taking too much memory, even if I deleted the email account

Similar Questions

• How to import old emails having accidentally deleted the email account?

  I have deleted my thunderbird e-mail account and now cannot access the mails I received. I'm trying to find them on the computer and import them, but don't know how to do. I use thunderbird on windows 8.1. Any help is appreciated!

  If you have deleted the email account, then it is expected that you wouldn't see emails. So there is nothing wrong with this part.

  It is possible to recover a deleted account.

  If you have an IMAP email account you simply re-create the IMAP account as e-mail messages are stored on the server and IMAP e-mail accounts have a remote view directories on the server.

  If you had a Pop e-mail account, e-mail messages are download from the server Inbox for the email account Thunderbird Inbox. By default, they download, and then delete the copy on the server. So now the only copy in your computer. You can set it up so that emails are not deleted from the server. Tools > account settings > server settings for pop mail account Select "Leave messages on the server" click OK

  Note: If you have an account and you want to remove it, but you always want to see e-mail messages, you need to move e-mails in local folders first and then delete the account.

  How to recover a deleted email account.

  • http://KB.mozillazine.org/Recovering_deleted_mail_accounts

  This link tells you how to recover the account. But I described the process below.

  First check emails exist make hidden folders and files visible:

  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  In Thunderbird
  Help > troubleshooting information
  Click on the view file"" button.

  A new window opens to display the your profile folder.
  Click on "Mail".
  Click on the name of pop e-mail account (if it does not exist, then they are gone).
  Note its name and where it is located. In general: C:\Users\UserName\AppData\Roaming\Thunderbird\Profiles\profile name\Mail\pop mail account name of the folder.

  This will show you all the folders listed as "files", they don't have any extension. Thus, for example: you will see the Inbox (email containing) and Inbox.msf (indexing file - no email).

  You can open the Inbox folder using Notepad to see the emails.

  Assuming that the account and emails are still there: close the window.

  In Thunderbird: Create a new pop e-mail account by using the same parameters as the one you deleted.
  File > new > account mail Exisitng

  Now to the point the mail account created to use the e-mail account deleted.
  Tools > account settings > server to the newly created pop e-mail account settings.
  lower-right look for "local directory".
  Click on the button "Browse".
  Locate your original pop email account and click Open
  In general it is located here:
  C:\Users\UserName\AppData\Roaming\Thunderbird\Profiles\profile folder name\Mail\pop mail account name.

  Click OK

• Pack Microsoft Jigsaw taking too much memory

  I installed the game Jigsaw Microsoft and downloaded a few packages of puzzle. Now it takes too much memory on my tablet.  What I was wondering was if I moved the puzzle of the modules to an external device (USB) so I would be able to move them from the tablet.  I lose my statistical information (time) for these packages?

  Thanks for any help.

  Hello

  Sorry for the late reply.

  Because the issue that you are experiencing is specific to the game, so I suggest you to contact support Microsoft Jigsaw.

  Please see the link below:

  http://support.Xbox.com/en-us/Xbox-on-other-devices/Windows-games/Microsoft-jigsaw-Info

  Hope this helps, let us know if you need more assistance.

• Svchost is taking too much memory, help please?

  My computer started lagging randomly the other day and I checked the Task Manager processes and saw svchost was using almost 600 k of memory and about 40% of the CPU. I right click the svchost and went to services and seen it as things netsvcs the svchost related.

  I didn't know what to do and could not find a way to solve this problem, so I decided that I would just restore my computer with my CD of Windows 7 Ultimate. The reinstallation of Windows 7 (formatted my HD), it would allow me to make updates. I kept getting errors (8007001F I think is most often, I got) I searched and searched on the error I received, but could not find anything useful. So I ignored just updated. Now the svchost is take a lot of memory. Mind you, until I reinstalled Windows 7, my computer has been updated and the svchost was taking a lot of memory. Here are the screenshots.

  Also, I try to put an end to the process, but it results in a blue screen and restart sometimes.

  http://www.Tinypic.com/r/20saf51/6

  http://www.Tinypic.com/r/31488kg/6

  I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

  For more information about Process Explorer, see here:

  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  When you open the process Explorer, you need customize settings. This by checking the options on the view menu drop-down. Click Select columns, and then the process Image tab check all the boxes before description, Image, Image Type and command line path. I suggest that you click also on two other options in the drop-down display, namely show processes from all users and display fractions CPU.

  The extent to which you can customize is considerable. You can change the information displayed and this sometimes leads to confusion and frustration.

  Processes are listed in the left column. Some names appear to be duplicated. This isn't so. Svchost.exe is an apparent example of duplication. You generally listed something like 10 cases. If you right-click one and select properties and the Image tab you will find that the command line is different for each instance of svchost.exe. Each instance of svchost.exe is another group of services. You can see a list of these Services if you click on the Services tab.

• BlackBerry 10 cannot delete the email account (unauthenticated) / cannot authenticate the email account with different servers SMTP and IMAP (a gmail)

  After updating the OS on my last night in 10.1.0.4181 Z10 (software) / 4633 (OS), all my accounts set up asked for credentials must be verified. Looks like now that it uses some sort of mechanism of OAuth - worked well for my Gmail accounts with two-factor auth.

  One of my accounts that I have Gmail as IMAP server (using a regular gmail.com account), but another SMTP server, with the address on a different domain. I use Gmail as my email client, basically.

  After the upgrade, I am prompted to authenticate, but at some point, someone on my domain set up Google Apps. Has never been for nothing. I wonder to enter * that * password via Google. I don't, and this is NOT the account that I'm trying to connect. (I want a server with user name [email protected] gmail.com IMAP and SMTP [email protected]).

  So I'm stuck... can not authenticate.

  Even worse: Also, I can not delete the account! Delete option is not available until after you have again authenticated. Because I can not delete the account, I can't try to add it again separately - I get an error indicating that the account is already configured.

  All options except wait for the next update of OS or do a wipe/restore?

  (Wipe/restore is really not an option for me, it takes several hours, and the last time I was forced to restore, I lost a good amount of data that I then had to enter manually in restoring to my old 9790 and then it tapping on my Z10.) Not to take this risk again).

  Try this:

  Open an e-mail account with the same account information and email address, but as a pop account to synchronize the account. Both accounts now appear in a new sub-account. Now you can remove the two accounts together. It worked for me...

• The operating system that is taking too much memory.

  Hello

  I use windows 8 in my laptop for a year. Now, I noticed that the OS takes too (about 40 GB) of memory in the installed drive (drive C). I cleaned the disk using Disk Clean up. But not seen so much difference. What should I do to minimize the use of memory by operating system? Is there something to delete is not in use, but consumes memory. Another thing.  It is the performance of my PC.

  Thank you

  Abhijit salvation,

  Thank you for the update.

  As a general rule, Windows 8 Configuration required (x 64) 64-bit requires about 20 GB of disk space and the configuration of the system requirements Windows 8 32-bit (x 86 / x 32) can take up to 16 GB of hard drive space.

  If in your case, if it takes about 14 GB, this is quite normal. I would refer you to the following suggestions can help you to empty the little space.

  Tips to free up disk space on your PC

  I hope this helps.

• temporary files take up too much memory

  a temporary file in local contexts / profile system / config / system 32 take too much memory

  a temporary file in local contexts / profile system / config / system 32 take too much memory

  Can you be more specific?  Is there a question here?

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

• My Safari is using too much memory

  I use Safari 9.1.1 on my iMac (OS X 10.9.5)...) Last week, Safari uses too much memory causing my computer to slow down and own memory has automatically free up space.  I use the same sites in multiple windows.  But it will bring my RAM available to a dangerous level of 2 MB...

  Memory will make things worse. The amount of RAM is installed?

• Firefox using too much memory

  Hello

  I had this problem a weakness there, I made any suggestion that this link said and it did not help:

  https://support.mozilla.org/ar/kb/firefox-uses-too-much-memory-ram#w_disabling-memory-consuming-plugins
  

  I have no many taps oppened taps only 47.
  My firefox now usiing 2 GB ram, can someone help me how to fix it?
  Thank you

  I tried 'back of ram' add and activate acceleration on my GPU and it worked, it did not use more than 200 MB with the same number of notches before

  Thank you very much

• AVG says using too much memory because multiple firefox is open, but I only see one.

  AVG regularly analyzes in the background. Lately he has demonstrated a popup window that says multiple applications of Firefox are running and using too much memory, so I should close some. But I can only see 1. Tried CTRL ALT DEL to see if I could find the answer, but only showed 1 firefox, and that he used more than 28 000. So I think that AVG is correct, but does not know how to see what who or where they are. They DO NOT display in the lower menu on the main screen, so I guess they are in the background. Do not have the virus, and Firefox, regularly updates itself. What should I do to fix?

  Hi cmich80220.
  It is true, that you should only be able to run only one instance of Firefox at the same time. I searched but could not find someone else with a similar problem. If the problem comes back to Firefox running slowly, you can consult this article for troubleshooting:

  [Firefox is slow]]

  Hope that helps.

• Satellite 4030 has much too much memory embedded - 66 MB not 64 MB

  Hi all

  I have a 2nd Satellite 4030 user who has far too much memory shipped! [66 MB not 64 mb]
  The maximum allowed to my machine is Total = 312 mb.

  I added a 256 MB stick in slot 1 memory to the supposed 64 MB on board & it does not start.
  I put back the original 128 MB & started stick & apparently, I have 66 MB of RAM?

  Adding to this 66 MB 256 = 314 MB! 2Mbmb more than max allowed.
  I tried 2 different sticks of 256 of ram to my other laptop Toshiba & still no boot [prove it is the amount of ram?]

  Am or work around for this I stuck running on only 192 MB?

  Help K Morton

  Hello Morton

  This is a very stupid situation. That I can see, nobody has written anything in the last 3 days and to be honest, it is not easy to say why this happens.

  I don't really have experience with these cases, but maybe you can try to update BIOS. Check Toshiba support page and try to update BIOS. Maybe BIOS values will be refreshed, and after that the memory will be displayed as it should be.

• Explorer.exe and svchost.exe using too much memory

  I have disabled the automatic updates after the last round of updates, and now, all of a sudden, explorer.exe and svchost.exe use too much memory... enough to interfere with other programs, I try to use.

  Help?

  Windows XP Professional - Svc Pack 3 processor: Intel (r) Pentium (r) D CPU 2.80GHz CPU speed: 2.73 GHz memory: 512 MB

  Why you turn off automatic updates?

  There are between the two options. I just set it to notify. When it is practical, I go to the Microsoft Update slte and use the custom (not Express) option. This gives the user full control of the update of trial.

  You will have a better idea of the cause of the problem using Process Explorer.

  Download Process Explorer.
  For more information about Process Explorer, see here:
  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  With svchost.exe provide us a list of services using the process. There are number of processes that are using svchost.exe, so we need to know that we provide more targeted assistance. Right click on the process, click on properties and look at the Services tab.

  Solution Explorer. exe has a number of subprocesses. Select the sub-process, click Properties and check the Services tab.

  Have you recently changed all types of starting any service. This often leads to the problem. Users often disable a reflection of service to speed up the system performance. In practice what is done is of one or several programs to malfunction.

  Hope this helps, Gerry Cornell

  Hello

  I inadvertly solves the problem by changing my default from iTunes media player to Media Player.

  Hope this helps someone else!

  Thanks for the link to Process Explorer :)

  Windows XP Professional - Svc Pack 3 processor: Intel (r) Pentium (r) D CPU 2.80GHz CPU speed: 2.73 GHz memory: 512 MB

• Requires too much memory to rasterize in AE 2015 Cloud

  I do exercises of Lynda.com and must the called 01_07Intro_3D.eap one

  said: After Effects error: "Outer Circle/SZ_Circle_Outlines_Ae.ai requires too much memory to rasterize correctly. (50::15)

  looked up: requires too much memory to rasterized

  and I tried the fix frame 5. It did NOT work. And I'm under AE 2015 Cloud

  Have only 2.93 Ghz Quad Core Intel Xenon with 8GB ram (maximum) with the NVIDIA GeForce GT 512 MB graphics card.

  Any Suggestions?

  According to the link you as much as it seems back back for 2014 fixed the issue for this user (who had 16gigs of RAM) then you should try to return to 2014

  How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team.

  Apart from that... it could also be a problem with this file itself "Outer Circle/SZ_Circle_Outlines_Ae.ai" because it's the same exact file which gave the error to the other guy.

• My Flash project contains too much memory.

  I am creating a Flash photo album and left many pictures in my work. However, my project has recently stopped working in Flash Player and either crashes or causes an error message indicating that too much memory is in use. I need all these pictures in my photo album, so removal of some is out of the question. Is there any other way to fix my project?

  Yes, not to put one of the photos in the photo album manually.  Have them all loaded dynamically. You will not have to leave one of them and update the album will not require editing, just change the data file, you use that identifies the images and add images to the collection.

• Printer does not print after canceling a print job even if I deleted the queue and stop the printer and the computer.

  Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows