Task Manager Windows 'show all processes from all users' will not work

Similar Questions

• My phone fell, and I can not get Windows to start. The repair option will not work.

  Windows Vista restore

  My phone fell, and I can not get Windows to start.  The repair option will not work. I tried to use an upgrade disc, but the 'upgrade' function has been disabled. It says I have to do it from the office, to which I can not access. The repair disk feature did not work either. Is it possible to restore the system without losing my files?

  Have you had your laptop, checked by a technician?

  If you use a 32 bit Vista copy then any upgrade must be run from the Vista desktop.

• The task manager has started to appear without borders and will not go away, unless the computer is off.

  When using the Ctrl-alt-delete option and the Manager tasks appears it seems without borders.  The task manager remains after the programs are all closed and will not go away, unless the computer is off.

  It's called mode 'small footprint '.  Double-click anywhere on the border of the Task Manager window and you will get the Menu bar in the rear.

• Reinstalled Windows 8 and now the product key will not work.

  Original title: about product key

  I upgraded from windows 7 Home Basic for wondows 8 pro.

  n the day before my bones broken coz I rights os partition, then I installed again by making the USB bootable iso file of windows 8.

  and now the quiality key that I brought does not work...

  What to do!
  Help!

  Hi James,

  I suggest you to see the following link on how to install Windows 7 using the recovery disk.

  Installation and reinstallation of Windows 7 (Windows 7 reinstallation)
  http://Windows.Microsoft.com/en-in/Windows7/installing-and-reinstalling-Windows-7

  Once you install Windows 7 on the computer, then you can perform the upgrade to Windows 8 and then activate Windows 8.

• Help! All programs will not work. I get the error message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  When I try to run a program (Internet Explorer, Firefox, CCleaner, etc..) I get the same message: "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. "

  I can't find the "Set Associations control panel" and am not sure that he would go if I could find it, and if it work I do not know I know what to do. Help!

  Should I re - publish so that else soeone looks like?

  If you wish.
  Make sure you add a line right at the beginning: you are reposting because we could not have solved other fold it.

  Alternatively, you wait for the next person coming.

  The choice is yours, although generally you would be advised to stay put and wait. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Update to Windows 10 has failed and now PC will not work properly!

  Tried to update to 10 - failed - now being told invalid product key it is and have used it for 3 years!

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on the link 'change product key '.

  Enter the product key located on the COA sticker attached to the bottom of your laptop or in the battery compartment. Click next to activate via the Internet.

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  ??

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

  or

  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Alternatively, you can try to fix the following:

  http://support.Microsoft.com/kb/2230957/

• Windows roll 10 back to windows 7 and now my adobe reader will not work.

  my computer won't let me open PDF files.  I tried to reload and delete Adobe reader and my computer gives me an error "the component you are trying to use is on a resource not available network.

  I can't uninstall either.  I get the same error.

  Any suggestions to fix this?

  The cleaning tool did not work.  still got the same message.  I found and followed this link and it seemed to fix it.

  my download install when it reads the file "missing acroread.msi '.  How to do this?

  Thanks for your quick response.

• CS5, installed from a backup does not work in the new iMac w / El Capitan; the discs moved

  My 2011 iMac has a failing hard drive. I downloaded a full backup, including the CS5, in a new iMac running El Capitan. None of the Adobe programs will run, even after I installed Java SE 6 & restarted. A Setup from disks, starting with Acrobat 9 Pro disc and after dragging the applications icon, gave me this: "the operation cannot be completed because one or more required items be found.» (Error code - 43) »

  I deleted programs meeting CS5, rebooted and tried to load again from the disk of Acrobat 9 Pro. After dragging the applications icon, I got this: ' the finder cannot complete the operation because some data in "" cannot be read or written. ". (Error code - 36) »

  Updated his computer at El Capitan my wife and charge of Java SE 6, and his CS5 still works. What can be done in my case? Thanks to all in advance!

  Download from a backup will not work.

  You must install it.

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

  But CS5 wil cause a lot of errors on El Capitan.

  They simply are not (fully) compatible.

  Just search for it on the forum, you will find a lot of threads.

• Windows VISTA BIT missing Modules! Updates to the installer will not work.

  MY windows progam (and several other installation programs) will not work.  I went down to the BITS service does not.  I found several remedies that include restarting or re-configuration of the service.  However, when I try to start to change the service in the Control Panel, I get a message that the modules of BITS are not!  Can my BITS have been removed?

  Note: I had my living room PC to eliminate an infection particularly bad virud - perhaps they removed too?

  Pavillian Mediacenter HP with Windows Vista Edition Home Premium (x 32)

  Thank you, DRC

  Hi DCassie,

  1. Have you tried the 940520 full KB?

  If you have not completed the Ko 940520 try the full article and check if it works.

  If the article does not help then to recover a corrupt service, you will need to perform the repair installation of Windows vista and the Windows vista disc, you cannot perform repair installation.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• In the Windows Task Manager, I have 76 processes running. What are they all? Can I reduce/close them?

  In the Windows Task Manager, I have 76 processes running. What are they all? Can I reduce/close them?

  I am only a very lightweight browser and the user of the social network. I do not use my PC for something else.

  It is average for a system Windows does not.

  Windows is broken down into different components so they can be executed in parallel to improve performance.

  Their closure will cause your computer to malfunction and eventually fails.

  Run process Explorer to give you a description of each process and information on the services that are running in each svchost process.

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

• Task Manager Win7 showing wrong memory values in the process bar

  I've been running Windows 7 64 bit Home Premium for quite some time now (2 years or more) and I have not encountered any serious problems. But recently my task manager started showing some strange values for all processes in the list. She says that explorer.exe is using a maximum of 65 k, which is the highest value compared to others except for firefox, which rises to 130 kb. I searched all kinds of forums and couldn't find answers. It is not a serious problem, but it makes it very difficult to know when a game or a program uses to much memory.

  I don't know exactly what card to set up here. But here are some of the most important, that if all goes well, it is not my hardware.

  OS: Microsoft Windows 7 Home Premium (6.1.7601 SP1 Build 7601)
  Processor: Intel Core i7 - 2600 k CPU @ 3.40 GHz
  RAM: 8 GB of DDR3 memory (I don't remember the exact manufacturer)

  I hope someone can help me
  -Rasmus.

  According the information that you have provided, I don't see anything unusual.

  My explorer.exe and IE9 using the same amount of memory (private beach).

  Edit: 25/10/2013 - after reviewing your original question, I realize, my answer was incorrect.

  The values must be higher.  See the last post by Emil Prager.

  I apologize for my control.

• Firefox will not hold, but shows in the Task Manager, after updating graphics drivers from AMD 13.1.

  Hello

  After update for drivers AMD 13.1 on my 5770, Firefox will not launch; It doesn't, however, appears in the Task Manager. I want to emphasize that it will boot into Windows safe mode; When I opened it in safe mode, I used this time to deactivate all plugins, modules, extensions and created a new profile. This did not help. I also tried launching Firefox in its safe mode and had no luck with that either.

  I encountered this problem once before, when trying to upgrade to an earlier version. I think I was moving from 12.1 to 12.4, but I'm not 100% sure of that. In the end, my solution was then to retrograde back to my previous driver. The steps mentioned in the previous paragraph has not helped at that time, not do a complete reinstall.

  experience of 15 years, and that computer repair baffled me.

  Thanks to all those who might be able to help.

  Eventually the relevant specifications.
  Windows 7 Ultimate x 64
  AMD Phenom II x 4
  Ram 6BG
  Chart AMD 5770, running catalyst 13.1

  See here

  • https://support.Mozilla.org/en-us/KB/Firefox-wont-start-find-solutions

• I work with dreamweaver cs6 running on Apple Mavericks.  The site definition window shows all different fields by opening. I have to click blind with the mouse cursor in this window until the fields appear.  It is a very bored

  I work with dreamweaver cs6 running on Apple Mavericks.

  The site definition window shows all different fields by opening. I have to click blind with the mouse cursor in this window until the fields appear.

  It is somehow very annoying to complete the connection to the server and all the other things.

  Is there a solution?

  If this is the case, I think that it is perhaps a good idea to uninstall Dreamweaver. Before you reinstall, make sure that your personal configuration file has been deleted (see reinstalling Dreamweaver (or the extensions Manager) fails to solve problems). You should then have a completely clean copy of Dreamweaver has again the default settings of the program.

• When I press tab, annoying toolbar appears in front of my window showing all my open windows, how can I stop this?

  When I use the tab key on my keyboard to try to move between fields on the screen, instead of move the cursor, I have a toolbar that appears in front of the window, showing all my open windows. I don't want to get more, please tell me how to stop it.

  Sounds Windows thinks that the Alt key is pressed (yet).

  This help if you press all the keys (shift, Ctrl, Alt) state several times?

  Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• My Task Manager window no longer displays the different tabs to see the applications/processes/services, etc.. How to restore the tabs?

  The Task Manager window only displays running applications and without tab at the top of the window nor allow me to use the X th close the window.

  How to restore the window to its normal appearance?

  Although written for Windows XP, the resolution found in this FAQ is always applicable.

  Why be part of my task manager disappeared?