Tandberg Edge 95

Hi, can someone please help?  I have a Tandberg Edge 95 I have connected 2 monitors for... The primary monitor is connected to the DVi Out o th at the back of the unit.  The secondary monitor is connected to the Composite video output (1.Dual) to the device.  When I want to send (my PC) content at the end as a presentation, I can also see it on my main screen, but I want to see the camera from the other end on the secondary display. Currently, I can only see the PC or the local camera on the secondary display.  I tried a combination of parameters, but can not get the camera from the end to display on the secondary monitor while I have the content of the PC on the main screen.  I also tried the output S - VIDEO and Composite video output (2.Single) without success.  Can someone tell me please how to operate?

We have a number of Edge95MXP using two screens and controlled - AMX works well.

However, all the programming is done for us by people you really know their AMX programming and Cisco/TANDBERG products - that helps.

Jens

Tags: Cisco Support

Similar Questions

  • Tandberg Edge 95 MXP Password reset via the remote control

    Hello

    I try to reset the IP password via the remote control and still get the complaint that the password must be at least 8 characters and the number. I tried all combinaiton of 8 characters and 1 number, 8 characters and 2 numbers, 6 tanks and 2 numbers, 4 characters and 4 numbers, number 8 characters and 1 number 1 and so on. Is there something special about looking for the system?

    Thanks for the support!

    PS. When I telnet into the system, it shows TANDBERG Codec Release F7.2 PAL / SW Release Date: 2008-10-31, so I guess it is 7.2.

    Do you know if strict password is enabled or not?

    By default, that is, unless you have turned it off at some point, which will ask for a password at least 15 characters that contains 2 lowercase letters, 2 caps, 2 numbers and 2 special characters.  You can check by connecting to the endpoint using SSH or Telnet and runs the API command below:

    xConfiguration StrictPassword
    Here are the steps to reset the password to access IP on a TANDBERG MXP endpoint, I suggest that you try to use the API to change the password by logging on to the endpoint by Telnet or SSH instead of the remote control. The most recent software MXP is F9.3.4, suggest you also improve your point of termination to the latest version to mitigate the security issues with the older software. You can contact TAC and advisory security cisco-sa-20140605-openssl to get a key to unlock so you can upgrade your MXP to software F9 of reference, from there, you can upgrade to F9.3.4.
  • TANDBERG Edge 95 MXP component

    Hi all

    I will propose the 95 MXP to a new customer and I want if this component's default purshased with equipment:

    "Monitor for HD camera stand.

    Thanks in advance

    Best regards

    CHAM

    Looking at this - http://www.cisco.com/en/US/prod/collateral/ps7060/ps11304/ps11313/ps11382/end_of_life_notice_c51-720894.html - it might be worthwhile to consider the SX20 rather

  • The MXP 95 edge Firmware update

    Recently, I came in an operation using a Tandberg Edge 95 legacy. The firmware of the device, from what I can tell has never been updated. It is currently running F6.0. I downloaded the F9.0.2 package but I am not familiar with this procedure. Can someone help or direct me to a site of insturctional on the updating of this device?

    upgrade is covered in this document - page 141

    http://www.Cisco.com/en/us/docs/Telepresence/endpoint/MXP-series/F9/administration_guide/mxp_series_administrator_guide_f90_excl-full-menu-structure.PDF

    You also need a release F9 key.

  • Of packet losses causing ISDN link

    Hi all

    I have a little more trouble with the ISDN link. Everything works perfectly now, I can make calls to 384 k ISDN.

    The problem now is that packet losses arises (not much,<1% total)="" when="" connected="" through="" the="" link="" into="" a="" lan.="" to="" clarify,="" the="" sx20="" needs="" to="" function="" over="" both="" isdn="" and="" ip="" (it's="" replaced="" an="" old="" tandberg="" edge).="" in="" lan="" calls,="" if="" i="" bypass="" the="" link="" completely="" and="" plug="" straight="" into="" the="" wall="" tap,="" the="" packet="" loss="" is="" at="" 0.0%.="" put="" it="" back="" in,="" packet="" loss="" is="" back="" up="" again.="" this="" is="" without="" changing="" any="" settings="" on="" either="">

    Any ideas what could be causing this? I'm just trying to use the ISDN link in which it is never intended?

    You do no way, it was not designed to be is supposed to work this way, allowing you to make IP or ISDN calls.  We have ours up and running in this way and it works well.

    One thing to check would be the network cables that you are using - good markets and bad cables can often cause problems when using a quality cable can solve the problem.

    Check your switch configuration to make sure that you are not forcing a setting the speed/duplex, which then is not being properly negotiated by the equipment then plug (or make sure that force you the settings the entire path if you need to do).

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate.

  • Questions of signals (s7 edge LTE - iPhone 7 Plus 4 G/E)

    Hey guys,.

    I know there are a lot of posts on this topic but I can't really find the one that corresponds to this...

    So I moved from s7 Edge for iPhone 7 more.  Since the switch, I have signal problems. Where, normally, I LTE 3 bars on my edge of s7, I now get 4g and E even on my iPhone 7 more. What is going on!!!  BTW, I'm on T-Mobile.

    Thank you

    Hey Greggaa,

    Thank you for being a part of the communities of Apple Support.

    If you get a poor cellular signal where you used to get full LTE signal, then it might be an update available for your iPhone carrier.  Please follow the steps in the article to check this update:

    Update the settings of your company on your iPhone or iPad

    Take care.

  • iPhone 7 screen purge / uneven edge of the screen

    I noticed on a background of intermediate color as the backlight on my 32 GB iPhone Black 7 is uneven on the right side of the screen and I see dark spots 7 or 8, almost like a series of rectangles will light dark light dark. You don't see them on a white background or against black, but only against colors flat (a gray screen at 50% for example).

    ITI is particularly notable, if I pull the low notification Center or go to multitasking where the wallpaper becomes a pale blur.

    I tried to capture on camera as best as I can as shown on the attached photo (ignore the white line of thinking above).

    I don't know what is my best option, because stocks appear to be low, so I can't even order a new and send that back as the day 14 return policy runs out next Friday and another would not happen for 2-3 weeks. I can't imagine having enough stock to swap Apple stores either.

    I was wondering what think and what would be the best course of action.

    Given that I can't edit my original post, I would also like to add:

    These are dark spots certainly that the screen is uniformly bright above and below the area as apposed to bright spots that you wait with purge of 'normal' screen).

    Scroll the app facebook for example, you notice that it is when an image that goes to the edge of the screen and you saw a difference subtle when the image scrolls clear/dark areas.

  • can I scroll the pages via gesture control. At the present time to scroll, I use the pointer over the edge Strip!

    I would like to be able to scroll using the gesture control. I think I've been using sound, but it now seems to be not not available.
    Scrolling by pointing at the helm of the edge is a pain!

    Gestures are a feature of your operating system. Check your operating system settings.

    TB - 38, 3 Win10-PC

  • Firefox will not connect to YAHOO, edge and chrome will be

    I get the message expires by connecting to Yahoo using firefox, occasionally I get a yellow screen.

    Chrome and edge appear to work normally.
    

    You can try the following steps in case of problems with web pages:

    You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

    • Hold down the SHIFT key and click the Reload button
    • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
    • Press 'Command + shift + R' (Mac)

    Clear the cache and delete cookies only from Web sites that cause problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • Thunderbird runs on a PC without the need to have e Firefox browser and if yes, it works on Chrome, and IE/Edge?

    I plan to download Thunderbird but I don't want to have to download Firefox as default browser, I mainly use Chrome, but I also need to know if I download this, it will work also on Internet Explorer as well as Edge. Thank you!!

    Hello

    The Mozilla Thunderbird e-mail package is a stand-alone email client that requires no Firefox to use. You should be able to use for the management of emails to the sides of Chrome, Internet Explorer, or one of the many browsers that are out there.

    I hope that this helps, but if not please come back here and we can look in the alternative for you,

  • Google on Firefox gets my incorrect location (Chrome and Edge are fine)

    Since the upgrade to Windows 10, I had some localization issues when using Firefox. When I search something in Google, I get only US results (we are located in the Canada). However, Chrome and Edge both show good Canadian results. I checked the location of my IP address and it shows Toronto (as it always has).

    It's only a problem since upgrade to Windows 10. When I was installing Windows 10, I know that I turned off location services because I don't trust Microsoft with any personal information. However, thinking that this might be the cause of my problems, I finally gave in and activated the service return. However, it has not fixed the problem.

    I tried to change the settings for Google Privacy policy by clicking on the padlock and setting the access location to 'allow' but which does not have something or the other.

    I am at a loss. Firefox has been my main browser for more than a decade, but it's a deal breaker. I am currently working on a SEO project and I need my search results as specific location.

    Many Canadian and British users report that Google redirects is more research that Firefox sends to google.com on the local country site. Is that what happens to you, you get results on google.com , instead of google.ca?

    I have yet to see no explanation for the change, or any miracle. What I suggest is to install a google.ca- specific search plugin and do as your default.

    For example, this page has four options of Google Canada:

    http://mycroftproject.com/Google-search-plugins.html

    During the installation, should be offered the opportunity to make the new default search plugin. You can try it for a while and see if you like the results and, if not, you can change your default by using the Options page search section:

    "3-bar" menu button (or tools) > Options > search

    Who help me?

  • with win10, cannot open a session in the banking sector, keyboard corrupts the letters when you type numbers, can connect with MS Edge

    Try to connect to NWOLB, when typing my customer number, the numbers to change the mailbox from a and moving in the alphabet, for example 12345 shows that abcde.
    The numbers are part correctly if I will allow you to join the site using Microsoft Edge.
    What is an incompatibility between Firefox and Windows 10, or what I need to change a setting somewhere I use the latest version of Firefox.

    Thanks people, problem solved...

    Yes, it was Trusteer Endpoint Protection - otherwise known as report - Nat West Bank customers and highly recommended by them who was at fault. Turn it off solved it... Maybe I'll look to see if IBM highlighted in an updated version.

    Once again thanks a lot...

  • I want to put my favorites and contacts on edge too! Out port so I can use both browsers!

    I am downloading windows 10 and have so many new things, I want to stay with Firefox but must faves & contacts on both browsers.

    If you can give me some instructions on how to do it save me a lot of time!

    It will be fun to use some of the new inventions they have, but it doesn't feel like home.
    Thank you

    You want to copy your bookmarks from Firefox on favorite Edge? I found a few articles about how Edge can import from other browsers:

    I can't test these steps myself. They work for you?

    For contacts, Firefox isn't local storage, the data must be on the site where you get your email (for example, Gmail, Outlook, Yahoo) and should be available in all browsers.

  • How can I change the length of a photo in iMovie? I can't drag the edge because the cursor is red.

    I have a problem in iMovie 10.1.2.  I can no longer select a photo and to extend its length, i.e. from 3 seconds to 4 seconds. My cursor is red and I can't return the normal cursor.

    Hi, jhskyline,

    To change the length (duration) of a photo in iMovie 10.1.1 (latest version), select the photo in the timeline panel, and then click the Info button in the toolbar at the top of your screen.  It is one that has an 'i' with a circle around it.   On the right, you will see a box of duration.  Type in the length you want and press return on your keyboard.

    Another way is to expand the line of time slightly with the cursor located above the timeline and right next to the settings button.  Then, you can select the photo and drag his edge to extend.

  • Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.

    Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.
    Office Windows 7 2009 service pack 1 Firefox 26 Internet Explorer 10
    Flash player version 11.9.900.170 plugin 11.9.900.170 activex version used by Firefox

    Problem began late November when Miniclip.com forced updated flash player to version above
    -C' was when they started to play a video advertising in the game box before you could start.

    Have screen shots of IE10 and Firefox26 side-by-side clearly showing the problem - how these can be downloaded for see you? E-mail? Web site? This place seems to be text only?

    In the meanwhile the grandchildren and self have learned to use IE10 instead of Firefox that we prefer.
    Their House of Windows XP has same Flash Player in Firefox and it works fine.

    Downloaded two screenshots on Media Gallery.

    You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.

    Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    See also:

    Reset the zoom of page on pages that are causing problems.

    • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)

Maybe you are looking for