TB change the sender name to my name to email classic. Fritz! Box send a pushmail with the name "Fritz!" Box '. In the Inbox of my ISP of this name is present. ...

TB change the sender name to my name to email classic.
Fritz! Box send a pushmail with the name of the sender "Fritz!" Box' to my standard email address.
In the Inbox of my ISP of this name is present. Get this mail with TB the name "Fritz!" Box"is changed in lastname, firstname. This is the full name of my standard email address as I stated in my address book.


In the toolbar > Options > view > advanced and turn off "see the show only the names of the people in my address book."

Tags: Thunderbird

Similar Questions

  • I have the English version of adobe photoshop elements and I would like to change the language in Dutch. Is this possible?

    I have the English version of adobe photoshop elements and I would like to change the language in Dutch. Is this possible?

    This page gives some information on the change of language

    Exchange a product for a different version of the language or platform

  • Change the screensaver to logon and get this error message - is required to run this screensaver Direct3D 9.0, but cannot be found.

    I changed the idle screen to login to one of the windows Vista by default (ssText3D.scr).  and I get this message:

    Direct3D 9.0 is required to run this screen saver, but cannot be found.  Please install the latest version of DirectX and try to re-run the screen saver.

    DirectX is installed. The screensaver works if someone is logged even if it is locked, but not to the logon screen.  All the patches?

    Hi pfdr70,
    1. are you able to apply other screensavers?
    We recommend trying the following steps and check the result.
    Step 1: Download and install the latest video card driver.
    1 visit the system manufacturer's Web site, download the Vista compatible video card driver and install it.
    2 restart the computer so that the changes take effect after the driver installation.
    Step 2: Set the monitor to display better.
    See Get the best display on your monitor
    Step 3: Enable graphics acceleration.
    1. open display settings by clicking the Start button, clicking Control Panel, on appearance and customization, personalization, and then clicking display settings.
    2. click on display settings, and then click Advanced settings.
    3. click on the Troubleshooting tab, and then click on change settings.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    4. move the slider full hardware acceleration.
    Kind regards
    Answers from Microsoft supports the engineer.
  • Change the page layout in iExpense so this button bar is shown only once.

    Hi all

    In our standard iExpense page, for Exam fee screens button bars are ongoing posted TWICE - at the top of the page and the bottom. But I want that this button bar to display only once. I tried to see where it is defined in the section of page layout to reorganize but am unable to zero in where to make this change.


    Kind regards


    You mentioned, I submit my page, I am taken to review the page again.
    The review page is the second page on the right, how you found the box on this page.
    Maybe the same region is divided between the first and the second page.

    In this case, when you get to the second page (review) must check your controller extended with page you're in and get the handle of your box and make it readonly.

    Otherwise, add your checkbox in a region where it is not shared in the review page.

    Thank you.

    With respect,

  • What would be the best way to change the color of a part of this picture? (image attached)

    I am on XP using PS CS4.

    Please see the picture below. I would like to change the color of the shirt/deck of this lady, and I was wondering what the best way is to do it. I know that if I try to change the color, white bowls change color as well. In the past, I've isolated parts of images using paths, but I wanted to know if it was the most effective way. Maybe the masking is the answer. I just wanted to hear from the pros


    Thank you.

    I'm not pro, but you can isolate areas likely to be affected by the change of color. Try the quick selection tool (which detects the edges) with mask edge/refine refine to refine the selection.

  • my google email acct in MAIL is showing offline. I need to change the password - how can I do this?

    I have 3 email accounts set up on my laptop (mail). The acct of Google shows offline, probably because I had to change my PW. How can I change my password on behalf of Goodgle?

    Applications/Utilities/Keychain Access and remove the old password.

  • We have no admin on Windows 7 users. They change the homepage and it works for this session. When they close the browser and restart again the default home page is displayed.

    Windows 7 Sp3. using Firefox 7.01
    Non admin users.
    Home page change to what they want and it can work.
    BUT when they close firefox and open it again the home page goes back to the default setting

    You have a (security) installed software that can restore files when starting?


  • My brushes loaded disappear whenever I change the brushes, how do you keep this?

    I am a new user of PSE9 and I have some knowledge base on how to use the free trial program. Now that I actually purchased the program I want to download new brushes. I downloaded the brushes that I want, but whenever I have load into my palette, brushes are there for a single use.

    What I mean is that I can use the brushes I want until I have change a brush of different. I still have them on my computer, but it bothers me that I have to reload my brushes each time I want to use.

    How can I keep my brushes here, like the catergories of default brush Photoshop already provides for you?

    You put them: (copy the brush files)

    Adobe Photoshop C:\Program 9\Presets\Brushes elements

    You must restart the items runs for brushes to appear.


  • 5 Firefox private browsing mode changes the google search page. Is this normal?

    Since upgrading to Firefox 5, I've noticed that when I switch to private browsing mode and go to Google, the menu at the top has a black background. I don't mind that it's a nice reminder that you're in private mode. I was wondering if this is normal?

    Google experimenting once more:

  • on my laptop I have a sign of bluetooth previou day luminous sign is turned on and the next day, he does not appear and also nat open bluetooth change the seting wht can do for this

    Please answer me soom me wory very


    · What is the number and the model of the computer?

    · What is the Bluetooth device built into the computer?

    You can check the link below and try the steps listed and check to see if this helps: how to solve the problems of connectivity and Bluetooth detection in Windows XP Service Pack 2: http://support.microsoft.com/kb/883258

  • E-mail account. Cannot send emails on iPhone and iPad after changing the password

    Due to my hotmail hacked on my laptop, I changed my password. I can now only receive emails on my iphone and iPad, but I cannot send emails. A notification comes up saying the user name or password is incorrect. Is there anything I can do to solve this problem. I remove the email account and put it in again with no luck.  Hoping someone can help...

    This means that the password is not accepted. It is typed wrong on the phone, or misspelled or you must reset the password again.

    Have you by any chance changed any server options when you were changing your e-mail iPhone settings?

  • Change the time for the scheduled task, I added

    I created a schedular system file (.vbs) that supports the backup of the database of one of my application. I added this file to the scheduled task. I put the time of execution to 15:00 daily, now I want to update at the time of execution of the task sacheduled. How can I do? I use Windiws 7 Home premium.

    Hi Aurélie Rozier,.

    Click on the Start button and type "Calendar" in the search box. The option tasks planning must appear in the search list. Click (or double-click) on this option to launch scheduled tasks. When the window tasks planned opens leaves the Task Scheduler list fill out and then look to the bottom of this list for planning thye name, that you want to change. When you have found, right-click on it and choose Properties. In the Properties window, click the triggers tab and then click Edit at the bottom of the special editing window. You should be able to change the time from there.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web:http://www.winuser.co.uk;  Web: http://xphelpandsupport.mvps.org;  Web: http://vistasupport.mvps.org;  Web: http://www.silversurfer-guide.com

  • Cannot change PopUp LOV width and height in version I change the values of 450 400 in the Popup list template values (Section of the window), but my function genList0_f07_$ _row (), retains the same settings. Is this a bug?


    I use APEX to my app.

    I have a region of reports, where I display a column set. A column is the column attribute "display as" the value 'Popup LOV (LOV based query).

    I press the button to retrieve the LOV, I get a popup of 450 x 400 pixels.

    I go to the side of the model and navigate to "Popup list of values of model", where I can see in the section 'Window' attributes 'Width' and 'Height' value 450 and 400. I edit them and save them and there is nothing going on. I'm sure that the template belongs to my selected theme.

    I saw in the HTML source code that is the called function:


    function genList0_f07_$ _row)
    w = open ("wwv_flow_utilities.gen_popup_list" +)
    « ? p_filter ="+
    "& p_name = ' + escape ('f07') +.
    ' & p_element_index = ' + escape ('0') +.
    ' & p_elem_id = ' + escape ('f07_0000').
    ' & p_form_index = ' + escape ('0') +.
    ' & p_max_elements = ' + escape ("") +.
    ' & p_escape_html = ' + escape ("") +.
    ' & p_ok_to_query = ' + escape ('YES').
    ' & p_flow_id = ' + escape ('114') +.
    ' & p_page_id = ' + escape ('100201') +.
    ' & p_session_id = ' + escape ('16021544706004').
    ' & p_eval_value = ' + escape ("") +.
    ' & p_translation = ' + escape ('NO') +.
    ' & p_lov = ' +.
    ' & p_lov_checksum = ' +.
    ' & p_item_id = ' + escape('-683997768') +.
    ' & p_column_id = ' + escape ('25022622060292812'),
    "Scrollbars = 1, resizable = 1, width =400, height =450"); "
    If (w.opener is nothing)
    w.opener = auto;
    w.Focus ();

    I see that the values has not changed. I also connected and disconnected. I am inclined to believe that it is a bug of the APEX.

    The only solution I think is to replace this function, which is NOT ideal.

    Thank you


    The parameters are generated only, nothing you can do about it because it does not use the model for these properties of the couple. Other things work fine for example the names of button or title window etc. I guess that, Yes, it is a bug. It's still there in the apex 5 too, I checked. The default values of the template do not match, the value in the generated code is always 400/450. So I guess it's pretty much a wait on 5.1.

    Here's a fun hack to make it work well on your page (works in apex 5 too, because the code is always the same). Put this in the execute on loading of the page section:

      var _open = window.open;
      window.open = function(){
        if ( arguments[1] === "winLov" ) {
          arguments[2] = "Scrollbars=1,resizable=1,width=500,height=700";
        return _open.apply(window, arguments);

    Change the settings to your liking. This will replace the existing window.open call, which is what the popup lov use and replace it with our own code. It does not interfere with other things. As the name of the new window is always "winLov" for the popup lov, it is the argument that is checked.

    During the call to window.open to open a new window with the name "winLov", parameters are replaced with your own version of it. The window is called as usual, using the stored reference.


    Yes, do not use the trick of resizing. My hack can be a bit tedious, but it's much less invasive for the end user (see open, bam, resize. "Even gets funky on multiple monitors). Also, this thing in the popup lov template will affect each lov popup that you use in the application, which is much less interesting than my specific page code.


    I did a little digging in the source code, and I don't know why it does not work. Popup lovs are actually equipped to deal with it. My guess is that the parameters are recovered only after that the lists were generated, causing the package variables global to use their default values instead of model parameters.

  • Change the color of a field

    On a form, I do, it is important that if the value of say 'field1' is less than the value of 'Field2' that changes the appearance of 'field1' somehow. This is the color of the font or perhaps the background color of the field (this is to alert the person in treatment of the form).

    If someone could point me in the right direction it would be highly appreciated. I have been struggeling with this for quite some time now.


    You need to use JavaScript, something like the following as the custom field 1 calculation script:

    Get the value in the other field, a string

    var S2 = getField("t2").valueAsString;

    Get the value of this field as a string

    var s1 = event.value;

    If the two fields are not white and value of s1 is less than s2,

    set the color to red, white background

    event.target.fillColor = (s1 & s2) & (+ s1< +s2)="" color.red="" :="">

    Replace "t2" with the actual name of field2. You can also adjust the color according to your needs. To change the color of text instead, use the textColor property, or the strokeColor property to change the color of the border.

  • How can I change the style of a page?

    I've been mobile along smoothly making pages for a new Web site that all have a particular aspect in the measurement from the bottom, header and navigation bar and bar. Now, I want to make a page that is a little different but still keep a couple of old features, such as the navigation bar.
    So, I saved one of the pages with a new name and tried to change the existing CSS style (s) on this page. All my CSS styles are external style sheets. So, if I change the CSS on this new page say to the style controlling the background, the background of all the other pages of change. I know this is a newbie question, but please help-'I am puzzled. How the background on this new page change without affected the style of the old pages?
    Thanks for help. I worked on this for a long time with no success.

    the background, the background of all other pages change. >

    Use a style incorporated between theandTags for the page in
    issue. Incorporated or replace styles inline (in the HTML) external
    style sheets.

    Nancy O.
    ALT-Web Design & Publishing

Maybe you are looking for

  • Hard drive failure HP Pavilion dv6 - 6173cl

    That means more average error? At startup: SMART disk errorHard drive 1 (301) System diagnosis-> Test drive: Failure ID: PGEXNW-5RR7NW-MFH14K - 60A 003Product ID: QE029UA #ABA Hard drive 1

  • Compaq Presario CQ62 210US not: Compaq Presario CQ62 210US Notebook

    You want to set for this laptop recovery.  I wonder exactly what I copy discs, the new installation OEM, or one that is here now with added software and other.  I guess that happens since the recovery Partition and it's always the OEM factory setting

  • downgrade HP G6 2293sa to windows 7...

    I've had this machine for over a year [again]... I finally had enough. I need advice on how to downgrade from 64-bit Windows 8 [now with the 8.1 update] to Windows 7... on my HP G6 2293sa. The drivers necessary to even be available? ... Thank you...


    Ive had a lot of problems in the last month, one day part of vista to the door itself. I have renistalled it and have had major problems. After formatting the drive and to a number of relocations, ive got both acouple blue screen, read errors disc iv

  • Windows 7 64-bit. The backup failed, error 0 x 80070020

    When you perform a backup of the complete picture of my 64-bit Windows 7 machine I received an error: the backup failed.  The process cannot access the file becaue it is used by another process.  0 x 80070020