takes 10 days to get the CD disk to try 2times a day, why?

Similar Questions

• my system got infected and had to be recovered, but the recovery fails... How can I get the recovery disks?

  my system got infected and had to be recovered, but the recovery fails... How can I get the recovery disks?

  Hello

  Please follow instructions on the link below to see if the recovery discs are available for your laptop:

  http://support.HP.com/us-en/document/c00810334

  Paul

• I get the following when you try to run programs such as Nero "this program requires the file AdvrCntr6.dll, which is not on this system."

  I get the following when you try to run programs such as Nero:-"this program requires the file AdvrCntr6.dll, which is not on this system."

  Please can you help me?

  Original title: AdvrCntr6.dll

  Hello.

  There is a guide for fixing here:

  http://pcsupport.about.com/od/findbyerrormessage/a/advrcntr6-DLL-not-found-missing-error.htm

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• I can't get the watermark disappears when I by a picture, why?

  I can't get the watermark disappears when I by a picture, why?

  Please refer to I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• How do I get the installation disk full Windows

  My laptop has become very unstable due to 2 anti-virus installed - my expired version wouldn't uninstall and finally my laptop wouldn't start.  I managed to do a repair of windows on a startup disc but a lot of files windows can be fixed when using chkdisc.

  I don't have a windows installation disk when I bought my Acer laptop and I would like to get a copy to do a clean reinstall, please let know us how I can do this.
  Windows Vista Home Premium for my Acer 5535 is an authentic product.

  Thank you very much

  Hello

  Microsoft does not disks for computers manufactured OEM.

  This is for Acer to do, if they still have any available.

  As you never have a disc, you must have a recovery Partition to reinstall the operating system.

  "How do I restore my computer using the eRecovery Management program outside of Windows?

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  If it does not and Acer cannot help you, read on:

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• try to get the Boot Disk Defragmenter.

  I begin of choice of tools system Disc Defrag regularly or to administer mode get User Account Control nothings happens.  I tried my right click computer properties, tools, defragment and once again nothing. Family Vista premium, all updates are current and all drivers are up to date. There is a new recall defrag was working fine before the update of windows. Updated driver occurred after problems to start defragmentation.

  Windows disk defragmentation must be performed by calendar. You shouldn't have to run it manually, not to mention that it takes forever to complete if you run manually.
  Once fixed, the Windows Disk Defragmenter is designed to run silently in full. You won't see her progress.
  Here is a tutorial to show how your disk defrag schedule.
  http://www.howtogeek.com/HOWTO/Windows-Vista/configure-disk-defragmenter-schedule-in-Windows-Vista/

  If you're dead set to run manually and monitor progress, I recommend Augslogics.
  It allows you to decide which drive to defragment.
  It shows you the process, "play by play".
  It gives you a summary report.
  Augslogics link:
  http://download.CNET.com/Auslogics-Disk-Defrag/3000-2094_4-10567503.html For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• How to get the maximum disk size for a powershell prompt

  Hi guys

  I tried all day to get the value of the maximum disk size allocated to a virtual machine. Using get - view I can see the actual size of disc but when I look at VM via 'Edit Machine' I see ' hard disk 1' ability to 40 GB and and size maximum (GB) to 97.5 - How do I get this maximum size via powershell?

  See you soon

  Sparky

  Near there, it is actually the amount of free space on the data store over the current size of the hard drive.

  With this script, you can calculate the value

  foreach($dev in (Get-VM  | Get-View).Config.Hardware.Device){
    if($dev.DeviceInfo.Label -like "Hard Disk*"){
      $dsFree = (Get-Datastore (Get-View -Id $dev.Backing.Datastore).Info.Name).FreeSpaceMB
       $diskSize = ($dev.CapacityInKB / 1Kb)
       $MaxSize = $dsFree + $diskSize
       Write-Host "Maximum size for" $dev.DeviceInfo.Label "=" ("{0:f2}" -f (($dsFree + $disksize)/ 1Kb)) "Gb"
    }
  }
  

• Portege A100: where can I get the recovery disk?

  Anyone know where I can get the recovery for my portege a100 disc as my one was lost in a recent move of House as well as all my other software.
  any help would be received with gratitude

  Hello

  You can order the Toshiba recovery disks in the Toshiba authorized service partner in your country.
  Before posting questions, you should use the advanced search for similar topics. This similar issue was published a long time here in the forum

  Cordially ;)

• Re: Satellite M100-164 - how to get the recovery disk?

  Hi, I have a used Satellite M100-164. (short only model no psma0e)

  Its a M100 changed for the Middle East market as well far as I can tell its basically the same as the European models of M100, except with a smaller hard drive.

  I bought it in a store of play (Computer Exchange in London), but it did not come with a recovery disk.

  Also, I was a little too active pro removing unwanted software of the machine, so I have not installed the Toshiba tools that would be able to create a recovery disk.

  Now I need one because I want to install a bigger hard drive and then re - build the operating system (which is XP)

  * So my question is, where and how do I get a recovery for this notebook drive? *

  I tried to use https://backupmedia.toshiba.eu, but it did not work because the serial number was not recognized (probably because it is a region of the Middle East series no)

  is there another way to get the Toshiba recovery disks? I'm happy to pay a little for one.

  Hello

  In most cases it is possible to get the EPA recovery disc in your country.
  But this is not always possible if the laptop model is too old or abandoned.

  Therefore, get in touch with the ASP guy and ask for more details.
  Maybe you are a lucky man and could get this disc.

  If you will not get this disc, you will need to install the OS by using the MS XP disk.
  Pilots must be placed on the page of Toshiba Europe!

  See you soon

• Satellite A100 PSAA8C - how to get the recovery disk

  I got Toshiba Satellite A100 PSAA8C - SK800C NOTEBOOK. I had lost the product Recovery DVD-ROM of this model. I had smoker
  Save the product recovery dvd. Can U tell me how I should get the product Recovery DVD - ROM with XP Service pack 2 operating system.

  Hello

  I m not very good if you want to be able to order the recovery for this unit disc, because in very rare cases, the recovery disc may be pronounced if the laptop model is too old.

  So I hope that you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

  You can also try to contact the ASP in your country and ask the guy if he could order the Toshiba disk directly

• How to restore the Satellite L25 - where to get the recovery disk

  Hello..

  I tried to format my hard drive on my laptop L25, which currently has Win XP, but don't know that if I ever had a CD/DVD of recovery of the person I bought it from.

  Does anyone know if this laptop (L25-s1192) contains a picture of the recovery diskette or if I can get a drive recovery somewhere or any other way to format the drive and reinstall the original content of the laptop?

  Would appreciate if you could answer.
  Thank you... Amare

  Hello

  Usually, the old series from Toshiba was equipped with the recovery disk and the image of Toshiba on the recovery cd.
  If you have a recovery disc, then you will have to boot from that disk to start the recovery procedure.

  If you don t have a recovery disk, then you can use a clean Microsoft Windows XP CD to reinstall the operating system and the necessary drivers can be downloaded from the Toshiba driver page we.
  It is a portable American and you need to find US page for drivers.

  Big names

• I did an upgrade from Vista to Windows 7 and when I trired to reboot, I get the check disk error

  I did an upgrade from Vista to Windows 7 and when I trired to reboot, I get the following message and there's like this. I tried to cancel the disk check with in 10 seconds by pressing a key, but it still is not.
  Message:
  "Checking file system on C:.
  The type of the file system is NTFS.
  One of your disks needs to be checked for consistency. You can cancel the disk check, but it is highly cool that you continue.
  To check the disk a press any in 10 second (s). »

  How your problem is related to Windows Update (compared to the Windows upgrade)?

  This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Where to get the recovery disks?

  So I kinda messed up...

  I wanted to see if a clean install would be better than the standard configuration on my E420s. I thought I could do a factory reset of the disc "Lenovo_Recovery." But it seems that I should have burned the recovery discs until I formatted my E420s.

  I don't quite know what to do now. Can I get the Lenovo recovery discs? Or in the store where I bought my laptop?

  Never mind. Thanks for the help Maliha

  I called Lenovo and I am very impressed with their support. They were very friendly and they send me FREE recovery disks. Awesome

• He cannot get the installation disk to work.

  I insert the boot disk, the drive starts and then goes to the menu. I click the configuration option, the menu disappears and nothing happens. I've tried the drive on 2 different computers with the same results. The two laptops are Sony Viao, windows vista and are currently running wireless now. What I am doing wrong? What can I do? I called customer support without a lot of help. (reference # 090807-015012)

  Thanks for any help,

  Jim

  Finally got the disc to work. I had to use a computer with windows XP! Everything seems to work OK now.

  This site doesn't seem to work with Mozzila today, had to use the Opera browser. Thanks for the reply. Usually, I will work with these things (routers & all the rest) until I get to work or break it. - Jim