Taped interview

Similar Questions

• Use of Adobe Premiere to create clip - reports?

  To create video sets type - news-... I need to know if Clip

  * can Welcome a narration of journalist - voice - track instead of music

  allows a user to scrub the audio on a taped interview to carefully select soundbite incues and outcues?  (I need to - hear - audio I slowly move back / comes to choose the in and out points)

  * allows the user to save the file changed on the device mobile users (I guess that Yes) that max ground and in what format?

  Thank you

  Kirsch of Walden
  

  
  

  The audio track can be anything as long as it is MP3 - no matter if it's the music or voice.  You can only use an audio track, however.

  The output can be saved in the device in 1080 p.

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• Add my own background to an interview in iMovie

  In a split-screen interview I did there are a lot of deadpspace at the top and bottom of the screen (see image) I want to add a custom background that will run the length of the interview. How to achieve in iMovie? (See images)

  

  Have you tried ' Picture in Picture ' instead of the split screen? then you SEW using a video clip as a background and focus the other attaches in front of the background.

• Tecra R850-146 - where to find the interview guide?

  Hello :-),

  do you know where to find the interview of the TECRA R850-146 guide... If there is. Thanks in advance :-)

  Unfortunately, maintenance manuals are available for only authorized Toshiba service providers.

• Editing of the interviews / radio programmes

  I need a program I use to create / modify interviews on the radio and / or radio programs - multi track audio editing is all I need for now.  I need essentially what was once called a "Mixer" (at the age of the machine).  Microsoft has a?

  Thank you

  Ken

  The free Audacity software might be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity
  http://Audacity.sourceforge.NET/ Features of Audacity:
  http://Audacity.sourceforge.NET/about/features

  Audacity - Frequently asked Questions - FAQ
  http://Audacity.sourceforge.NET/Help/FAQ

  The Audacity Wiki tutorials
  http://wiki.audacityteam.org/wiki/category:tutorial

• I would like to record the interviews available on a specific Web site, how can I do this?

  I would like to record the interviews available on www.epicenterconference.com. Successfully, I downloaded and saved the audio/video files that I discovered on www.morelifenow.org. The General method to save and back up files, you want to be able to view on the net would be a powerful thing. They have to be installed on the host to be 'downloadable '? Is there a simple method that I'm missing?

  * How can original title - I save a file that I consult on the enternet on my drive? At a conference.*

  Hello

  What browser do you use?

  You may need to install a third party software to download video or audio files online.

  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  The video buffer in internet explore can found at the following location: C:\Documents and Settings\ [username] \Local Settings\Temporary Internet Files

• I have Windows 7 Media Player and that you want to know why, after burning an album of my playlist it records, but there is no sound in playback of the CD, that I taped?

  I have Windows 7 Media Player and that you want to know why, after burning an album of my playlist it records, but there is no sound in playback of the CD, that I taped?

  HI - what device you are playing it back on?

• Resolution of issues interview

  Hello

  I have interview for internship. I asked myself the following questions. I was wondering if you guys can help me to answer this question.

  (1) that you have this topology. You have 10 PC that you are patching to spend. However when you connect the Ethernet cable, PC10 doesn't connect to (ping doesn't bothside). How did solve you this? (ALL IP ARE STATICALLY ASSIGNED)

  yugsb.PNG

  

  Answer: This is what I do trees, check the cable between 10 PC and switch, Check Switch port, check assign you IP to 10 PC correctly, last thing I do is to check the NETWORK card on the pc.

  (2) you have this topology. In this scenario, the router can talk to but the switch does not have to talk to the router. How do troubleshoot you it?

  1eeij.PNG

  

  Answer: Firewall treat the outside router and switch inside. So switch cannot see the router but the router can see pass

  (3) you have a network device. It has 9 cards/module. They are all identical however card no1 and no2 does not normally where others work very well. How do fix you it?

  Answer: first of all I'll take the cards that are defective and test to see if it works individually, otherwise I'll pass on info for an electrical engineer to see if there is hardware failure.

  FYI - IT IS UP TO CCNA LEVEL BASED INTERVIEW

  If the module is defective, we can check the logs if there is an associated alarm (see logging)... or we have coordinated with the seller to help you solve the faulty module. There is a command called a show of support, this will display a lot of information about your device and modules installed on it.

  Take a look at different audit controls, but some are available for specific platforms

  http://www.Cisco.com/c/en/us/TD/docs/routers/CRS/software/crs_r4-2/adv_s...

  hope this helps.

  concerning

• OPA can produce Excel or XML files at the end of an interview?

  OPA to use BI Publisher to output PDF or PDF/A files at the end of an interview is a piece of cake.  In the Office of BI Publisher there are options for the use of the model output in several different file formats, but I have not seen a way to do it in the OPA.  The new button in the OPA in the Forms tab only generates a RTF.

  The form template is always RTF.  You specify the type of the form file when it is added in the interview:

  

  http://documentation.custhelp.com/EUF/assets/devdocs/february2016/PolicyAutomation/en/default.htm#guides/Policy_Modeling_User_Guide/interviews/screens/Add_forms_to_screens.htm#specify

• Is it possible to reset an attribute in an interview?

  I need to leave my clients to change their minds on something and then have the related attributes False or unknown value.  For example, the maintenance request "want to buy an extended warranty?  If the user answers "Yes" then a container with a question during the period becomes visible and the user selects '12 months' among the choice and then pass through the interview.  At some point the user changes his mind about the extended warranty, goes back to the question "Do you have an extended warranty?" and becomes the 'yes' 'No' and then proceeds to finish the interview.

  I want to be able to reset the attribute of warranty return 'unknown' or at least '0', based on the new answer 'no '.

  How this is done?

  With the help of a simple rule such as the following does not work.

  Warranty period = 0 if

  Warranty? = false

  Once you have entered a value of an attribute you cannot deduce it a different value. You may achieve what you want here in having 2 attributes, "asked the warranty duration" and "guarantee length" with a rule something like:

  

• An interview may be for a Contact and one account at a time?

  I set up an interview for use on CP pages (where a contact must be registered to access the interview).

  Now I also want to put this in a workspace to be used by agents, I don't see a way to put this for both uses, so is it possible or I will have to have two different interviews?

  Thank you

  Paul

  At present, the best way to have a "single" interview which takes in charge agents and contacts is to place all the rules/split screens in a project, and then create two other projects which include it: one that is for the agents and the other which is for contacts. You would deploy and manage both projects separately, but can easily update shared screens and through the inclusion rules.

  We intend to support multi-channel (agent + portal customer) interviews directly in a next version.

• Receive error message when adding the control of signature on the screens of the Interview with the OPA

  Hi team,

  We have an obligation to add electronic signature on multiple screens of interview.

  I tried to add the control of Signature in the form of the interview, but I get the error message below. We use the OPA 12.2 version November cloud.

  "Current data mapping settings do not support file attachments. File upload controls is no longer valid. (OPA-E00538)

  Thank you

  Vivek

  Yes. And make sure that you submit to a Service Cloud FileAttachments active or item by using a connection to the web service that supports attachments for the entities mapped on a.

• How to secure Interview session URL

  Dear developers of OPA,

  We use the OPA cloud in our project.  Can you please indicate if it is possible to get the URL of interview Web determinations with authentication of the user name and password?  I found security to web service API in the guide, what other URLs - maintenance service?  We would like to limit access to our Interview screens, not open to anonymous users.

  Thanks for your help.

  Yes, you can secure the OPA interview URL clouds, even when these talks are not connected to the Cloud Service. This is done using a web services connector, even if you do not use this connector to web services to load/save all the real data.

  The basic model is the following:

  1 use the structure of connectors OPA to develop a web services connector that will check the user credentials (and any load/save of interview data - if you do not want to load/save data you can just return a shadow table in the form of metadata, and ignore it when comes the request to charge)

  2 deploy somewhere this connector available to the OPA cloud (e.g. Oracle Java Cloud or any other Service which is public)

  3 connect to the Hub of OPA that points to the URL where the connector is available

  4. create your interview in OPM and make sure that the map settings (a) use the configured connection and (b) are configured to load at least some data at the beginning of the interview

  5. before the beginning of the interview, make sure that your user is connected

  6 spend a limited non - token to guess on the startsession URL to indicate the identity of the user who is logged in

  7. in the execution of the query web service connector charge, check the token is valid and possibly what it corresponds to other identity information through the header http as configured to connect to the web service

  8. If the user is not valid, an error to load demand

  9. If the user is valid, return a normal response of the load

  See "understanding the flow of communication in a safe interview, depending on context" section in the documentation for the OPA for more details.

• How can I prepare for my interview?

  Hello friends,

  I have about 10 months experience in IOM 10 g and 11g R2ps2 and tomorrow is my first interview as an experienced person. Can you please tell me some important questions I need to prepare for tomorrow?

  So far, I have worked on (UI and part of development) and also makes the integration of the IOM - OID

  Thank you

  SuperCoolDamnAwsome

  For most people ask questions according to your Job description of role and responsibilities that you have done in the past.

  You can google interview questions and find some good questions. (Deepak Dubey on Oracle IAM: Interview Questions Oracle Identity Manager (OIM))

  HTH,

  ~ J