TC drops with new wifi router

Hello

I recently changed the wifi set up in my house when I got a new router/modem Comcast wireless.

my equipment:

-The new series of wireless router/modem Arris TG862G bridged mode

TC - 4th gen (2 TB) running 7.6.4

The TC is connect to Arris via Ethernet. The TC also has a feature of AT & T MCell and Powerline wired extension that goes to the basement. The TC is on the second floor.

When I put this in place, I renamed my network, comments and TC names digital alpha shorter and passwords changed to the alphanumeric passwords only on the advice of this forum. In addition, the network connects to multiple IOS devices, Windows Mobile, smart TVs, etc., all running newer versions of IOS.

That is the problem.  The new configuration often removes the wifi so that no camera can detect the network. By frequently, I hear once every few hours.  This was solved by rebooting the system.

So far, I tried switching routers so Arris is router and TC is the bridge, but same thing happens.  Curiously, I even reinstalled old no wifi modem to test but still had the same problem. This facility has been very reliable before the new name, but hard to believe that a name change is the cause.

I welcome suggestions.

Sorry we're a little slow on your problem.

The new configuration often removes the wifi so that no camera can detect the network. By frequently, I hear once every few hours.  This was solved by rebooting the system.

What happens if you simply restart the TC?

So far, I tried switching routers so Arris is router and TC is the bridge, but same thing happens.  Curiously, I even reinstalled old no wifi modem to test but still had the same problem. This facility has been very reliable before the new name, but hard to believe that a name change is the cause.

Name changes will not cause sudden dropouts wireless... It's the change of network and a router that does not get along with the TC. Apple routers can be hard enough.

I would go back to the installation with the Arris as the main router... and TC in bridge.

Once you have this configuration, change the connection of the arris to TB... Ethernet that was in the TC wan port... Move it to LAN port.

We are seeing problems with the side WAN.

Unless it's just age... The change of network may do strange things... and the TC Gen4 has a lack of reliability when it reaches the end of life. A number of them die completely and others have network problems... either the wireless or ethernet side... It can simply wear... (of course it of components such as power supplies and cause capacitors which are at the origin of these issues). Fixing the level of the Board of Directors is a thing of the past... the cost effectiveness of the modern manufacturer has deleted as viable repair. With the exception of a few weird things I can fix it... It is usually not worth.

The summary of what you need a new TC or a new management mode of backups.

Happy to work through the questions...

If the TC wireless is stall... do you mean no signal... or no internet connection...

The next time he falls... from a client on the TC main router ping or ping another client in the terminal and tell me if any of this signal or what is lost.

Tags: Wireless

Similar Questions

  • New wifi router installed. Why do connect to sites but lose the connection as I browse even though Windows said excellent signal. To deactivate/activate

    New wifi router installed. Because then I can usually connect sites OK but when getting around a site or to another, I lose connection even though Windows said signal is excellent. Toggle heals the problem temporarily. Two tablets under the same roof using wifi even have no problem. There is no consistency in when the problem arises in any session. It happens in Firefox and Thunderbird. Close and restart the program does not help.

    I tried the reset and it was not good. Then I learned that my wife had a similar problem with his ipad I did what I should have done at the beginning, I restarted the router again. Hey presto, problem solved.

    Now, I'm off to eat some humble pie. Thank you, guigs2

  • want to connect to hp JO 6800 via wifi to my laptop with a wifi router. is this possible?

    want to connect to hp JO 6800 via wifi to my laptop with a wifi router. is this possible?

    Hello

    Yes you can, you can configure it for your printer:

    Please follow the instructions in the following book:

    http://h10032.www1.HP.com/CTG/manual/c00256077.PDF

    Good luck.

  • Presario cq70 116ea, refuses to connect to new wifi router unless the router's security mode.

    Presario cq70 116ea, using Vista refuses to connect again wifi router unless the router's security mode. Error message "Unable to connect" or "timeout".

    Hi, Don:

    Please download and install this driver, and that should solve the problem.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

    Kind regards

    Paul

  • DNS server does not not with new wireless router!

    I've just set up a new internet connection via a cisco wireless router turned my my ISP. Since then, I was not able to access the web pages. I am connected to the network, but continue to receive the message that the DNS server is not responding. Other laptops that use older versions of windows have no problems.

    I tried in many of the solutions provided on other posts, but nothing is done and have just restored my system to hopefully undo changes so that I can start again.

    Any advice would be greatly appreciated. Thank you

    Jenny

    Hi Jack

    I am well connected via UPC which was formerly NTL, and I watched Hostmaster Chello Broadband and it seems to be part of the UPC also. I don't know if I have a network manager.

    However, my problems seem to have been resolved, I deleted the files and programs that were downloaded from the internet, including protection against viruses and a program called utorrent and have replace my virus protection with microsoft security databases. Ran malware bytes, I know not if I have to run this next to most of the security.

    I hope that my problems have been fixed, but I'll be back if they occur again. Thanks for your time and your help.

    Jenny

  • Performance index Windows CPU drops with new hard drive installed on Windows Home Premium 64 bit.

    Hello world. I have a Toshiba laptop with Win 7 Home Premium 64-bit. 1 GB of GPU, 6 GB of ram, Intel i7 Q740 1.73 GHz. operating system has been pre-installed.

    The old hard drive was 600 GB 5400 RPM 8 MB Cache. The new disk of 1 TB 7200 RPM 32 MB Cache. With the old drive the cpu had index of the 7.1. With the new disc, he fell to 5.6. all the other components even rated the two discs. Both discs have a 512th form. Searched everywhere for an answer and would like an answer, cause im very curious and puzzled. Health perfect new drive using disk setiniel and crystal HD... info old drive had bad sectors, but cpu always valued at 7.1. If someone can answer, I would be very grateful.

    SV

    WEI is a completely arbitrary number and because it has been eliminated in the 8 win & win 10.  I would not be concerned about the number unless your computer is actually slower.  Your hard drive has nothing to do with the rating of the CPU.

  • Why Windows 7 keep forgetting that I deleted the resurrection and my new WiFi password?

    I just changed my internet provider and they gave us a new WiFi router.

    I tell my Windows 7 computer to connect to the new network and do not forget the password for it, I also deleted the old network.
    Now I am pulling my hair because for some reason any Windows decides to forget that I told it to remember the password, and after having restarted my computer, I have to connect and manually enter the password again. Moreover, the former network that I deleted keeps reappearing! I tried implementing a new network manually through "Set up a connection" but it does not work.
    I will do this every time I start the crazy machine. Can anyone help?

    Hello, I have just reinstalled my wireless card drivers and it seems to work now.

    Thanks for your help.
  • problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

    Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

    On the Pro iPad, tap settings > general > reset > reset network settings

    You will need to re enter your Wi - Fi password.

    Then try to connect to your Wi - Fi network.

    If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  • How can I configure an apple tv 4 with iPad personal hotspot or wifi router?

    I try to set up apple tv with iPad personal hotspot

    but it didn't wotk

    Apple tv still cannot connect to the network

    I need to connect only via a wifi router?

    I have assune the hotspot of the iPad has been activated during the implementation of ATV. How it did not work?

    Have you seen the network ID in the settings of wifi hotspot network? Have you been able to enter the right key, etc.. ?

    ATV type of expects a wifi network that is always available, but I don't think that this is a fundamental requirement. It may be that ATV recognizes the temporary nature of the personal hotspot and rejects him.

  • HP Envy 4500: Cannot print with the new Wifi

    I have a new Netgear09 router and everything connected correctly. My HP Envy 4500 wireless printer has been a success with the wizard, and I printed out the specs very well. My computer (Windows Vista) is connected to the Internet fine... but when I try to print a document from the computer it continually-error. What Miss me? I am able to print from my Ipad... but not the PC.

    Welcome to the HP community @Dmk3,

    I understand that you can't print from your Windows Vista system to your desire of 4500 from the evolution of your router. I would like to help!

    Try running the print and Scan of the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Please send me the results.

    Try to print again, and if there are problems or errors, please tell me what they say precisely and I'll read them for you! Also ensure that you are trying to print outs in addition to a program.

    Best wishes to you!

    Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

  • Satellite A110 - switch WiFi does not work with the new WiFi card

    Hello everyone

    I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.

    New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.

    Help, please

    Hello

    Do you have also enabled the WLAN functionality by pressing FN + F8?
    Check it!

    In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
    So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop.

  • I put four new ink cartridges, now the photos are drops with ink, literally dripping.

    My ink was low, so I put four new cartridges in French - Photo, Cyan, Magenta, yellow.  Using HP Advanced Glossy Photo paper, and photos are drops with ink.  Please notify.

    Four new ink cartridges caused my photos to drip with ink.

  • LaserJet p1102w: how to access the interface web printer with new router

    I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

    Internet access works ok desktop and laptop (wireless).

    However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

    How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

    I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.


    HP LaserJet p1102w

    I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.

  • Problem with printing with new Wi - Fi router and 7410

    My HP 7410 print perfectly with my old router - but who died.  Today, I installed a new Netgear N750 with WPA2 security.  I finally had to downgrade times the speed and the performance of the router and other equipment for the HP7410 could recognize the network under WEP security.  However, now it does not print, even though it recognizes the network.  How can I resolve this short of buying a new printer?

    OK, let's try the following: setting up press façade 7410, 8, 1, 1 to print a network configuration page (you have probably this).  Look at line 3 and put this IP address in the browser of your computer.  This loads the page 7410's built-in web server?  If this isn't the case, then your computer Windows 7 Click Start, type cmd in the search box.  When cmd.exe will appear in the results do a right-click on it and choose "Run as Administrator" and give permission.  Once the administrator command window opens click in the box and type

    IPCONFIG

    It lists the IP address of your computer.  Compare this with the IP address of the printer.  They should be the same for the first three sets of numbers, for example 192.168.1.11 and 192.168.1.3.  If the first series of numbers are not the same the printer and the computer are not correctly on the same network.  (This can happen if the printer is not picking up an IP of your router, or in some cases correctly when it receives an IP address from another router, maybe a neighbor.)

  • Unable to get online with new router-"Local access".

    Original title: can't get online with new router.

    I'm having a lot of trouble to get online with my laptop.

    My roommate has recently got a new EE Brightbox. It works perfectly well with his laptop and mobile phone. Also works with my mobile phone. However, when I try to use my laptop it only gives me "Local access". I have no problem connecting to the router, but it just won't let me go online.

    Tried to disconnect/reconnect the connection Wireless on laptop from scratch with wired connection to router, router and router reset re-booting. None of them have worked.

    Any help would be great?

    Laptop works on Vista.

    Hi Rob,

    Thanks for the reply.

    Have you tried methods of resolution of the problems mentioned in the previous answer?

    Please update the State of the question, we are here for you help!

Maybe you are looking for

  • Why Firefox tell me that I still have an old Adobe Flash Player

    Adobe and Windows Web site tell me that I have Flash Player installed 18.0.0.232. Why then the Plugin Firefox status checks status I have Flash Shockwave Flash Player 16.0.r0 16.0.0.235? How can I get rid of 16.0.r0?

  • Interrupt the interrogation of the drive - acer lappy

    Hi all. My laptop decided to investigate the disk hard whenever it is turned on. It gives me 1 second to press a button and thus circumvent this operation. the investigation of disk operation takes 5 hours to result (but 1 minute to 75% full!). I hav

  • OWS is not c/documents and settings, etc.

    This applies to photos and printed documents. I use XP Home.

  • Update the drivers for my HP Pavilion

    I have problems with my HP Pavilion, the p6112p, the NP211AA of office. Drivers must be updated on my audio/visual programs, in addition to the general instability; as the gel, etc...  I noticed that you have given information to a person on his comp

  • reinstallation of Windows 7 premium edition family

    I installed the free version of windows 10 and I don't like it and now I want to go back to what I had before which is windows 7 Home premium. This edition of windows was already on my pc when he bought and I do not have a disk but I have a product k