Table of contents: linking the titles and page numbers

Similar Questions

• Table of contents, separating the positions and Page numbers

  Hello

  I work with a table of contents in InDesign CC. Some of the titles that appear in the table will be very long and the next line. I want to wrap up before it hits the right hanging tab so that there is a visual separation between the page numbers and text. I understand that I can do it manually, but I want to do it consistently because it is a model for a large number of documents.

  Here's what I want it to look, the important thing is that the long position:

  1. regular position... 5

  1.1 regular subheading... 6

  2. long title that I hope

  a smart person would reduce

  down anyway............................................................ 8

  As opposed to:

  1.      Regular Heading...................................................... 5

  1.1 regular subheading... 6

  2. long title this person smart hopefullya would be

  cut down anyway..................................................... 8

  Any ideas? Is it possible to have an active table of content in a table? Or maybe something else? Expand on a second column?

  Well, looks like you know how to a negative indent on the left margin; you know, apply a few dash to the left margin, then some Indent first line. Look carefully at your dash controls in your toolbar: apply some indent right margin, then a few negative withdrawal of last line, and you can get your table of contents behaves exactly as you wish.

  I can take a few screenshots for you later if my description is not obvious.

• Table of contents for the issue of the ePub

  InDesign CS5; Mac OS 10.6.5

  When I export my TOC document to ePub, do not show the table of contents, only the last two pages with text and an image.

  The table of contents defined paragraph styles. I think I have my correct export settings.

  Help to isolate this problem is appreciated.

  Note: Display of other documents in the book via ePub export display correctly, although the book must refine to ePub format.

  Also, when I tried to export the entire book through the book panel, InDesign starts export, but no activity in the progress bar. I have to force quit to get out of the endless loop. Then when I restart InDesign, Untitled files begin to open, 10, 20 and so on. So, I have to manually close each file.

  I suspect that OCD is causing this issue.

  Yes, that's correct. Once I've re-recorded old files "CS" in the new version, including the file book. Everything worked well.

  And I don't mean just making a backup (thinking that will result in savings in the current version) I want to talk about a backup - as in another folder in a different location... ie you Office

• How to remove the header and page number when converting to PDF

  I am using Windows 7 and you have Acrobat 8.1 installed. When I right click on a .txt file and choose "Convert to Adobe PDF" in the context menu, it will save a pdf file in the same folder as my file with the same file name .txt. When I open the pdf file, there is a header with the file name and page numbers at the bottom.

  How can I adjust the preferences to omit the header and page numbers? I have a click with the right button on the Adobe PDF printer in the control panel "Printers" and looked through properties and 'Adobe PDF settings' in the preferences, but don't find any options for headers and footers.

  Thanks in advance.

  What you describe is based on the configuration of the running text editor.
  Here, the configuration is such that the content described is part of what is migrated to the PDF file when the PDF is created.

  Modify the appropriate configuration of the text editor and the created PDF will no longer spam.

  Example - using Notepad window:

  Click path = file - layout

  In the presented dialog box, you can adjust the configuration.

  While Acrobat "PDFMaker" allows configure us the interactive "improvements" and others as in a file PDF created, it is always application configuration of creating files creation that sets the 'meat and potatoes' of the content of the PDF created.

  Be well...

• Add text to the table of contents or the skin

  Hello

  I want to add text to the table of contents that shows all the time (is not clickable).  Is it possible to display some text of infomration on the bar of navigation/table of contents?

  Or is it possible to add it to a skin it will appear at the bottom of the screen?

  Any help would be appreciated.

  Thank you!

  Hi Julie,.

  You can try the project--> TOC--> Info it will open a dialog box where you can enter information about your organization, as well as a logo.

  In addition, if you wish, you can change a TOC and their default legend items.

  To do this, close Captivate.

  Open Notepad-

  Paste below-

  [TOCStrings]

  SlideTitle = Module name

  Time = time

  Status = status

  MoreInfo = my info

  Clear = Wipe

  ClearToolTip = State of Wipe

  BookMarkToolTip = book-marking

  NoSearch = String not found

  CurrTime = what

  ---------------------------------------

  Save it as TOCStrings.ini

  and place this file in the location of the Adobe Captivate installation on your machine.

  Now launch and add a table of contents to the Porject and preview or publish and see the change.

  Thank you

  Anjaneai

• How to set different fonts for numbers in the titles and tables of contents

  Hello

  I noticed some people to use a different font for the numbers in the titles and tables of contents to get an extra magic. Is it possible to automate the use of fonts in paragraph styles?

  Oh and suggestions on which fonts would be a good thing for numbers?

  Thank you!

  Furthermore, you must doany of this fancy stuff if you use an OpenType font that made OSF glyphs (and if you are not you will need to set the font as part of your style). Just head on to the style definition and enable OSF there OpenType features section.

• Table of contents links keep current zoom level do not zoom to full page

  When Indesign creates tables of contents, they automatically connect the paragraphs, links point to, so that in an interactive PDF, clicks and prods take the user to this page. Large.

  Is what is not so great that hypertext links / references / jump-links / whatever born behind the scenes within the table of contents seem to be:

  1. .. .be is automatically set to reset the zoom to width full page
  2. .. .not be changed somehow

  Normal cross references keep the level of zoom that the user chose and normal hyperlinks that point to a page in the document have a range of settings on this change of zoom level (if any) must be imposed on the user, which can be set to "inherit zoom".

  How can I set up a table of contents bothering users by resetting their chosen artitrary default zoom level when using the interactive table of content?

  I really hope that I don't have a gap table of content feature Indesign and create all the cross-references manually.

  (edited) So it turns out that you can "expand" a table of contents by copying and pasting - it fills the hyperlinks with links that can be edited (as above), but the auto-update breaks - there are a table of contents, they are just one block from text full of links. (I got different copies mixed up when I thought that the framework that the editable links was also-automatic update)

  Aging out of the links is a red herring, just something to do with the fact that they were on a master page.

  This means that a possible OCD workflow is:

  • Create a table of contents on the pasteboard somewhere.
  • Before finalizing the document, to update the table of contents and alt-do drag the table of contents 'live' creates an editable of 'dead' copy in a suitable place in the document
  • Change the properties of the links links in the 'dead' copy (remember that you can select several hyperlinks at once by holding down the SHIFT key and change things like the Zoom all at once with the hyperlink Options setting from the context menu of hyperlinks).

  Then if you make further changes to the document later, remove the copy dead, update and re - copy the live original and redo the changes to the new copy

  This isn't a bad way - it adds just on the work of a minute, each time you export a PDF file (delete and update TOC, alt drag, shift-select the new batch of.) XXXX links at the bottom of the hyperlinks Panel, > hyperlink, Zoom setting Options > Inherit Zoom, actually).

  Otherwise, you may build manually to a table of contents using cross references, if you want the links to the exact position on the page, not just the top of the appropriate page.

• How hide the table of contents in the body of an e-book?

  Hey people, I'm kind of a weird request. Do not forget that everything I know about InDesign, I taught myself for a month, so I can miss major somethng.

  As an intern, I am creating ebooks and I have to make sure that those I create the same look as the ebooks previously created for my employer (better yet, I had to do it from scratch!). In their previous ebooks (EPUB file format) the table of contents posted by the ereader clearly indicates a specific style of OCD was used to create (he titles and subtitles, so it is not just the default style that draws from the file names), BUT there is NO table of contents anywhere in the body of the ebook itself. There is also no blank page where a table of contents can be hidden with a hidden layer.

  I created a table of contents to match style to them, but I can't it appears in the drop-down menu Styles TOC when I go to export EPUB book file unless the document of the table of contents is also included in the book file, and as I said, I can't get the table of contents in the body of the ebook itself just in the menu that is displayed by an ereader.

  Any advice?

  Did you use dialogue style of content Table to create a new style of table of contents? If so, then the new table of contents style must appear in the drop-down list TOC Style selected in the dialog box in the Navigation options to export EPUB.

  Kind regards

  POOJA

• Several table of contents in the document

  Hello

  I'm new in the FM8. I recently received a document FM8. The structure of the document is:

  Each document file corresponds to a chapter. Each chapter has a table of contents for its secondary headings and paragraphs.

  Table of contents (here is the chapter of 1 to 10, that chapters)

  Is then Chapter 1 includes a table of contents with all subtitles and paragraphs (for example 1.1, 1.1.1 and so on)

  Chapter 2-10 similarly.

  This isn't everything.

  Chapter 7, 8, 9 and 10 are placed in different folders, corresponding with the title of chapters. The rest of them (Chapter 1 to 6) are placed in the same folder.

  For chapters 7, 8, 9 and 10, I managed to update the second table of contents (which contains subtitles and subsections - for example 1.1, 1.1.1 etc..)

  There is in the main folder that contains the rest of the chapters of the files of table of contents for the main Table of contents and the contents of subeahds and paragraohs corresponding to each chapter. Here, I have problems with their updated because when I opened the book and update only the main table of contents will be updated. The problem appears when I create a PDF file. Because after the creation of PDF when I click on a chapter name in the table of contents it will bring me to the chapter I want to but when I click on the table of contents for subtitles/paragraphs that has nothing happened, except for chapters 7, 8, 9 and 10.

  So, to be more explicit.

  When I click on Chapter 7 in format pdf, acrobat will send me to Chapter 7 where I find another OCD where if I click subead 7.3 that he send me to the page that includes the chapter 7.3. On the contrary if I click on Chapter 4 it will bring me to the page corresponding to Chapter 4, but if I click subtitle 4.3 that nothing will happen.

  I will attach an example of this PDF.

  The structure of the file looks like this:

  Chapter 7 the folder:

  -Book

  -The TOC file Chapter 7

  -Chapter 7 (same goes for Chapter 8, 9 and 10)

  The project folder

  -Book (it contains all files from Chapter 1 to 10)

  -File table of contents (the main table of contents)

  -Files table of contents of the chapters

  -files of the chapters

  Thank you. Any help will be appreciated.

  Excuse my poor English writing.

  Yours trully,

  Fagaras Codrut Sebastian

  It is characteristic: chapter TOC in Toolbox for X of FrameMaker.

  Now, the Toolbox for FrameMaker 7.0, 7.1, 7.2, 8.0, 9.0 download becomes available: www.toolboxforme.com/downloads

  There are purchase orders: for us alone, Germany and other countries: http://www.squidds.de/en/products/price-lists.html
  Please fill.  If you need the previous version of the Toolbox (6, 7, 8), then please write a note in the note field.

  -George

• The display speed of the content of the title attribute

  QUESTION: Where is the setting of the display speed of the content of the title attribute found?  Is there a CSS rule to change?

  Background: In normal circumstances delaying the speed is good and desirable.  In the absence of a link, however, this time is counterproductive.

  SOURCE PAGE: http://www2.gol.com/users/hsmr/emblem/name.html

  Roddy

  I beg of you.

  Yes, I have to use it, but not on what is currently live. I found it fairly easy to implement - as most of the Spry stuff, it's just a matter of style to a DIV tag and then initializing with a small script. I tested it in most browsers, Mac and PC - it worked even in IE6!

  The only drawback is that you must initialize each tooltip separately.

  I currently play with MooTools, which has the extension MooTips. MooTools has the advantage on Spry, as you need only initialize a class once and each DIV style automatically with the correct model would then be what you're after. I have not yet tried, but it might be worth a glance.

  MooTools is here:

  • http://mootools.NET/

  MooTips tutorial is here:

  • http://www.consideropen.com/blog/2008/09/30-days-of-mootools-12-tutorials-day-19-ToolTips/

  Have fun!

  Peter

• How place of content between the header and tabs?

  I have the header part which must be constant through the portal but below that I have 3 links
  as I AM an employee, employer, broker...
  
  which showed that in the homepage above the tabs...
  How can I do this...
  
  How place of content between the header and tabs...: () kindly help...

  Hey djo
  Try these approaches and see if it works.

  1. in the header Section, page footer you shell header and add a Portlet header. This JSP file associated header Portlet will be all static content in the upper part. In the lower part, add these 3 links say right. Show these links only based on certain properties of the query as isHome. Now for the main book House and another page associate a BackingFile. In this backup file in the lifecycle methods preRender or handlePostBack, get BookManager instance and all pages and see which page is active. For this page, see its page definition label which will be always unique. IF the page def label is like home_page_def (it is the wording of the page def you give to the homepage), then set the value of the key in the request as isHome = true property. The only doubt is after book backingfile is triggered, the header needs to be reloaded, because only then can he pick up the attributes of the request.

  2. create a new portlet as HomePageLinks portlet. Its title property is not Visible and other properties of the UI as NoBorder, etc. NoTheme. The associated JSP will be the 3 links you mentioned fixed right. You can use css styles to make it right. Now dropping this portlet in the header Shell box. You have already HeaderPortlet in the upper part, lower than that, you will have this portlet HomePageLinks. Now associate a backup file for this Portlet show, only if the current active page of books is the home page comparing the label def etc. as mentioned above.

  In both scenarios, only concern is when clicked on different Pages, the entire portal is to be made directly from the header at the top. Only then the backup file will be set the key and the portlet HomePageLinks can show or hide as a result.

  Try to raise an event when the user clicks on the homepage. This port listening for that event can be HomePageLinks Portlet. I guess the event mechanism should work regardless of where the portlet is placed. In the event listner, see if you can show/hide this portlet.

  The only challenge is reloaded must section header whenever you click on a tab.

  Start putting a few files of backup and System.out.printlns to see if the header section gets recharged on, click on the tabs.

  These are just my thoughts on the top of my head. Other users of the forum may have better alternatives or a different version of the above approaches.

  Thank you
  Ravi Jegga

• Table of contents of the printed Documentation

  How can I specify the location of the table of contents in the printed documentation? I would like it to appear after the title page, but it still appears before her.

  It's true. The title page which is created by the printed documentation is a default start page that you have little control over. If you imported a word document that already contains a title page that does not appear before the table of contents because the HR doesn't recognize it as such. Those of us who create print usually do as you describe. We create a generic title page that is stored in a separate word file. Then we generate the output and copy the frontispiece. You need to remove the title page of the printed good documentation process, otherwise you'll end up with both of them! I hope this helps.

• Indented in the table of contents is not retained in the table of contents of the document

  Hi all

  I use RH7 on a Windows XP Professional platform.

  I am generating documentation and indentation in the table of contents generated in the document is not the same, not even close, as the project.

  I tried to use HTML heading levels maintain checkbox, but while titles fonts are better, indentation in the table of contents for the document is getting worse.

  When I disable this checkbox, it will give me a decent indentation in the table of contents, however the fonts used for headings in the document are sometimes more small then one used for normal text.

  Does anyone has an idea how I could fix it? I don't want to do too much formatting in the Word document either, because it takes a long time.

  Thank you

  Thus in the document that you want to book either title 1 and 2 book 2 and in the table of contents you want this?

  

  As you can see, this is what I have in the TOC and the body is as described above.

  If you select HTML to maintain levels, you will always get the above with the titles of books but third topic will become a heading 1, as it should with this option checked.

  I maps to a Word template where the TOC styles are defined to be indented as above. Maybe you have to match to a Word template, or if you are, you just need to tweek styles in it.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• How insert/edit a table of contents in the Bookmap?

  Hi all

  I am quite puzzled, how to use a bookmap to create a full PDF with table of contents to FM9? Everyone (well almost...) wants to OCD but I found nothing in the help and did not try it myself. It seems that I would need to insert a table of contents in the frontmatter section.

  Please excuse if there is already a thread, a link would be useful I have search but can't find this problem in the forum. Maybe it's so simple that I'm the only guy to have problems.

  I also read in FM10 help but found nothing there either. All information is available from adobe at all? Update to FM10 would be an option if needed.

  Hi Robert...

  FM-DITA (any version) does not support the automatic generation of a table of contents, Index, etc. a bookmap book lists entry. To create a generated list, you must manually add this element in the generated directory file and regenerate your book. You'll want to do it anyway so that you can assign paging and numbering and apply special models. This procedure is still the best way to manage the map of generating the address of the DITA standard FM...

  http://KB.leximation.com/DFM/?kbid=4

  Other hand (here is the sales pitch)... If you use DITA-FMx, it is provided automatically. Once you have set up the INI file of book-building with the properties and characteristics in the book, lists of books that add you to the bookmap will become good listings and all your pagination and numbering is applied correctly (in addition to loads of other features).

  http://leximation.com/DITA-FMX/

  See you soon!

  .. .Scott

  Scott Prentice

  Leximation, Inc..

  www.leximation.com

• Why does my merged project display 2 table of contents for the first project/start?

  I use RH8 and windows 7 and generate Webhelp

  When I generate my merged project I get 2 table of contents of the first project. When I click on other merged projects disappears from the table of contents 2^nd and all is well.

  Also, I can't return to my first / start window.

  Here is what I created:

  Main folder

  Parent

  Children

  Project 1 (this is my start/welcome page)

  Project 2

  Project 3

  Project 4

  My Parent file in the table of contents contains new projects and looks like this:

  Project 1

  Project 2

  Project 3

  Project 4

  The only section in the parent file is empty and I put in the following redirection according to the instructions on the site grainge:

  "< meta http-equiv ="refresh"content="0;url=./mergedprojects/project1/project1.htm "/ >

  How stop the TOC 2 on the first page of the project start and how do I display so I can access it later.

  Any help is appreciated.

  Pat

  The start page is not a topic. This is what opens the three components and the topic you see in that is the default theme.

  By default, HR takes the name of your project and which initially applies the page so if your project is called redrabbit, the start page will be redrabbit.htm.

  Many authors can call the redrabbit of the theme by default as it is the name of the project and it seems logical.

  Problem is when the wizard attempts to use it as the default value for the start page, the name is used for the number 1 is added.

  This means that you end up with redrabbit and redrabbit1. If you look in the wizard, you will see the name of the start page, first on the ground. You do not redirect, that redirect you to the default topic that is longer than down in the page of the wizard. The index is that the field is called the default theme.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge