Tap to talk time does not work on my watch

Similar Questions

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• Face time does not work since this morning if my wifi connection is fine and parameters also very well.

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  Mamimisra wrote:

  IPhone 6, 114 GB, GB 72.6 available capacity. iOS 9.3.1

  Face time does not work since this morning. Connection Wi - Fi works very well

  https://support.Apple.com/en-us/HT204168

• The date and time does not work.

  I have an iphone 5 c.

  The date and time does not work. This is the second time.  The first time was about 3 to 4 months again and now again after upgrade to iOs9.3.1.

  Even after trying to change it manually, time slows down or stops.

  Everyone has problems with their date and time?

  • Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.
  • Restore factory settings (no backup)
  • Make an appointment at your local Apple store to have it checked.

• "Show my windows and tabs from last time ' does not work in version 3.6.8

  I select "show my windows and tabs from last time ' on the Options window - Panel general"when firefox starts", but it opens as my home page every time I start firefox.

  I tried this on two different computers. Both of them have the same problem.

  It worked fine in previous versions, but it does not work in version 3.6.8.

  If you use delete, search and download Firefox browsing history in Firefox 3.5 and later versions to clear the 'browsing history' the closing of Firefox then in restaurant tabs in the last session ("Save and exit" or "show my windows and tabs from last time ') does not work.

• Family timer does not work for Windows 8

  I can view the activity report and check the websites visited, but everything doesn't seem to work properly.  The time settings and the curfew does not work and when I view the reports using pc is far from what is used.

  Hello

  I would like to you can check this post about delays on parental control. Refer to the post of Eugene_R.

  Time does not

  Moreover, in a resolution of the initial problem, I suggest that reconfigure you the account user. Here's how:

  In Windows 8, you can use accounts of Microsoft as a user. You just link the Microsoft e-mail account to the new standard user. Follow these steps:

  Note: Make sure that you have an internet connection to create a user with a Microsoft account.

  1. press Windows key on your keyboard to access the applications screen.

  2. tap create an account (you will be redirected to search application screen automatically).

  3. click on settings (second option with the gear icon).

  4. click on create an account on the selection to the left pane. (You may be prompted for access admin select an admin user, and then enter the administrator password).

  5. in the account management window, click Add a user account.

  6. you will be prompted to add a user, enter the Microsoft account email address in the text box then click on Next.

  7. check This is a child account? Turn on family safety for PC usage reports.

  8. click on Finish.

  After you create the child account, you can then go to the Family Safety website, log in using the parent account and then manage restrictions and control of your child options.

  Second: In case you want your child free of any restriction which actually an adult account, you will need to just make sure that he or she is not a member of the safety of your family to check on the Family Safety website. To remove a child, go to manage the list of the members of the family. Select the account you want to delete by checking the box on the right, click on remove, then confirm by clicking on remove again.

  In case you have problems after deleting the account as a child, please update the personal data of the account by connecting to https://account.live.com/summarypage.aspx.

  Note: If you are currently logged in using your account, you must open a session and re-enter your child's account.

  Thank you.

• Lenovo U31-70 double tap on the touchpad does not work

  Hello

  I just bought a new Lenovo U31-70 with Windows 10 already installed on it. There is a problem with the double tap feature, it does not work. The feature is enabled in the option.

  This model of Lenovo has Alps touchpad driver and I am not able to find the place where activate the double tap on regedit, of workaround works instead if you have Synaptics drivers.

  Who can help me?

  Sorry... I found a solution in a similar topic, admin can close it.

• 14:Two yoga made 3 finger tap a click right does not work, no way to disable the Tracker for palm

  I have recently buy Lenovo Yoga 3 14 inches and have found that I cannot disable followed two palm or use two fingers click right tap function.

  I went in the mouse settings but still no help, it is said that tap two fingers is enabled but does not work, all other touchpad gestures work perfectly. I currently have the driver version: ELAN Touchpad 11.4.54.1_x64

  If it's any help, the virtual mouse device of Lenovo also has the version of the driver 14.20.52.752

  I already checked the MOMENTUM without result and also parameters of lenovo found in Program Files/Elantech. They both contain palm Tracker settings, but they are put at least still do not clear up my problem.

  If I can't fix the two finger tap or palm Tracker option that I plan to take my back just Lenovo for the hassle it caused.

  I did my research but still no results found. Help, please!

  That help me:

  I have the solution:

  Run regedit

  HKEY_curreent_user/elantech smartpad /software/.
  Tap_two_fingers value 1
  Tap_two_fingers_enable value 1

  Reboot and then you can use 2 fingers to the right click

• Class Timer does not work

  I needed a periodic showStatus funcation and read the setInterval docs where he suggests to use the Timer class instead.

  I gave it a try, it won't work. However, setInterval works

  Compiled with flex sdk "Version 3.3.0 build 4852.

  The player comments send me to http://www.Adobe.com/software/Flash/about/ which indicates that "you have the version installed in 10,0,32,18"

  Here is the code with setInterval enabeld (works) just comment this line and uncomment the section that uses a top clock to test the other case.

  package
  {
  import flash.display.Sprite;
  import flash.text.TextField;
  import flash.utils.setInterval;
  import flash.utils.Timer;
  import flash.events.TimerEvent;
  import flash.events.Event;

  SerializableAttribute public class Main extends Sprite
  {
  private var statusLine:TextField;
  private var statusText:String = "";
  private var statusTimer:Timer;
  private var timerStep:Number = 100;
  private var elapsedTime:Number = 0;

  public void Main()
  {
  statusLine = new TextField();
  statusLine.width = 400;
  statusLine.height = 400;
  statusLine.multiline = true;
  statusLine.wordWrap = true;
  statusLine.text = "start";
  addChild (statusLine);

  NOTE: Adobe livedocs for setInterval says:
  "Instead of using the setInterval() method, consider creating
  a Timer object, with the specified interval... »
  statusTimer = new Timer(timerStep,0);
  statusTimer.addEventListener ("timer", showStatus); A single sample it shows this way
  statusTimer.addEventListener (TimerEvent.TIMER, showStatus); The other sample reads
  statusTimer.start ();

  except that it does not work! stick with setInterval() for now
  setInterval (showStatus, timerStep);
  }

  private void showStatus (): void
  {
  var txt:String = "";

  elapsedTime += timerStep;

  txt += ">" + Math.round(elapsedTime/100)/10 + "."; "

  statusLine.text = txt;
  }
  }
  }

  Hello

  Once again, check the following Code. his work

  package {}

  import flash.display.Sprite;

  import flash.events.TimerEvent;

  import flash.text.TextField;

  import flash.utils.Timer;

  SerializableAttribute public class TestTimer extends Sprite

  {

  private var statusLine:TextField;

  private var statusText:String = "";

  private var statusTimer:Timer;

  private var timerStep:Number = 100;

  private var elapsedTime:Number = 0;

  private var count: int = 0;

  public void TestTimer()

  {

  statusLine = new TextField();

  statusLine.width = 400;

  statusLine.height = 400;

  statusLine.multiline = true;

  statusLine.wordWrap = true;

  statusLine.text = "start";

  addChild (statusLine);

  statusTimer = new Timer (100);

  statusTimer.addEventListener (TimerEvent.TIMER, fireTimer);

  statusTimer.start ();

  }

  private void fireTimer(event:TimerEvent):void

  {

  statusLine.text = "timer"+ counter fired;

  counter ++;

  }

  }

  }

• Toshiba 40TL838 - sleep timer does not work or works sometimes

  Hello

  I bought 40TL838 TV
  and I have problem with sleep clock

  does not work or works sometimes
  but usually, you see on the screen a minute left and TV never turn off

  I try to change the language and also options the system reset does not help

  and updated firmware is up to date

  any suggestion or help please

  I do not know if you are on the right forum because this forum is for Toshiba computers but let's see if anyone with the same device can help m.

  I put t know what the problem is here, but how it works you can read on page 48 in manuals s document.

  By the way: have you tried to contact Toshiba hotline and ask for help?

• Why my "display windows and tabs from last time ' does not work?

  Hi all

  I used to have my settings set to "display windows and tabs from last time." For some reason, it does not. Whenever I close my tabs, Firefox warns you me I close many tabs, and when I reopen it Firefox, I only get my home page.

  In the menu options, I put 'windows and tabs from last time' options, and in private life, I have "Firefox will remember history", so I do not think it is related to my settings.

  I saw a thread on 'browser.sessionstore.enabled' must be true about: config, but I don't have even a name preference that says "browser.sessionstore.enabled. Maybe that's the problem? If so, I have NO IDEA how to fix this. I only am not at all computer savvy.

  If someone could find a solution to this very annoying problem, I would be very grateful. If it takes a lot of work of programming/techno, please be VERY descriptive (pretend I'm a 5 year old child in giving directions).

  Thank you!

  Browser.sessionstore.Enabled is no longer used, worry not if you can't find it.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history – which will prevent the restoration of the work session.
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  You can check the prefs of . browser.sessionstore * including browser.sessionstore.resume_from_crash on the topic: config page and reset the browser.sessionstore prefs that are correct (in bold) user via the context menu in the default value to make sure that the Session Restore is enabled and functional.

  • http://KB.mozillazine.org/Session_Restore

• "show my windows and tabs from last time ' does not work after upgrade to 8.01

  After I've upgraded to the latest v8.01 I lost all my tabs sites and even trying to add them and save them with the tools > Options > general > start > when Firefox starts selected have to "show my windows and tabs from last time" she does not hold registered sites and browser restarts it always loses all tabs and shows only a tab with Firefox home Web page. I need to open several sites to work and the only way to do it now is to make sure, I click on the current use in "pages" under General Option of the tools. It's getting very boring because I keep changing my tabs to different sites in a meeting and I am used to simply close the browser, based on making them all back in when you restart Firefox.

  Have you tried to delete the file or move it to another location?

  There should also be a file sessionstore.bak that contains the previous session, i.e. the sessionstore.js file found at the beginning of the current session and is used to restore the previous session via ' history > restore previous Session '.

  Also, make sure that Firefox is closed correctly and that there is not any suspended the process Firefox

• Talk-back does not work for AutoComplete in firefox

  In my site, I used the features auto for the suburbs and I want to implement accessibility in my web site. When you view the website on a mobile in android accessibility mode I'm not able to reach the underside using Talk Back

  1 talkback does not read the values in drop-down list in the autocpmplete
  2. I'm not able to select any value in the menu dropdown.

  How you code the AutoComplete? Get to the States and properties such as I describe in this blog post? Or at least something similar? In addition, it is important that you insert the semi-auto items near the actual entrance, not at the end of the document, insofar as the screen reader will always use the HTML order, not the generated CSS visual layout.

• Automatic shutdown of the time does not work. I got him to turn off the computer at 23:00 and it doesn't. Help!

  It's not I the children side to turn off the computer at 23:00.  They are not allowed to use the computer after that but it does not turn off as before.

  Hello

  1 did you changes to the computer before the show?

  2. are you referring to Parental control?

  Method 1: Read the following article and try to set the parental control again and see if that helps.

  Control when children can use the computer:

  http://Windows.Microsoft.com/en-us/Windows7/control-when-children-can-use-the-computer

  You can also check:

  Set up Parental controls:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  Method 2: Restore the computer to a date when it was working fine.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

   

• Timer does not work

  Hi all
  I want to help with Scheduler, case is:
  the database is installed for the first time when the local database in the normal calendar.
  the server is in hijri,
  When I create a work schedule do not work when the next execution is delivered.
  Help, please

  Checking the job_queue_processes parameter system. It must be non-zero.
  In SQL * more

  show parameter job_queue_processes
  

  to set the use

  ALTER SYSTEM SET job_queue_processes= scope=both;