TC in apartments

Similar Questions

• Laurel Oaks apartments

  I need the password guest at Laurel Oaks Apartments, the name is bedhlem-guest. Let me know as soon as possible please

  No one here can give you that. Ask for the password of the owner of the network.

• My suburban encounter problems connecting to wireless internet apartments permanently

  My suburb meets at our apartments Internet wireless connection problems permanently... Nobody other than this problem but me. I think that t needs to get an appropriate ip address. Or Windows Vista cannot obtain an IP address from certain routers or some non Microsoft DHCP servers... Is there a way to fix HRT without having access to the Internet or being able to touch our router main apartments at the office?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:
  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I also suggest you to refer to the article and try to reset the settings of Internet Protocol.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Method 2:

  Step 1:
  a. connect to your router (by typing 192.168.0.1 or 192.168.1.1 in the address bar) and connect. Check your user manual or documentation if you don't know the references of logon.
  b. make sure you are in the installation program > basic configuration category.
  c. scroll until you see "DHCP Server" - if it is disabled, select 'enable'.
  d. enable DHCP (Dynamic Host Configuration Protocol). If you wish, you can change the number that starts the DHCP IP assigning (this is optional).
  e. use the DNS (Domain Name System) servers provided by your ISP (Internet Service Provider). There are many DNS servers out there. It is preferable to use your ISP if possible.
  f. scroll down and click 'Save Settings'.

  Step 2:
  a. click Start and then click Control Panel.
  b. go to network and sharing Center and then click on change adapter settings.
  c. right-click on Local area connection and select Properties.
  d. Select Internet Protocol Version 6 , and then click Properties.
  e. Select DNS server automatically get an address , and then press Ok.
  f. Select automatically an IP address to get.
  g. Repeat steps for Internet Protocol version 4 as well.
  h. testing the issue.

  Let us know if it helps.

• Is there a problem with my credit card for apts

  Is there something wrong with my credit card for the purchase of the apartments?

  I'm unable to make purchases on my Apple, I touch mini

• Unable to send mail, timeout, smtp does not... already for a week does not work.

  Dear Sirs

  all of a sudden I also can't send mails, timeout with the smtp server of my e-mail address, provider's web. of
  Firewall disabled, uninstalled antivirus...
  Server smtp.web.de
  port 587
  STARTTLS
  other ports also does not, any more than ssl
  router may not be the problem, because I work with two different routers in two different apartments, so that now the two of them, all of a sudden does not allow to send mails, seems highly unlikely to me.
  system windows 7 Home premium 64

  Thank you in advance, I'm really tired of playing with her...

  Thank you very much, now after 10 days of work do not now it works again...

  -)

• Display of the alterations

  In the logic Pro X (10.2.1) documentation different ways to display the Accidentals are mentioned. I have Logic Pro X 10.2.2 and alterations drop-down I can see that by default, sharps and sharps to flats apartments. All the other options described are simply not there. Is there something wrong with how to configure my project?

  If you do not see this...

  Then, go to Preferences-> advanced tools and make sure that they are all enabled.

  

• How can I remove a symbol of the partition

  If I placed a symbol in a note on the score, for example a symbol staccato or legato, how can I remove it much later, once the cancellation is no longer a realistic option?

  I tried selecting the symbol staccato in the box part and then using the gum, and which erases the note instead.

  I also tried the functions > note attributes > reset all attributes and which deletes also all sharps to flats and apartments to sharp objects I did.

  Just to clarify, I need to make an entire partition, so it would be tedious to have to restore all the alterations to reset manually.

• Qosmio F30: Can not connect to internet with WiFi safely

  I recently purchaced a Toshiba Qosmio F30 laptop and have spent the better part of two days trying to connect to wireless internet. After constantly call Wanadoo (my provider) and accusing them for all this, I thought that the laptop itself is at fault.

  What happens is when I try to enter my network key (WEP), default is a different key that I can't see that it's all in the points! This continues to be and im am totally unable to enter my network key. Until it is I turn off security on my livebox thingy and connect unsecurely and as I live in close proximity apartments, other people can and probably will connect to my internet, and I am also told that makes me more at risk of viruses and other.

  I apologize for my lack of technical jargon, and that I can not give a more descriptive... uh... description, but I'm just a beginner and not the most in computer science.

  Any help would be appreciated more!... Why is nothing simpler!

  Hi Luke,.
  Have you tried WAP (shared key) instead of WEP.
  In this way, you will need to make your own key instead of having the it generated by the router.
  It is also safer.

  To do this, you must enter the settings of your router (usually http://192.168.1.1 or http://192.168.0.1), enter the password provided by Wanadoo, then click Security. Change the setting WEP WAP (or shared key) and enter a 10digit password then you will need to enter it again when your computer tries to connect to the router again.

  It is best to use a wired connection to change settings, then disconnect the cable and wireless.
  If you notice that you are connected wireless to the router, and your internet connection is dead, temporarily disable the LAN (reactivate when you are satisfied with your connection works). This would happen if your computer includes your wireless network connection to other computers and the wired connection like you internet connection (even if there is no wire connected).

  It is also important to change the administrator name and password to access your router (this would prevent your neighbors children playing to change your settings).
  Let me know if you have more problems.

• ICloud deleting deletes photo library photos from iCloud, photo sharing

  I have iCloud photo library on my Mac and on my iPhone.  I created an album of photos and videos to spend several weeks going apartment hunting in my neighborhood.  I have friends who are also looking for apartments in my neighborhood and these photos and videos would be useful for them.  So I want to share all these content with them using iCloud, photo sharing.  However, I have this great set of photos/videos over on my Mac or my iPhone, because I have an apartment and my use for these photos.

  So I want to:

  1. create a shared album (let's call it 'Videos apartment').

  2. Add all my photos and videos of my apartment hunting that is currently in my library to iCloud.

  3 share only iCloud library with my friends (they can add, comment, do what they want)

  4 delete the original files from my library to iCloud I don't don't need or want these photos over on my personal devices.

  My question is: if I delete the photo in step 4, which will also remove the same pictures of the iCloud Shared Library?

  It would be useful to know if the iCloud share photos are copies separated from my photos of the library, or are the same.

  Sharing albums and Photo library iCloud iCloud different services and are stored independently from each other.

  When you create a shared album and share with your friends, you will see the shared album and photos in your photo library, but you can remove the originals from your photo library, as long as you do not remove the shared album photos. In the shared album photos can be slightly smaller than your original photos, because there is a limit of size of pixels for shared photos.

• German satellite in Thailand (cable or AC adapter / CC?)

  Hello

  I have a German version of Toshiba Satellite, which shouldn´t be used without grounding. But in most of the hotels or apartments in Southeast Asia, there is absolutely no grounding.

  Should I buy just the cable here or the whole power adapter?

  What else should I be careful? What is the difference of the same model phone in Europe and in Asia, only the power adapter or another material? (bcs of the heat and humidity).

  Thank you.

  Hello

  Check out this site:
  http://www.tekstation.com/pd_extra.cfm

  There is that a trip of extra wit universal AC adapter plugs.
  According to the page of the universal adapter is compatible with many portable Toshiba. Well, I guess that this adapter you can use also in Asia.

• Pavilion G7-1355dx: card network problem

  Hello

  I had previously posted the question below and took the lead on mark as resolved. The answer I got was good, but because of many different configurations of my model of my laptop model, it was not correct for mine.

  I have an old HP Pavilion 1355dx G7 and I use it during the games XBOX a stream. It has only one network adapter Wireless 2.4 ghz, if coupled with that much congestion in my neighborhood, it broadcasts only during the flawless. New info: my laptop has an AMD processor, not an Intel processor.

  This laptop does support 5 GHz wirelesss network cards compatible with AMD? I am hoping to move to a 5 ghz however I want to make sure that it supports and is on the white list before I buy one.

  Thanks for the info. That's what I was afraid of. Can be an excuse to get a new laptop and let the kids use it. It is not a big deal, for the most part, it works well, but you can see in sensitive applications.
  
  I used an app WiFi Analyzer and each channel is overused. I'm surrounded by more than a dozen networks (tons of apartments) and use channel 11 that is congested, but less crowded than 1 and 6.

• iPhone 5 s showing the location bad find my iPhone

  When I'm in my school after school, my phone watch I am across the street in the apartments across the school.  I had never moved from my school, and I have no idea where these apartments are still but it locates me in these apartments when me and my phone is in my school.  This happened twice with the same exact location, and as I said I've never set foot in these apartments or in this general vicinity in my life.  As an additional inconvenience, it look suspicious to my family when they check my site.  It appears through the find my iPhone.  My phone is now two years old, and I didn't modify parameters based on location I know.  If this could have something to do with the new software or accidentally turn me on a certain framework?

  What can happen is that your iPhone can not use GPS is to find your actual location when you are inside the building (GPS must have line of sight to communicate with satellites in the sky).  So if you're indoors all day, you iPhone must instead rely on IP geo location-based network, you're on from the cell towers or WiFi network.  This type of situation is much less precise that real GPS in your phone and your will be often average power off.  There is nothing you can do about it.

  You can do a test to see this in action by standing outside the school, opening Maps app and looking to see it is exact.  Then, close the cards, go inside the school, wait a minute or two, and then again open the cards and see where he thinks that you are (probably far away).

• WiFi connection sometimes drops

  I live in an apartment complex and species piggyback arrangement with my neighbor.  Only a wall between our apartments.  Wasn't a problem when I had a HP laptop.    Now I have a new desktop HP Pavilion 500-164 and quite often when I run UTorrent my connection drops.  I don't want to buy an Extender.  How can I configure my office to boost my connection?  
  

  BreBruce,

  Saw your Post on the Utorrent forum and you have received a response.  Good.

  Big_Dave has a good point - many ISPS will be throttle (or otherwise interrupt) connections that fall outside the parameters of the agreement.

  If you have not yet seen so, take a look at this:

  Internet Access keeps drops when downloading on uTorrent

  Among the possible points of interest:

  1. right click PIA > settings > advanced > change type of TCP connection

  2 Contrict total number of client connections

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• HP Envy 5540: Printer Hp Envy 5540 randomly printed the Network Configuration Page

  Hello!

  I bought this printer about a month ago. Set up the connection to the printer wireless with my wifi, and my understanding is that the printer is protected like my wifi and use the same password in order to print something. I kept my printer connected and 'standby mode' since I put in place. The night last at about 23:00 when I was in bed, the printer turned on randomly and printed a "wireless network configuration page" that has had a lot of information, including the IP address and listing my name wifi as well as the names of my neighbors wifi in the surrounding apartments.

  I'm trying to understand why this printed, because I certainly did not do. Anyone have access to my wifi, or has someone may simply try to print something and selected my printer as it should appear on the "list available connections on the computer of anyone, given that the printer is turned on? How could they print this sheet of network configuration if my printer is password protected?

  I'm mostly concerned about someone who has access to my internet if they could print this page somehow, but maybe it happened just when they tried to connect to it, and it did not work while trying to fix MY printer?

  I would appreciate any idea on the issue.

  Thank you!

  Hi @printerprob5540,

  Welcome to the HP Forums!

  I saw your post on how your HP Envy 5540 randomly print a Network Configuration Page. I'm happy to help with this problem!

  I find it very strange considering the only way to print the Network Configuration Page, AFAIK, is with the following steps:

  • Make sure that there are size A4 or US Letter, unused, plain paper in the feeder.
  • On the printer Panel, drag the screen to the left and then press Setup.
  • Touch tools.
  • Drag upward on the screen and then tap Network Configuration report.
  • A Network Configuration Page prints up to three pages of information.
  Figure: Example of a Network Configuration Page

• Hi I have my computer will not pick up my wireless signal, but it captures others, in small residence also other devices pick up thanks for link wrong signal strong whats for your help

  Hello

  my computer will not come up to my wireless signals same signal is strong, but it picks up other signals wireless in apartments even block
  Thanks for your help

  Hello edwardmurray21,

  Thank you for the question!

  It is disheartening to know that have problems you with the wireless signal. As I understand it, you are not able to choose wireless sugnals.

  I need to ask you some questions to help you best.

  1. what operating system is installed on the computer?

  2. which browser is installed on the computer?

  3. What is the brand and model of the router?

  Answer to us if you are having problems with the signals wireless or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.