TC - clear picture fault diagnosis?

Similar Questions

• Develop a clear picture becomes slightly blurry in the library. Help, please.

  When I move to develop the library, my retouched picture becomes slightly blurry. It's a perfectly clear picture developing, but when I go to the library and export while it is a JPEG, it is out of focus. I reinstalled Lightroom but still has this problem. Any advice?

  Hi kellyo,

  Please check the discussion below.

  Develop module & library module are not matching

  Fuzzy soft/for viewing in the library but strong images in develop mode? -Lightroom Forums

  It will be useful.

  Kind regards

  ~ Mohit

• My screen has become foggy and I can't get a clear picture. What should I do?

  I had my computer on my yahoo and when I was going to check my email, my screen become foggy and I cannot now get a clear screen. What should you do to get my clear screen again?

  Hello

  1. what browser do you use?
  2 are there any changes to the computer, such as the new hardware or installed software or updates applied?
  3. What is the brand and model of the computer you're using?
   
  See the following:
   
  Method 1: I suggest to try to change the resolution of the screen and check if it helps. Please visit the link mentioned below on how to change the screen resolution.

  Change your screen resolution
  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Make the text on the screen larger or smaller
  http://Windows.Microsoft.com/en-us/Windows7/make-the-text-on-your-screen-larger-or-smaller

   
  Change Windows fonts
  http://Windows.Microsoft.com/en-us/Windows7/change-Windows-fonts
  
   
  Method 2: Try to reduce the hardware acceleration and check if it helps. Please follow the steps below:

  1 open the Screen Resolution by clicking on the Start button, click Control Panel, and then under appearance and personalization, click adjust screen resolution.
  2. click on Advanced settings.
  3. click on the Troubleshooting tab, and then click on change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  4. move the slider full hardware acceleration.

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-basic-problems-with-DirectX

   
   
   
  Method 3:

  Try to update the graphics card drivers and check:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4:

  Uninstall and reinstall the graphics driver and check

  Try these steps and check the result.
   
  Step 1: Uninstall the current video card driver.
  1. click on start, type devmgmt.msc and press to enter.
  2. from the list of objects, expand display adapters.
  3. right click the sub element and click on uninstall.
  4 restart the computer for changes to take effect.
   
  Step 2:
  Try to download the current driver from the Web site of manufacturers or graphics card manufacturers site and check.
  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  
   
  I hope this information helps. Please get back to us if you have any other questions on this subject.

• Not clear picture... HEELLLLLPPPP!

  Hi, my toshiba satellite comes to change to an unclear image, not too much but enough to hurt my eyes. He was running REALLY slowly before then I uninstalled a few programs that I thought that I didn't and I think I uninstalled something I wasn't supposed to. Ooops! That's happened? I am so frustrated I could cry... It is not the resolution and I changed it to 32 bit and I have no idea on clear type that confuses me and does not seem to do anything. Help, please!

  Hello

  Maybe you have uninstalled the drivers of your graphics? You should be able to restore via download on the Toshiba site. If you need other assistance please provide the exact model of your satellite number.

  Tricky

• Exporting RAW to JPEG results in a clearer picture (since LR6)

  Hi, I recently upgraded to LR6 and found that my JPEG pictures appear much lighter than their original RAW files.

  Any ideas?

  You probably accidentally set a default value for jpeg files or you 'Apply adjustments to your self' turned on in preferences-> Presets. You might want to try to reach the "default reset all development parameters" button in this same panel of preferences and to make sure that you do not have the automatic tone on.

• How can I get a clear picture after the use of the pipette?

  I found how to use the pipette, but after you apply the effect, my background is grainy and snowy. How can I get it clear?

  Here's another good is a little more to the point.

  Thank you
  Kevin

• Transitional and clear picture reset event

  Hello
  
  Sometimes, we create the transient table so that the data stored in RAM, and the attached event is "Claire on Reset."
  
  That is why I would ask why we need CLEAR ON RESET event attached to the transient data? Because on the reset of the card, things on the RAM will be automatically deleted. It seems redundant to have the LIGHT ON RESET event.
  
  Could you specify using the event CLEAR ON RESET in this case?
  
  Thank you
  
  Mike

  He is there to differentiate clearly on the cmdlet to clear and reset of the card. If you did not have a flag, they would all be clear about reset.

  See you soon,.
  Shane

• How to get the best possible, clear picture for our Web site

  Hello, I have a number of printed circuit boards to put on our Web site and I have decrease in size and the photos never seem that great. I use the Save to the web parameter in PS, but I was wondering if there was maybe I should customize when I'm there to increase clearity.  This is what it looks like when I shrink in size. Geeeez...  Any information would be helpful.

  Thank you

  T

  

  It seems that you save as a GIF. Instead, use JPG or PNG.

  And how did you resize? The edges look fairly irregular, but that might be in GIF format.

• Fault clearing UCS Manager on linking rising unused C-series adapter

  I have a number of C240M3 servers in an infrastructure of the UCS.  They have all two adapters VIC 1225 and when they were connected to the start, technicians accidentally connected the second card on some of them to the aircraft.  For now at least, we want to only first used adapters (two ports - one for each FEX).  However, as map 2 was connected at a given time, UCS Manager will not stop giving these flaws:

  F0206 - adapter 5/2 is inaccessible

  F0209 - link interface rising adapter 5/2/1 the link status: unavailable

  There is not a way to erase the mistakes without this second reconnecting.  Re-recognition of the server has not helped and I'm not sure I want to try their decommissioning and then get them to appear in the UCS.

  Does anyone know how to clear these faults manually?

  Open a TAC case and get TAC watch mistakes, then we can try to delete them, if they are real error messages.

  -Kenny

• RT: fault 9512 module when you use the hybrid mode

  Hello, I have a problem with my configuration of hyrbid cRIO. I am currently using Labview 2010, cRIO-9074, x 1 NI 9234, and NI 9512 3 x.

  Summary:

  What you trying to accomplish?

  -J' built two screws, one who acquires the data of a NI 9234. This vi is one that uses the FPGA due to 51.2 kHz sampling frequency needs. The other is to playback motion and three NI 9512 s (scan mode) encoder. Both work fine separately (on the same FPGA bitfile), but when I copy and paste the VI for the NI 9234 in VI for the 3 9512 x s and click Run, the fault of motors.

  What are the steps needed to reproduce the problems?
  Click on execute in the joint (prepared program_2VItesting.vi).

  What measures, if any, you have taken to solve all the problems and the results of your attempts
  -J' have confirmed that if I turn the two screws separately, they work fine. The first time I combine work 9512 s for a second (i.e. the engines a bit) on the two screws. Then he cracks. I then used the distribution manager to clear the fault and run it again (note: there is no error code, I just erase the Red led on the module by changing the configuration mode and active mode). Every time the first time the engines do not move at all.

  -J' have confirmed that I have properly configure this kB from hybrid mode:
  http://digital.NI.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690

  I have attached the vi of two combined screw (prepare program_2VITesting.vi) together. Half upper is program FPGA copied and pasted (as noted by the reference open VI) and the bottom is the scan mode (as noted by the timed loop). I've also attached the separate screw (program prepared and JustDAQ) that can also work well now by pressing justing run.

  Am I missing something simple here right?

  Thank you

  Troy

  So it turns out that you just put the cRIO in Setup mode when you set up your open your ref FPGA and reset. Then change to the active mode (any program) before you do anything else in your program (i.e. the very very beginner). A picture is attached.

  -Troy

• Can't erase videos of 'pictures '.

  I download the photos and videos for 'Photos '. I was working on a big project and imported a lot of video files and no longer need them now. I tried to remove several times but it doesn't work. He asks if I am sure I want to delete and select Delete/Yes, but nothing happens. I am able to clear pictures, but I can't remove these stubborn videos. Ive restarted my computer several times, but no luck.

  Just to be sure - you have emptied the album "recently deleted? If not, do that first.

  What's your library synchronization with iCloud photo library?

  Where your photo library is stored? On an external disk or in your pictures folder?

  You remove while watching an album or smart album, or from the view of Photos?

  Try to remove it by using the key combination command + DELETE ⌘⌫. Which should remove the videos without any independent question of deleting an album or moments.

• Satellite L450 - Webcam picture is grainy and dark

  I don't know if it's the web cam this model isn't very good but the web cam is very grainy and dark. I tried to play all usual with the settings but nothing enhances the i.e. lack, grainy image of any color and just generally poor and the laptop is brand new.

  If anyone has a good clear picture please let me know seems a shame because I'm happy with the rest of the system.

  Thanks in advance

  Hello

  Just a question: have you tried that?
  => [How to change the settings for the built-in webcam If the image is very dark or black | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

  If it doesn t work I would try to update the driver for the webcam. Just check the Web from Toshiba website for an update and install it.

  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• iPhone 6 more takes the blurry picture is long distance

  Someone at - it a similar problem as mine?

  My iPhone more than 6 can take clear picture "close-up", but not "long distance". I can't take pictures of the beautiful views, or part of the pictures.

  I am sure that the camera lens is clean and I also re - start my phone before, but nothing has worked.

  This phone is out of warranty Apple 1 year, and I don't know how much it costs to fix this

  I don't physically drop or damage this phone, and why it will happen. Is this some sort of defective product?

  https://www.Apple.com/support/iphone6plus-isightcamera/

• Photobook: How can you look at layouts different photobook BEFORE you put all your photos? I want to see inside pages of styles before choosing one to put my pictures in.

  I have pictures, using Mac El Capitan. I put all my photos in an album, but when I go to create a book and click one of the styles he immediately puts all my photos in there without giving me a chance to peruse the various options before choosing a.

  You cannot prevent, the pages will be automatically informed initially.

  But by clicking on "Set Clear pictures" to remove pictures placed the pages of the book.

  If you then switch between different themes, the pages are not met again.

  

  Alternatively, create the book without selecting the photos in advance.  You can drag the photos in the album later in the film under the book, once you select the theme that you want to use.

• Shift register clear before rerunning the VI

  I have this VI very simple read the voltage of an acquisition of data until I stop the loop, then it saves the data to a .wav file.

  My problem is: whenever I stop the VI, I expect the registry to shift to clear. But if I restart the VI it saves the old data in the shift register and the new data in the .wav file. I want to just the new data when I run the .VI, without having to close the program each time.

  Help, please.

  Right-click on the control to the table, and choose "clear picture" (or any option os tht called) and try again. It's a cluster of an array of types of waveform data. (Later), you can right-click and choose "display as icon".

  Ben