TC M51 sluggish after installed PCIe graphics card

Similar Questions

• No audio after installing new graphics card

  I recently installed a Geforce 8800 gt xfx graphics card. After you install the graphics card, I have more audio analogue. My computer does not detect the analog audio devices. Things I've tried: reinstalling the drivers chipset audio activation built into the bios bios reset CMOS reset reinstallation Editing registry. PC specs: http://support.hp.com/us-en/document/c02628226 (Note: all specifications listed are correct except the video card and power supply) voltage is the 450w graphics card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814150280

  Yes, it is possible, that there is an overload.

  The solution is to get a sound card not cheap, I think.

  One that works with everything what add on slots (PCI/PCIe x 1) you have.

  Then get a Radeon HD6570 (didn't need additional power supply), or some other card Radeon HD if you wish.

• No Signal after installing new graphics card

  Hello and thank you in advance for your help!

  We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

  (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

  (2) checked monitor and DVI & VGA cables with another computer: they all work.

  (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

  (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

  (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

  (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

  (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

  (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

  (9) we restarted again to get once more no signal message.

  So... what should we do?

  Thank you very much!

  Triusa, welcome to the forum.

  I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

  http://support.HP.com/us-en/document/bph06788

  Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

  If your problem is solved, please click "accept as a Solution.

• Win7: Any difference after installing a graphics card?

  Hello

  I don't have a visual experience usimg a PC will open a graphics card.

  I will not watch TV or DVD or browse photos on my PC.

  I use in on browsing the web and MS Office applications.

  If I install a graphics card (low range) low profile such as the silence of 210 ENT ASUS or Gigabyte HD6450.

  May I know if IE9 fonts and photo and deskop applications would look sharper and clearer?

  My PC is an Intel Core 13-2120 with Intel HD graphics driver installed. I use a screen resolution of 1600 X 900 20 ".

  Thank you

  Low

  You have posted several times re your graphics card, so I just make a comment.

  The visual experience of the display/graphics often depends on the individual, what a person is satisfied to another may not be.

  I believe that you said that your display is much "sharper" when you used Windows XP on another PC with the same monitor

  Browsing the Web and the desktop are not graphics applications, I've seen some people complain the graphics Office 2010 from Office 2007

  HD6450 Gigabyte is not an expensive card so I guess that you have little to lose by trying it, the Asus is still cheaper and it is obviously silent

• Drawing objects in Firefox and Thunderbird after installing the graphics card MSI R6850 of AMD

  After installing the new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), pilots the latest on Windows XP 32-bit, I frequently meet with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0 drawing artifacts. The problem presents itself as a horizontal black bands or model checker color scattered. It occurs especially when the child (like the Download Manager) passage of another application for Firefox or Thunderbird or when to switch to a window for Firefox. It affects the entire application or only some rectangular (region clearly who was redesigned due to change of application). Then repaint (such as switch between Firefox tabs) usually solves the problem. This is just visual, the behavior is not affected. The problem never happened to any other application so far. Any ideas? Any who have experienced the same problem? Thanks in advance.

  Zbynek

  P.S. Here's the screenshots for the two problems:

  http://astrofoto.euweb.cz/tmp/black_stripes.jpg
  http://astrofoto.euweb.cz/tmp/color_boxes.jpg

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver that corrects these problems.

• HP PAVILION HPE h8-1192d: could not start after installing new graphics card

  I recently bought a Gigabyte GTX 750 Ti Black Edition to replace my old. But it will not start after installing on my h8-1192d, and stuck on the screen flash hp. Help, please!

  Hello

  NVIDIA GTX 7xx or 9xx series graphics cards will not work in your PC.  The BIOS in "chicago" mothererboard is not compatible with the video BIOS in the graphics card.  You will need to get an older card chart such as the one of the below listed OEM HP graphics cards. Depending on the graphics card, you may need to replace the power suplly.

  

• HP ENVY PHOENIX h9-1355: hard drive not detected after installing new graphics card?

  My computer at starup tells me that it cannot detect my hard drive after installing a new graphics instead of my old card.

  The news is ASUS GTX 960 old Turbo was AMD Radeon HD7770.

  Can someone please help!

  Please, I beg you!

  See your other post.

• Windows 7 Installation stuck after installing new graphics card

  Before that, my office is fully compatible with Windows 7, but after that I installed a new graphics (ATI Radeon HD 5450) I can't install Windows 7, when I started to install that everything seems fine, but after it restarted and end Installation it just stuck there!

  Any help?
  I tried to remove the new graphics card and the use of the onboard graphics to install Windows 7 still does not work?
  NOTE: I used Windows XP before installing the new graphics card.
  I'm using Acer Aspire M1800
  CPU: Intel Pentium E6300 processor
  Memory: 2 GB DDR2
  Help appreciated
  -Joey

  Hello Joey

  If right now you go back to Windows XP and the system is slow correct? You have the drivers installed since you went back to XP? If not then click here and select your system. This will bring up a list of available drivers for you. Also, I've included a link below to get the drivers for your new video card. My problem with the question is if your system has enough power to support the video card. Here are the specifications of your card. Check the configuration required for the map and you ensure that you have adequate food. Let me know if it helps. Thank you.

  ATI Radeon HD 5450 Windows XP Drivers

• Stuck on the HP logo screen after installing new graphics card.

  I installed a new graphics card today and I'm stuck in the loading screen. My old card boots gts 450 my computer very well, but my new graphics card cannot. I replaced my old diet with a 600w power supply, and it worked fine with my old card.

  It's my computer HP Pavilion h8-1210 = http://www.amazon.com/HP-Pavilion-HPE-h8-1210-Desktop/dp/B006VG0HNM

  I tried to install the latest version of the Bios with no luck. I guess it is the motherboard, but I'd be happy to work around that.

  Danny

  metall909,

  If you use an EVGA 760, so your question is probably a vbios into the video card.

  HP PC delivered after November 2012 are pretty good at speed on the last level of UEFI version. This level begins to version 8.

  I met problems with EVGA 760 UEFI and ASUS claims it is a vbios video card problem and EVGA says this is a motherboard problem.  I would not recommend using this card until EVGA releases an update of the vbios.

  If you are in a situation of pointing finger between HP and EVGA.

• blue screen after installing new graphics card

  Just install my new geforce gt 240 to replace my 9400gt. After reinstalled vista driver & restart, my system to start start then goes to a white screen for 2-3mins fight & displays a blue screen quickly and then restart & repeat once again. Vista will boot into safe mode without problem & also start normally when I reinstall my old card. my system is fully updated & all drivers are up to date.

  A way to solve this problem

  Thank you very much for the help, discovered that the graphics card was defective. Tested my friends GT 220 card in my system & installed without any problems. Anyway, I picked up the card & brought a radeon HD5450 instead, installed without a problem, then I say problem solved.

  Thanks again wb2001

• Get the 43 pilot error after installing new graphics card

  Original title: graphics card problem

  Help, please. I just put in my new nvidia Geforce GT 430 graphics card. It came with a disc that would install all necessary records, when the computer has restarted a message says that the driver has been arrested because of his mistake, 43. I don't know what to do to solve this problem. just in case my processor CPU Intel Celeron D 3.33GHz and has a 32-bit operating system. What should I do?

  Hello

  / Settings (BIOS/CMOS) often F2 as you start so watch the display as you start
  the computer. You may need to check with the system manufacturer (Motherboad support
  If a system custom Maker), their documentation online and drivers and ask for their
  Forums (if any).

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• No sound after installing new graphics card

  Original title: sound problems, this can be confusing abit.

  OK, so today I have installed a new graphics card, NVIDIA, comes with 2 VGA Plug ins and a MiniHDMI.
  Once I installed it, my sound thing said, exit No Audio is installed, so I reinstalled it, but for some reason any... He sends the sound via HMDI cable, but I did not! I used to have "Realtek HD audio", so I went on the website to download, got one, but has no effect! Please help me!

  Too bad... It's okay now, thanks anyway, I got it to work.
  PS, I never siad anything on an error message.

• Computer does not start after installing new graphics card

  HP-envy h8-1503
  I7 - 3770 k 3.5 GHZ
  10 GB of Ram
  Windows 8.1
  
  I tried to install a new edition of diamond Raedon 7770 to replace my old 7570 and when I try to start the computer I get 6 long beeps and the power light flashes 6 times. Everything is plugged in right and the video card turns on. It will not be output to the screen tho and the computer does not start!

  I fixed it, the problem was the safe boot in my bios, when I disabled the system booted and worked perfectly since! Thanks for the advice tho!

• ThinkCentre M51 SFF 8104 - PCI graphics card

  I'm hoping to add a second graphics card for my Ultra small, M51, which has only a 32-bit PCI (not PCIe) slot. While I am aware that much slower speed of the PCI in the PCIe (or even AGP) bus stop from playing any modern (say > 2005) games, I'm not really that interested in 3D performance. The main reason I want the additional card is so I can use an output for my projector (not HD) and maybe even plug a third monitor integrated card (Intel GMA 900) - if I'm not forced to disable this. Is this likely to work? Has anyone here successfully added a PCI graphics card to a ThinkCentre, or any other computer with an Intel 915GV (* blech *) motherboard chipset?

  I know that some people suggest you need a bigger power supply for some of the fastest PCI cards, but I'm not sure about this. For a card that will be classified as PCI, it must be within the electrical specifications for the PCI bus, which includes the voltage and current, no? If I'm wrong about this, I would be happy to settle for something more modest, as long as it provides DVI output, some 3D acceleration, but also MPEG decompression. Any input on this very appreciated!

  Another restriction could be the space required for the card, the case accepts a PCI full-height, half-length, but will be a little better maybe with a card low profile to leave a little more room for air circulation. I certainly don't think that a passively cooled card would work as there is virtually no room for air circulation. And even with an actively cooled card, I recognize that I might need to add a few extra air holes.

  Why go through all this trouble? Well, I love the little ThinkCentre Ultra compact. The case is very well built, it is very pretty in this industrial kind so that IBM had so well - and it's very nice and quiet too (despite the P4HT Prescott). Gigabit LAN, 6 USB, 3.5 "HDD bay (got a 1 TB drive is and the fact that I can use my laptop DVD burner into the UltraBay slot are all nice positives.) I'm not a fan of large desktop computers and can not afford a mini-ITX with PCIe system...

  For any help or suggestion very appreciated!

  Lomax

  P.S. PCI graphics cards I've been looking at are GeForce 8400 GS Sparkle and 9400 GT cards as well as Radeon X 1300 VisionTek and X 1550. And then there's the new ATI Radeon HD 2400 PRO too!

  Update: I have now installed a graphics PowerColor HD 2400 Pro PCI in my system. I had to replace the passive radiator with a combination of radiator & fan (the card has holes of standard editing for it), because there was not enough room for it. Also, the case is so narrow that there is no way the airflow around the PCI slot would have been sufficient to adequately cool the GPU. Unfortunately I could not find the drivers for the use of this card under Windows 2000 (my OS preferred) so I'm stuck with XP - but the card works fine and I can get today with the built in Intel GMA chip, giving me three exits (2 x VGA, 1 x DVI) video. Perfect!

  HTH,

  Lomax

• Can you get a sata adapter and replace it with a PCI Express so I can install a graphics card in the caddy hd for my laptop. Y at - it means to get an internal or external graphics card?

  Hey!

  I know that you can remove a dvd cart and replace it with a HD you can get a sata adapter and change a PCI express so I can install a graphics card in the caddy hd for my laptop. y at - it means to get an internal or external graphics card? I do not have a slot express pci laptop because a laptop is relatively new.
  
  Original title: laptop computer graphics card
  other cool mods I can do for my laptop. I've already upgraded to ssd and ram and processor.

  Hello

  I do not know such an adapter exists, but it's a hardware problem - I suggest you contact the manufacturer of your laptop with this issue, as well as questions about additional upgrades, you could do.

  These are all the hardware problems, and this site deals with software issues related to the Windows operating system. I'm sorry this isn't the answer you're looking for, but...

  Let me know if this helps you.

  Kind regards

  BearPup