Take screenshot of a portion of the front panel

Hello

There is a table, a chart, and a text box on my front,

Can I save a photo (.) JPEG) façade complete with the attached code,

Anyway is taking just a certain part of the façade?

It would be nice if there is an example to learn.

Thank you very much!

You have image data.  You can turn that into a 2D array, you can take a subset of, assuming you know the pixels you want to keep.

Also, look at the code capture tool.  It installs a range of VI, you can use to make some screenshots.

Tags: NI Software

Similar Questions

  • Can I programmatically change the default property to create for all elements of the front panel?

    Can I programmatically change the default property to create for all elements of the front panel?

    I need to make the logout button, when click on, takes care of all the default values of my fron Panel.

    There is no way to programmatically call the functionality of an editor 'Use default' or 'Load Default'. To do it yourself, you will need to write your default values for each control explicitly in the diagram, when the user press the logout button.

  • How to add a record button on the front panel to save waveform data

    Hi, I'm new kind of LabVIEW and I worked on a code for an agilent oscilloscope communicate via GPIB and so far it works well on the collection of these two analog channels one by one, "Not UNLIMITED" but it does the trick (vpp, Vrms, frequency, etc.).  I've added the feature to add data to a .csv file waveform (problem: opens a dialog box until the user gathers all the data.) Solution: I want the user to save the. File CSV whenever he wants to use later on the front panel). I've added another feature to get a snapshot of the curve waveform (problem: opens a dialog box.) Solution: I want the user to save the JPEG file, whenever he wants to take a snapshot ("take snapshot" button on the front panel)).  I work with the agilent hp54645d driver. I have attached my code, if someone can tell me please how do I do this (maybe cabling and structures are solutions do not know). Thank you in advance.

    I would recommend adding a case structure just around the two record VI and a button to check the condition of the structure of each case. If you want a button to control both save functions you can put the two record functions in the same structure of business controlled by a single button. You are right in saying that the loop will cause your code runs until the stop button is pressed or until the stop condition is met. If you are wanting the while loop to stop once the recorded information you can use the button that you use to control structures case to also stop the while loop. I hope this information helps.

  • Hide / disable the front panel

    Long story, long:

    I created a little utility like a VI.  The utility accepts command-line arguments, reads a file, outputs (using .NET) on the console, and then must close.  The front panel is empty, and the program is expected to completed in a fraction of a second.  In fact, I bet that "demand" fresh General takes longer than the actual program.  I would have coded in another language, but I can read only the cluster in a binary file with LabVIEW.

    Environment:

    Windows XP, LabVIEW 8.2.1, .NET Framework 3.5

    Short story:

    How to prevent a LabVIEW program displaying the front panel and appear in the taskbar?

    There is also an option to simply close the front panel, try with 100% transparent option also

  • Error when changing the language of the front panel in Japanese

    Hello world...

    I'm changing the front panel of the English language to Japanese. To do this, first I exported the strings through the Tools->Advanced-> export channels.  After that I changed one of the label in Japanese and saved with Unicode encoding (as with normal ASCII coding Japanese texts will not be read). I imported the same file I recorded in a Unicode encoding format. But it shows that the error given below

    "Error analysis during the import of channels
    to test Main.vi
    of D:\Riyas\Work\X 520\28-11-15\X520 RT-Host 20151127\Strings\Test Main_Import 1. txt
    "Saturday, November 28, 2015 11:09:14.

    (See the attached screenshot of error)

    So I tried to import the same file ASCII coding mmee, then it is successful. But the problem is that the modified label is not in Japanese that it shows a few points mark. I'm able to import the channel file saved in ASCII format code but the channel with coding ASCII file will not read Japanese texts. So please help me to solve this problem.

    I need to import a channel file saved with a Unicode encoding or in any case format to enable Japanese texts as ASCII coded format.

    I modified the configuration settings to activate the Unicode format as follows "UseUnicode = TRUE'." I'm using Labview 2014.

    Thank you...

    racahmd wrote:

    My requirement is to change the language of the labels on the front. Is it possible to export the settings of the legend and label parameters separately? Currently, I am only able to export the two together. Also when I import the unicode file that does not contain unicode characters, it shows the same error.

    Perhaps the requirement is statesd as such because the people who wrote the requirement had no idea, you can keep the labels even but change the subtitles only.  Changing labels is a massive effort that could have profound ramifications to the code itself.  Not the same with a legend.

  • Is it possible to use a box Structure to hide digital indicators on the front panel, when they are not in use?

    I'm rather new to LabVIEW, only used for about 1.5 weeks from this post, it means that I may be missing something pretty obvious due to ignorance, but is it possible to make my front to change as my changes of breakage due to the selection of the user to a certain case via the front panel?

    The goal of the program is to make a simple layout for a user who uses the digital multimeter that the proposed code is designed for and I don't want tons of digital controllers and such clutter the screen that do not work with the function of the user uses to measure with.

    Thanks in advance.

    Yes.

    Two ways: 1. use a tab control.

    2. use of property nodes (Visible property).

    The tab control is a bit easier on the block diagram, but if some controls should appear in many cases it is difficult to do.  Property nodes take more space on the diagram but allows you the versatility to do almost everything you want.

    Read the help files and look at a few examples.

    Lynn

  • HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

    Hello

    I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

    could be - sleeve, ring and end cap (mono audio and microphone)

    or

    could be - sleeve, ring, ring and tip (stereo sound and microphone)

    Having read through the manuals and nothing is said on the type to use.

    Hello world

    Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

    Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

    Everything explained by the practice - but not the paperwork in the manuals.

    #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

    Thank you

    Son

  • WANT 411c: MFP ENVY 411c lights on the front panel

    I find anywhere a note detailing the two LEDs on the front panel of the printer.  Of course, the left is the power light and the Start button / stop.  The other, 1/2 "to the right, has an icon as the icon of WiFi or wireless, or whatever it may be as an antenna with a radiating signal left and right of it.  What is this for?  It seems that there is a hole below and to the right of the symbol, but nothing ever shows up.  I turned off the wireless and turn it back on and or State shows a light here.  I reinstalled the software checks to see if that mattered and it made no difference.  I also unplugged the router and the printer, and that has not changed anything. It is connected to my wireless network and works very well.  What this has to do with some additional services such as ePrint?  I just lost some of them September 1, 2016.  Perhaps the only light when something just one of them?

    Hello

    That your work as expected wireless connection, there no problem with the wireless printer, just with his lamp wireless card.

    The lamp to indicate the wireless connection is turned on and must turn on once connected wireless.

    They have nothing to do with ePrint or any Web service, it must turn on once connected to a local wireless network.

    As you mentioned that you are connected and the printer maintain a wireless connection, it's probably just a blown bulb.

  • Presentation of connector to the front panel DC7700

    Hello

    Cannot find the necessary schema in the database to support HP I hope someone on the forum can direct me to the table of connector on the front panel of the system (format minitour Convertible) DC7700 Board; It is available to the pins that tells me where to connect the various switches, LEDs etc on a new case.

    Any advice welcome.

    Peter

    FOUND IT!... in a previous post of the forum [see '' info DC 7700 Convertible Minitowers (CMT) motherboard?']  Among other things - who - shows that I had not scanned the tech Ref guide closley enough!  ;~[

    And thank you "mdscole" to highlight the trail.

    ;~) !!

  • e9180f: removal of the front panel? e9180f

    Hello, I need to clean my power swith (on the upper edge of the front panel) due to a spill of food products.  I have a side removed by removing a screw in the back and then dragging to the rear of the side panel. I don't remember if I already had the cabinet apart one more than this. The front panel can break, but I fear I will "break the BAD thing. I'm sure that WD - 40 or other cleaner used by switch electronic only should be OK. Thank you all for help.

    Please see HP document "remove the front cover HP Pavilion elite e9000, HPE-100 series desktop computers" for instructions on removal and replacement of the cover.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Satellite A200-1N1: "Satellite" LED on the front panel does not light up

    Hi people!

    I noticed that my LED with the word "Satellite" on the front panel lights.

    You have all the hypotheses on the causes?

    Hi Maresha,

    The front 'logo' LED is enabled or disabled using a BIOS "Display front Logo" option that can be set on IT or OFF you need. Access your BIOS settings (F2 at startup) and check that this setting is set to 'ON '.

    Kind regards

  • The front panel ThinkCentre M81 connector pinout

    I have a ThinkCentre M81. I am currently trying to put the guts of it in another case, so that I can add some more to it. I checked all the guides I can find on Lenovo's Support site and they show only the location of the connector and how repalce the façade.

    I try to connect the connections for the front panel ATX standard for my motherboard M81, which I'm having trouble with, reason for the connector of the Panel before Lenovo comes to be a big connector.

    I wonder if this information is a resource that I missed somewhere, or if I have to trace the wires.

    It is not your model, but maybe they are similar:

    http://forums.Lenovo.com/T5/ThinkCentre-A-E-M-S-series/ThinkCentre-A60-front-panels-power-audio-and-...

  • How to scroll through the front panel when running

    Hello

    I'm using LabVIEW 8.5. I want to scroll the front panel automatically according to the moving object. I enclose a vi for example, in which I move the image, but if it is out of range of screen I have to scroll manually horizontal scroll bar to see the position of the image, it is possible that it automatically scrolls according to my position of the object.

    -Thanks in advance

    Hi, Mary,

    Well, now I see what you wanted. From my point of view using front panel scrolling for this animation is wrong way (if not I do not know your final objectives).

    I would recommend that you use the image for this control. Here the work by hand a little more, but you will get better results and will not scroll to your façade.

    For example, "quick and dirty" implemented:

    Andrey.

  • A way to group controls and indicators on the Front Panel and that they can be made Visible or not as a group?

    I would like to combine several orders and LEDs on the front panel in a group in a way that allows me to do the whole group Visible or not.

    I tried to use a Cluster, but it has a side effect that all elements must be inside the controls or indicators, but not mixed.

    Is there any graphic element, like a panel that can contain other controls and indicators on the inside and make them Visible or not as a group regardless of whether they are commands or the LEDs?

    Good suggestions on how to do this?

    Thank you.

    The tab control is still not my favorite, appearance but it's a way fast and effective to show and hide groups of controls and indicators.

  • How to make non-visible control on the Front Panel appear at Design time?

    I have a few controls on the front whose visibility is changed (on or off) at run time. The problem is that if I stop the Run time, the visibility of the control remains in the running in design mode state. So I am not able to see or find the control to make changes in design mode.

    How can I make all the visible front-panel controls, or find and make it visible to a control on the front whose visibility has False?

    Thank you.

    It is documented in the help of LabVIEW.

    Hidden front panel display


    Perform the following steps to display a hidden front control or indicator. You can also hide the indicators and controls on the front panel.

    1. Find the terminal block schema for the object. "If you have multiple devices with the same type of data, right click on the terminals and select visible elements" Label in the context menu. Find the object with the label that corresponds to the object hidden façade.

    2. Right-click in the Terminal, and then select Show Control context menu if the object is a control or indicator to show if the object is an indicator.

    You can also use the Visible property to display the controls and indicators by program.

    You can also view all hidden front panel controls and indicators.

    Path: Fundamentals-> build the façade-> how-to--> configure the objects-> display on front panel of the façade hidden object.

Maybe you are looking for

  • Dial-up servers Imap, thunderbird deleted my Inbox making - can I recover these e-mails?

    We went from hosting providers and it has also changed our IMAP servers. I've updated my account to reflect the new information of IMAP and he took my entire inbox. Out of curiosity I searched for my old emails and they come in the search function bu

  • button to send later

    Recently switched to Thunderbird of Pmail as I am now running Linux Mint 17 instead of windows. Thunderbird is generally excellent, but surprisingly odd in some important respects. And a this is I just spent an hour trying to understand your FAQ and

  • My C50-A-1DV Satellite will not work without power

    Hello I have a new Satellite C50 A 1 DV.It doesn't work unless it is plugged. Anyone know if that is correct?It seems odd. Also the far left in the front (AC IN) never turns on.Is it OK? I would be grateful if someone could put my mind at rest! Thank

  • webarchive open transferred files of SnowLion

    Web archives, I've created with Text Edit on 10.7.5 MacBook Pro trigger a warning the first time, I try to open them on my new MacBook Pro Yosemite. I have replace the safety for each message by clicking the control, but I can change the security set

  • Random Sinwave. Removal of Spike

    I'm trying to remove the first impulse. Is it possible to remove this impulse? If so what icons would I use to remove the pulse. Well I compression?