Table is not fetch all the data of the VO at a time?

Similar Questions

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• May not use all the available space in the data store

  Hello

  We have a HP DL580 G7 Server P410i raid controller with 8 x 1 TB HDD.

  I create a raid 1 with 2 hard drives (1 TB) and raid 5 with 6 hard drives (5 TB) and install ESXi 5.1 in the first data store (1 to).

  After installation when I tried to create the 5 TB data store, (ESXi detects and displays the space available 5 TB) it does use that almost 2.5 TB! and may not use all the space

  I also installed the ESXi 5.5 but still no luck.

  This Ko seems to apply to you: http://kb.vmware.com/kb/2006942

• WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

  Hi, we get this error in an independent ADR on Grizzly implemented.

  August 14, 2014 09:59:05

  oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

  WARNING: The pool_config view or a table has not been found in the schema:

  APEX_LISTENER

  Oracle.dbtools.rt.web.WebErrorResponse 09:59:05 August 14, 2014

  internalError

  GRAVE: JDBCException [kind = NO_DATA]

  JDBCException [kind = NO_DATA]

  defaults.xml "XXXXX" designate removed for safety, front of post

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  < ! DOCTYPE SYSTEM property "http://java.sun.com/dtd/properties.dtd" > ""

  Properties of <>

  < comment > saved on Mon Aug 04 16:25:09 EDT 2014 < / comment >

  < key "cache.caching entry" = > false < / entry >

  < key = "cache.directory entry" > / tmp/apex/cache < / entry >

  < key = "cache.duration entry" > days < / entry >

  < key = "enter cache.expiration" > 7 < / entry >

  < key = "enter cache.maxEntries" > 500 < / entry >

  < key = "enter cache.monitorInterval" 60 > < / entry >

  < key = "cache.procedureNameList" / entry >

  < key = "cache.type entry" > lru < / entry >

  < key = "db.hostname entry" > XXXXXXXXX < / entry >

  < key = "db.password entry" > XXXXXXXXXXX < / entry >

  < key = "db.port entry" > XXXX < / entry >

  < key "db.sid entry" = > XXXXXX < / entry >

  < key "debug.debugger entry" = > false < / entry >

  < key "debug.printDebugToScreen entry" = > false < / entry >

  < key "error.keepErrorMessages entry" = > true < / entry >

  < key = "enter error.maxEntries" > 50 < / entry >

  < enter key = "jdbc. DriverType"> thin < / entry >

  < enter key = "jdbc. InactivityTimeout"1800 > < / entry >

  < enter key = "jdbc. InitialLimit' > 3 < / entry >

  < enter key = "jdbc. MaxConnectionReuseCount"> 1000 < / entry >

  < enter key = "jdbc. MaxLimit' 10 > < / entry >

  < enter key = "jdbc. MaxStatementsLimit' 10 > < / entry >

  < enter key = "jdbc. MinLimit"> 1 < / entry >

  < key = "enter jdbc.statementTimeout" > 900 < / entry >

  < key "log.logging entry" = > false < / entry >

  < key = "enter log.maxEntries" > 50 < / entry >

  < key = "misc.compress" / entry >

  < key = "misc.defaultPage entry" > apex < / entry >

  < key "misc.enableOldFOP entry" = > true < / entry >

  < key "security.disableDefaultExclusionList entry" = > false < / entry >

  < key = "enter security.maxEntries" > 2000 < / entry >

  < / properties >

  Complete log

  August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

  INFO: NOTE:

  Stand-alone mode is designed for use in development and test environments. This not is not supported for use in production environments.

  August 14, 2014 11:28:13 oracle.dbtools.standalone.Standalone run

  INFO: Starting standalone Web container to: / u00/home/oracle/ords/ords

  August 14, 2014 11:28:14 oracle.dbtools.standalone.Deployer deploy

  INFO: Deploy the application = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml path

  August 14, 2014 11:28:17 oracle.dbtools.standalone.Deployer deploy

  INFO: Deploy the application path = /u00/home/oracle/ords/ords/ords/WEB-INF/web.xml

  August 14, 2014 11:28:18 oracle.dbtools.common.config.file.ConfigurationFolder logConfigFolder

  INFO: Using the configuration file: / u00/home/oracle/ords/ords

  Configuration properties for: apex

  cache. Caching = false

  cache. Directory = / tmp/apex/cache

  cache. Duration = Days

  cache.expiration = 7

  cache.maxEntries = 500

  cache.monitorInterval = 60

  cache.procedureNameList =

  cache.type = LRU

  DB. HostName = XXXXXXXXXXXXXXXXXXX

  DB. Password = *.

  DB.port = XXXXXXXXXXXXXXXXXXX

  DB.sid = XXXXXXXXXXXXXXXXXXX

  Debug.Debugger = false

  debug.printDebugToScreen = false

  error.keepErrorMessages = true

  error.maxEntries = 50

  JDBC. DriverType = thin

  JDBC. InactivityTimeout = 1800

  JDBC. InitialLimit = 3

  JDBC. MaxConnectionReuseCount = 1000

  JDBC. MaxLimit = 10

  JDBC. MaxStatementsLimit = 10

  JDBC. MinLimit = 1

  jdbc.statementTimeout = 900

  log. Logging = false

  log.maxEntries = 50

  Misc.Compress =

  misc.defaultPage = apex

  misc.enableOldFOP = true

  security.disableDefaultExclusionList = false

  security.maxEntries = 2000

  DB. UserName = APEX_PUBLIC_USER

  August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. MaxLimit in the apex of configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

  August 14, 2014 11:28:26 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. InitialLimit in the apex of configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

  Using the JDBC driver: Oracle JDBC driver version: 11.2.0.3.0

  August 14, 2014 11:28:28 oracle.dbtools.rt.web.SCListener contextInitialized

  INFO: Oracle REMAINS initialized data Services

  Version of REST Data Services Oracle: 2.0.8.163.10.40

  The Oracle Data Services REST server info: Grizzly/1.9.49

  August 14, 2014 11:28:28 com.sun.grizzly.Controller logVersion

  INFO: GRIZZLY0001: from Grizzly Framework 1.9.49 - 14/08/14 11:28

  August 14, 2014 11:28:28 oracle.dbtools.standalone.Standalone run

  INFO: http://localhost: 8080/ADR / began to.

  Configuration properties for: apex_al

  cache. Caching = false

  cache. Directory = / tmp/apex/cache

  cache. Duration = Days

  cache.expiration = 7

  cache.maxEntries = 500

  cache.monitorInterval = 60

  cache.procedureNameList =

  cache.type = LRU

  DB. HostName = XXXXXXXXXXXXXXXXXXX

  DB. Password = *.

  DB.port = XXXXXXXXXXXXXXXXXXX

  DB.sid = BXXXXXXXXXXXXXXXXXXX

  Debug.Debugger = false

  debug.printDebugToScreen = false

  error.keepErrorMessages = true

  error.maxEntries = 50

  JDBC. DriverType = thin

  JDBC. InactivityTimeout = 1800

  JDBC. InitialLimit = 3

  JDBC. MaxConnectionReuseCount = 1000

  JDBC. MaxLimit = 10

  JDBC. MaxStatementsLimit = 10

  JDBC. MinLimit = 1

  jdbc.statementTimeout = 900

  log. Logging = false

  log.maxEntries = 50

  Misc.Compress =

  misc.defaultPage = apex

  misc.enableOldFOP = true

  security.disableDefaultExclusionList = false

  security.maxEntries = 2000

  DB. UserName = APEX_LISTENER

  August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. MaxLimit in apex_al configuration uses a value of 10, this setting cannot be sized properly for a production environment *.

  August 14, 2014 11:32:01 oracle.dbtools.common.config.db.ConfigurationValues intValue

  ATTENTION: * jdbc. InitialLimit in apex_al configuration uses a value of 3, this setting cannot be sized properly for a production environment *.

  August 14, 2014 11:32:03 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

  WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

  August 14, 2014 11:40:49 oracle.dbtools.common.config.db.DatabasePoolConfig readPoolConfig

  WARNING: The pool_config view or table is not found in the schema: APEX_LISTENER

  August 14, 2014 11:40:50 oracle.dbtools.rt.web.WebErrorResponse internalError

  GRAVE: JDBCException [kind = NO_DATA]

  JDBCException [kind = NO_DATA]

  at oracle.dbtools.common.jdbc.JDBCException.wrap(JDBCException.java:88)

  at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:63)

  at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:38)

  at oracle.dbtools.rt.jdbc.entity.JDBCTenantDispatcher.tenant(JDBCTenantDispatcher.java:98)

  at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:71)

  at oracle.dbtools.rt.jdbc.entity.TenantDispatcherBase.target(TenantDispatcherBase.java:37)

  at oracle.dbtools.rt.web.ReTargetingDispatcher.canDispatch(ReTargetingDispatcher.java:45)

  at oracle.dbtools.rt.web.RequestDispatchers.choose(RequestDispatchers.java:160)

  at oracle.dbtools.rt.web.RequestDispatchers.dispatch(RequestDispatchers.java:75)

  at oracle.dbtools.rt.web.ETags.checkPrecondition(ETags.java:93)

  at oracle.dbtools.rt.web.HttpEndpointBase.restfulServices(HttpEndpointBase.java:426)

  at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:164)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)

  to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.doFilter (ServletAdapter.java:1059)

  to com.sun.grizzly.http.servlet.ServletAdapter$ FilterChainImpl.invokeFilterChain (ServletAdapter.java:999)

  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:434)

  at oracle.dbtools.standalone.SecureServletAdapter.doService(SecureServletAdapter.java:91)

  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:379)

  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:196)

  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:179)

  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:849)

  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:746)

  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:1045)

  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:228)

  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:137)

  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:104)

  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:90)

  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:79)

  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:54)

  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:59)

  at com.sun.grizzly.ContextTask.run(ContextTask.java:71)

  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:532)

  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:513)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:447)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)

  at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)

  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:505)

  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:223)

  at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)

  at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:208)

  at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:886)

  at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1175)

  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1288)

  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3612)

  at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3656)

  at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1495)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at oracle.ucp.jdbc.proxy.PreparedStatementProxyFactory.invoke(PreparedStatementProxyFactory.java:111)

  to com.sun.proxy. $Proxy44.executeQuery (unknown Source)

  at oracle.dbtools.common.jdbc.JDBCQueryImpl.resultSet(JDBCQueryImpl.java:92)

  to oracle.dbtools.common.jdbc.JDBCResultRowIterator. < init > (JDBCResultRowIterator.java:29)

  at oracle.dbtools.common.jdbc.JDBCQueryImpl.execute(JDBCQueryImpl.java:52)

  at oracle.dbtools.common.jdbc.JDBCQueryProvider.query(JDBCQueryProvider.java:60)

  ... more than 33

  DBA has forgotten to run apex_rest_config.sql Doh!

• a key for the table does not exist in the table

  Hi guys,.
  
  I imported several tables of physical layer in the administration tool. So, I want to do new foreign key between tables join in the physical schema.
  Required fields for posting a link between these tables are set up. When I press the ok button, an error message is displayed:
  "a key corresponding to the table does not exist in the table blablabla. You want to create a? »
  
  In fact, what is this error? I don't have all the idea about it. The number of the type of the fields is the same, the names are also the same. I think that he should not have problems to make the new foreign key. But why is it happening?
  
  Thank you

  Hello

  It is the primary key of the first table. You might not have set this column as the primary key of this table at the level of the db.

  Thank you
  Imtiaz.

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Send an email using mail my signature seems to drop before my email is considered by my beneficiaries. This does not happen all the time but often. Is anyone else know / encountered this problem? If, kind of help to rectify this please.

  Hi, when you send an email using the mail my signature seems to drop before my email is considered by my beneficiaries. This does not happen all the time but often. Is anyone else know / encountered this problem? If so help to rectify this would be greatly appreciated please. Thank you

  It is up to the recipient how their e-mail is displayed. For example, if you include html or an image in your email the recipient may set up their customer e-mail to not display html or images. You have no control over the way a recipient chooses configure their e-mail client.

• The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?

  The temporary internet files folder does not show all the files in this folder property while is more than 1 GB. How to delete temporary internet files. ?  Disk space is very low around 1 & half GB. Please someone help resolve this issue. I am looking for the solution, but it did not have a specific.

  Thank you best regards &.

  Atul Zade.

  CCleaner is very useful to get rid of temporary files, you can get it here: http://www.piriform.com/ccleaner you can use it to clean your temporary files, but DO NOT use registry cleaning works, registry cleaning is mainly a useless effort that can cause more harm than good.

  John

• My very old DELL does not start all the time. And when that happens, it doesn't look very good.

  Original title: Please help

  I HAVE A VERY OLD DELL LAPTOP THAT WILL NOT START ALL THE TIME, AND WHEN THAT HAPPENS IT LOOKS LIKE SA WORKS VERY HARD!

  I HAVE A VERY OLD DELL LAPTOP THAT WILL NOT START ALL THE TIME, AND WHEN THAT HAPPENS IT LOOKS LIKE SA WORKS VERY HARD!

  It seems that two things must happen... Three if you don't have good backups (it would be the first thing * if * you have not any outside of the machine.)

  (1) the material must be tested.  By restarting and pressing the combination of keys at the right time could test the hard/readers/speed control (CTRL + ALT + D, on a dell computer before starting at startup of Windows.)  For other tests - Dell probably put on a partition or sent a CD with the machine that allows you to perform a battery of tests on the... video, audio equipment, etc.

  (2) a restoration clean install a factory should probably be made * if * hardware testing are in agreement.  You could probably clean the machine by following the steps I'll give you - but knowing no more about the problem that we are so far... If that does not better... it's perception, or something so serious, that a clean install is probably the only real 'next step '.

  (And if the new facility does not solve it and analysis of material found nothing - that's the perception, or something (material) defective which is not be picked up).

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information?

  Taché product key

  Hello

  I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information? The laptop currently has non-OS I've tried to reinstall.

  Thank you

  Scott

  Product keys are bit-agnostic - they don't care if it's 32-bit or 64-bit.

  However, cannot legally use the recovery disk from one computer to a different constructor machine - as other licenses are not properly paid..

  There is nothing nonetheless to try all possible variations on the absence of character (there are only 25, after all the )

  Other than that, your best option is to contact the manufacturer and order a set of recovery disc for the machine. I do no download available for Vista with SP2 - but you can download Vista with SP1 and create the disc.

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

• My kodakESP5 will not print all the object I want to print only a part of it

  My kodak ESP5 will not print all the object I want to print only a part of it

  Hi jakenny,

  You may need to replace an ink or toner cartridge. Check the status information in the queue for low ink or toner messages. If the printer has a status or display area, you can also check for low ink or toner messages on the printer itself. For more information, see change an ink or toner cartridge and view the print queue.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  See the link below and check the print settings.

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows-Vista/choosing-print-options

  Method 2:

  Try to update the printer driver which might help you resolve the issue.

  Click on the link below for more information on the updated printer drivers.

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Check whether the problem is resolved.

  For more information, please see the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  * Original title: SUPPORT of the PILOTS LOSE INTERNET.

  My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  What do you mean by "driver support?

  If you have installed one of these offers of support software driver, you have installed malware.  The vast majority of them no useful software and installing a lot of malware on your computer.

  The drivers are not the soft thing you should normally be updated.  I recommend the updated drivers only in the case of a problem that has to solve, and it's rare.

  Is the ONLY source, you should consider for driver updates or OEM support site.  Even those who sometimes go way overboard in trying to update the drivers.  The latest Dell systems are equipped with updated software that checks for new updates every day.   In most cases, drivers are rarely updated after the first year of a product.

• BlackBerry Q10 Q10 do not synchronize all the contacts

  I've updated the software several months ago and I was happy to find my BB works so much better.  He stopped from asking me to enter password Yahoo mail 2 - 3 times a day.  HOWEVER, I noticed that there not synchronize all the contacts in my Google contacts list.  I found two contacts that were missing, but there could be more, because I can't go through all contacts and to understand that it does not appear on my BB.  I also noticed that new contact that I enter on the BB is not always appear on Google Contacts and vice versa.  Any solution?

  I guess that's for companies only.

  https://support.Google.com/a/answer/53926?hl=en

  I went to Outlook.com which offers free the Exchange Active Sync. I recommend that you set up an Outlook.com account and just use it. You do not have yet to use/sync the email if you do not want. Just use it for contacts and calendar. I've dumped Google in total and could not be happier.