TB31 freezes when I start addressing

I'm tired of guests to update and updated TB31 17. Under XPpro SP3. Now, when I start typing the first letter in the TO: address field, TB freezes for 1-2 minutes. I'm stuck on the first letter I type each time. If I reboot, this clears the problem for a short time, but it starts again after a few emails. So it's your time, I use Gmail for my outgoing email. Help!

The real bug fix is here. I don't understand half of these things, but your welcome. https://Bugzilla.Mozilla.org/show_bug.cgi?id=984875

Discussion on the real impact is here https://bugzilla.mozilla.org/show_bug.cgi?id=1048316

Tags: Thunderbird

Similar Questions

  • My Sansa e260 seems to freeze when I start. Help, please?

    Hello

    For the last two days, my Sansa e260 refused to start completely. It starts, goes to the black screen that sansa logo and then freezes. I took out the battery and turned it works a couple of times. I even let the batteries run out and reload it later to see if that would help. (he didn't)

    I really don't want to have to buy a new mp3 player. If anyone can help... Thank you. : )

    You may have a bad file that confuses the firmware as it tries to start.

    Can connect you to your computer? (Preferably in MSC mode.)

    Try to run the error as explained in this FAQ checking.

    http://forums.SanDisk.com/Sansa/board/message?board.ID=announcements&message.ID=147&jump=true#M147

    If this does not work, you will have to Format and delete all of your files. (If you can connect, make copies first - but when you reload, reload only a little at a time if you don't put a bad once again.)

    If you can establish a connection to MSC, right click on the drive of the unit (X (any letter): Sansa E200) and choose the Format to FAT32.

    Or use the sansa.fmt here:

    http://forums.SanDisk.com/Sansa/board/message?board.ID=E200&thread.ID=913

  • My computer freezes when I start reading CrossFire!

    Dear Sir/Madam
    Can you please recommend an anti freeze program or tell me what to do to stop my game freeze?
    Yours sincerely

    Hi ZakB

    The game may freeze because you might be running out of disk space hard od or RAM installed on your computer is not enough to play the game. Try to increase the RAM of your computer.

    You can use the new feature in Windows Vista "ReadyBoost" to improve the performance of your computer, which therefore will allow you to play the game without freezing.

    For online games, you can try to install the latest version of the flash player
    http://get.Adobe.com/flashplayer/

    ==========================================================================================================================

    Windows ReadyBoost can use storage space on some devices of removable media, such as USB flash drives, speed up your computer. When you insert a device with this capability, the AutoPlay dialog box will offer you the option to speed up your system using Windows ReadyBoost. If you select this option, you can then choose how much memory to use for this purpose. However, there are some situations where you will not be able to use all of the memory on your storage device to speed up your computer.

    Some bus universal series (USB) storage devices contain both slow and fast flash memory, and Windows can only use fast flash memory to speed up your computer. So if your device contains slow and fast memory, remember that you can only use the fast memory portion for this purpose.

    The amount of memory to use for ReadyBoost acceleration recommended is one to three times the amount of RAM (RAM) installed on your computer. For example, if your computer has 512 megabytes (MB) of RAM and you plug in a 4 gigabyte (GB) USB flash drive, setting aside from 512 MB to 1.5 GB of that drive will offer the best performance gain.

    http://www.Microsoft.com/Windows/Windows-Vista/features/ReadyBoost.aspx
    ===========================================================================================================================

    Abdelouahab

  • RoboHelp freezes when I start my project

    Hello
    I'm testing RH7 to determine if I'll update. Although I could open my project initially, RoboHelp often frozen, but now it will not even open my project. When I try RoboHelp hesitates for a few minutes and then reports that "RoboHelp Explorer is unable to start Microsoft Word". This happens even if Word is already running. I am able to open the project example of HR, and when I do, I noticed that a RoboHelp menu item is displayed in Word that does not appear when RoboHelp opens Word to open my project. I'm stuck. I tried the repair installation process in the dialog box uninstall, but that made no difference. Can someone advise?

    Hi Peter,.
    Thank you for your help. Changing the security setting has not changed behavior, but I think I solved the problem with a response from Brian on this forum who sent me looking in the right direction when he gave me a clue on a VB type mismatch error that I was getting too. I found the solution in the Word startup folder where deleting some models apparently corrupt or delete the normal.dot template (or both) seemed to have solved the problems, at least temporarily. I see no longer gel HR or model detach or macro or VB errors.

  • Windows media player crashes when you start cd play

    When I insert a CD in windows media player, screen freezes when cd starts playing and the sound is chopy.

    Hi RonnieDean,

    1. Did you the latest changes on the computer?
    2. Are you experiencing a similar problem with a CD you are trying to play using Windows media player?
    3. You have security software installed on the computer?

    Method 1

    See the link below and run the fixit tool available, check if it helps.

    Solve the problems of Windows Media Player video and other media or library

    http://support.Microsoft.com/mats/windows_media_player_diagnostic/

    Method 2

    If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
    4. When you are prompted, click restart to restart the computer.
  • major problem on this laptop lenovo most of users experience lock when windows starts

    I BOUGHT THIS computer PORTABLE OF BEST BUY in January 2012 I BEGAN to HAVE the PROBLEMS WITH HIM.  Finally after blocking up to 5 or 6 times during the first months of couple finally just locked up and no matter how many times I rebooted, tap, it took off the battery voltage I couldn't get windows to load.upon goes to best buy, of course, they informed me, I had 19 different virus, spyware, malware or adware on my pc.since I had not loaded programs and software here and I do not open unsoliciated e-mail and I had PC for 15 years and never had a problem, I was very skeptical. I told them no, I didn't spend $200.00 for them to fix and remove the problem that was to have my old pc of 3 months. I went back picked it up and they said well we have windows to start up, but does not remove the virus, well after returning home and running analysis trend micro system with microsoft security essentials and CC Cleaner full nothing was found on my system. I only got lock up once on me over the last 4 weeks Ive got back, but when I went on the best shopping site I noticed that most of the people who gave user reviews and booought this portable paticular all have something in common pc freezes when windows start right at the point where the screen is about to go to windows and he said wait a moment before it switches on your office. Please if anyone knows why or what's going on with this portable paticular or can give some help or suggestions, it would be greatly appreciated. Ive owned offices for 15 years and never had a problem this is my first laptop and I just spent 600 for it and want it to run properly. 12/11/15 IS A LENOVO V570 MAKING DAT IS IT im assuming that it is December 15, 2011

    Do you have the drivers updated through windows update? If so bad move, all drivers must come from Lenovo.

    CCleaner is not an AV or malware analysis tool, I hope that you do not use the registry tool.

    Run the free http://www.malwarebytes.org/products/malwarebytes_free

    If the blockages are spasmodic, his v.hard to diagnose, unles perhaps, happens when you do something specific.

    If the blockades persist, and you have not installed the material or questionable programs, call Lenovo support line

  • Can I save to file or print the global contacts in Thunderbird. Not only the contacts but all contacts that indicate when you start to fill out an address to send to.

    There must be a file somewhere in Thunderbird for all of your communications by e-mail that stores the e-mail addresses of everyone. When you start typing an address you will display a list of people with whom you communicated with in the past. Many of these people are not in your contact/address file. I want to somehow extract this file to Thunderbird.

    You have two default address books. The personal book where you add contacts and the collected book which keeps information for messages that you send.
    So you're looking for the collected address book.
    When you open the address book window, you should have your books listed as folders on the left margin in the directory pane. If the pane is not displayed, select View-Layout and click on.

  • no suggested email address pop up when I start to write in the box "to".

    I'm on Thunderbird 29,0 - had upgraded to a beta version, not intentionally.

    Now, when I start typing in an address when you write an email names pop up, even if the initial letters refer clearly to an address or a name in my address book. Each email address must be typed from scratch. only the red letters appear. Problem.

    If you want to upgrade to the current version of Thunderbird, it can be found here:

  • When to start a new download freeze Download Manager browser upward at two minutes

    When to start a new download of the freezing of the browser a few minutes Download Manager.

    Thank you. It was a problem specific to my computer. Other software by causing this problem.

  • When you try to open a link in my email, my iphone 6 freezes. It started recently... helpppp!

    When you try to open a link in my email, my iphone 6 freezes. It started recently... helpppp!

    I know it says at the bottom of your post you have 9.3.1 but check the settings > general > topic and see what iOS, you're on.

    9.3.1 solves this exact problem

  • Equium A200-1V0: charger plugged freezes when starting laptop

    Hello
    My satellite developed a strange absence of the module.

    When the laptop is connected to the charger it does not start. LEDs light up, keyboard blinks once and the screen is bright, but it is completely empty (no Toshiba logo, no bios, nothing).

    There is however no problem when I start the system on battery (charger unplagged). If I plug the charger at any time during the startup of the system it freezes immediately. It does not strike, the mouse pointer does not move and the blue lights are solid. However the battery LED turns orange. I get the answer only to keep the power button down for 4 seconds - how well be able to disable.

    When I restart the laptop on the battery then only Vista starts without problems.

    Does anyone have an idea, what could cause this problem, switch power supply, motherboard, charger? Is there an easy fix for this?

    Could you please say how Toshiba deposit would charge to fix it?

    Thank you very much
    ARIC

    Hi arek_1,

    Are you using the original Toshiba AC/DC adapter or is it a 3rd party charger?
    Can you charge the battery while the laptop is turned off?

    It is certainly a hardware malfunction, but either it s caused by AC/DC adapter itself or mainboard (load control).

    I put t know how much it cost to fix this problem, but just ask an authorized service provider. Guys you can make an offer how much it cost, and they must determine the laptop before determining what part needs to be replaced. ;)

  • How can I remove the desired or invalid email addresses in automatic drop-down list when I start typing an e-mail address in Outlook?

    How can I remove the desired or invalid email addresses in automatic drop-down list that appears when I start typing an e-mail address in a new message (Outlook)?

    If you wish, you can also stop Outlook of suggesting e-mail addresses as you type.

    Tools > Options.
    Tab "Preferences".
    Click e-mail Options.
    Click Advanced e-mail Options.
    Do not forget to uncheck "suggest names while completing to, Cc, and BCC fields."
    And OK your way out.

  • Obtaining an e-mail address to get in the box when I start typing a name

    Please can someone tell me what I need to do in order to get an email to arrive in the box when I start typing the name. Is there a box somewhere that needs ticking or something in order to activate the automatic process?

    In Windows Mail, press ALT + T , click Options > send and put a tick in the box of Auto-complete when composing e-mail addresses . Boulder computer Maven
    Most Microsoft Valuable Professional

  • Deleting hotmail contacts - why drop still appear when I start typing in an address?

    I know how to remove a contact from hotmail from my list and was recently when a friend changed her e-mail address. Then, I created a new contact for her.

    However, when I start to type the name of the drop-down list box that appears includes also the old address and details that I already deleted the list of contacts.

    How can I get rid of the old details from this drop-down list?

    According to the Windows Live team, there is currently no way to remove items from the list recently used in Hotmail.  It is a problem that Microsoft is aware of, but as the yet has no solution.  Here is a link to the discussion on the Windows Live Solution Center: http://windowslivehelp.com/thread.aspx?threadid=aaa56055-ec6d-482e-b5a4-76d766d56048&page=1.

    Barbara

  • When I start qq window opens and it freezes

    When I start qq opens the paine I click on an object and all freezes what can I do to fix this

    Hello
     
    What exactly is the problem you are having? Please provide the details of the error, or symptoms. This helps help you the better.
     
    Please use the below mentioned link to ask for Suggestions on Help Forums.
     
    Kind regards.

Maybe you are looking for

  • skypename

    If I had to get the tech ppl to remove my skypename someone else would be able to use the name of tht?

  • Z570: Plugged in but not charging status message

    Hello I recently had a computer laptop z570. I get status above message "trendy but no charging current. What is the reason for this? What is an adapter or battery problem or one other change of parameter to enable this I tried the 'Balanced' & 'High

  • Slider w/flashing black screen VPCEA46FM

    The laptop is only 2 months and today on startup, I get a black screen with a blinking cursor. I tried twice recover VAIO care rescue and nothing. I tried to remove the RAM one at the time and substitute them and nothing still a black screen with cur

  • The officejet pro 8600 utility + & Mavericks

    HelloI have an officejet pro 8600 printer + and I want to install a utility with the Mavericks. I found nothing so far. Could you help me please?Thank you in advance.Kind regards.

  • External GUI manipulation

    Hi guys.  I'm faily new to LabView, and I have to manipulate a GUI that has been created using Auto-it.  The GUI itself is automation software, but requires the data entry, and clicks.  Apart from that, users also want to be able to edit the graphic