TB support only certain parts of the profile (after the upgrade)

Similar Questions

• What is a free screen recorder well let's you zoom in on certain parts of the screen?

  Free screen with Zoom recorder

  What is a free screen recorder well let's you zoom in on certain parts of the screen?

  Hello

  You may be able to search online using your search engine preferred for information on this subject.

  DISCLAIMER of THIRD PARTY SOFTWARE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Display only certain layers of the master by page

  Hello

  First of all, I'm pretty new to Adobe Indesign.

  I'm doing a kind of operating instructions, where all the pages are divided horizontally in three rows.

  each line can contain a certain part of the manual, it can be:

  • A step that people should perform
  • A warning
  • A graph
  • A table

  So I made a master page, with each of the four option all three rows in separate layers.

  I thought that I would be possible to turn on or turn off the layers individually for each new page, but it's not.

  each page will be the same.

  So is it possible to individually change the visible layers for each new page that I want to do?

  Or what I do with master pages for every layout possibility is it possible?

  See the image below for the layers I've done and two examples for the manual.

  

  

  Adobe Indesign CC 2015

  Windows Pro 10

  With the PDF preview, I couldn't do what I wanted to do.

  But I found how to get exactly wat I wanted originally:

  I've done several layouts on 3 rows on a page.

  Then I discovered on CC libraries:

  I selected the text field and the field of the image and recorded in CC libraries.

  Now I just take a page blank and choose the correct layout of the library

• Is there a way to make only a part of the timeline?

  Wel the title says it all I guess: is there a way to make only a part of the timeline?

  Yes. Place a marker and use keyboard shortcuts 'B' to set the inpoint and 'n' to define the out-point on your timeline. Good luck

• Is there a way to remove only 1 point or only certain elements of the story without deleting everything at once?

  Why the deletion of one day in the historical cache not delete everything? Is there not a way to remove only certain things while leaving everything else intact?

  You can delete specific items in the sidebar of history or in the library (history > view history).
  ---
  http://KB.mozillazine.org/Viewing_the_browsing_history_-_Firefox

• How to make duplication of text cut so it shows only a part of the underlying Word

  Hello everyone,

  I'm not really sure how to describe it, but the link is: Design a poster classic serif | Illustrator | LKD creative. I basically want to do this. I tried following the instructions, but it seems that its missing instructions. Is it possible to create in Illustrator CS5? Any information would be appreciated. Thank you.

  bossladyleo,

  You can:

  (1) create any Type in position, with overlaps;

  (2) type > Create outlines, at least for the parts that overlap other parts (in some cases, you can keep everything live Type, but not in the case shown because of the shapes of letters and the mutual overlapping (for example, as of the jumps/Over);)

  (3) select each set of letters to overlap other and oppose > compound path > make;

  (4) object > path > offset from the desired gap round forms of the letter;

  (5) select the compound path which is offset and changes color to white, now you should have at least a partial coverage of the letters below.

  (6) object > compound path > exit, then select Direct and remove the counter paths (the one who did the counters/holes in the letters), now you should have one in addition to covering the letters below.

  (7) to get rid of any bit and remaining pieces, you can change the shape of the paths of offset in cutting, removal of parts to support (for example the parts between the serifs) and the displacement of the anchor (to the outside).

  If you want the result on a colored background, you can:

  (8) select the coverage group to the top of letters and the underlying and the transparency palette flyout click do the with unchecked Clip opacity mask and invert the mask ticked.

• I want to know how to crop a letter in a clipping mask, so that certain parts of the letter are cut out of the bounding box

  letter in the bounding box of culture?

  I have a box of 15 x 15 cm. I have my only inside typed letter.
  I want to clip the letter to the limits of the box so that if I change its scale, part of the letter is cropped to where are the limits of the area.

  I must do this for an assignment.

  Thank you!

  And the R is black or another color?

  The letter must be below the box. Use the layers panel to make sure the letter is below the box. Select both, menu items, clipping, Make.

  If this does not work for you, please post a screenshot showing the Panel layers with extended layers of screen.

• is it possible to only 1 part of the bolded text?

  As the title suggests I can everything do a part of the "BOLD" text but not all this?

  Example:

  May 2009: XXXX of product line that comes out.

  cause when I just highlight the part of May 2009 and try to "BOLD" it change all the text inside the div.

  In code view, place tags around the text you want to bold:

  May 2009: XXXX of product line that comes out.

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• IPhoto 9.6.1 certainly disappears, when the upgrade to Yosemite 10.10.5 at ElCapitan?

  All entries in the Forum only explain what to do, if iPhoto was not the last version and was endangered because of it and how to get it back to Apple.

  I could not find, what happens during the upgrade process and if iPhoto 9.6.1 is running on Yosemite.

  I certainly need to reinstall with everything what tricks?

  And if I have to reinstall, why can't not with Time Machine?

  Please help, thanks!

  I have iPhoto 9.6.1. There was no need for reassembly of it on each update of Yosemite through El Capitan 10.11.5 10.10.1.

• Writing only to certain parts of the cluster in an array by reference

  Hello

  I have an array of clusters that I use as well to view and enter data, i.e. elements of the cluster are unmodifiable (disabled) controls used as indicators of "false" (numeric values, strings, LEDs) and some are normal witnesses (numerical values, buttons).

  The "indicator" part of this cluster table must be constantly updated (for example with the positions of the engines), normally by replacing the elements according to cluster in a loop and writing in the table. This can lead to conditions of race with the part 'control': If the user enters data in a 'bad' timing control, it gets immediately replaced by the old value - in this case the update process began just before the user input and completed just after the entrance of (which may be a simple click is enough) , so the old values of controls are rewritten on user controls, as the table should be rewritten as a whole.

  Now, I'm looking for a solution to this critical race condition without changing this 'mixed' approach of control/indicator (e.g. by control and indicator tables separated next to each other and paired scrolling or so - which would make it much more horrible GUI design, among other disadvantages). I know that it is possible to change the value of an element in the cluster without having to rewrite the entire cluster using the element reference. However, it's more complicated if you have an array of clusters, because you want the cluster to a certain index table and to my knowledge, there is no such property that gives you for example the reference to the item table located in an index of certain (who is a lack of long date in the table of Labview manipulation). If you change the 'value' of an element of the cluster property in a table, it seems to affect the 'last active' element of the array, at least it is correlated with the array element that was clicked on last. Maybe there's a way somehow programmatically set that ' last active ' array element and browse the table in this way (setting the flag "correspondent" elements of the cluster by reference) or maybe someone knows a solution 'Nice' and elegant?

  I hope you understand what I mean

  Thanks in advance!

  To avoid such conditions of race, make sure what you write on the Board in the same place change you and write only the data for the indicators. Practically, this means that if you have an event for the control change value, you must have another case of event in the same structure of update of the indicators (timeout or a user event) and make sure that the indicator event takes the rest of the data of the current value (for example through a terminal or a local variable or the DVR suggested Steve). Similarly, you can use the terminal control to the current value of the control for the indicators rather than depend on the event containing the correct value.

• Point-Style grid will not appear when zoomed in and only on certain parts of the image...

  .. other grid Styles work fine. The grid of points indicates also, outside the canvas. Someone at - he had the same problems?

  TIA

  SEB

  

  That seems to have been a problem with the last several versions of photoshop.

  Disabling open gl (graphics processor use) will make the grid points poster correctly, but at the expense of no open gl works as 3d.

  This could be a thing of amd vs nvidia where one brand of graphics card is not make the grid points in this way, but the fact of the other mark.

• Set different font sizes for certain parts of the text layer?

  I am a novice as AE is going, but I'm working on a script to dynamically change a project.

  The project in question has a text layer has a single string, but with variable font size (the text is a price, where the hundred part is a smaller font to the different initial values).   I want to use a script to change this text, but it is enough to assign a new text document does not retain the variable formatting - all figures are found with the same font size.

  Since the guide of the script, I see that the size of the font of a text document object is available, but only in a very limited form - definition of value he sets for the entire document, without options to set for a range of characters.  I would be fair to assume that programmatically create/update a document with several sizes of fonts is not possible?

  If this is the case, what would be my best options to achieve the same effect?  If the project is modified to have several layers/documents, is there a way to adjust the positioning to maintain good spacing/kerning between independent channels?  (I'm also a dollar with yet another sign size of police prior to the price, so I would have actually three pieces of text to position in my script and just to the right/left cannot justify two strings).

  Thanks for the tips!

  AFAIK, there isn't a convenient way for a script to maintain several font sizes once it changes a text document.

  You can however, use sourceRectAtTime() to get the actual span of text in a text layer, positioning and three text layers to get the desired spacing is not difficult.

  Dan

• Highlighting of certain parts of the Web page for printing

  I have a problem highlighting items to save to a file for printing of Web pages (specifically the text). If I pressed the left mouse button to highlight the text, the page is not auto scroll where the text is off the screen. An example is here:
  http://sonalacant.blogspot.com/search/label/agenda

  Ideas please, because it means I have to go back to IE for certain pages?

  Click on the first letter of the syntax you want to save (you will see nothing appear on the screen), then scroll down to the last letter of the sentence or paragraph, hold the SHIFT key and click on it. This will highlight everything between the two. Then CTRL + C to copy.

  Works in any browser or document.

• Why do I only a part of the graph of the wave even if I added the whole wave using the shift register?

  It seems only to read 200 samples and then stop. Shouldn't get a chart to continuous wave after using the shift over a time register loop?

  You must remove VI begin to break out of the loop...
  You can not 'start' a task that is already running...

  You also remove the VI start completely from your code... If you do not use start VI, a measurement task starts automatically when executing the DAQmx reading VI.

  

  Find the attached VI.

• How can I display only a part of the scale in the waveform graph

  This is the first time I try to use the waveform graph, since now, I used the table of waveform.
  The reason why I moved to the chart, it's that I need cursors.

  I have 2 problem

  the first: in the diagram, the graph moves when I add a new data and the scale of the x-axis stay the same size, in the right size I always saw the new data. How can I do that with waveform graph?

  Second: How do I say Labview to the day I click on the graph, I need that because when move graphic I lose the day, and to make I need to zoom out, I drag the imprecateurs.

  All this must be done programmatically. The LabVIEW graphic accepts tabular data, not only as the table and the graph doesn't have the ability to retain the previous points, like the story of a graph. You will need to retain previous values and then continually update the graph with the old and new values to get a shift register "chart as behavior. Cursors should be written programmatically re of each iteration, since you rewrite the entire graph.