Target subnet mask and the gateway in different subnets and clock error

Hi all:

Need help. I have a standalone PC operating a direct VI on a CFP with a crossover ethernet cable (developed on my laptop, compiled and installed as a standalone on the PC). When the VI runs on standalone PC version, everything works (click the button, analyzers are read), but the time being pulled from the CFP is wrong, and infact resets to December 1969, a default value. I am error checking, and no error is marked with the CFP, slaughter programmes. When I go to the MAX function, the time playing of the CFP is the funky time. Looking at the IP addresses, I generally use a very standard protocol (192.168.000.001 for the PC, 192.168.000.002 for the CFP currently running on the subnet for the pc and the PSC 255.255.255.000). However, when I apply this Protocol on the CFP through max, it gives the error "the subnet mask you entered puts the target and the entry door to different subnets." I am not versed enough well understand this, and what I read in 2 postings here, I tried to harmonize the IP numbers and the subnet, and they do not seem to help. When I put intentionally in false numbers IP or subnet default time synchronization time correct (pc), but functions block (as expected). It is certainly not an issue of PC zone.

Anyone can offer any guidance?

Currently runnig LV 8.2 with drivers of 2009. PSC 1804 with MAX 4.6.

I appreciate all help.

Best regards;

GIS.

OK, I solved it. FYI: for those who are not aware of the IP: IP of the host and default gateway server to the same value. My work for the host computer are 192.168.000.001 and subnet masks can stay 255.255.255.000. The CFP has been set to 198.162.000.002 with a 90.00.00.03 DNS. Time server has been blocked by the Norton 2009 Firewall (even with an exception) and thus the cruxt of this issue together. I had to uninstall completely from this "software". I hope this helps.

Tags: NI Software

Similar Questions

  • Movement of mask and the track Matte Question - why it doesn't work?

    Hi first gurus...

    I am able to use the first titration module - to create a mask - then the Luma put on the effect of TrackMatte to isloate a region of the video (I duplicated the original) which I am interested.

    -By of many tutorials/videos online, I've found.

    Question: Why - can I not use the mask / "exit" from the ThreeWayColorCorrector to do the same thing?

    Image - duplicate the clip - drop the ThreeWayColorCorrector - using "High color" mode - to isolate people form (from an extract of the interview);  the background is black... the contour hair root and the body of the interviewee is white.

    I get white/black - because I passed the exit of the ThreeWayColorCorrector to 'mask '...

    Now - when I drop this clip on my video editing - that I use for the TrackMatte effect - it does not work as I had expected, it could - at all...

    Very disappointing - it would have been a very powerful way - to create a mobile cache to work with the TrackMatte effect...

    If someone has done something like this before? Y at - it an easy solution - or a setting that I missed...

    This should work really - not?

    Some information:

    I work with a GreenScreen shot - with lighting poor to separate the hairline of the screen.

    Work with green screen - subject to blonde hair.

    I thought that the retro-lighting/hairlight was not necessary - I was wrong.

    Now with the green screen hidden using this ultra key - get jagged effect around the airline and what looks like the snow and noise around the fringe.

    I thought en - 1) video duplication and combining with effect 2) TrackMatte - use a mobile mask that matched just the root of the hair/plan - I might be able to blurr the edge enough to get rid of the unpleasant effect I see...

    As BIG as the UltraKeyer is - different parameters of transparency/spill/Starter/soften seem not to be able to remove the ugly/noticeable hairline artifacts that I see...

    New - look like jagged effect / snow...

    Any thoughts?


    Thank you

    F

    In my opinion, the track-bearing on Pr capabilities fall away from the brand.  The fact fcp7 as it is very useful.  The limitation of the matte in public relations is that the mast is adjusted on the layer is hidden.  You can animate and change the scale and position of the track matte layer, but if you want it to run in smooth synchronization with the matted layer, you're in for a bit of work.  Ideally, you should be able to pan and adjust the layer being hidden inside a motionless mask.  Can-do that elegantly in PR.  This is a faulty design of the Pr, IMO.

    As a general rule, you must go to EI for the good contols, where you have all the power of masking you need, with the exception of the variable feathering, and who is rumored to be included in AeCS6.  Also it would be nice to be able to follow the points of mask, which is not currently in Ae either.  But that's another debate.

    That said, I am able to use the mask to a secondary use as a Luma matte.  Not sure why it does not work for you.  Have you played with the secondary commands sweetness?  I couldn't even be after what is your problem.

    However, here is a tip that I use with Ae that might work for your problem of inlay.  Use two instances of the Keyer.  Use all first to create a "garbage" key, where you will have the most greenery, leaving only a border around your subject.  Then, you can use the second instance of the Keyer to hone in on the edges.  Give it a shot.  Might work for you.  This method gives you an option to avoid the harsh cleanup settings of Matte with eradicating all the Greens in a framework.

  • can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

    can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

    Yes. The only problem that I see if Macs were different countries. The method of payment in the account/ID must be associated with the country where the unit is located and you can only buy Apps from the store of the country where the computers are located

  • the imei/meid number on my box and the Bill is different from what it shows in the icloud settings. Should what code I provide legal officials? I lost my phone

    the imei/meid number on my box and the Bill is different from what it shows in the icloud settings. Should what code I provide legal officials? I lost my phone

    Did you buy it an Apple Store, another store or regular carrier or as a boon to someone else?

  • Do you know how to copy certain tasks in the calendar and the past on different days?

    Do you know how to copy certain tasks in the calendar and the past on different days?

    This year, I even tasks to every month, so it is difficult for me to create new tasks for the same information. I can't find how to copy beyond the tasks, so if someone could help me I aprecciate it.

    Thanks in advance!

    Select, press COMMAND = C to copy it to the Clipboard; Select the date that you want a copy with the mouse, them press COMMAND\-V to paste. If you want a repetitive task, you can select the item and double-click it to open it, and then the pop up config, select repeat.

  • Can I do compare material using hsdio during the generation and clock speed of CQI are different

    Hello

    my application needs to generate a digital stream to A clock frequency with width of bus (number of bits) very from 1 to 4 bits

    IAE response will always be on the bit but with a B clock frequency.

    1. can I use the advice hsdio hardware comparison mechanism.

    2 If the answer is YES, there is any sample that can help me to get started.

    Thanks in advance

    Daniel Gabel

    Hello

    Yes, you can compare material with different rates of acquisition and generation.  There are several examples that are provided with the NOR-HSDIO driver.  There are some examples of physical comparison you would like to check.

    Jon S

  • the NI 9871 serial ports appear also in MAX with built-in serial ports of the target - under devices and Interfaces IS NOT? NO NEITHER 9871 (Scan Interface)?

    Hi - Have cRIO

    Can someone help me get the NI 9871 (Scan Interface) work?  My two 9477 and two 9425 and 9403, function with the scanning Interface.  In MAX > software > NOR-Serial RT 3.82 > NOR-Serial 9870 and Scan Engine Suport 3.8.2 9871 BUT NOT == MAX > devices and Interfaces > series & parallel = number of Ports Com for 9871 listed?   Project, 4-port RS-485 NI 9871 is in slot1?  Any help appreciated thanks

    the serial ports on the NI 9871 also appear in MAX with serial ports integrated target under devices and Interfaces

     

    NEITHER 9871 (Scan Interface)

    I left the Slot 1 Slot 8 9871 Know works and MAX displays 4 COM ports.  Something is misconfigured in Slot1?

    Solved!

    Thank you

  • If you print a document from an e-mail, why is the document different on another computer? The pagination is different, and my boss thought that I modified the document?

    If you print a document from an e-mail, why is the document different on another computer?  The pagination is different, and my boss thought that I modified the document?  I have not change the document - I just printed it e-mail, he says than the version printed on different is his version on his computer - and I have nothing but print it.

    Could answer you my question today?

    Thank you

    Hi MBS_PITT,

    The print can be different depending on the print settings and the settings of the computer on the other computer. If you want the same settings, then you should change the settings accordingly before you take the print out.

    For more information, you can consult the following article:

    Print a document or file

    Hope this information is useful.

  • With EM data masking and other utilities of security features available within the DB package

    Hello

    Please let me know your experience of the difference between EM data masking Pack and other security elements such as writing, available in the database Vault.

    Kind regards

    VN

    Hide data are used when you have to clone the database of production for developers. Its purpose is to sensitive data mask in the clone database and you can use several formats of masking (numbers random, random strings, shuffle of data, etc.).

    The masking process is irreversible. (http://docs.oracle.com/cd/E11882_01/server.112/e41481/tdm_data_masking.htm#RATUG04000)

    Writing of data (http://docs.oracle.com/cd/E11882_01/network.112/e40393/redaction.htm#ASOAG596)

    "Starting Oracle 11 g Release 2 (11.2.0.4) database, Oracle data writing allows you to hide (delete) data that are queried by applications or limited users." Drafting occurs in real-time when users query the data. Drafting of data Oracle is part of the Oracle Advanced security features. »

    In a nutshell, you create a policy of writing for a table using DBMS_REDACT package that will redact (mask) data for some users - depending on your political - select.

    For example, a group of users will not be able to view credit card numbers (1234 5678 1235 5690-> * * * 5690). Please note that the data are not hidden within the table.

    Database Vault is used to restrict powerful users (users with system privileges) to access some objects (and not only). Please see the DEMO on this link ( Oracle Database Vault |) Oracle database | (Oracle ) "

  • Select and update the mask of the new cc

    I make a selection using the lasso tool > go to the Select again and the mask. When this window opens, my selection is a party! Tried to go directly to the Select and mask and make the lasso selection, and the moving dotted line disappear until I can feather! What I am doing wrong, please.

    Sheila

    Glad it worked for you...

    Please mark my answer is right

  • Mask and the magic wand in the Select

    In Using Photoshop / select and mask Workspace for 2015.5 CC, it is said after the launch of Select and mask workspace allowing, "a selection tool such as the Lasso, magic wand, or quick selection. Now click on select and mask in the Options bar. "But when I run S & M, the magic wand is not available. Is it possible to add it?

    Martin

    If you mean the magic wand tool, no. There is only the regular lasso tool and the quick selection in the selection and the mask tool.

  • Select and artifacts of mask using the new refine edge

    Hi all

    is - that someone else has had this problem since the last update version 2015.5.0 Photoshop?

    I find strange artifacts when using select and mask and the new brush refine edge that would not happen in the old refine edge.

    The Alpha channel looks good but the image shows of strange artifacts and blurry tasks and resembling traces of brush end hard.

    I took the time to correct my mask in order to remove any traces of brush hard edge, but they seams to still be there. I find it very frustrating.

    Select & Mask Blurred Artifacts.jpg

    Hmmm... think I just found the answer to my question. I got the color box to decontaminate tiquetee.

    I have hidden without this box and the blur and artifacts disappeared. My recommendation for anyone making high range of editing and masking is to leave this box unchecked.

  • The current state of the target is down and it displays red arrow down in OEM 12 c. But in fact the database is running

    Hi all

    my instance of database shows down in OEM 12 c but in fact the database is running and status of the listener is unknown. What steps should I take to make the database appear?

    FYI,.

    The error is:

    The current state of the target is down. (I checked events tab in the incident handler here, it is showing error as "inaccessible agent (reason = unable to connect to the agent to https://sunshine.mad:3872/emd/main / [connection refused]).") host is accessible.

    A week before I made switch to digital, the basics of data, is that this is the reason why it shows this error? do we need to change any configuration after switching to the databases on OEM 12 c. at this point time of the database instance shows down and the listener to the top but suddenly the database and listener went wrong.

    Please help me, give your suggestions in this regard.

    Verify that the agent is in place and suggested downloading like Antonio. For the target of the database, the home page, go to the (Oracle database > Configuration target >) Configuration of the analysis page, check the monitoring parameters are correct and do a test connection. You can check the parameters of surveillance for the target of the listener as well.

    Kind regards

    -Loc

  • have 5 LR and CC. The folders are different, some are missing in the CC. And some complete are not available in CC. I'm looking forward to use CC rather than LR5 so how can I make the folders and collections even on each?

    have 5 LR and CC. The folders are different, some are missing in the CC. And some Collections are not available in CC. I'm looking forward to use CC rather than LR5 so how can I make the folders and collections even on each?

    Hi cjohnm,

    You can use the 5 Lightroom Catalog and improve it in Lightroom 6, therefor all folders and collections will be identical in both version.

    Open the Lightroom all holding the key Alt/Opt and select only the 5 Lightroom Catalog and it will switch to it.

    Let us know if that helps.

    Kind regards

    Mohit

  • How interrogate the EM repository for a list of targets that have no targets defined properties and therefore will not be members of groups identified by the hierarchy of administration.

    Hello

    Asked me to do in control cloud 12 c,

    ""Repository queries EM to get the list of targets that did not target defined properties and therefore will not be members of groups identified by the hierarchy of administration.".

    and I was looking for more information on how to do it but I can't find anything on the repository tables, and I can't find how to get this cloud control options.

    Thank you

    Matt

    Management Group page, go to the Associations tab and click the target report unassigned

Maybe you are looking for