Tables of writing with keys

Similar Questions

• Problem using applescript to put data into the table of numbers with column heads

  I have extracted the data from certain Web pages and want to place the data items in a table of numbers.  I wrote the applescript to extract pairs of data into two lists, but encountered a problem when you try to put the data items in a table of numbers.

  I hope I've isolated the problem eventually reduce version of the data table and writing.

  Calendar_Month	Alvarez	Laundry	Linen	Products
  March-2014
  April 2014
  May-2014
  Totals:	0.00	0.00	0.00	0.00

  Define theLabels to {"Alvarez", "Flax", "Laundry", "Products"}

  the nominative value {11, 22, 33, 44}

  Tell application "Numbers."

  say table 1 on sheet 1 of 1

  rowIndex Set of 3

  q Set of 2

  say the line rowIndex

  colHead theLabels point q value

  the columnIndex value address column colHead

  tell the cell (columnIndex)

  value defined in point q of the nominative case

  tell the end

  tell the end

  tell the end

  tell the end

  I arbitrarily chose to line 3 of the table to demonstrate the problem.

  Each data item is associated, due to its position in the list, with a label that determines the column of the data table, where it should be placed.

  The illustrated script pitches the 2nd data element in the list in the column headed "Lin".  This seems to work ok.  But if q is set to 1 the script fails with

  get address of column "Alvarez" in line 3 of table 1 to sheet 1 of the document 1

  -> error number - 1728 column "Alvarez" in line 3 of table 1 of sheet 1 of document 1

  It fails also with q the value 3 or 4.

  I probably did something really stupid, but I can't understand this behavior.  Advice please?

  Under: Numbers v.3.6.1 Script Editor 2.7 2.4 OS X 10.5.5 Applescript

  Two questions.

  (1) the order of the text in theLabels = {"Alvarez", "Flax", "Laundry", "Products"} and differ from the order of the text in the header row. Is this correct?

  (2) you are putting the value 22 (point 2 of nominative) in cell D3, where column heading of D = "Flax", which is article 2 of the theLabels?

  Respect,

  H

• (table of filling with data series) want table con datos serial

  Hola todos

  Tengo el siguiente problema put los datos back sensores fijado por el deseo series in a table, cada envio una palabra clave recibo 10 siguiente manera, ahora 0224,1023 datos are separo el chain y los convierto en numericos. El problema radica in than recibo los datos y los coloco en el table pero cuando cuando recibo otros 10 mas put in el table continuando siguiente linea desde los datos, lo what I need are my mantenga el table con los datos anteriores y cuando otros 10 reciba to borre el table y nuevo in the linea comienze 0

  in the first image is ve como's van while el pero Necesito UN Québec table me quédé como in the segunda vez as reciba los nuevos datos cada imagen

  the thank su ayuda is not to do

  Hello everyone

  I have the following problem will place two data received by sensors series in a table, each sending a key word to receive 10 facts, 0224.1023 is now following, I separate the string and turn them into digital. the problem is that I recover data and place it in the table but when when I receive another 10 data but their place in pursuit of the next line, what I need is to keep my table with previous data and when you get the other 10, the table and repeat is disabled on line 0

  in the first picture looks like they fill the table, but I need to keep me and the second image whenever you receive new data

  

  Hola aleramir

  You cuento that no me sirvio por ese lado pero prevalence hacerlo the siguiente forma y works exelente

  despues voy activar el boton don't con el programa no manual, igual manera you thank you answer

  

• If you select value of LOV gets this oracle.jbo.InvalidOperException: No. JBO-34014 no child node found for line with key:oracle.jbo.Key when inserting line

  I use JDev 12 c on Windows 7 Pro

  I do a CreateInsert in ADF button on af:table. The model is set up so that T1 is one to many with t2, t2 is one to many with t3.

  I have recordings in t1 and t2, and trying to insert a record into t3.

  After I click the button, two of the three PK columns have values of t2. The third column is served by LOV. I open the LOV and select a value, and I get this exception:

  oracle.jbo.InvalidOperException: Houston-34014: no child node not found for line with key:oracle.jbo.Key [79449 Xnnnn-nn-X-nnnn null] under parent node: root

  at oracle.jbo.uicli.binding.JUCtrlHierBinding.bringNodeToRangeKeyPath(JUCtrlHierBinding.java:875)

  at oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding.bringNodeToRangeKeyPath(FacesCtrlHierBinding.java:121)

  at oracle.adfinternal.view.faces.model.binding.RowDataManager.setRowKey(RowDataManager.java:131)

  to oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding$ FacesModel.setRowKey (FacesCtrlHierBinding.java:951)

  at org.apache.myfaces.trinidad.component.UIXCollection.setRowKey(UIXCollection.java:553)

  at org.apache.myfaces.trinidad.component.UIXTable.setRowKey(UIXTable.java:768)

  at org.apache.myfaces.trinidad.component.UIXCollection.broadcast(UIXCollection.java:188)

  more of the stack trace was stopped for brevity.

  I've seen other posts related to this exception but no solid answers. I tried a few suggestions but nothing worked.

  If I remove the 3rd key I can insert a line, but on the second row, I get an error indicating that the primary key violation. It's like the page checks the constraints of the entity before the validation.

  Insert in this table works fine in the tester model.

  Thank you

  Dave

  And by LOV you mean: af:inputListOfValues?

  It usually works within the af: table if you VO with composite key.

  Maybe you can set ChangeEventPolicy = none on your iterator, but it will probably not help.

  Dario

• Feature line with key oracle.jbo.key is not found

  I've seen similar issues posted here but no go in enough detail to help me solve the problem I have just started using Oracle ADF a few hours ago.

  I have connected to our oracle successfully database and set up the display of an entity based on a base table which seems to have worked very well. When I run AppModule I see all the fields of the fine table, but when I change a content of columns to a valid value, and then click validation I get this error: "line entity with key oracle.jbo.key [all fields in table] is not found in the table" even though I don't know why, because it is without a doubt.

  The base table is a table of configuration when a new record is added manually a sequence is triggered to autopopulate the column id of the table. I read that this trigger could be the problem but I'm not sure why, as I'm only an update on an existing id, not create new ones?

  User, tell us your version of jdev, please!

  The framework must be a primary key defined on a table that you want to update. It will be weird if your doe not table a PK. define a pk in the table (if you cannot change the db, you can define the pk in the framework and try again.

  Timo

• ORA-02266: permit to unique/primary keys in table referenced by foreign keys

  Hello
  I'm trying to delete data from a table by dropping a partition. I've identified all the child tables by running the following command.
  
  Select "select count (*) from ' |" table_name |' where employee_id = 100; »
  of dba_constraints
  where constraint_type = 'R '.
  and r_constraint_name in
  (select constraint_name from dba_constraints
  where constraint_type in ('P', 'U') and table_name =' EMPLOYEE);
  
  
  "SELECTCOUNT (*) OF | TABLE_NAME | "WHEREEMPLOYEE_ID_ID = 100; »
  -----------------------------------------------------------------------------------------------
  Select count (*) in the PT_ORDERS where employee_id = 100;
  Select count (*) in the PT_DEP where employee_id = 100;
  Select count (*) in the PT_SKILLSET where employee_id = 100;
  
  I dropped the score for number 100 in all child tables. The count (*) select returns 0 rows for each of the foregoing.
  
  When I try to run the command on the EMPLOYEE table, below I get ' ORA-02266: unique/primary keys in table referenced by foreign keys enabled.
  
  Drop partition ALTER table EMPLOYEE EMP_ID_100;
  
  I don't see why I am unable to give up this partition now because it is data child present in any of the referenced tables. Any suggestions or help on this would be greatly appreciated.
  
  Thank you.
  
  RGS,
  Rob

  You must first disable foreign key constraints and delete the partition. Deletion of lines or a fall in childs partitions do not work in this case
  as you have the overall dependence:

  
  
  SQL > create table scott.t (x int primary key, int y)
  
  2 partition by (list (y)
  
  3 values p_1 (1) partition, partition values p_2 (2))
  
  4.
  
  Table created.
  SQL > create table scott.t_c (x int references scott.t (x), int y)
  
  2 partition by (list (y)
  
  3 values p_1 (1) partition, partition values p_2 (2))
  
  4.
  Table created.
  SQL > insert into scott.t values (1,1)
  
  3 N
  1 line of creation.
  SQL > insert into scott.t values (2,2)
  
  3 N
  1 line of creation.
  SQL > insert into scott.t_c values (1,1)
  
  3 N
  1 line of creation.
  SQL > insert into scott.t_c values (2,2)
  
  3 N
  1 line of creation.
  SQL > commit;
  Validation complete.
  SQL > alter table scott.t_c drop partition p_2.
  Modified table.
  SQL > alter table scott.t drop partition p_2.
  
  ALTER table drop partition p_2 scott.t
  
  *
  
  ERROR on line 1:
  
  ORA-02266: permit to unique/primary keys in table referenced by foreign keys
  SQL > select constraint_name from dba_constraints
  
  2 where owner = 'SCOTT' and constraint_type = 'P '.
  
  3 and table_name = 't';
  CONSTRAINT_NAME
  
  ------------------------------
  
  SYS_C0011058
  SQL > select constraint_name from dba_constraints
  
  2 where owner = 'SCOTT' and constraint_type = 'R '.
  
  3 and r_constraint_name = "SYS_C0011058";
  CONSTRAINT_NAME
  
  ------------------------------
  
  SYS_C0011059
  SQL > alter the constraint to disable scott.t_c table SYS_C0011059;
  Modified table.
  SQL > alter table scott.t drop partition p_2.
  Modified table.
  SQL > alter table scott.t_c enable novalidate constraint SYS_C0011059;
  Modified table.
  
  

  I guess you should consider options such as partitioning Referencial (with some restrictions).

  Best wishes
  Dmitry.

• ORA-02449: unique/primary keys in table referenced by foreign keys

  SQL > create table empinformation
  () 2
  primary key pk_empinformation number (6) 3 forced mobileno
  4 address varchar (100),
  5 salary number (10),
  6 personalid varchar (10) constraints fk_employees_section references employee (emp_id));
  
  Table created.
  
  
  SQL > drop table empinformation;
  
  ORA-02449: unique/primary keys in table referenced by foreign keys

  solution

  This error happens when the foreign key of a table is referenced by the primary key of the other table.

  If you want to remove the table had refernce key then, you must
  need to remove this table with the foreign key is referenced.

  or

  SQL > drop table EMPLOYEE CASCADE CONSTRAINTS;
  Deleted table.

  This will remove the table parent without droping the child table.

  Published by: Ritesh Singh October 3, 2011 14:04

• JUCtrlHierNodeBinding: No definition of node corresponding to line with key

  JDeveloper 11.1.2.0
  
  Model AM Tester provides data but trying to create the search form and it returns together empty.
  
  JUCtrlHierNodeBinding < JUCtrlHierNodeBinding > < convertRowsToNodes > [7342]: no definition of node corresponding to line with key [PrimaryKey1]
  JUCtrlHierNodeBinding < JUCtrlHierNodeBinding > < convertRowsToNodes > [7342]: line class name: model.framework.MyViewRowImpl
  JUCtrlHierNodeBinding < JUCtrlHierNodeBinding > < convertRowsToNodes > [7344]: no definition of node corresponding to line with key [PrimaryKey2]
  JUCtrlHierNodeBinding < JUCtrlHierNodeBinding > < convertRowsToNodes > [7342]: line class name: model.framework.MyViewRowImpl
  JUCtrlHierNodeBinding < JUCtrlHierNodeBinding > < convertRowsToNodes > [7346]: no definition of node corresponding to line with key [PrimaryKey3]
  JUCtrlHierNodeBinding < JUCtrlHierNodeBinding > < convertRowsToNodes > [7342]: line class name: model.framework.MyViewRowImpl
  
  Where
  SerializableAttribute public class MyViewRowImpl extends ViewRowImpl {}
  
  }
  
  What would be wrong?

  When you view the contents of the table or treetable, is the primary column for VO available in pagedef?
  Can you ensure that the primary column for the VO is available in pagedef and restart page?
  Well, will NOT show you the key in the page of the user interface, but you would need on the pageDef file.

  Thank you
  Nini

• I own 2 TC4200 both with keys product without disks!

  I own 2 TC4200 both with keys product without disks!

  In fact, I have a full set of drives somewhere in my house, but I don't know where.

  Now what should I do?

  Jim

  Hello:

  If you live in the United States, you must call this number you have a notebook of class business.

  1-800-334-5144

  If HP has more discs for your model, you can always get a game from this provider on the link below.

  http://www.computersurgeons.com/p-18001-recovery-kit-380428-B25-for-hpcompaq-model-number-TC4200-tab...

• Table 1 d with rejection of the two consecutive points

  Hello

  I have table 1 d with 10 measuring points. I treat points in pairs and according to the difference between two consecutive points, I have decision weather the two points must remain in the table or should be rejected. For example, my 1 d table looks like this: 10, 20, 30, 35, 40, 44, 50, 51, 60, 69. I calculate the difference between consecutive points by pairs: 20-10 = 10, 35-30 = 5, 44-40 = 4, 51-50 = 1, 69-60 = 9. I would like to reject the table points with the value of the gap less than 2. In my case, the points are 50, 51 and the table after the rejection should have 8 items and look like this: 10, 20, 30, 35, 40, 44, 60, 69. What is the most elegant way to do it? I'm in LabVIEW 8.6.

  Thanks in advance!

  Review your original message and your example to better understand your stated requirements.

  "I treat the couple points."

  You have to take into account only the pair of 1st and 2nd point, then don't take into account the point of 3rd and 4th pair so on and so forth.

  Never consider the 2nd to 3rd or her never consider the 4th to the 5th, so on and so forth?

  What is your table? If it is very large (1000000 points), you may need to consider other options for the use of memory and speed.

• Unable to draw the table 1 d with a cluster of 2 items on a XY Chart

  I am unable to draw a table 1 d with a cluster of 2 items on a XY Chart. The data displayed at the entrance in the graph, but nothing is drawn. I'm trying to draw a line connecting each point generated.

  You need a registry change on the inside of loops as well.

  But beyond that, you create too complicated a structure.  You create several plots of 1 point and not a single multipoint parcel.

  See attachment for the change that works.

• touch input with key Tip 2

  I need driver for touchsmart IQ512 to win 8 subscribe to the touch input with key Tip 2

  Required Touchdrivers for your system would be available via Windows update. You can even try to download the drivers from the following link:
  http://www.NextWindow.com/assets/files/NWFilter1.4.0.0.zip

• I have Asus EeeBox bought with XP preinstalled. I formatted and installed XP Home different reception of the CD of XP with key EeeBox COA. Is - this perfectly legal according to the policy of Microsoft?

  I have Asus EeeBox bought with XP preinstalled. I formatted and installed XP Home different reception of the CD of XP with key EeeBox COA. Is - this perfectly legal according to the policy of Microsoft?

  It is the key which is the basis of the license, rather than the disc.

• How to reduce the height of a table which is with PanelCollection and pc will find panelbox and pb is panelgridlayout and pgl is at the center of tableFirstTemplate?

  Mr President.

  How to reduce the height of a table which is with PanelCollection and pc will find panelbox and pb is panelgridlayout and pgl is at the center of tableFirstTemplate?

  Concerning

  Normally at the height of the table control you need property autoheightRows -1 and then set height in the table like this inlinestyle

  height: 300px;

• How can I create a slide show with keys working on an interactive InDesign document?

  I am trying to create a slideshow of images with keys working on an Interactive InDesign document and followed the steps of "InDesign CC Classroom in a Book", but when I saw the document as they do not seem to work, I had the idea where I went wrong, can anyone help?

  Why do you have it convert again? It is no more a button. And the action the button must be on the release or press.

  And to be more specific. Interactive document doesn't mean anything. What's your game to end here? EPUB? Publish online?