Table with fixed header and the left column

Similar Questions

• How to create a table with no lines to the left or to the right?

  If I create a table with say 5 columns and 15 lines, how not to do a vertical line (border) to the left and to the right of the table while keeping the boundary up and down? Is that possible or I just put a white box on the left and the right?

  IDCS3

  There are a few methods that work. Here is one.

  (1) select your table cells

  (2) open the race Panel

  3) click the blue lines of the proxy image in the Panel of stoke to deselect the lines inside and high and low lines

  (4) 0 the value of the weight of the race (or change the color of the None swatch)

  

  Oh and for the love of your fellow designers or the person that allows you to edit your work in the future... do NOT use a white box to hide the traits of lines and columns in the table.

  HTH

  -mt

• I have a table with a city of the column. Values are 'delhi' and 'hyderabad '.

  I have a table with a city of the column. Values are 'delhi' and 'hyderabad '.

  as

  ID |   City

  ---------------------------

  1     |  Delhi

  ----------------------------

  2     |  Hyderabad

  Now, I have to update Delhi and Hyderabad Hyderabad with Delhi.

  How to do this?

  Hi Indi,

  (1) why do you want what it? Requirements of companies?

  (2) how much these values you want to reverse? Is it only "Delhi" and "Hyderabad", or there is a list, or other logic?

  Update your_table

  Set city = decode (lower (city), 'delhi', 'Hyderabad', 'hyderabad', 'Delhi')

  where lower (city) ('Delhi', 'hyderabad');

  Does that help?

• Cannot find the left column that used to be on the documents and photo files.

  Cannot find the left column that used to be on the documents and photo files. On this missing column I know was there before, had options fax, copy and other things we could do with these files. I want to get that back. Thank you.

  With my Documents folder open, go to Toolsand then click on Options files . On the general tab, tasks section, choose Show tasks in folders.

  I would like to know if it works. Thank you.

• MISSING LAYOUTS - 2 column fixed, bar right side, header, and footer column 3 fixed, header and footer

  I use Dreamweaver 2013 and when I go to file, new and select new document, model HTML. My two page layouts (2 fixed column, right sidebar, 3 column AND header and footer fixed, header and footer) does not appear, instead it just says: < no >. Why this happens and how to fix this! Please help me!

  As I thought.

  You do not have these models it is because you are using the current version of DW CC 2015.

  These models have been deprecated / replaced by newer models of Bootstrap.

  You can read about the changes of product below.

  New features of CC 2015

  https://helpx.Adobe.com/Dreamweaver/using/whats-new.html

  If you are a Subscriber payment & your computer OS is Win7 or Mac OS x 10.7 (or an earlier version),

  You can fall back to a previous version of DW as most close as possible to your manual.

  Otherwise, you're out of luck.

  Nancy O.

• Can not see the left column with "Inbox, JUNK e-mail, deleted, sent.

  All of a sudden I can't see the left column of Windows Mail-"Inbox, drafts, SPAM, messages deleted" etc.  Top of the page of office can be reduced manually

  View | Page layout | List of folders. Check it out.

  PS WinMail is a Spam folder.

• How to build a list or a table with fixed values?

  Is it possible to create a list or a table with fixed values, but with a variable length?

  for example:

  var columns = "name, age, function;

  var insertParams = generateList ( listLen (columns), ',','.) » ); *

  fact: insertParams = ',?,??

  
  

  * (this function does not exist. This is just to illustrate what I need)

  I know that this feature is easily created by creating a loop, but I was wondering if it was possible with a single line of code.

  Thank you

  If he can generate a table in the same way, which would be as well.

  Our messages have clashed. But I think that repeatString() would do the trick. You could cut the rear comma with left() or convert it to a table. By default, ListToArray() will silently ignore the trailing comma.

• An e-mail account does not appear in the left column of Thunderbird.

  My computer (Windows XP) has two e-mail accounts and local folders that display correctly under "Accounts Mail and News" in the troubleshooting information. But Thunderbird has stopped to show one of the accounts in the left column (the directory structure) of its start page. This account was created many years ago that the messages are placed in the local folders Inbox instead of in the Inbox of the email account (Finally, I think that Thunderbird is confusing on what is meant here), but it has worked well until recently, and for this reason I can still use the email because the Inbox of local records etc. are visible. But because this email account is not on the left, there is no way to get on the right corresponding a sign "Email, accounts and advanced features". The second e-mail account (created as a test because there was this problem) is functioning normally. I tried the fix described in questions/1141037 but nothing has changed. How can I get this account to display?

  It's probably a POP-connected account and a game, like you, to use the global Inbox.

  Open the account and settings in the server settings pane, click "Advanced". He was to use the global Inbox?

  The definition of use its own Inbox should make re - appear in the list of Auditors.

• How to set the width of the left column?

  Hello

  I use model universal and APEX 5.0.3. I use the "left column model" of a page.

  I would like to increase the width of the left column. I have to unsubscribe from the master Thme? It does not seem desirable because "'to unsubscribe a theme will prevent future updates to the theme applied"; "

  So how to change the width of the left column?

  Thank you.

  Hello

  * arrg * navigation bar does not work with the current version of the plugin.

  In this case, take a look at the plugin and find the definition of the left box. You can find parts to copy into your page.

  Best regards

  Tobias

• I want to get only year sysdate with my name of the defined column. but not able to get it.

  I want to get only year sysdate with my name of the defined column. but not able to get it.

  SQL > select to_char (sysdate, 'yyyy') as 'mahesh tyagi' from dual;

  Mahé

  ----

  2015

  SQL > select to_char (sysdate, 'yy') as 'Manu' from dual;

  my

  --

  15

  So I couldn't do 'Manu' or "mahesh tyagi" as the column name.

  The column name is "mahesh tyagi" is simply displayed it shortened to sqlplus due to the known values in the column length.

  create table year_test select to_char (sysdate, 'yyyy') "mahesh tyagi" double;

  year_test / / DESC

  You can change the way sqlplus displays the header of column with something like

  column "mahesh tyagi" format a15

• How to upgrade are the value of the column and the new column value created

  Hi all

  create the table xxc_temp

  as

  Select donnees_1 'AB103', 'AAA' data_2 data_3 '123', 'RED' data_4, NULL status in all the double union

  Select donnees_1 'AB105', 'BBB' data_2, '222' data_3, data_4 'BLUE', NULL status in all the double union

  Select donnees_1 'AB106', 'CCC' data_2, '333' data_3, data_4 'BLUE', the double NULL status

  create the table xxc_base

  as

  Select donnees_1 'AB103', 'AAA' data_2, '123' data_3 data_4 'RED', 'Inactive' status of Union double all the

  Select donnees_1 'AB105', 'BBB' data_2, '222' data_3 data_4 'BLUE' status 'Active' of all the double union

  Select donnees_1 'AB106', 'CCC' data_2, '333' data_3, data_4 'BLUE', 'Inactive' status of double

  I need to update the status column xxc_temp with xxc_base value of the status column and also if the user tries to insert new values/lines in the xxc_temp

  So how can I update the status column? I mean automatically set to day and also new values/lines

  I need to update only that are Inactive then these lines should be updated in the temporary table

  We can do this by using the stored function, but I need to update the new status of lines also

  Please help me

  Here's another way to do it, using VIRTUAL function column as expression to get the status of the other table

  CREATE or REPLACE FUNCTION GET_STATUS (pDATA_1 IN TANK) RETURN VARCHAR2 DETERMINISTIC

  AS

  vstatus VARCHAR2 (8);

  BEGIN

  SELECT status in vstatus FROM xxc_base WHERE donnees_1 = pDATA_1;

  RETURN vstatus;

  END;

  /

  DROP TABLE 'XXC_TEMP ';

  CREATE TABLE 'XXC_TEMP '.

  ('DONNEES_1' CHAR (5),

  "DATA_2" TANK (3).

  "DATA_3" TANK (3).

  "DATA_4' VARCHAR2 (4).

  'STATUS' VARCHAR2 (8) GENERATED ALWAYS AS (SUBSTR (GET_STATUS (DATA_1), 1, 8)) VIRTUAL

  ) ;

  INSERT INTO 'XXC_TEMP' (data_3, donnees_1, data_2, data_4))

  Select "AB103' donnees_1, data_2 'AAA', '123' data_3, 'RED' data_4 of any double union

  Select donnees_1 'AB105', 'BBB' data_2, '222' data_3 data_4 'BLUE' of all the double union

  Select donnees_1 'AB106', 'CCC' data_2 data_3 '333', 'BLUE' double data_4);

• Fixed header and anchor tags

  Warnings: I am new to this forum and use HR 2015 since the end of May. I am somewhere between beginner and intermediate with CSS and HTML, and I don't know anything about javascript or JQuery.

  I tweaked the catalogue office with multi-screen presentation homepage so that it has a fixed header and content scrolls to the top under the header. It works well and looks beautiful up by clicking on a link to an anchor, for example when using the MiniTOC to navigate through a topic. The anchoring of the charges under the heading at the top of the window of the browser instead of under the header at the top of the visible space.

  After studying the problem, I had hoped that I had found a fix to it that hashtag connects this whim is the browser window, but it did not work.

  More research and digging in HR how to configure its bookmark anchors and found out that bookmarks are configured with one

  < a name = "blabla" > < / a >

  tag for anchors instead of one

  < h1 id = "blabla" > blah di blah < / h1 >

  tag.

  According to W3 Schools, "the < a > name attribute not is not supported in HTML5. Use the id attribute instead. "It's disappointing, given that the choice of output is Multiscreen HTML5.

  Can anyone offer a solution that works with apparently outdated HR < a name = "MiniTOCBookMark1 > < /a > format?"

  Thanks in advance!

  P.S. I am posting this at the end of the day and I won't work again until the morning of August 22, 2016, so if I do not answer questions of clarification immediately, please don't think I'm ignoring you.

  I have a header no scroll, and I just added the following to my screen layout stylesheet (targeting IE only):

  a[name]                    {

  padding-top: 130px;

  }

  Adjust the value of the pixel to function.

  I had a play on Chrome, and seems the following to run it:

  {[name]

  padding-top: 130px;

  margin-top:-130px;

  Display: block;

  }

• Cannot find folders in the left column under the hard drive.

  I can't see all the folders of photos already imported and edited. I can go to them in Solution Explorer and do a right click and use (open with lightroom), but can't find the hard drive in lightroom. I have put some things in the wrong sense behind lightrooms. already moved files of photos that I moved. applications must always appear with a (?) on their right? I'm also fairly new to lightroom and don't know if I'm trying to open them the correct way. do I need to import each time? thought I should be able to just go on the hard disk on the left column and find the files.

  P.S., im using windows if that makes a difference.

  Any help is greatly appreciated. Thank you.

  do I need to import each time?

  This is a no!  Lightroom will only store a reference to a photo (and record) in its database.

  Re: files Panel - some facts-

  The "Files" Panel may not appear on the left of the screen.

  

  To restore it is visible, click on any of the other Panel headers and check the line "folders."

  

  Kids 'Triangles' when you click Open or close the drives and folders that you have imported into lightroom. (and ONLY records! nothing else)

  

  If your folders are visible and they do not present a [?], then they have been moved or renamed in the OS and Lightroom now does not know their whereabouts. The LR catalog database knows the original location of the files when you did import.

  You will need to know where, or which is named, files are now and the re - link in Lightroom.

  How to create and manage folders in Photoshop Lightroom

  How to find missing photos in Photoshop Lightroom

• Illegal white space between the header and the body.

  Hello;

  I make a web site that I broke into pieces. A header, fooer, nav and implementation of main body.my and cannot find a way to make it work properly. It only happens in Internet Explorer, it's very nice in all other browsers. Between the cfinclude header.cfm and the body of the page, I have a horizontal white line, I can not make disappear. They should sit tight with nothing in between. I tried css, play with the table for the header and the body, and it's still there.

  Anyone know how to do this, go away? Here is my set to the top:

  It is the code of the page, maybe I'm missing something here?

  < body bgcolor = "#FFFFFF" bottommargin = "3" valign = "top" leftmargin = "0" topmargin = "3" marginWidth = "0" marginheight = "0" onLoad = "preloadImages (); ">
  < div align = "center" >
  "< cfinclude template ="... / header.cfm ">"

  < table width = "849" valign = "top" border = "0" cellspacing = "0" cellpadding = "0" style = "" border-top: none; ">"

  any body content goes here

  < /table >

  "< cfinclude template ="... / footer.cfm ">"

  < / body >

  Here is the table header.cfm:

  < table width = "852" height = "133" border = "0" cellspacing = "0" cellpadding = "0" style = "" border-bottom: none; ">"

  the content of the header is here

  < /table >

  I tried a number of different ways to do this, go away. It's just what happens. Someone has ideas how to make this stop and become close to each other?

  Thank you.

  In addition, you need to add

  Display: block;

  for images in the same row.

  Oh, and if you decide that you don't mind not only user-increases in the mess of text with the appearance size, you can also set the attribute vAlign on 'down' instead of the current "top" for cells in this row.

  --

  E. Michael Brandt
  
  www.divahtml.comwww.divahtml.com/products/scripts_dreamweaver_extensions.phpStandards-compliant scripts and Dreamweaver Extensions
  
  www.valleywebdesigns.com/vwd_Vdw.aspJustSo PictureWindowJustSo PhotoAlbum, et alia
  
  --
  

• need to reduce space between chips in the lists and the left margin. Help

  Anyone know how to reduce the space between the bullets and the left margin?  the indentation is just too.

  Thank you

  These values are not good for me in FF, on yoru page.  Maybe try:

  UL {}

  padding-left: 16px

  }

  Here's how:

  Replace:

  
  
  with:
  
  
  
  OR
  
  simply select the list in Design View, then select teh 
   tag on the Tag Selector Bar at the bottom ofthe Design Window.  Then in the CSS Window, click the + icon at the bottom of that window.The CSS window will open.  Choose "Advanced" and be sure it says 
  
  #healthvideoContent ul 
  
  in the field there and then 
  
  choose to create this selector in a new style sheet or in "This Document Only", click OK and then choose"Box" in left column, untick the "Same for all" box and enter 16 in the padding-left field.
  
  whew....
  
  -- 
  
  E. Michael Brandt
  
  www.divahtml.comwww.divahtml.com/products/scripts_dreamweaver_extensions.phpStandards-compliant scripts and Dreamweaver Extensions
  
  www.valleywebdesigns.com/vwd_Vdw.aspJustSo PictureWindowJustSo PhotoAlbum, et alia
  
  --