Take more time to start after changing Windows startup sound

Similar Questions

• MY VAIO LAPTOP(VGN-CR353) RANDOMLY STOPS AND TAKES MORE TIME TO START. SOMETIMES IT STOP WHEN STARTING

  MY VAIO LAPTOP(VGN-CR353) RANDOMLY STOPS AND TAKES MORE TIME TO START. SOMETIMES IT STOP WHEN STARTING

  It seems that the laptop may be overheating.  Are you sure there is enough air past for laptop?  Make sure that it is on a flat surface, with nothing to obstruct the ventilation openings.  Make sure that the vents and fans and heat sinks are free from dust - examine their blowing with compressed air (power of the system first, of course).  Depending on the laptop model, it may be relatively easy to blow off the dust with compressed air, or otherwise clean up things a bit.   Fans should be kept up well - only no right turn when being ripped off.  My Dell laptop has a removable fan (two small screws need to be removed) that can easily be blown.  This also allows access to the fins of the heatsink.

  Some laptops also have a removable filter that traps the dust and must be regularly inspected and cleaned.

  Are all the BIOS settings for the adjustment of the temperature, the value lower than the manufacturer's recommendations and the default values (you need to check the manual of your laptop for this).  Also make sure you run the latest version of BIOS (again, the manual of your laptop would have the details; the manufacturer's website should also have this information).

• After changing hardware, started back in windows my sound stopped working

  A week ago I tried to install Mac OS X on one of my hard drives added.  I used two different methods.  The first iBoot use and the second using Chameleon.  During this process, I moved my video card since the second PCIe slot to the first and exchanged my typical (8GBX2) 16 GB of ram for a 4 GB stick as it was necessary to make the hackintosh.  Long story short, I did not, and once I gave up my shenanigans and starts up in windows my sound is no longer used.  I checked and it showed that my speakers connected to the back were disconnected.  Plug the headphones into the front also will not work.  I googled everything and have tried convenience store windows, uninstall the driver and re installation, replacing my hardware configuration to the way it was, System Restore, reset of the bios, deactivation and activation of the integrated sound card.  I played with the settings of realtek and despite all efforts, nothing has worked.  The speakers work as I the plugged into my iPhone and played the same music if their fine.  However, the computer will play the sound through my video card to my TV via HDMI

  Computing: construction (self)
  Windows 7 ultimate 64 bit
  16 GB of ram
  i5-3450 3.10 GHz CPU
  ASUS v series p8z77
  GeForce GTX 560

  Hello

  It is a hardware problem. Somehow during the process of moving around of material you would probably hurt the sound card. I would contact the manufacturer of the sound card / computer for assistance.

• NewElementInHierarchy() - adding new items, gradually takes more time when adding several brothers and sisters

  With my script ESTK, users select the model numbers in the list and then the script inserts an element with a model number is entered in an attribute, an element for each selected model.

  When you add a large number of elements, each element of extra brother takes a little more then the previous item adds. Adding 250 items may take longer than 3-1/2 minutes or more. During the addition of 20, 50 or 75 items happens quickly, without any noticeable length. It is somewhere in the top 110, this is where that starts to get noticed.

  I even used $.hiresTimer and writes the value to the console for each time a model has been added. Because the timer is reset to zero (0) whenever it is called, it was easier to notice than the amount that it incremented from one element to the other got progressively bigger.

  Any ideas as to why it takes so long or reflections on what I could do to speed it up?

  The structure looks like this:

  < PartModels >
  Text < NoteText > < / NoteText >
  < model ModelNumber = "ABC01" / >
  < model ModelNumber = "ABC02" / >
  < model ModelNumber = "DEF03" / >
  < model ModelNumber = "DEF04" / >
  …
  …
  < model ModelNumber = 'XYZ01-A' / >
  < model ModelNumber = "XYZ * B" / >
  < model ModelNumber = "XYZ500" / >
  < / PartModels >

  The script is quite simple: scroll a selected model numbers table, add a new item for each model number and value of the attribute, the value of the model number. It's the short version:

  Function InsertModelElements (modelsToIns, insElemLoc, GVdoc) {}

  var newEleId;

  var newElemLoc = insElemLoc;

  var elemDef is GVdoc.GetNamedElementDef ("Model");.

  for (var i = 0; i < modelsToIns.length; i ++) { / / modelsToIns is the selected model range }

  newEleId = elemDef.NewElementInHierarchy (newElemLoc); //ElementLoc based on NoteText first, last, or absent

  SetAttribute (newEleId, "ModelNumber", null, modelsToIns [i]); //More feature robust to set the attribute
  

  / * Which also works for the layout attribute * /.

  var vattributes = newEleId.GetAttributes ();

  vattributes values [0] [0] = modelsToIns [i];

  newEleId.Attributes = vattributes;

  
  

  / * At one point, I tried to use a new location of the item to the last inserted element, no change * /.

  var newElemRange = setElementSelection (GV_doc, EleId); function that returns the range

  newElemLoc = newNewElemRange.end;

  }

  }

  Any help is appreciated.

  Sincerely,

  Trent

  Thanks Russ,

  I seriously considered trying to copy/paste and started to change the code to do it. But I could not let pass, the answer should be right there in front of me, it's all too long that I worked with this stuff, I am not able to see. Then it dawned on me what's happening.

  In a previous test, I put a timer on each action that is closed. For example, I start with a container element that has 200 children of elements, each with a specific/unique model number attribute. All the 200 existing items are deleted and then replaced with 250 new items with a different value for the attribute of model number. The timer was placed after the Element.Delete () and ElementDef.NewElementInHierarchy () methods. What I've noticed with the timer, it's that each deleted item has been removed as fast as the previous item (so it took progressively less and less time to remove an item). And of course the opposite was noted for insert items, each inserted item has taken longer than the previous inserted item.

  These elements can be inserted in two areas of the structure, one of the neighborhoods within format rules that affect the formatting and is actually a bit faster. This led me to the cause being ESD format rules. The area that takes more time has quite a few rules of extensible format that apply. Whenever an element is inserted or deleted, FrameMaker through these rules for formatting the content of elements. Given that the rules apply to the parent, first, last, next, previous, etc., FrameMaker must apply the rules of the format to all elements of the structure that the rules (which are extremely complex due to various elements, attribute values, and combinations that can be inserted).

  Removal or thinning of the FormatRules in ESD, she becomes faster. But each of the FormatRules are needed. So using app. ApplyFormatRules = false; just before that the elements are deleted and inserted works very well. But the key is to implement ApplyFormatRules return to true before remove the last element should be removed and before inserting the last element to be inserted, so it allows to scroll all the rules of format of ESD for all elements in the hierarchy of these format rules apply to. ApplyFormatRules true and assign the ElementDef until the last item works also [EleId.ElementDef = GV_doc. GetNamedElementDef (insElemType);], but only before all the other functions are performed or different items are added.

  doc. Reformat() will not reformat the content correctly after the fact, because the element has been created without the format rules, so it reformats all the contents of the elements without the format rules.

  The FDK version which was created 10 years ago had the same problem of slow operation when a large number of items have been inserted, but was still an improvement over having manually insert each item, and then type the value of the attribute, if she had lived with.

  He now works surprisingly fast. I hope that my explanation of what I think is happening, including the cause/solution, is understandable.

  Sincerely,

  Trent Schwartz

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• Satellite C55-B854 - right click takes more time

  My laptop Satellite C55-B854 takes more time in the right click. Here are few 8.1 window pro.32

  Hello

  Unfortunately, it is not easy to understand. What do you mean exactly with takes longer in a right-click?
  Your laptop is may be busy and when you click the right mouse button to open a menu it takes little time to seconds before it is displayed on the screen.

• Cannot use the calendar network unavailable or slow app. The application takes more time to load than expected.

  When you use iCloud on my iMac I get the message "network unavailable or slow. The application takes more time to load than expected. "This has been the case for several hours, but other applications I use (Mail, Contacts, Notes, reminders), all seem to work well.  The

  I have the same message when I try to load the reminders in iCloud. All other applications work correctly. This issue has been ongoing for about a month now.

  Have this problem on my work computer running Windows 7 SP1 Pro and Macbook Air late 2009 w / OS X 10.11

• My computer takes more time to put on than before. Why is this?

  Original title: slow system

  My computer takes more time to put on than before. Is this because too many files on my computer?

  Take a look in the system and Application logs in the errors and warnings event viewer and post here the copies. Do not post on that more than 48 hours ago.

  You can access event viewer by selecting Start, Control Panel, administrative tools, and Event Viewer. When searching for the meaning of the error, information about the event ID, Source and Description are important.

  A tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  You should be able to gather more information from the Task Manager. Open the process tab, select View, Select, columns and check the boxes before maximum memory usage and virtual memory size. What are the figures for the 6 process using larger quantities?

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before the error occurred initially do not use this option.

  If more than one person uses the computer and they have their own user log you need to run Disk Cleanup in each user profile that you want to delete all the unwanted files.

  A better program of disk cleanup is cCleaner but note that cCleaner will not manage system restore points. Remove the old restore points can be important if you have little free disk space. cCleaner comes with a registry tool. Do not use this tool as any registry cleaner could lead to the creation of very difficult to resolve system errors.

  http://www.CCleaner.com/download

  Hope this helps, Gerry Cornell

• TAKE THE TIME TO START

  WHEN I START MY COMPUTER LAPTOP IS TO TAKE THE TIME AND I HAVE MY WINDOWS VISTA HOME PREMIUM USING

  Click on the start menu, and then click Run.

  type msconfig. Click on Startup tab disable some applications you don't want to start at startup.

• Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success. Message is

  Win 7-64 not start after change of motherboard.   Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".

  If Win 7-64 don't update the hardware changes and this prevents the start.

  Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?

  Hello

  As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed

  Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  Note: data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Thank you

  Er.Mayank Chadha

  Thanks for your response

  I solved this problem in BIOS Advanced\SATA config\SB SATA config.  as follows

  SATA port 1-4 = AHCI initially

  SATA port 1-4 = new IDE

  SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4

  This because I've done a typical mistake of mine.   I did not save the configuration with the entry of FDI

  Good bye

  Huemul

• After changing Windows 8.1 for Windows 10 my photoshop 6 is not working properly: layers styles cannot be applied to the objects in the layer

  After changing Windows 8.1 for Windows 10 my photoshop 6 working properly: layer styles can be applied to the object in the layer.

  Thanks much for the reply, thank you very much more useful.

  The letter appears to be part of the layer - not an object separate pixelated. One thing you could do is make a layer duplicated, select the letter and make a layer of the mask. Then you could add a style to the copy, and the rest of the initial layer will be hidden.

• All of a sudden ODI should take more time than usual executions.

  Hello
  
  I put packages ODI scheduled for execution.
  Since a few days those who take more time to run.
  Before they used to take 1 hour and 30 minutes approx.
  Now they take 3-3 h 15 min approx.
  And there no any significant changes in the data in terms of quantity.
  
  My ODI s version
  
  Standalone Edition Version 11.1.1
  Build ODI_11.1.1.3.0_GENERIC_100623.1635
  
  ODI packages mainly use Oracle as a SOURCE and TARGET DB.
  
  What is - that I need to check to find out the reasons for the sudden increase at run time.
  
  Indications in this regard would be appreciated.
  
  Thank you
  Mahesh

  Mahesh,

  Some queries of the repository allows to retrieve the task of session timings and compare your slow performance to a previous acceptable run, then look the most important changes - it will highlight where you slow down, then its judgment to resolve the matter accordingly.

  See here for some example reports, you might need to tweak to your current version of rest, but I don't think that the table structures have changed that much:
  http://rnm1978.WordPress.com/2010/11/03/analysing-ODI-batch-performance/

• Generation of recovery media after changing Windows 8 for Windows 8.1

  How can I create new media recovery on the 8.1 of Windows after changing Windows 8? HP support says that only 1 set of recovery media is allowed. My original game is to Windows 8. You want to avoid having to go through the lengthy procedure of update in case I need to go through the process of recovery with my original support recovery.

  Hi @john_f_g ,

  Thank you for visiting the Forums HP's Support and welcome. I looked into your problem on your HP laptop and needing to make a new copy of Windows 8.1.

  Software recovery of HP and Microsoft allows you to make only a backup recovery.

  You can order new media disc or USB flash device of here.

  Thank you.

• update my Photoshop cc through my creative cloud and now takes more time to open the psb files that yesterday were beautiful, moving same layers autour, I now get the beachball! any suggestions?

  update my Photoshop cc through my creative cloud and now takes more time to open the psb files that yesterday were beautiful, moving same layers autour, I now get the beachball! any suggestions?

  Perhaps a preferences Reset could fix.  Cmd k will lead you to the Photoshop preferences where you will see this screen.

  

• Speakers stopped working after changing the device sound card

  * Original title: switched to hi-speed of dial-up, speakers stopped working / / rev. #2 Can I change the title of: speakers stopped working after changing the device sound card

  I have a Motorola SM56 speakerphone modem, I went from dial-up to the Road Runner.   When I open Device Manager and expand the sound column it lists "High definition Audio Device" (manufacturer of Microsoft), there are 4 that say "NVIDIA High Definition Audio" then there is one that says "Unimodem Half-Duplex Audio Device.  When I open the properties of the Unimodem device it says ' device working properly. "

  Let me start at the top under "General".  It lists the name of the device: Unimodem half-duplex Audio device.    Device type: audio, video and game controllers;    Manufacturer: Microsoft;    Location: Motorola SM56 Speakerphone modem.

  My speakers worked very well before I went.   I tried updating the driver but he came back with "best driver already installed.  It is a desktop PC, it is about 6 years old, but has been revised, graphics card new, updated to power, new 4 GB ram I think.  The hard drive is 1 TB.   I'm running Windows 7 Pro.  I forgot to mention, if I open a WMV file and volume in the taskbar commands, I see the green light moving.  The green light on the actual speakers turned on, just no sound.  It seems to me that the old speakers do not like the new modem from Time Warner. (I'm an old lady, what the devil I know)

  It is a question of another driver, or is it something else?

  Any help would be greatly appreciated.

  Are plug you the speakers into the modem?

  They must be connected in making your computer speaker, usually a light green color (read the manual of the machine). Go to control panel / sounds / playback and make sure that the type of speakers you selected as the default device.
  Audio device drivers updated its better to not use MS Update (it is not). Re-post giving your machine make name and exact model number (for example HP, Inspiron, ABC1234 etc.).
  See you soon,.
  Jerry