
  UNION ALL
  (SELECT * FROM t2
  MINUS
  SELECT * FROM t1);
  

  Kind regards
  Ankit Rouault
  http://theoraclelog.blogspot.in

• Table 'dbc_user' in the descriptor of the item: 'user' does not exist in a space of accessible table by the data source.

  In my development environment, when I run the production server, I get the following error in the server.log. I have configured the data source for the production. I use ATG 10.1. Please help solve this problem. Here are the logs

  22:46:45, 765 full repository INFO [ProfileAdapterRepository] SQL boot

  22:46:45, 988 full repository INFO [AdminSqlRepository] SQL boot

  22:46:45, 990 Initializing INFO [AdminAccountInitializer] account database/atg/dynamo/security/AdminAccountManager of/atg/dynamo/security/SimpleXmlUserAuthority

  22:46:46, 450 ERROR [ProfileAdapterRepository] Table 'dbc_user' in the descriptor of the item: 'user' does not exist in a space of accessible table by the data source.  DatabaseMetaData.getColumns returns without columns.  Catalog = null Schema = null

  22:46:46, 466 WARN [ProfileAdapterRepository] atg.adapter.gsa.GSARepository-> loadColumnInfo: SQLException in Table.loadColumnInfo.  Try again.

  com MySQL.JDBC.exceptions.jdbc4.MySQLSyntaxErrorException: Table 'atgcoredb.dbc_user' does not exist

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:525)

  at com.mysql.jdbc.Util.handleNewInstance(Util.java:407)

  at com.mysql.jdbc.Util.getInstance(Util.java:382)

  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1052)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3603)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3535)

  at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1989)

  at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2150)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2620)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2570)

  at com.mysql.jdbc.StatementImpl.executeQuery(StatementImpl.java:1476)

  to com.mysql.jdbc.DatabaseMetaData$ 7.forEach(DatabaseMetaData.java:3966)

  at com.mysql.jdbc.IterateBlock.doForAll(IterateBlock.java:51)

  at com.mysql.jdbc.DatabaseMetaData.getPrimaryKeys(DatabaseMetaData.java:3950)

  at atg.adapter.gsa.Table.loadColumnInfo(Table.java:1926)

  at atg.adapter.gsa.GSARepository.loadColumnInfos(GSARepository.java:7534)

  to atg.adapter.gsa.GSARepository$ 1.run(GSARepository.java:5431)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:603)

  at java.lang.Thread.run(Thread.java:722)

  22:46:46, 467 WARN [ProfileAdapterRepository] unknown JDBC type for property: businessAddress, element type: user. Make sure that the column names in the database and match model.  The business_addr column is not found in the set of columns returned by the database: {} for this table.

  22:46:46, 470 ERROR [ProfileAdapterRepository] Table 'dbc_buyer_billing' in the descriptor of the item: 'user' does not exist in a space of accessible table by the data source.  DatabaseMetaData.getColumns returns without columns.  Catalog = null Schema = null

  22:46:46, 470 WARN [ProfileAdapterRepository] atg.adapter.gsa.GSARepository-> loadColumnInfo: SQLException in Table.loadColumnInfo.  Try again.

  com MySQL.JDBC.exceptions.jdbc4.MySQLSyntaxErrorException: Table 'atgcoredb.dbc_buyer_billing' does not exist

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:525)

  at com.mysql.jdbc.Util.handleNewInstance(Util.java:407)

  at com.mysql.jdbc.Util.getInstance(Util.java:382)

  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1052)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3603)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3535)

  at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1989)

  at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2150)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2620)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2570)

  at com.mysql.jdbc.StatementImpl.executeQuery(StatementImpl.java:1476)

  to com.mysql.jdbc.DatabaseMetaData$ 7.forEach(DatabaseMetaData.java:3966)

  at com.mysql.jdbc.IterateBlock.doForAll(IterateBlock.java:51)

  at com.mysql.jdbc.DatabaseMetaData.getPrimaryKeys(DatabaseMetaData.java:3950)

  at atg.adapter.gsa.Table.loadColumnInfo(Table.java:1926)

  at atg.adapter.gsa.GSARepository.loadColumnInfos(GSARepository.java:7534)

  to atg.adapter.gsa.GSARepository$ 1.run(GSARepository.java:5431)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:603)

  at java.lang.Thread.run(Thread.java:722)

  22:46:46, 471 WARN [ProfileAdapterRepository] unknown JDBC type for the property: myBillingAddrs, element type: user. Make sure that the column names in the database and match model.  The addr_id column is not found in the set of columns returned by the database: {} for this table.

  22:46:46, ERROR 611 [ProfileAdapterRepository] Table 'dbc_org_billing' in the descriptor of the item: "organization" does not exist in a space of accessible table by the data source.  DatabaseMetaData.getColumns returns without columns.  Catalog = null Schema = null

  22:46:46, 611 WARN [ProfileAdapterRepository] atg.adapter.gsa.GSARepository-> loadColumnInfo: SQLException in Table.loadColumnInfo.  Try again.

  com MySQL.JDBC.exceptions.jdbc4.MySQLSyntaxErrorException: Table 'atgcoredb.dbc_org_billing' does not exist

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:525)

  at com.mysql.jdbc.Util.handleNewInstance(Util.java:407)

  at com.mysql.jdbc.Util.getInstance(Util.java:382)

  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1052)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3603)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3535)

  at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1989)

  at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2150)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2620)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2570)

  at com.mysql.jdbc.StatementImpl.executeQuery(StatementImpl.java:1476)

  to com.mysql.jdbc.DatabaseMetaData$ 7.forEach(DatabaseMetaData.java:3966)

  at com.mysql.jdbc.IterateBlock.doForAll(IterateBlock.java:51)

  at com.mysql.jdbc.DatabaseMetaData.getPrimaryKeys(DatabaseMetaData.java:3950)

  at atg.adapter.gsa.Table.loadColumnInfo(Table.java:1926)

  at atg.adapter.gsa.GSARepository.loadColumnInfos(GSARepository.java:7534)

  to atg.adapter.gsa.GSARepository$ 1.run(GSARepository.java:5431)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:603)

  at java.lang.Thread.run(Thread.java:722)

  22:46:46, 612 WARN [ProfileAdapterRepository] unknown JDBC type for the property: myBillingAddrs, element type: Organization. Make sure that the column names in the database and match model.  The addr_id column is not found in the set of columns returned by the database: {} for this table.

  You want to run the B2BCommerce module? If so, then you must run the $dynamo_home /... / B2BCommerce/SQL/db_components/MySQL/b2b_user_ddl. SQL ddl because you are missing the B2BCommerce tables. If this isn't the case, you will have to redo without the B2BCommerce module.

  Thank you

  Joe

• bunch of table temporary organized vs table for organizing data

  We use the Oracle 10 g on Linux platform.
  
  We have an intermediate table where the data read from the file (containing 1 million rows per day) is loaded, enriched(insert/update/delete) and then finally load in the table of another. I want to know if this table is a global temporary table or normal heap organized to reduce the generation of undo/redo.
  
  I'm not in favor of the temporary table because:
  1. any additional pressure on the temporary tablespace can cause ORA-01652: unable to extend temp segment temporary problems
  2. they are mainly intended to manipulate specific session data.
  3 - statistics do not exist for these work Oracle tables. To do this, we will have to do a dynamic sampling in the query.
  
  The problem with the table organized in piles is that they generate more undo/redo as temporary tables.
  
  Please guide me.

  >
  We have an intermediate table where the data read from the file (containing 1 million rows per day) is loaded, enriched(insert/update/delete) and then finally load in the table of another. I want to know if this table is a global temporary table or normal heap organized to reduce the generation of undo/redo.

  I'm not in favor of the temporary table because:
  1. any additional pressure on the temporary tablespace can cause ORA-01652: unable to extend temp segment temporary problems
  2. they are mainly intended to manipulate specific session data.
  3 - statistics do not exist for these work Oracle tables. To do this, we will have to do a dynamic sampling in the query.

  The problem with the table organized in piles is that they generate more undo/redo as temporary tables.
  >
  Some of you concerns can easily be mitigated.

  1 - temp tablespace

  A common practice for ETL processing to create and use a temporary tablespace customized to use TWG. This prevents the TWG of impacting on the standard temp space and possibly interfere with the rest of the DB.

  See "Creating a temporary Table" in the DBA Guide. This article has sample code that illustrates this.
  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/tables003.htm#i1006400
  >
  By default, rows in a temporary table is stored in the temporary tablespace default of the user who creates it. However, you can assign a temporary table to a different tablespace when creating the temporary table by using the TABLESPACE in CREATE TABLE of TEMPORARY GLOBAL clause. You can use this feature to save the space used by temporary tables. For example, if you need to perform many operations of small temporary table and the default temporary tablespace is configured for sort operations and uses so a large measure, these small operations consume a lot of unnecessary disk space. In this case, it is best to assign a tablespace temporary second with a smaller measure.
  >
  #2 (planned for the session-specific data processing) is correct, that they have the specific session data. But GTT can also be used simply to reduce the amount of REDO normal DML operations during the processing of data which are already isolated from other users and does not need to be shared.
  >
  3 - statistics do not exist for these work Oracle tables. To do this, we will have to do a dynamic sampling in the query.
  >
  Sure - but a working Oracle generally does not collect statistics whenever you do DML on your staging table. And if you do stats new TRUNCATE/LOAD operations should gather anyway once you load the new data.

  You may not have considered one of the factors are that you should design your architecture to be scalable. It is quite possible that you have only a SINGLE step and your current treatment is very simple.

  If so AND you do not need an evolutionary process, so the solution suggested by knani, maybe the best solution for you. But this solution is not very scalable.

  Complext ETL implementations have several steps. And the data still does not move between these steps in one nice, easy step. It is a common requirement that after each stage of data processing can must be discussed or reported on make sure you that he satisfied all the requirements of the company. Then data problems (e.g. lack of data, incorrect, etc.) must be resolved before the data can be processed to the next step. Depending on the severity of the problems that step may need to be rerun.

  If only the TWG is used there is no way to "review" the data. And if ONLY the external tables are used, then you can not tables of several process efficient in parallel and asynchronously.

  Complex implementations that I worked on usually consisted of a range of external and normal tables and TWG.

  External tables and one step simple "data cleansing" are used to load data into tables normal as soon as possible. That allows multiple processes to run asynchronously and in parallel for the detection of problems of data 'stored' as much as possible. Any table can be reloaded/processed without affecting other processes.

  This suggests that your first step should knapen processes in place do the same "serial" cleaning possible.

  The second stage of ETL, when necessary, can perform cleanup of more complex data for data in a table or several tables. TWG can be effectively used here to store the intermediate results that may have large amounts of 'temporary' DML performed on the data. At the end of this stage the TWG data would be transferred to another table of result or permanent staging.

  Start with a simple one-step process (maybe Karthicks). The key is to avoid complicating the process in a way that makes it impassable.

• ADF is intended for the data base designed with vertical diagram?

  Hello
  
  I want to know if ADF 11 g is intended for the data base designed with vertical scheme where even the names of columns will be stored in a generic table?
  
  Thanks in advance.
  
  Published by: user8925296 on April 12, 2010 10:06

  The short answer is no...

  What do you call a 'vertical plan', it's what others have called for a schema of entity-attribute-value or universal data model. I advise you to do some research open minded on these types of patterns if you develop an application before continuing. Great sound in practice, they have very inherent ease of use and scalability problems. [url http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:2314483800346542969] This could be a good starting point...

  John

• Open the page with the data you have selected to another page

  Hello

  I think this might be a simple question, but everything I have tried does not seem to work.

  I am trying to open a second page in a list, with a value selected, to another list from another page. However, I tried all unique combinations of the tutorial but nothing works I don't know how to explain it so I have attached a diagram.

  the FilterDataContainer.qml and the FilterAlphaContainer.qml are identical except for the data query.

  I tried:

  -ControlDelegate with NavigationTab [AKA save the Green layer, FilteredDataContainer.qml like NavigationTab-> it turns out that white.] Is it because the list itself is inside a .qml file which is then within another container?

  -ComponentDefinition (documentation speaks to add it to the container, but I would like to create a new page;

  What would be the easiest way to make this work?

  Thank you!

  

  That didn't work either.

  I found the solution: http://supportforums.blackberry.com/t5/Native-Development/How-to-change-a-variable-of-an-attached-ob...

  Basically, I left my original code intact and in fact reloaded data :

  onQueryChanged {
  
  datasource.load()
  
  }
  

  Very weird roundabout and seems to have nothing to do with the IDs/types, etc., I thought it was!

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• customization error "Sysprep is not installed on the server of virtual center for the model you have selected.

  Hi all

  Need your help with customization of the script here is the steps I've done so far

  1.I have created a virtual machine with Windows XP Professional as the operating system installed VMware Tools / VMware view agent then I added the virtual machine to the domain and created a template called (winXPtemp)

  2. According to article http://www.VMware.com/support/VC/doc/c12prepcustomize.html#1030366 I downloaded the Q257813_w2k_spl_x86_en.exe and the same extract. I force my VC server find the path as mentioned in article

  C:\ [VirtualCenter_installation_directory]\resources\windows\sysprep\1.1 so copied the files extracted to the location C:\Program Files\VMware\Infrastructure\VirtualCenter Server\resources\windows

  3 then I copied and extracted the file \support\tools\deploy.cab on the windows 2003 CD and copied the sysprep files extracted to the following location on the VC Server

  C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  4. After you have done that, I've created a script under customization script called "testsript".

  5 Note until now I have not created a pool of resources as requires it the deployment of only 4 VM on an ESX Server with script customization. The data store for the virtual machine is a 100 GB LUN from a 2050 of FAS of NetApp iSCSI

  6. now when I create an automatic pool when I select the script that I created in step 4, and then click then it gives me an error "Sysprep is not installed on the server of virtual center for the model you have selected. Sysprep on the server installation.

  Troubleshooting done by me:

  I have readded the VC Server Manager to view but it force worked

  Thanks in advance for your help

  Kind regards

  v

  If I remember correctly the location for XP should go to: C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\sysprep\xp

  For XP SP2 Sysprep files can be downloaded from the Microsoft site and are called

  Windows XP SP2 deployment tools

  The article you linked was VirtualCenter 1.x. Since you have given a version number of VirtualCenter I assumed it was 2.x or later.

  ----

• Storage VMotion - a general error occurred: could not wait for the data.  Error bad0007.

  People,

  I searched through this forum and have not found an answer that works in many positions out there, I say to myself that I would ask him once again.

  Here's the context:

  We have 12 identical Dell M600 blades in 2 chassis with 16 GB of Ram, 2 x Xeon E5430, they are all connected to an Equallogic PS 5000XV iSCSI SAN on a separate iSCSI (vswitch1) with 2 cards network dedicated network and dedicated switch, console svc iscsi dedicated, dedicated VMkernel port for iscsi access. Net access (vswitch0) contains port groups VM for our various networks and a console port and vmkernel svc for VMotion with 2 separate NETWORK cards as well.

  We are running ESX 3.5 U3 and VCenter 2.5 U3 on Win2k3 R2

  VMotion works between all servers, Storage Vmotion works for most machines, HA works and the value 2 host failurs with no monitoring of vm, DRS is set to manual for now I have a few machines on the local stores that I complete my rebuilt LUN, there is no set of rules for DRS and VMware EVC is enabled for guests of the Intel. However, I'll just describe one machine to do svmotion below.

  Here's the problem:

  I'm trying to Svmotion via svmotion.pl - interactive, a Machine to Windows 2000 with a virtual disk and a virtual RDM. I am aware of the requirements for the RDM and required parameters for svmotion, independent is not selected for the RDM, and I also have svmotioned several machines linux and win2k3 with the same configuration without problem. In the interactive session, I choose to individually place the disks and I chose the virtual disk to only the virtual machine to be moved, essentially, as I saw it move vdisk virtual machine and then copy to the pointer of the RDM.

  The use of the processor in this machine is about 25% average. but I try to run migrations at the time the lowest. and The Host it itself shows only about 5.5 GB of the 16 GB of RAM used. so I think we're good on the RAM. the volume/datastore that I'm migrating from has 485 GB free and the volume/datastore I migration towards a 145 GB free. the VM virtual disk is only about 33 GB.

  I run the script the windows version of the RCLI svmotion. and when to begin the process, I get the following error at around 2 percent of the progress:

  "Since the server has encountered an error: a general error occurred: could not wait for the data."  Error bad0007. Invalid parameter. »

  After searching around, I found the following hotfixes to the U2 release notes

  • Migrate.PageInTimeoutResetOnProgress: Set the value to 1.

  • Migrate.PageInProgress: The value 30, if you get an error even after the setting of the Migrate.PageInTimeoutResetOnProgress variable.

  I've made these changes, and I still get the same error.

  When I dig in the newspaper, I see these entries in the journal of vmkwarning:

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1397: migHeap0 already at its maximumSize bunch. Cannot extend.

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: bunch: 1522: Heap_Align (migHeap0, 1030120338/1030120338 bytes, 4 align) failed.  calling: 0x988f61

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu4:1394) WARNING: migrate: 1243: 1235452646235015: failure: out of memory (0xbad0014) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: MigrateNet: 309: 1235452646235015: 5 - 0xa023818: sent only 4096 bytes of data in message 0: Broken pipe

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu6:1396) WARNING: migrate: 1243: 1235452646235015: failed: Migration protocol error (0xbad003e) @0x98da8b

  (Feb 24 00:17:32 vmkernel iq-virt-c2-b6: 82:04:13:56.794 cpu2:1395) WARNING: migrate: 6776: 1235452646235015: could not send data for 56486: Broken pipe

  At this point, I'm stuck... What is Windows RCLI? the vcenter Server? or the service console with not enough of RAM? We have already increased all our consoles service 512 MB...

  Any help would be greatly appreciated...

  Thanks in advance.

  Alvin

  The vmkernel on out of memory error, I had that before. And vmware support recommends setting 800M Max service console memory. And I did it and have no problems after that.

  See if that helps the issue.

  Mike

• How can I get the lines for the date between 2 different days

  Hi all,
  
  How can I get the lines for the date between 2 different days.
  
  Sample data:
  Table name: Articles
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  Title 3 2011-08-21 08-21-2011
  title4 2011-08-28 2011-09-11
  
  Result will be:
  Title start_date end_date
  Heading1 08-22-2011 2011-09-11
  2011-08-01-2011-09-01 Title2
  title4 2011-08-28 2011-09-11
  
  This is my example query:
  SELECT * FROM items WHERE trunc (es.date_start) > = TO_DATE('2011-08-22', 'YYYY-MM-DD') AND trunc (es.date_end) < = TO_DATE ('2011-08-28', 'YYYY-MM-DD')
  
  but I can not get the expected results. Any help would be much appreciated.
  
  Thanks in advance

  not read your question properly before...

  Please try this

  Select * FROM items
  WHERE (TO_DATE ('2011-08-22', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end)) OR
  (TO_DATE ('2011-08-28', 'YYYY-MM-DD') between TRUNC (es.date_start))
  AND TRUNC (es.date_end))

• Enter the value for the data files:

  Hi all
  I use 10.2.0.1.0
  I have a tablespace "hg" with two data files.
  whenever I use after an order to drop this tablespace I hv asked values for data files
  Welcome is:
  
  SQL > drop tablespace hg, including content and data files;
  
  SQL > drop tablespace hg, including content and data files;
  
  I have two data files to the tablespace named as hg.dbf, hg1.dbf
  
  now what I hv value to enter? or how to calculate the value.
  
  
  Thank you

  Honey says:
  Yes I know its 'AND' but when I using the '&' then oracle asked me of ' enter the values of the data files: "k".
  Please try first, then the calculation of the value.
  It can be a variable binding value.
  If you find the answer please suggest steps

  Simple words, the "DROP TABLESPACE" command does not support '&' character. & is a substitution of placeholder for SQL variable * more.

  Even if you provide the value for the "data files" prompt, the command does not work as it would lead to "drop tablespace including contents tsname *"details of your file *.

• Dictionary of Table for the ip address of the database

  What is the Oracle data dictionary Table for the ip address of the database

  Hello

  I think that could give him the IP address

  SQL > select SYS_CONTEXT ('USERENV', 'IPAddress', 15) double ipaddr;

  concerning

  Jafar

• have toshiba LL850 want to resize image for the background but have tried most things and still does not

  I have a Toshiba L850 and try to mount an image for the background.  Have you tried the resolution of the screen to pull the lever, but still does not.  Can someone go through the steps for me please.

  Hi June,

  What version of Windows is installed on the computer?

  The articles below show you how to change the background image and set the Position of the image in the Center that it adjusts automatically on the screen.

  Items are for Windows 7 The steps are similar to Windows Vista and Windows 8. However please let me know what version of Windows is installed on the computer and I'll give you the steps for this operating system. When the computer restarts, you'd be able to see the name.

  http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background-wallpaper

  http://Windows.Microsoft.com/en-us/Windows7/change-your-desktop-background

  I hope this helps. Get back to us if you need more help.

• cant serch for the dates... ERROR_80004002 keeps coming back?

  As I said in the title I can not serch for the dates, I get error 80004002

  cannot find answer for this error and has never had this problem before?

  anyone in the know that I could use some answers... lol

  Hello

  Method 1:

  I suggest you to see the links and check.

  Error message when you try to install updates by using Microsoft Update or Windows Update Web site: «0 x 80004002»

  http://support.Microsoft.com/kb/956708

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  I also suggest you to run the System File Checker

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833