TC - 705 crashed. does not start. error message

Similar Questions

• Please help: Windows XP does not start error message: STOP: 0 x 00000024

  Original title: Please help: Windows XP does not start.

  Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

  If this is the message you get, then you have multiple problems...

  1, xp should be on the C: drive, not F:

  Default C: is for the OS only. With xp on drive F: and you use only a hd

  then the hd must be formatted and all partitions deletion (unless there is a relocation

  the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

  be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

  for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

  Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

  Read kb307654 or kb314058

• Windows XP does not start error message "Windows Boot failure. Press 'OK' to repair the startup failure.

  I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(

  I think that the difficulty with myantispyware site is to know what type of malicious software that you have?

  I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.

  On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.

  I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.

  Superantispy-portable    < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">

• Firefox does not start "XPCOM" message pop up, my user and passwords! ??

  My window 7 was not starting up properly so I did a system restore and now firefox does not start a message appears indicating "XPCOM" and I googled and all is said to reinstall Firefox. I don't usually to reinstall immediately because I need my passwords and username back. I can't find a solution on the forums, or if there is I have not found or I simply did not understand the solution itself. Please get back to me as soon as possible

  Thank you!

  Is a restoration of the system to a cancellation of the recent updates or something more radical?

  You can do the following type of reinstall without touching your settings files. Important: uninstall NO Firefox first. That is not necessary.

  Clean reinstall it

  (1) download a fresh Installer for Firefox 36 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) the release of Firefox.

  (3) to rename the program folder

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  When you start Firefox, you may need to use the Profile Manager to return to your regular profile. Ignore: copy/paste glitch.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• After Effects does not open error message citing "mount point list is empty.

  After Effects does not open error message citing "mount point list is empty.

  FAQ: Should what information I provide when you ask a question on this forum?

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• HP G72 laptop: HP G72 laptop does not start, error code of disk hard when you use HP Diagnostics

  I have a laptop G72 and it will start, but Windows 7 does not start. On using diagnostic tools in the start menu, my hard drive and my departure fail their tests, with both giving me this error code:

  UCUFWF-56C81D-XD003G-60WF03
  

  No idea what this means? Help is appreciated.

  Hello

  You are welcome

  Your computer is listed as coming with a 320 GB hard drive, but you can also easily install a 500 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, see if you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K

• StarTech ec1pecps parallel adapter does not start, error 10

  I'm having trouble installing a parallel adapter from Startech ec1pecps on my laptop Dell inspiron 9400 running XP. I tried new drivers and the advice of the other forums, but the device driver says: "device cannot start error 10.» I received no response from Startech on it. Can anyone help?

  Hi GregSwinburne,

  ·         Have you tried to connect the unit to a different computer and check?

  The Code 10 error code is generated when the Device Manager has not enough information or the error that is upward by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  For more information, see the article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  You can also run the troubleshooter and check if it works.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Let us know if that helps.

• Windows media Center and games does not work, and does not work error message d3d8thk.dll

  my media library does not work and message d3d8thk.dll isn't continuous work to come.  How should I do?

  D3d8.dll error message could apply to any program that uses Microsoft DirectX, most video games.  I suggest following the steps below to solve the problem.

  1 restart your computer if you have not yet.

  D3d8.dll error could be a stroke of luck and a simple restart could clear up completely.

  2. install the latest version of Microsoft DirectX.  Chances are, the upgrade to the latest version of DirectX will fix the d3d8.dll not found error.

  Note: Microsoft frequently publishes updates of DirectX without updating the version number or letter, so don't forget to install the latest version even if your version is technically identical.

  Note: The latest version of DirectX should be installed no matter if you are running Windows 7, Windows Vista or Windows XP.  Installation can include DirectX9 and DirectX10 files but they run side-by-side without problem on all these operating systems.

  3. assuming that the latest version of Microsoft DirectX does not correct the error of d3d8.dll you receive, search for an installer of DirectX on your game or application CD or DVD.  Usually, if a game or other program uses DirectX, software developers includes a copy of DirectX on the installation disc.

  Sometimes, but not often, the DirectX version, included on the disc is a better fit for the program than the last version available online.

  4 uninstall the game or software program and then reinstall it again.  Something could have happened to the files in the program work with d3d8.dll and a reinstall might do the trick.

  5. restore the file d3d8.dll since the latest DirectX software package.  If the troubleshooting steps above have not worked to resolve your error d3d8.dll, try to extract the d3d8.dll individually from the downloadable package of DirectX.

  I hope the information is useful.

  Kind regards

• Need help: Reader does not start, the message error "attempt to access an address not valid."

  My previous installation of the drive (Windows 7, 32 bit) worked without any problems.  Until a few days ago when I updated to the latest CD player.  Installation worked fine, but when you try to start the CD player, I received the following error message: "attempt to access an address not valid."  I uninstalled CD and installed Player 11.0.  Yet once, installation worked fine, but I get the same error message, even if double click directly the Adobe Reader .exe file.

  A similar question was asked in December 2014, but I do not see a resolution.

  Without Adobe Reader, many applications simply do not work.  Any help would be appreciated.

  

  Thank you, Christopher, but this thread did not provide the right answer to my situation.  However, I continued working on my problem and finally found the solution: it's software Msreader EMET let go.  This software is an absolute disaster.  This is a free Microsoft security software. It's great, but once installed on your system, you cannot uninstall it even more.  After an EMET update a few months ago, I could not start Microsoft Word program.  After hours of play and even communicate with their support (not), I finally understood that he was own EMET software Microsoft blocks the Word Microsoft to start program.  Apparently, these guys don't know what they are doing.

  Anyway, I was ready to uninstall and reinstall the drive again, this time using the cleaner of Adobe's Acrobat Reader software to remove all possible traces of before install.  Before I did that, I remembered the EMET disaster a few months opened EMET, unmarked all actions AcroRd32.exe, and voila, launched reader and let me not open PDF files. (I had to reboot my PC before that worked).  Player is then proposed to upgrade to the latest version.  I did, and big surprise, Reader produces the same error message after the update.  Heck!  But after another reboot, the drive launched without any problem (apparently, EMET for the additional restart to recognize the changes after the update).

  I lost the greater part of the day to work on this issue, but I'm a happy camper again, because my Acrobat Reader works again.  Maybe my experience will help someone else.

• Windows 7 does not start error 0x0000007F

  Salvation;

  I was using Windows 7 ultimate and updated to 10. But 10 crashed often and was not compatible with my printer (does anything that might solve the problem). Finally, I decided to go back to 7 and chose to return to the previous version. He said "Reboot" and took more than 6 hours, and finally began to show Windows 7 from. But it cannot start. I tried to fix w-7 DVD, always impossible.

  When it starts, it displays me 0x0000007F error code...

  any help! Thank you

  Hello Misganu,

  I would like to know some information about the problem so that we can help you better.

  1. What is the full error message when you say: "0x0000007F error code?
  2. What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience you encounter error 0x0000007F . I will definitely help you.

  UNEXPECTED_KERNEL_MODE_TRAP bug control has a value of 0x0000007F. This bug check indicates that the Intel CPU generated a trap and the kernel could not catch this trap.

  Bug check 0x7F typically occurs after the installation of a faulty or incompatible hardware (including memory) or if installed hardware fails.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Bug Check 0x7F: UNEXPECTED_KERNEL_MODE_TRAP
  https://msdn.Microsoft.com/en-us/library/ff559244 (v = VS. 85) .aspx

  Important notes:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Laptop does not start: error BCD on Acer Aspire M3-581

  Hello

  Acer Aspire M3 581PTG my son has stopped booting.  At the start, immediately after the Acer logo, it now shows a blue screen with the message:

  Recovery

  Certain required information does not appear in the data of Configuration startup file. File: \BCD Error code: 0xc000000d

  He then refers to using the tools of recovery and the media, but we cannot locate Acer recovery disks and do not remember if the laptop came with everything.  I started by using a normal 8.1 Windows installation CD and tried to use different repair options, but nothing worked (perhaps because Acer has a SSD and HDD so need a specialized repair utility?).

  We contacted Acer but just received a generic response to do a factory reset.  If anyone has encountered this error or is able to offer a solution?

  Thank you.

  Try this:

  http://itsolutionsblog.NET/solution-to-your-PC-needs-to-be-repaired/

  If you still have problems starting, I suspect a hardware failure at this point, maybe the SSD or HARD disk.

  Contact your regional Acer support service.

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: &#60; root windows &#62; \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• No sound (audio service does not start, error 1079)

  I have no sound on my laptop.when I have troubleshooted the program that is to show that audio service does not work when I tried to start the audio service is not starting and showing an ERROR: 1079.

  I tried several times but it's showing the same...
  is there a solution for this problem?

  Hello

  Did you change your computer?

  This error code 1079, pop when you try to start the audio service?

  Method 1:

  (a) click Start, type services.msc and press ENTER.

  (b) double-click the "Windows Audio" service

  (c) click on the tab to open a session.

  (d) click Local System account, and then click OK.

  (e) right click on the "Windows Audio" service and then click Start.

  (f) follow the same steps for the service "Windows Audio Endpoint Builder.

  (g) check if the problem persists.

  I suggest you follow the link and check.

  Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

  http://support.Microsoft.com/kb/2478117

  Method 2:

  I suggest to uninstall the sound card in Device Manager and then reinstall it.

  Follow these steps:
  1. click on start and then type devmgmt.msc in the start search box and press on enter.
  2. from the list of devices, expand sound, video and game controllers.
  3. right click on the sound card, and then click on uninstall.
  4 restart the computer.

  After restarting the computer, sound card get installed automatically. Update the drivers manually for your sound card.

  Make sure that you have installed the Windows

  Method 3:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Print spooler does not start error 1053

  I have Windows 7 64 bit and the printer has always worked fine until a week ago.  I now have a pop-up message that says "I need to select a printer.  And if I need to install a printer, click Add printer, or find... ».  I click on the printer to find and it is empty.

  I searched the forum for Microsoft and tried the following solutions:

  -I went to Services, checked to see if the CPP is automatic and works.  This is the case.  Then I checked Spoolvs and it is also automatic but not running.  I click on 'Start', but I get an error message 1053 "service did not demand launch or timely control.

  -Command prompt to check all corrupted files.  The results are all ok.

  -Network > the sharing advanced setting > under home or work > under homegroup connections, I ticked the box "user accounts and passwords.  then restart.  The printer has worked for only 2 tests.

  -Leva 'Windows Update' and nothing is needed.

  -A ran a virus scan and everything is fine.

  -Wanted "Event Viewer" > error > Printing Service, the results only with error 2114 «print spooler could not share Canon ink jet with the name of the shared resource in ink jet Canon...» ».

  Hello

  It is not irreparable, but it takes a bit of knowledge. Try the methods that to
  once. As I said seek help from a family member, a friend or a real computer store.

  If you start up and down if you think you can perform these tasks
  even if you don't understand them.

  Make a Restore Point before you start, you can return to where you were like that
  If necessary. (Although to be honest, a serious mistake made by those who is unlikely even if you)
  make a mistake).

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">